[netdrvr] Remove Linux-specific changelogs from several Becker template drivers

When in-kernel net drivers branched from Donald Becker's vanilla driver
set, in the days before BitKeeper and git, a driver changelog was
maintained in the driver source code.  These days, the kernel's
changelog is far superior and much more accurate, so the in-driver
changelogs are removed.

Another relic of the Becker/kernel split was version numbering, using
"foo-LKx.y.z" notation, resulting in weird version numbers like
"1.17b-LK1.1.9".  These drivers are for older hardware, and see few
changes these days, so the version numbers were all bumped to something
more simple.

Finally, in xircom_tulip_cb specifically, an additional cleanup removes
the always-enabled CARDBUS cpp macro.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Jeff Garzik 2006-06-27 07:57:22 -04:00
parent 36e1e84768
commit 03a8c6611a
8 changed files with 24 additions and 522 deletions

View File

@ -9,49 +9,10 @@
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
*/
/*
Rev Date Description
==========================================================================
0.01 2001/05/03 Created DL2000-based linux driver
0.02 2001/05/21 Added VLAN and hardware checksum support.
1.00 2001/06/26 Added jumbo frame support.
1.01 2001/08/21 Added two parameters, rx_coalesce and rx_timeout.
1.02 2001/10/08 Supported fiber media.
Added flow control parameters.
1.03 2001/10/12 Changed the default media to 1000mbps_fd for
the fiber devices.
1.04 2001/11/08 Fixed Tx stopped when tx very busy.
1.05 2001/11/22 Fixed Tx stopped when unidirectional tx busy.
1.06 2001/12/13 Fixed disconnect bug at 10Mbps mode.
Fixed tx_full flag incorrect.
Added tx_coalesce paramter.
1.07 2002/01/03 Fixed miscount of RX frame error.
1.08 2002/01/17 Fixed the multicast bug.
1.09 2002/03/07 Move rx-poll-now to re-fill loop.
Added rio_timer() to watch rx buffers.
1.10 2002/04/16 Fixed miscount of carrier error.
1.11 2002/05/23 Added ISR schedule scheme
Fixed miscount of rx frame error for DGE-550SX.
Fixed VLAN bug.
1.12 2002/06/13 Lock tx_coalesce=1 on 10/100Mbps mode.
1.13 2002/08/13 1. Fix disconnection (many tx:carrier/rx:frame
errs) with some mainboards.
2. Use definition "DRV_NAME" "DRV_VERSION"
"DRV_RELDATE" for flexibility.
1.14 2002/08/14 Support ethtool.
1.15 2002/08/27 Changed the default media to Auto-Negotiation
for the fiber devices.
1.16 2002/09/04 More power down time for fiber devices auto-
negotiation.
Fix disconnect bug after ifup and ifdown.
1.17 2002/10/03 Fix RMON statistics overflow.
Always use I/O mapping to access eeprom,
avoid system freezing with some chipsets.
*/
#define DRV_NAME "D-Link DL2000-based linux driver"
#define DRV_VERSION "v1.17b"
#define DRV_RELDATE "2006/03/10"
#define DRV_VERSION "v1.18"
#define DRV_RELDATE "2006/06/27"
#include "dl2k.h"
#include <linux/dma-mapping.h>

View File

@ -20,22 +20,15 @@
Support and updates available at
http://www.scyld.com/network/hamachi.html
[link no longer provides useful info -jgarzik]
or
http://www.parl.clemson.edu/~keithu/hamachi.html
Linux kernel changelog:
LK1.0.1:
- fix lack of pci_dev<->dev association
- ethtool support (jgarzik)
*/
#define DRV_NAME "hamachi"
#define DRV_VERSION "1.01+LK1.0.1"
#define DRV_RELDATE "5/18/2001"
#define DRV_VERSION "2.0"
#define DRV_RELDATE "June 27, 2006"
/* A few user-configurable values. */

