smc91x: introduce platform data flags V2

This patch introduces struct smc91x_platdata and modifies the driver so
bus width is checked during run time using SMC_nBIT() instead of
SMC_CAN_USE_nBIT.

V2 keeps static configuration lean using SMC_DYNAMIC_BUS_CONFIG.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Magnus Damm 2008-02-22 19:55:15 +09:00 committed by Jeff Garzik
parent cfdfa86536
commit 3e94794355
3 changed files with 77 additions and 27 deletions

View File

@ -1997,6 +1997,8 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
static int smc_enable_device(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct smc_local *lp = netdev_priv(ndev);
unsigned long flags;
unsigned char ecor, ecsr;
void __iomem *addr;
@ -2039,7 +2041,7 @@ static int smc_enable_device(struct platform_device *pdev)
* Set the appropriate byte/word mode.
*/
ecsr = readb(addr + (ECSR << SMC_IO_SHIFT)) & ~ECSR_IOIS8;
if (!SMC_CAN_USE_16BIT)
if (!SMC_16BIT(lp))
ecsr |= ECSR_IOIS8;
writeb(ecsr, addr + (ECSR << SMC_IO_SHIFT));
local_irq_restore(flags);
@ -2124,10 +2126,11 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device *
*/
static int smc_drv_probe(struct platform_device *pdev)
{
struct smc91x_platdata *pd = pdev->dev.platform_data;
struct smc_local *lp;
struct net_device *ndev;
struct resource *res, *ires;
unsigned int __iomem *addr;
unsigned long irq_flags = SMC_IRQ_FLAGS;
int ret;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
@ -2152,6 +2155,27 @@ static int smc_drv_probe(struct platform_device *pdev)
}
SET_NETDEV_DEV(ndev, &pdev->dev);
/* get configuration from platform data, only allow use of
* bus width if both SMC_CAN_USE_xxx and SMC91X_USE_xxx are set.
*/
lp = netdev_priv(ndev);
lp->cfg.irq_flags = SMC_IRQ_FLAGS;
#ifdef SMC_DYNAMIC_BUS_CONFIG
if (pd)
memcpy(&lp->cfg, pd, sizeof(lp->cfg));
else {
lp->cfg.flags = SMC91X_USE_8BIT;
lp->cfg.flags |= SMC91X_USE_16BIT;
lp->cfg.flags |= SMC91X_USE_32BIT;
}
lp->cfg.flags &= ~(SMC_CAN_USE_8BIT ? 0 : SMC91X_USE_8BIT);
lp->cfg.flags &= ~(SMC_CAN_USE_16BIT ? 0 : SMC91X_USE_16BIT);
lp->cfg.flags &= ~(SMC_CAN_USE_32BIT ? 0 : SMC91X_USE_32BIT);
#endif
ndev->dma = (unsigned char)-1;
ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
@ -2162,7 +2186,7 @@ static int smc_drv_probe(struct platform_device *pdev)
ndev->irq = ires->start;
if (SMC_IRQ_FLAGS == -1)
irq_flags = ires->flags & IRQF_TRIGGER_MASK;
lp->cfg.irq_flags = ires->flags & IRQF_TRIGGER_MASK;
ret = smc_request_attrib(pdev);
if (ret)
@ -2170,6 +2194,7 @@ static int smc_drv_probe(struct platform_device *pdev)
#if defined(CONFIG_SA1100_ASSABET)
NCR_0 |= NCR_ENET_OSC_EN;
#endif
platform_set_drvdata(pdev, ndev);
ret = smc_enable_device(pdev);
if (ret)
goto out_release_attrib;
@ -2188,8 +2213,7 @@ static int smc_drv_probe(struct platform_device *pdev)
}
#endif
platform_set_drvdata(pdev, ndev);
ret = smc_probe(ndev, addr, irq_flags);
ret = smc_probe(ndev, addr, lp->cfg.irq_flags);
if (ret != 0)
goto out_iounmap;

