Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

This commit is contained in:
David Woodhouse 2005-05-17 12:04:46 +01:00
commit 69887ac1dc
34 changed files with 906 additions and 501 deletions

View File

@ -478,7 +478,7 @@ static int s3c2440_clk_add(struct sys_device *sysdev)
{
unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate) * 2;
s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate);
printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n",
print_mhz(s3c2440_clk_upll.rate));

View File

@ -192,9 +192,11 @@ void __init s3c2440_map_io(struct map_desc *mach_desc, int size)
iotable_init(s3c2440_iodesc, ARRAY_SIZE(s3c2440_iodesc));
iotable_init(mach_desc, size);
/* rename any peripherals used differing from the s3c2410 */
s3c_device_i2c.name = "s3c2440-i2c";
s3c_device_i2c.name = "s3c2440-i2c";
s3c_device_nand.name = "s3c2440-nand";
/* change irq for watchdog */
@ -225,7 +227,7 @@ void __init s3c2440_init_clocks(int xtal)
break;
case S3C2440_CLKDIVN_HDIVN_2:
hdiv = 1;
hdiv = 2;
break;
case S3C2440_CLKDIVN_HDIVN_4_8:

View File

@ -412,21 +412,20 @@ config CPU_BPREDICT_DISABLE
config TLS_REG_EMUL
bool
default y if (SMP || CPU_32v6) && (CPU_32v5 || CPU_32v4 || CPU_32v3)
default y if SMP && (CPU_32v5 || CPU_32v4 || CPU_32v3)
help
We might be running on an ARMv6+ processor which should have the TLS
register but for some reason we can't use it, or maybe an SMP system
using a pre-ARMv6 processor (there are apparently a few prototypes
like that in existence) and therefore access to that register must
be emulated.
An SMP system using a pre-ARMv6 processor (there are apparently
a few prototypes like that in existence) and therefore access to
that required register must be emulated.
config HAS_TLS_REG
bool
depends on CPU_32v6
default y if !TLS_REG_EMUL
depends on !TLS_REG_EMUL
default y if SMP || CPU_32v7
help
This selects support for the CP15 thread register.
It is defined to be available on ARMv6 or later. If a particular
ARMv6 or later CPU doesn't support it then it must omc;ide "select
TLS_REG_EMUL" along with its other caracteristics.
It is defined to be available on some ARMv6 processors (including
all SMP capable ARMv6's) or later processors. User space may
assume directly accessing that register and always obtain the
expected value only on ARMv7 and above.

View File

@ -1,80 +0,0 @@
/*
* linux/arch/arm/lib/copy_page-armv4mc.S
*
* Copyright (C) 1995-2001 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* ASM optimised string functions
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/constants.h>
.text
.align 5
/*
* ARMv4 mini-dcache optimised copy_user_page
*
* We flush the destination cache lines just before we write the data into the
* corresponding address. Since the Dcache is read-allocate, this removes the
* Dcache aliasing issue. The writes will be forwarded to the write buffer,
* and merged as appropriate.
*
* Note: We rely on all ARMv4 processors implementing the "invalidate D line"
* instruction. If your processor does not supply this, you have to write your
* own copy_user_page that does the right thing.
*/
ENTRY(v4_mc_copy_user_page)
stmfd sp!, {r4, lr} @ 2
mov r4, r0
mov r0, r1
bl map_page_minicache
mov r1, #PAGE_SZ/64 @ 1
ldmia r0!, {r2, r3, ip, lr} @ 4
1: mcr p15, 0, r4, c7, c6, 1 @ 1 invalidate D line
stmia r4!, {r2, r3, ip, lr} @ 4
ldmia r0!, {r2, r3, ip, lr} @ 4+1
stmia r4!, {r2, r3, ip, lr} @ 4
ldmia r0!, {r2, r3, ip, lr} @ 4
mcr p15, 0, r4, c7, c6, 1 @ 1 invalidate D line
stmia r4!, {r2, r3, ip, lr} @ 4
ldmia r0!, {r2, r3, ip, lr} @ 4
subs r1, r1, #1 @ 1
stmia r4!, {r2, r3, ip, lr} @ 4
ldmneia r0!, {r2, r3, ip, lr} @ 4
bne 1b @ 1
ldmfd sp!, {r4, pc} @ 3
.align 5
/*
* ARMv4 optimised clear_user_page
*
* Same story as above.
*/
ENTRY(v4_mc_clear_user_page)
str lr, [sp, #-4]!
mov r1, #PAGE_SZ/64 @ 1
mov r2, #0 @ 1
mov r3, #0 @ 1
mov ip, #0 @ 1
mov lr, #0 @ 1
1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
stmia r0!, {r2, r3, ip, lr} @ 4
stmia r0!, {r2, r3, ip, lr} @ 4
mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
stmia r0!, {r2, r3, ip, lr} @ 4
stmia r0!, {r2, r3, ip, lr} @ 4
subs r1, r1, #1 @ 1
bne 1b @ 1
ldr pc, [sp], #4
__INITDATA
.type v4_mc_user_fns, #object
ENTRY(v4_mc_user_fns)
.long v4_mc_clear_user_page
.long v4_mc_copy_user_page
.size v4_mc_user_fns, . - v4_mc_user_fns