View File

@ -20,120 +20,9 @@
Support information and updates available at
http://www.scyld.com/network/netsemi.html
[link no longer provides useful info -jgarzik]
Linux kernel modifications:
Version 1.0.1:
- Spinlock fixes
- Bug fixes and better intr performance (Tjeerd)
Version 1.0.2:
- Now reads correct MAC address from eeprom
Version 1.0.3:
- Eliminate redundant priv->tx_full flag
- Call netif_start_queue from dev->tx_timeout
- wmb() in start_tx() to flush data
- Update Tx locking
- Clean up PCI enable (davej)
Version 1.0.4:
- Merge Donald Becker's natsemi.c version 1.07
Version 1.0.5:
- { fill me in }
Version 1.0.6:
* ethtool support (jgarzik)
* Proper initialization of the card (which sometimes
fails to occur and leaves the card in a non-functional
state). (uzi)
* Some documented register settings to optimize some
of the 100Mbit autodetection circuitry in rev C cards. (uzi)
* Polling of the PHY intr for stuff like link state
change and auto- negotiation to finally work properly. (uzi)
* One-liner removal of a duplicate declaration of
netdev_error(). (uzi)
Version 1.0.7: (Manfred Spraul)
* pci dma
* SMP locking update
* full reset added into tx_timeout
* correct multicast hash generation (both big and little endian)
[copied from a natsemi driver version
from Myrio Corporation, Greg Smith]
* suspend/resume
version 1.0.8 (Tim Hockin <thockin@sun.com>)
* ETHTOOL_* support
* Wake on lan support (Erik Gilling)
* MXDMA fixes for serverworks
* EEPROM reload
version 1.0.9 (Manfred Spraul)
* Main change: fix lack of synchronize
netif_close/netif_suspend against a last interrupt
or packet.
* do not enable superflous interrupts (e.g. the
drivers relies on TxDone - TxIntr not needed)
* wait that the hardware has really stopped in close
and suspend.
* workaround for the (at least) gcc-2.95.1 compiler
problem. Also simplifies the code a bit.
* disable_irq() in tx_timeout - needed to protect
against rx interrupts.
* stop the nic before switching into silent rx mode
for wol (required according to docu).
version 1.0.10:
* use long for ee_addr (various)
* print pointers properly (DaveM)
* include asm/irq.h (?)
version 1.0.11:
* check and reset if PHY errors appear (Adrian Sun)
* WoL cleanup (Tim Hockin)
* Magic number cleanup (Tim Hockin)
* Don't reload EEPROM on every reset (Tim Hockin)
* Save and restore EEPROM state across reset (Tim Hockin)
* MDIO Cleanup (Tim Hockin)
* Reformat register offsets/bits (jgarzik)
version 1.0.12:
* ETHTOOL_* further support (Tim Hockin)
version 1.0.13:
* ETHTOOL_[G]EEPROM support (Tim Hockin)
version 1.0.13:
* crc cleanup (Matt Domsch <Matt_Domsch@dell.com>)
version 1.0.14:
* Cleanup some messages and autoneg in ethtool (Tim Hockin)
version 1.0.15:
* Get rid of cable_magic flag
* use new (National provided) solution for cable magic issue
version 1.0.16:
* call netdev_rx() for RxErrors (Manfred Spraul)
* formatting and cleanups
* change options and full_duplex arrays to be zero
initialized
* enable only the WoL and PHY interrupts in wol mode
version 1.0.17:
* only do cable_magic on 83815 and early 83816 (Tim Hockin)
* create a function for rx refill (Manfred Spraul)
* combine drain_ring and init_ring (Manfred Spraul)
* oom handling (Manfred Spraul)
* hands_off instead of playing with netif_device_{de,a}ttach
(Manfred Spraul)
* be sure to write the MAC back to the chip (Manfred Spraul)
* lengthen EEPROM timeout, and always warn about timeouts
(Manfred Spraul)
* comments update (Manfred)
* do the right thing on a phy-reset (Manfred and Tim)
TODO:
* big endian support with CFG:BEM instead of cpu_to_le32
*/
@ -165,8 +54,8 @@
#include <asm/uaccess.h>
#define DRV_NAME "natsemi"
#define DRV_VERSION "1.07+LK1.0.17"
#define DRV_RELDATE "Sep 27, 2002"
#define DRV_VERSION "2.0"
#define DRV_RELDATE "June 27, 2006"
#define RX_OFFSET 2