View File

@ -34,6 +34,7 @@
#ifndef _SMC91X_H_
#define _SMC91X_H_
#include <linux/smc91x.h>
/*
* Define your architecture specific bus configuration parameters here.
@ -481,6 +482,7 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r,
#define RPC_LSA_DEFAULT RPC_LED_100_10
#define RPC_LSB_DEFAULT RPC_LED_TX_RX
#define SMC_DYNAMIC_BUS_CONFIG
#endif
@ -526,8 +528,19 @@ struct smc_local {
#endif
void __iomem *base;
void __iomem *datacs;
struct smc91x_platdata cfg;
};
#ifdef SMC_DYNAMIC_BUS_CONFIG
#define SMC_8BIT(p) (((p)->cfg.flags & SMC91X_USE_8BIT) && SMC_CAN_USE_8BIT)
#define SMC_16BIT(p) (((p)->cfg.flags & SMC91X_USE_16BIT) && SMC_CAN_USE_16BIT)
#define SMC_32BIT(p) (((p)->cfg.flags & SMC91X_USE_32BIT) && SMC_CAN_USE_32BIT)
#else
#define SMC_8BIT(p) SMC_CAN_USE_8BIT
#define SMC_16BIT(p) SMC_CAN_USE_16BIT
#define SMC_32BIT(p) SMC_CAN_USE_32BIT
#endif
#ifdef SMC_USE_PXA_DMA
/*
@ -1108,41 +1121,41 @@ static const char * chip_ids[ 16 ] = {
*
* Enforce it on any 32-bit capable setup for now.
*/
#define SMC_MUST_ALIGN_WRITE SMC_CAN_USE_32BIT
#define SMC_MUST_ALIGN_WRITE(lp) SMC_32BIT(lp)
#define SMC_GET_PN(lp) \
(SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, PN_REG(lp))) \
(SMC_8BIT(lp) ? (SMC_inb(ioaddr, PN_REG(lp))) \
: (SMC_inw(ioaddr, PN_REG(lp)) & 0xFF))
#define SMC_SET_PN(lp, x) \
do { \
if (SMC_MUST_ALIGN_WRITE) \
if (SMC_MUST_ALIGN_WRITE(lp)) \
SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 0, 2)); \
else if (SMC_CAN_USE_8BIT) \
else if (SMC_8BIT(lp)) \
SMC_outb(x, ioaddr, PN_REG(lp)); \
else \
SMC_outw(x, ioaddr, PN_REG(lp)); \
} while (0)
#define SMC_GET_AR(lp) \
(SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, AR_REG(lp))) \
(SMC_8BIT(lp) ? (SMC_inb(ioaddr, AR_REG(lp))) \
: (SMC_inw(ioaddr, PN_REG(lp)) >> 8))
#define SMC_GET_TXFIFO(lp) \
(SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, TXFIFO_REG(lp))) \
(SMC_8BIT(lp) ? (SMC_inb(ioaddr, TXFIFO_REG(lp))) \
: (SMC_inw(ioaddr, TXFIFO_REG(lp)) & 0xFF))
#define SMC_GET_RXFIFO(lp) \
(SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, RXFIFO_REG(lp))) \
(SMC_8BIT(lp) ? (SMC_inb(ioaddr, RXFIFO_REG(lp))) \
: (SMC_inw(ioaddr, TXFIFO_REG(lp)) >> 8))
#define SMC_GET_INT(lp) \
(SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, INT_REG(lp))) \
(SMC_8BIT(lp) ? (SMC_inb(ioaddr, INT_REG(lp))) \
: (SMC_inw(ioaddr, INT_REG(lp)) & 0xFF))
#define SMC_ACK_INT(lp, x) \
do { \
if (SMC_CAN_USE_8BIT) \
if (SMC_8BIT(lp)) \
SMC_outb(x, ioaddr, INT_REG(lp)); \
else { \
unsigned long __flags; \
@ -1155,12 +1168,12 @@ static const char * chip_ids[ 16 ] = {
} while (0)
#define SMC_GET_INT_MASK(lp) \
(SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, IM_REG(lp))) \
(SMC_8BIT(lp) ? (SMC_inb(ioaddr, IM_REG(lp))) \
: (SMC_inw(ioaddr, INT_REG(lp)) >> 8))
#define SMC_SET_INT_MASK(lp, x) \
do { \