111
arch/arm/mm/copypage-v4mc.c Normal file
View File

@ -0,0 +1,111 @@
/*
* linux/arch/arm/lib/copypage-armv4mc.S
*
* Copyright (C) 1995-2005 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This handles the mini data cache, as found on SA11x0 and XScale
* processors. When we copy a user page page, we map it in such a way
* that accesses to this page will not touch the main data cache, but
* will be cached in the mini data cache. This prevents us thrashing
* the main data cache on page faults.
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
/*
* 0xffff8000 to 0xffffffff is reserved for any ARM architecture
* specific hacks for copying pages efficiently.
*/
#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
L_PTE_CACHEABLE)
#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
static DEFINE_SPINLOCK(minicache_lock);
/*
* ARMv4 mini-dcache optimised copy_user_page
*
* We flush the destination cache lines just before we write the data into the
* corresponding address. Since the Dcache is read-allocate, this removes the
* Dcache aliasing issue. The writes will be forwarded to the write buffer,
* and merged as appropriate.
*
* Note: We rely on all ARMv4 processors implementing the "invalidate D line"
* instruction. If your processor does not supply this, you have to write your
* own copy_user_page that does the right thing.
*/
static void __attribute__((naked))
mc_copy_user_page(void *from, void *to)
{
asm volatile(
"stmfd sp!, {r4, lr} @ 2\n\
mov r4, %2 @ 1\n\
ldmia %0!, {r2, r3, ip, lr} @ 4\n\
1: mcr p15, 0, %1, c7, c6, 1 @ 1 invalidate D line\n\
stmia %1!, {r2, r3, ip, lr} @ 4\n\
ldmia %0!, {r2, r3, ip, lr} @ 4+1\n\
stmia %1!, {r2, r3, ip, lr} @ 4\n\
ldmia %0!, {r2, r3, ip, lr} @ 4\n\
mcr p15, 0, %1, c7, c6, 1 @ 1 invalidate D line\n\
stmia %1!, {r2, r3, ip, lr} @ 4\n\
ldmia %0!, {r2, r3, ip, lr} @ 4\n\
subs r4, r4, #1 @ 1\n\
stmia %1!, {r2, r3, ip, lr} @ 4\n\
ldmneia %0!, {r2, r3, ip, lr} @ 4\n\
bne 1b @ 1\n\
ldmfd sp!, {r4, pc} @ 3"
:
: "r" (from), "r" (to), "I" (PAGE_SIZE / 64));
}
void v4_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
{
spin_lock(&minicache_lock);
set_pte(TOP_PTE(0xffff8000), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot));
flush_tlb_kernel_page(0xffff8000);
mc_copy_user_page((void *)0xffff8000, kto);
spin_unlock(&minicache_lock);
}
/*
* ARMv4 optimised clear_user_page
*/
void __attribute__((naked))
v4_mc_clear_user_page(void *kaddr, unsigned long vaddr)
{
asm volatile(
"str lr, [sp, #-4]!\n\
mov r1, %0 @ 1\n\
mov r2, #0 @ 1\n\
mov r3, #0 @ 1\n\
mov ip, #0 @ 1\n\
mov lr, #0 @ 1\n\
1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\
stmia r0!, {r2, r3, ip, lr} @ 4\n\
stmia r0!, {r2, r3, ip, lr} @ 4\n\
mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\
stmia r0!, {r2, r3, ip, lr} @ 4\n\
stmia r0!, {r2, r3, ip, lr} @ 4\n\
subs r1, r1, #1 @ 1\n\
bne 1b @ 1\n\
ldr pc, [sp], #4"
:
: "I" (PAGE_SIZE / 64));
}
struct cpu_user_fns v4_mc_user_fns __initdata = {
.cpu_clear_user_page = v4_mc_clear_user_page,
.cpu_copy_user_page = v4_mc_copy_user_page,
};