View File

@ -22,129 +22,13 @@
Support and updates available at
http://www.scyld.com/network/starfire.html
[link no longer provides useful info -jgarzik]
-----------------------------------------------------------
Linux kernel-specific changes:
LK1.1.1 (jgarzik):
- Use PCI driver interface
- Fix MOD_xxx races
- softnet fixups
LK1.1.2 (jgarzik):
- Merge Becker version 0.15
LK1.1.3 (Andrew Morton)
- Timer cleanups
LK1.1.4 (jgarzik):
- Merge Becker version 1.03
LK1.2.1 (Ion Badulescu <ionut@cs.columbia.edu>)
- Support hardware Rx/Tx checksumming
- Use the GFP firmware taken from Adaptec's Netware driver
LK1.2.2 (Ion Badulescu)
- Backported to 2.2.x
LK1.2.3 (Ion Badulescu)
- Fix the flaky mdio interface
- More compat clean-ups
LK1.2.4 (Ion Badulescu)
- More 2.2.x initialization fixes
LK1.2.5 (Ion Badulescu)
- Several fixes from Manfred Spraul
LK1.2.6 (Ion Badulescu)
- Fixed ifup/ifdown/ifup problem in 2.4.x
LK1.2.7 (Ion Badulescu)
- Removed unused code
- Made more functions static and __init
LK1.2.8 (Ion Badulescu)
- Quell bogus error messages, inform about the Tx threshold
- Removed #ifdef CONFIG_PCI, this driver is PCI only
LK1.2.9 (Ion Badulescu)
- Merged Jeff Garzik's changes from 2.4.4-pre5
- Added 2.2.x compatibility stuff required by the above changes
LK1.2.9a (Ion Badulescu)
- More updates from Jeff Garzik
LK1.3.0 (Ion Badulescu)
- Merged zerocopy support
LK1.3.1 (Ion Badulescu)
- Added ethtool support
- Added GPIO (media change) interrupt support
LK1.3.2 (Ion Badulescu)
- Fixed 2.2.x compatibility issues introduced in 1.3.1
- Fixed ethtool ioctl returning uninitialized memory
LK1.3.3 (Ion Badulescu)
- Initialize the TxMode register properly
- Don't dereference dev->priv after freeing it
LK1.3.4 (Ion Badulescu)
- Fixed initialization timing problems
- Fixed interrupt mask definitions
LK1.3.5 (jgarzik)
- ethtool NWAY_RST, GLINK, [GS]MSGLVL support
LK1.3.6:
- Sparc64 support and fixes (Ion Badulescu)
- Better stats and error handling (Ion Badulescu)
- Use new pci_set_mwi() PCI API function (jgarzik)
LK1.3.7 (Ion Badulescu)
- minimal implementation of tx_timeout()
- correctly shutdown the Rx/Tx engines in netdev_close()
- added calls to netif_carrier_on/off
(patch from Stefan Rompf <srompf@isg.de>)
- VLAN support
LK1.3.8 (Ion Badulescu)
- adjust DMA burst size on sparc64
- 64-bit support
- reworked zerocopy support for 64-bit buffers
- working and usable interrupt mitigation/latency
- reduced Tx interrupt frequency for lower interrupt overhead
LK1.3.9 (Ion Badulescu)
- bugfix for mcast filter
- enable the right kind of Tx interrupts (TxDMADone, not TxDone)
LK1.4.0 (Ion Badulescu)
- NAPI support
LK1.4.1 (Ion Badulescu)
- flush PCI posting buffers after disabling Rx interrupts
- put the chip to a D3 slumber on driver unload
- added config option to enable/disable NAPI
LK1.4.2 (Ion Badulescu)
- finally added firmware (GPL'ed by Adaptec)
- removed compatibility code for 2.2.x
LK1.4.2.1 (Ion Badulescu)
- fixed 32/64 bit issues on i386 + CONFIG_HIGHMEM
- added 32-bit padding to outgoing skb's, removed previous workaround
TODO: - fix forced speed/duplexing code (broken a long time ago, when
somebody converted the driver to use the generic MII code)
- fix VLAN support
*/
#define DRV_NAME "starfire"
#define DRV_VERSION "1.03+LK1.4.2.1"
#define DRV_RELDATE "October 3, 2005"
#define DRV_VERSION "2.0"
#define DRV_RELDATE "June 27, 2006"
#include <linux/module.h>
#include <linux/kernel.h>

