powerpc/85xx: Adding DTS for the STx GP3-SSA MPC8555 board

This version uses "fsl,mpc8555..." instead of "fsl,85..." notation.

There is also an 8541 version of this board so DTS for this board
is specific to the 8555 processor.

Another patch is coming to fix-up other DTS that use old notation.

Signed-off-by: Bradley Hughes <bhughes@silicontkx.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Bradley Hughes 2010-07-21 12:04:00 +00:00 committed by Kumar Gala
parent 8a4ab218ef
commit 51974d3162

View File

@ -0,0 +1,380 @@
/*
* MPC8555-based STx GP3 Device Tree Source
*
* Copyright 2006, 2008 Freescale Semiconductor Inc.
*
* Copyright 2010 Silicon Turnkey Express LLC.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "stx,gp3";
compatible = "stx,gp3-8560", "stx,gp3";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8555@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
next-level-cache = <&L2>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
soc8555@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xe0000000 0x100000>;
bus-frequency = <0>;
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <8>;
};
ecm@1000 {
compatible = "fsl,mpc8555-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2>;
interrupt-parent = <&mpic>;
};
memory-controller@2000 {
compatible = "fsl,mpc8555-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8555-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2, 256K
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8555-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8555-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8555-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8555-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <23 2>;
};
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@4 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x4>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
crypto@30000 {
compatible = "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <45 2>;
interrupt-parent = <&mpic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x7e>;
fsl,descriptor-types-mask = <0x01010ebf>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
cpm@919c0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
reg = <0x919c0 0x30>;
ranges;
muram@80000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x80000 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0x0 0x2000 0x9000 0x1000>;
};
};
brg@919f0 {
compatible = "fsl,mpc8555-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
reg = <0x919f0 0x10 0x915f0 0x10>;
};
cpmpic: pic@90c00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupts = <46 2>;
interrupt-parent = <&mpic>;
reg = <0x90c00 0x80>;
compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
};
};
};
pci0: pci@e0008000 {
interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x10 */
0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x11 */
0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x12 (Slot 1) */
0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x13 (Slot 2) */
0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
/* IDSEL 0x14 (Slot 3) */
0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x15 (Slot 4) */
0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
interrupts = <24 2>;
bus-range = <0 0>;
ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
i8259@19000 {
interrupt-controller;
device_type = "interrupt-controller";
reg = <0x19000 0x0 0x0 0x0 0x1>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <1>;
interrupt-parent = <&pci0>;
};
};
pci1: pci@e0009000 {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
interrupt-parent = <&mpic>;
interrupts = <25 2>;
bus-range = <0 0>;
ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe0009000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
};