View File

@ -26,8 +26,8 @@
#define to_address (0xffffc000)
#define to_pgprot PAGE_KERNEL
static pte_t *from_pte;
static pte_t *to_pte;
#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
static DEFINE_SPINLOCK(v6_lock);
#define DCACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
@ -74,8 +74,8 @@ void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vadd
*/
spin_lock(&v6_lock);
set_pte(from_pte + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, from_pgprot));
set_pte(to_pte + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, to_pgprot));
set_pte(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, from_pgprot));
set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, to_pgprot));
from = from_address + (offset << PAGE_SHIFT);
to = to_address + (offset << PAGE_SHIFT);
@ -114,7 +114,7 @@ void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
*/
spin_lock(&v6_lock);
set_pte(to_pte + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, to_pgprot));
set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, to_pgprot));
flush_tlb_kernel_page(to);
clear_page((void *)to);
@ -129,21 +129,6 @@ struct cpu_user_fns v6_user_fns __initdata = {
static int __init v6_userpage_init(void)
{
if (cache_is_vipt_aliasing()) {
pgd_t *pgd;
pmd_t *pmd;
pgd = pgd_offset_k(from_address);
pmd = pmd_alloc(&init_mm, pgd, from_address);
if (!pmd)
BUG();
from_pte = pte_alloc_kernel(&init_mm, pmd, from_address);
if (!from_pte)
BUG();
to_pte = pte_alloc_kernel(&init_mm, pmd, to_address);
if (!to_pte)
BUG();
cpu_user.cpu_clear_user_page = v6_clear_user_page_aliasing;
cpu_user.cpu_copy_user_page = v6_copy_user_page_aliasing;
}
@ -151,5 +136,4 @@ static int __init v6_userpage_init(void)
return 0;
}
__initcall(v6_userpage_init);
core_initcall(v6_userpage_init);

View File

@ -13,6 +13,29 @@
#include <asm/cacheflush.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
#ifdef CONFIG_CPU_CACHE_VIPT
#define ALIAS_FLUSH_START 0xffff4000
#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
{
unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL));
flush_tlb_kernel_page(to);
asm( "mcrr p15, 0, %1, %0, c14\n"
" mcrr p15, 0, %1, %0, c5\n"
:
: "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES)
: "cc");
}
#else
#define flush_pfn_alias(pfn,vaddr) do { } while (0)
#endif
static void __flush_dcache_page(struct address_space *mapping, struct page *page)
{
@ -36,6 +59,18 @@ static void __flush_dcache_page(struct address_space *mapping, struct page *page
if (!mapping)
return;
/*
* This is a page cache page. If we have a VIPT cache, we
* only need to do one flush - which would be at the relevant
* userspace colour, which is congruent with page->index.
*/
if (cache_is_vipt()) {
if (cache_is_vipt_aliasing())
flush_pfn_alias(page_to_pfn(page),
page->index << PAGE_CACHE_SHIFT);
return;
}
/*
* There are possible user space mappings of this page:
* - VIVT cache: we need to also write back and invalidate all user
@ -57,8 +92,6 @@ static void __flush_dcache_page(struct address_space *mapping, struct page *page
continue;
offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
flush_cache_page(mpnt, mpnt->vm_start + offset, page_to_pfn(page));
if (cache_is_vipt())
break;
}
flush_dcache_mmap_unlock(mapping);
}