View File

@ -16,91 +16,13 @@
Support and updates available at
http://www.scyld.com/network/sundance.html
[link no longer provides useful info -jgarzik]
Version LK1.01a (jgarzik):
- Replace some MII-related magic numbers with constants
Version LK1.02 (D-Link):
- Add new board to PCI ID list
- Fix multicast bug
Version LK1.03 (D-Link):
- New Rx scheme, reduce Rx congestion
- Option to disable flow control
Version LK1.04 (D-Link):
- Tx timeout recovery
- More support for ethtool.
Version LK1.04a:
- Remove unused/constant members from struct pci_id_info
(which then allows removal of 'drv_flags' from private struct)
(jgarzik)
- If no phy is found, fail to load that board (jgarzik)
- Always start phy id scan at id 1 to avoid problems (Donald Becker)
- Autodetect where mii_preable_required is needed,
default to not needed. (Donald Becker)
Version LK1.04b:
- Remove mii_preamble_required module parameter (Donald Becker)
- Add per-interface mii_preamble_required (setting is autodetected)
(Donald Becker)
- Remove unnecessary cast from void pointer (jgarzik)
- Re-align comments in private struct (jgarzik)
Version LK1.04c (jgarzik):
- Support bitmapped message levels (NETIF_MSG_xxx), and the
two ethtool ioctls that get/set them
- Don't hand-code MII ethtool support, use standard API/lib
Version LK1.04d:
- Merge from Donald Becker's sundance.c: (Jason Lunz)
* proper support for variably-sized MTUs
* default to PIO, to fix chip bugs
- Add missing unregister_netdev (Jason Lunz)
- Add CONFIG_SUNDANCE_MMIO config option (jgarzik)
- Better rx buf size calculation (Donald Becker)
Version LK1.05 (D-Link):
- Fix DFE-580TX packet drop issue (for DL10050C)
- Fix reset_tx logic
Version LK1.06 (D-Link):
- Fix crash while unloading driver
Versin LK1.06b (D-Link):
- New tx scheme, adaptive tx_coalesce
Version LK1.07 (D-Link):
- Fix tx bugs in big-endian machines
- Remove unused max_interrupt_work module parameter, the new
NAPI-like rx scheme doesn't need it.
- Remove redundancy get_stats() in intr_handler(), those
I/O access could affect performance in ARM-based system
- Add Linux software VLAN support
Version LK1.08 (Philippe De Muyter phdm@macqel.be):
- Fix bug of custom mac address
(StationAddr register only accept word write)
Version LK1.09 (D-Link):
- Fix the flowctrl bug.
- Set Pause bit in MII ANAR if flow control enabled.
Version LK1.09a (ICPlus):
- Add the delay time in reading the contents of EEPROM
Version LK1.10 (Philippe De Muyter phdm@macqel.be):
- Make 'unblock interface after Tx underrun' work
Version LK1.11 (Pedro Alejandro Lopez-Valencia palopezv at gmail.com):
- Add support for IC Plus Corporation IP100A chipset
*/
#define DRV_NAME "sundance"
#define DRV_VERSION "1.01+LK1.11"
#define DRV_RELDATE "14-Jun-2006"
#define DRV_VERSION "1.1"
#define DRV_RELDATE "27-Jun-2006"
/* The user-configurable values.

