[PATCH] dvb: usb/pci: correct syntax of driver name fields

Change the name-field of the pci_driver and usb_driver structs to the name of
the module after compilation.  It seems that this field is used in some places
where special characters are not allowed.  Thanks to Alan Halverson for
finding this problem.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Patrick Boettcher 2005-07-07 17:58:30 -07:00 committed by Linus Torvalds
parent d8667cbbe4
commit 63b5c1c47f
10 changed files with 12 additions and 12 deletions

View File

@ -409,7 +409,7 @@ static struct pci_device_id flexcop_pci_tbl[] = {
MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl);
static struct pci_driver flexcop_pci_driver = {
.name = "Technisat/B2C2 FlexCop II/IIb PCI",
.name = "b2c2_flexcop_pci",
.id_table = flexcop_pci_tbl,
.probe = flexcop_pci_probe,
.remove = flexcop_pci_remove,

View File

@ -545,7 +545,7 @@ static struct usb_device_id flexcop_usb_table [] = {
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver flexcop_usb_driver = {
.owner = THIS_MODULE,
.name = "Technisat/B2C2 FlexCop II/IIb/III USB",
.name = "b2c2_flexcop_usb",
.probe = flexcop_usb_probe,
.disconnect = flexcop_usb_disconnect,
.id_table = flexcop_usb_table,

View File

@ -149,7 +149,7 @@ static struct dvb_usb_properties a800_properties = {
static struct usb_driver a800_driver = {
.owner = THIS_MODULE,
.name = "AVerMedia AverTV DVB-T USB 2.0 (A800)",
.name = "dvb_usb_a800",
.probe = a800_probe,
.disconnect = dvb_usb_device_exit,
.id_table = a800_table,

View File

@ -262,7 +262,7 @@ static struct dvb_usb_properties cxusb_properties = {
static struct usb_driver cxusb_driver = {
.owner = THIS_MODULE,
.name = "cxusb",
.name = "dvb_usb_cxusb",
.probe = cxusb_probe,
.disconnect = dvb_usb_device_exit,
.id_table = cxusb_table,

View File

@ -317,7 +317,7 @@ static struct dvb_usb_properties dibusb2_0b_properties = {
static struct usb_driver dibusb_driver = {
.owner = THIS_MODULE,
.name = "DiBcom based USB DVB-T devices (DiB3000M-B based)",
.name = "dvb_usb_dibusb_mb",
.probe = dibusb_probe,
.disconnect = dvb_usb_device_exit,
.id_table = dibusb_dib3000mb_table,

View File

@ -83,7 +83,7 @@ static struct dvb_usb_properties dibusb_mc_properties = {
static struct usb_driver dibusb_mc_driver = {
.owner = THIS_MODULE,
.name = "DiBcom based USB2.0 DVB-T (DiB3000M-C/P based) devices",
.name = "dvb_usb_dibusb_mc",
.probe = dibusb_mc_probe,
.disconnect = dvb_usb_device_exit,
.id_table = dibusb_dib3000mc_table,

View File

@ -228,7 +228,7 @@ static struct dvb_usb_properties digitv_properties = {
static struct usb_driver digitv_driver = {
.owner = THIS_MODULE,
.name = "Nebula Electronics uDigiTV DVB-T USB2.0 device",
.name = "dvb_usb_digitv",
.probe = digitv_probe,
.disconnect = dvb_usb_device_exit,
.id_table = digitv_table,

View File

@ -203,7 +203,7 @@ static struct dvb_usb_properties nova_t_properties = {
static struct usb_driver nova_t_driver = {
.owner = THIS_MODULE,
.name = "Hauppauge WinTV-NOVA-T usb2",
.name = "dvb_usb_nova_t_usb2",
.probe = nova_t_probe,
.disconnect = dvb_usb_device_exit,
.id_table = nova_t_table,

View File

@ -129,7 +129,7 @@ static struct dvb_usb_properties umt_properties = {
static struct usb_driver umt_driver = {
.owner = THIS_MODULE,
.name = "HanfTek UMT-010 USB2.0 DVB-T devices",
.name = "dvb_usb_umt_010",
.probe = umt_probe,
.disconnect = dvb_usb_device_exit,
.id_table = umt_table,

View File

@ -44,7 +44,7 @@ int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in,
if (usb_control_msg(d->udev,
usb_sndctrlpipe(d->udev,0),
TH_COMMAND_OUT, USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0,
outbuf, 20, 2*HZ) != 20) {
outbuf, 20, 2000) != 20) {
err("USB control message 'out' went wrong.");
ret = -EIO;
goto unlock;
@ -55,7 +55,7 @@ int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in,
if (usb_control_msg(d->udev,
usb_rcvctrlpipe(d->udev,0),
TH_COMMAND_IN, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
inbuf, 12, 2*HZ) != 12) {
inbuf, 12, 2000) != 12) {
err("USB control message 'in' went wrong.");
ret = -EIO;
goto unlock;
@ -255,7 +255,7 @@ static struct dvb_usb_properties vp7045_properties = {
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver vp7045_usb_driver = {
.owner = THIS_MODULE,
.name = "dvb-usb-vp7045",
.name = "dvb_usb_vp7045",
.probe = vp7045_usb_probe,
.disconnect = dvb_usb_device_exit,
.id_table = vp7045_usb_table,