View File

@ -37,6 +37,8 @@ pgprot_t pgprot_kernel;
EXPORT_SYMBOL(pgprot_kernel);
pmd_t *top_pmd;
struct cachepolicy {
const char policy[16];
unsigned int cr_mask;
@ -142,6 +144,16 @@ __setup("noalign", noalign_setup);
#define FIRST_KERNEL_PGD_NR (FIRST_USER_PGD_NR + USER_PTRS_PER_PGD)
static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
{
return pmd_offset(pgd, virt);
}
static inline pmd_t *pmd_off_k(unsigned long virt)
{
return pmd_off(pgd_offset_k(virt), virt);
}
/*
* need to get a 16k page for level 1
*/
@ -220,7 +232,7 @@ void free_pgd_slow(pgd_t *pgd)
return;
/* pgd is always present and good */
pmd = (pmd_t *)pgd;
pmd = pmd_off(pgd, 0);
if (pmd_none(*pmd))
goto free;
if (pmd_bad(*pmd)) {
@ -246,9 +258,8 @@ void free_pgd_slow(pgd_t *pgd)
static inline void
alloc_init_section(unsigned long virt, unsigned long phys, int prot)
{
pmd_t *pmdp;
pmd_t *pmdp = pmd_off_k(virt);
pmdp = pmd_offset(pgd_offset_k(virt), virt);
if (virt & (1 << 20))
pmdp++;
@ -283,11 +294,9 @@ alloc_init_supersection(unsigned long virt, unsigned long phys, int prot)
static inline void
alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pgprot_t prot)
{
pmd_t *pmdp;
pmd_t *pmdp = pmd_off_k(virt);
pte_t *ptep;
pmdp = pmd_offset(pgd_offset_k(virt), virt);
if (pmd_none(*pmdp)) {
unsigned long pmdval;
ptep = alloc_bootmem_low_pages(2 * PTRS_PER_PTE *
@ -310,7 +319,7 @@ alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pg
*/
static inline void clear_mapping(unsigned long virt)
{
pmd_clear(pmd_offset(pgd_offset_k(virt), virt));
pmd_clear(pmd_off_k(virt));
}
struct mem_types {
@ -578,7 +587,7 @@ void setup_mm_for_reboot(char mode)
PMD_TYPE_SECT;
if (cpu_arch <= CPU_ARCH_ARMv5)
pmdval |= PMD_BIT4;
pmd = pmd_offset(pgd + i, i << PGDIR_SHIFT);
pmd = pmd_off(pgd, i << PGDIR_SHIFT);
pmd[0] = __pmd(pmdval);
pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));
flush_pmd_entry(pmd);
@ -675,6 +684,8 @@ void __init memtable_init(struct meminfo *mi)
flush_cache_all();
flush_tlb_all();
top_pmd = pmd_off_k(0xffff0000);
}
/*

View File

@ -237,3 +237,5 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
}
return ret;
}
EXPORT_SYMBOL_GPL(blkdev_ioctl);

View File

@ -2406,7 +2406,7 @@ static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, u
case CDROM_LAST_WRITTEN:
case CDROM_SEND_PACKET:
case SCSI_IOCTL_SEND_COMMAND:
return ioctl_by_bdev(pd->bdev, cmd, arg);
return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
case CDROMEJECT:
/*
@ -2414,7 +2414,7 @@ static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, u
* have to unlock it or else the eject command fails.
*/
pkt_lock_door(pd, 0);
return ioctl_by_bdev(pd->bdev, cmd, arg);
return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
default:
printk("pktcdvd: Unknown ioctl for %s (%x)\n", pd->name, cmd);

View File

@ -122,7 +122,7 @@ raw_ioctl(struct inode *inode, struct file *filp,
{
struct block_device *bdev = filp->private_data;
return ioctl_by_bdev(bdev, command, arg);
return blkdev_ioctl(bdev->bd_inode, filp, command, arg);
}
static void bind_device(struct raw_config_request *rq)

View File

@ -51,7 +51,7 @@ config MMC_PXA
config MMC_WBSD
tristate "Winbond W83L51xD SD/MMC Card Interface support"
depends on MMC && ISA && ISA_DMA_API
depends on MMC && ISA_DMA_API
help
This selects the Winbond(R) W83L51xD Secure digital and
Multimedia card Interface.

