be2net: Add error recovery during load for Lancer

Add error recovery during load for Lancer

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Padmanabh Ratnakar 2011-03-07 03:08:36 +00:00 committed by David S. Miller
parent 19fad86f3b
commit 37eed1cbbd
2 changed files with 68 additions and 0 deletions

View File

@ -44,6 +44,18 @@
#define POST_STAGE_BE_RESET 0x3 /* Host wants to reset chip */
#define POST_STAGE_ARMFW_RDY 0xc000 /* FW is done with POST */
/* Lancer SLIPORT_CONTROL SLIPORT_STATUS registers */
#define SLIPORT_STATUS_OFFSET 0x404
#define SLIPORT_CONTROL_OFFSET 0x408
#define SLIPORT_STATUS_ERR_MASK 0x80000000
#define SLIPORT_STATUS_RN_MASK 0x01000000
#define SLIPORT_STATUS_RDY_MASK 0x00800000
#define SLI_PORT_CONTROL_IP_MASK 0x08000000
/********* Memory BAR register ************/
#define PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET 0xfc
/* Host Interrupt Enable, if set interrupts are enabled although "PCI Interrupt

View File

@ -2901,6 +2901,54 @@ static int be_dev_family_check(struct be_adapter *adapter)
return 0;
}
static int lancer_wait_ready(struct be_adapter *adapter)
{
#define SLIPORT_READY_TIMEOUT 500
u32 sliport_status;
int status = 0, i;
for (i = 0; i < SLIPORT_READY_TIMEOUT; i++) {
sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
if (sliport_status & SLIPORT_STATUS_RDY_MASK)
break;
msleep(20);
}
if (i == SLIPORT_READY_TIMEOUT)
status = -1;
return status;
}
static int lancer_test_and_set_rdy_state(struct be_adapter *adapter)
{
int status;
u32 sliport_status, err, reset_needed;
status = lancer_wait_ready(adapter);
if (!status) {
sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
err = sliport_status & SLIPORT_STATUS_ERR_MASK;
reset_needed = sliport_status & SLIPORT_STATUS_RN_MASK;
if (err && reset_needed) {
iowrite32(SLI_PORT_CONTROL_IP_MASK,
adapter->db + SLIPORT_CONTROL_OFFSET);
/* check adapter has corrected the error */
status = lancer_wait_ready(adapter);
sliport_status = ioread32(adapter->db +
SLIPORT_STATUS_OFFSET);
sliport_status &= (SLIPORT_STATUS_ERR_MASK |
SLIPORT_STATUS_RN_MASK);
if (status || sliport_status)
status = -1;
} else if (err || reset_needed) {
status = -1;
}
}
return status;
}
static int __devinit be_probe(struct pci_dev *pdev,
const struct pci_device_id *pdev_id)
{
@ -2950,6 +2998,14 @@ static int __devinit be_probe(struct pci_dev *pdev,
if (status)
goto free_netdev;
if (lancer_chip(adapter)) {
status = lancer_test_and_set_rdy_state(adapter);
if (status) {
dev_err(&pdev->dev, "Adapter in non recoverable error\n");
goto free_netdev;
}
}
/* sync up with fw's ready state */
if (be_physfn(adapter)) {
status = be_cmd_POST(adapter);