View File

@ -10,26 +10,11 @@
410 Severn Ave., Suite 210
Annapolis MD 21403
-----------------------------------------------------------
Linux kernel-specific changes:
LK1.0 (Ion Badulescu)
- Major cleanup
- Use 2.4 PCI API
- Support ethtool
- Rewrite perfect filter/hash code
- Use interrupts for media changes
LK1.1 (Ion Badulescu)
- Disallow negotiation of unsupported full-duplex modes
*/
#define DRV_NAME "xircom_tulip_cb"
#define DRV_VERSION "0.91+LK1.1"
#define DRV_RELDATE "October 11, 2001"
#define CARDBUS 1
#define DRV_VERSION "0.92"
#define DRV_RELDATE "June 27, 2006"
/* A few user-configurable values. */
@ -306,10 +291,10 @@ struct xircom_private {
struct xircom_tx_desc tx_ring[TX_RING_SIZE];
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
struct sk_buff* tx_skbuff[TX_RING_SIZE];
#ifdef CARDBUS
/* The X3201-3 requires 4-byte aligned tx bufs */
struct sk_buff* tx_aligned_skbuff[TX_RING_SIZE];
#endif
/* The addresses of receive-in-place skbuffs. */
struct sk_buff* rx_skbuff[RX_RING_SIZE];
u16 setup_frame[PKT_SETUP_SZ / sizeof(u16)]; /* Pseudo-Tx frame to init address table. */
@ -908,10 +893,8 @@ static void xircom_init_ring(struct net_device *dev)
tp->tx_skbuff[i] = NULL;
tp->tx_ring[i].status = 0;
tp->tx_ring[i].buffer2 = virt_to_bus(&tp->tx_ring[i+1]);
#ifdef CARDBUS
if (tp->chip_id == X3201_3)
tp->tx_aligned_skbuff[i] = dev_alloc_skb(PKT_BUF_SZ);
#endif /* CARDBUS */
}
tp->tx_ring[i-1].buffer2 = virt_to_bus(&tp->tx_ring[0]);
}
@ -931,12 +914,10 @@ xircom_start_xmit(struct sk_buff *skb, struct net_device *dev)
entry = tp->cur_tx % TX_RING_SIZE;
tp->tx_skbuff[entry] = skb;
#ifdef CARDBUS
if (tp->chip_id == X3201_3) {
memcpy(tp->tx_aligned_skbuff[entry]->data,skb->data,skb->len);
tp->tx_ring[entry].buffer1 = virt_to_bus(tp->tx_aligned_skbuff[entry]->data);
} else
#endif
tp->tx_ring[entry].buffer1 = virt_to_bus(skb->data);
if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */

View File

@ -25,117 +25,13 @@
version. He may or may not be interested in bug reports on this
code. You can find his versions at:
http://www.scyld.com/network/via-rhine.html
Linux kernel version history:
LK1.1.0:
- Jeff Garzik: softnet 'n stuff
LK1.1.1:
- Justin Guyett: softnet and locking fixes
- Jeff Garzik: use PCI interface
LK1.1.2:
- Urban Widmark: minor cleanups, merges from Becker 1.03a/1.04 versions
LK1.1.3:
- Urban Widmark: use PCI DMA interface (with thanks to the eepro100.c
code) update "Theory of Operation" with
softnet/locking changes
- Dave Miller: PCI DMA and endian fixups
- Jeff Garzik: MOD_xxx race fixes, updated PCI resource allocation
LK1.1.4:
- Urban Widmark: fix gcc 2.95.2 problem and
remove writel's to fixed address 0x7c
LK1.1.5:
- Urban Widmark: mdio locking, bounce buffer changes
merges from Beckers 1.05 version
added netif_running_on/off support
LK1.1.6:
- Urban Widmark: merges from Beckers 1.08b version (VT6102 + mdio)
set netif_running_on/off on startup, del_timer_sync
LK1.1.7:
- Manfred Spraul: added reset into tx_timeout
LK1.1.9:
- Urban Widmark: merges from Beckers 1.10 version
(media selection + eeprom reload)
- David Vrabel: merges from D-Link "1.11" version
(disable WOL and PME on startup)
LK1.1.10:
- Manfred Spraul: use "singlecopy" for unaligned buffers
don't allocate bounce buffers for !ReqTxAlign cards
LK1.1.11:
- David Woodhouse: Set dev->base_addr before the first time we call
wait_for_reset(). It's a lot happier that way.
Free np->tx_bufs only if we actually allocated it.
LK1.1.12:
- Martin Eriksson: Allow Memory-Mapped IO to be enabled.
LK1.1.13 (jgarzik):
- Add ethtool support
- Replace some MII-related magic numbers with constants
LK1.1.14 (Ivan G.):
- fixes comments for Rhine-III
- removes W_MAX_TIMEOUT (unused)
- adds HasDavicomPhy for Rhine-I (basis: linuxfet driver; my card
is R-I and has Davicom chip, flag is referenced in kernel driver)
- sends chip_id as a parameter to wait_for_reset since np is not
initialized on first call
- changes mmio "else if (chip_id==VT6102)" to "else" so it will work
for Rhine-III's (documentation says same bit is correct)
- transmit frame queue message is off by one - fixed
- adds IntrNormalSummary to "Something Wicked" exclusion list
so normal interrupts will not trigger the message (src: Donald Becker)
(Roger Luethi)
- show confused chip where to continue after Tx error
- location of collision counter is chip specific
- allow selecting backoff algorithm (module parameter)
LK1.1.15 (jgarzik):
- Use new MII lib helper generic_mii_ioctl
LK1.1.16 (Roger Luethi)
- Etherleak fix
- Handle Tx buffer underrun
- Fix bugs in full duplex handling
- New reset code uses "force reset" cmd on Rhine-II
- Various clean ups
LK1.1.17 (Roger Luethi)
- Fix race in via_rhine_start_tx()
- On errors, wait for Tx engine to turn off before scavenging
- Handle Tx descriptor write-back race on Rhine-II
- Force flushing for PCI posted writes
- More reset code changes
LK1.1.18 (Roger Luethi)
- No filtering multicast in promisc mode (Edward Peng)
- Fix for Rhine-I Tx timeouts
LK1.1.19 (Roger Luethi)
- Increase Tx threshold for unspecified errors
LK1.2.0-2.6 (Roger Luethi)
- Massive clean-up
- Rewrite PHY, media handling (remove options, full_duplex, backoff)
- Fix Tx engine race for good
- Craig Brind: Zero padded aligned buffers for short packets.
[link no longer provides useful info -jgarzik]
*/
#define DRV_NAME "via-rhine"
#define DRV_VERSION "1.2.0-2.6"
#define DRV_RELDATE "June-10-2004"
#define DRV_VERSION "1.4.0"
#define DRV_RELDATE "June-27-2006"
/* A few user-configurable values.

View File

@ -19,37 +19,13 @@
Support and updates available at
http://www.scyld.com/network/yellowfin.html
[link no longer provides useful info -jgarzik]
Linux kernel changelog:
-----------------------
LK1.1.1 (jgarzik): Port to 2.4 kernel
LK1.1.2 (jgarzik):
* Merge in becker version 1.05
LK1.1.3 (jgarzik):
* Various cleanups
* Update yellowfin_timer to correctly calculate duplex.
(suggested by Manfred Spraul)
LK1.1.4 (val@nmt.edu):
* Fix three endian-ness bugs
* Support dual function SYM53C885E ethernet chip
LK1.1.5 (val@nmt.edu):
* Fix forced full-duplex bug I introduced
LK1.1.6 (val@nmt.edu):
* Only print warning on truly "oversized" packets
* Fix theoretical bug on gigabit cards - return to 1.1.3 behavior
*/
#define DRV_NAME "yellowfin"
#define DRV_VERSION "1.05+LK1.1.6"
#define DRV_RELDATE "Feb 11, 2002"
#define DRV_VERSION "2.0"
#define DRV_RELDATE "Jun 27, 2006"
#define PFX DRV_NAME ": "