if (SMC_CAN_USE_8BIT) \
if (SMC_8BIT(lp)) \
SMC_outb(x, ioaddr, IM_REG(lp)); \
else \
SMC_outw((x) << 8, ioaddr, INT_REG(lp)); \
@ -1170,7 +1183,7 @@ static const char * chip_ids[ 16 ] = {
#define SMC_SELECT_BANK(lp, x) \
do { \
if (SMC_MUST_ALIGN_WRITE) \
if (SMC_MUST_ALIGN_WRITE(lp)) \
SMC_outl((x)<<16, ioaddr, 12<<SMC_IO_SHIFT); \
else \
SMC_outw(x, ioaddr, BANK_SELECT); \
@ -1208,7 +1221,7 @@ static const char * chip_ids[ 16 ] = {
#define SMC_SET_PTR(lp, x) \
do { \
if (SMC_MUST_ALIGN_WRITE) \
if (SMC_MUST_ALIGN_WRITE(lp)) \
SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 4, 2)); \
else \
SMC_outw(x, ioaddr, PTR_REG(lp)); \
@ -1226,7 +1239,7 @@ static const char * chip_ids[ 16 ] = {
#define SMC_SET_RPC(lp, x) \
do { \
if (SMC_MUST_ALIGN_WRITE) \
if (SMC_MUST_ALIGN_WRITE(lp)) \
SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 8, 0)); \
else \
SMC_outw(x, ioaddr, RPC_REG(lp)); \
@ -1267,7 +1280,7 @@ static const char * chip_ids[ 16 ] = {
#define SMC_PUT_PKT_HDR(lp, status, length) \
do { \
if (SMC_CAN_USE_32BIT) \
if (SMC_32BIT(lp)) \
SMC_outl((status) | (length)<<16, ioaddr, \
DATA_REG(lp)); \
else { \
@ -1278,7 +1291,7 @@ static const char * chip_ids[ 16 ] = {
#define SMC_GET_PKT_HDR(lp, status, length) \
do { \
if (SMC_CAN_USE_32BIT) { \
if (SMC_32BIT(lp)) { \
unsigned int __val = SMC_inl(ioaddr, DATA_REG(lp)); \
(status) = __val & 0xffff; \
(length) = __val >> 16; \
@ -1290,7 +1303,7 @@ static const char * chip_ids[ 16 ] = {
#define SMC_PUSH_DATA(lp, p, l) \
do { \
if (SMC_CAN_USE_32BIT) { \
if (SMC_32BIT(lp)) { \
void *__ptr = (p); \
int __len = (l); \
void __iomem *__ioaddr = ioaddr; \
@ -1308,15 +1321,15 @@ static const char * chip_ids[ 16 ] = {
SMC_outw(*((u16 *)__ptr), ioaddr, \
DATA_REG(lp)); \
} \
} else if (SMC_CAN_USE_16BIT) \
} else if (SMC_16BIT(lp)) \
SMC_outsw(ioaddr, DATA_REG(lp), p, (l) >> 1); \
else if (SMC_CAN_USE_8BIT) \
else if (SMC_8BIT(lp)) \
SMC_outsb(ioaddr, DATA_REG(lp), p, l); \
} while (0)
#define SMC_PULL_DATA(lp, p, l) \
do { \
if (SMC_CAN_USE_32BIT) { \
if (SMC_32BIT(lp)) { \
void *__ptr = (p); \
int __len = (l); \
void __iomem *__ioaddr = ioaddr; \
@ -1343,9 +1356,9 @@ static const char * chip_ids[ 16 ] = {
__ioaddr = lp->datacs; \
__len += 2; \
SMC_insl(__ioaddr, DATA_REG(lp), __ptr, __len>>2); \
} else if (SMC_CAN_USE_16BIT) \
} else if (SMC_16BIT(lp)) \
SMC_insw(ioaddr, DATA_REG(lp), p, (l) >> 1); \
else if (SMC_CAN_USE_8BIT) \
else if (SMC_8BIT(lp)) \
SMC_insb(ioaddr, DATA_REG(lp), p, l); \
} while (0)

13
include/linux/smc91x.h Normal file
View File

@ -0,0 +1,13 @@
#ifndef __SMC91X_H__
#define __SMC91X_H__
#define SMC91X_USE_8BIT (1 << 0)
#define SMC91X_USE_16BIT (1 << 1)
#define SMC91X_USE_32BIT (1 << 2)
struct smc91x_platdata {
unsigned long flags;
unsigned long irq_flags; /* IRQF_... */
};
#endif /* __SMC91X_H__ */