File diff suppressed because it is too large Load Diff

View File

@ -35,6 +35,12 @@ const int valid_ids[] = {
#define DEVICE_SD 0x03
#define WBSD_PINS_DAT3_HI 0x20
#define WBSD_PINS_DAT3_OUT 0x10
#define WBSD_PINS_GP11_HI 0x04
#define WBSD_PINS_DETECT_GP11 0x02
#define WBSD_PINS_DETECT_DAT3 0x01
#define WBSD_CMDR 0x00
#define WBSD_DFR 0x01
#define WBSD_EIR 0x02
@ -133,6 +139,7 @@ const int valid_ids[] = {
#define WBSD_CRC_OK 0x05 /* S010E (00101) */
#define WBSD_CRC_FAIL 0x0B /* S101E (01011) */
#define WBSD_DMA_SIZE 65536
struct wbsd_host
{
@ -140,6 +147,11 @@ struct wbsd_host
spinlock_t lock; /* Mutex */
int flags; /* Driver states */
#define WBSD_FCARD_PRESENT (1<<0) /* Card is present */
#define WBSD_FIGNORE_DETECT (1<<1) /* Ignore card detection */
struct mmc_request* mrq; /* Current request */
u8 isr; /* Accumulated ISR */

View File

@ -187,7 +187,7 @@ obj-$(CONFIG_TR) += tokenring/
obj-$(CONFIG_WAN) += wan/
obj-$(CONFIG_ARCNET) += arcnet/
obj-$(CONFIG_NET_PCMCIA) += pcmcia/
obj-$(CONFIG_NET_WIRELESS) += wireless/
obj-$(CONFIG_NET_RADIO) += wireless/
obj-$(CONFIG_NET_TULIP) += tulip/
obj-$(CONFIG_HAMRADIO) += hamradio/
obj-$(CONFIG_IRDA) += irda/

View File

@ -1595,7 +1595,7 @@ static struct ethtool_ops emac_ethtool_ops = {
static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct ocp_enet_private *fep = dev->priv;
uint *data = (uint *) & rq->ifr_ifru;
uint16_t *data = (uint16_t *) & rq->ifr_ifru;
switch (cmd) {
case SIOCGMIIPHY:

View File

@ -1104,7 +1104,7 @@ static void set_rx_mode(struct net_device *dev)
if (entry != 0) {
/* Avoid a chip errata by prefixing a dummy entry. Don't do
this on the ULI526X as it triggers a different problem */
if (!(tp->chip_id == ULI526X && (tp->revision = 0x40 || tp->revision == 0x50))) {
if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) {
tp->tx_buffers[entry].skb = NULL;
tp->tx_buffers[entry].mapping = 0;
tp->tx_ring[entry].length =

View File

@ -323,7 +323,7 @@ config PRISM54
For a complete list of supported cards visit <http://prism54.org>.
Here is the latest confirmed list of supported cards:
3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1)
Allnet ALL0271 PCI Card
Compex WL54G Cardbus Card
Corega CG-WLCB54GT Cardbus Card

View File

@ -126,18 +126,8 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id, struct pt_regs *r
flag = TTY_FRAME;
}
if ((rxs & port->ignore_status_mask) == 0) {
tty_insert_flip_char(tty, ch, flag);
}
if ((rxs & RXSTAT_OVERRUN) &&
tty->flip.count < TTY_FLIPBUF_SIZE) {
/*
* Overrun is special, since it's reported
* immediately, and doesn't affect the current
* character.
*/
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag);
status = *CSR_UARTFLG;
}
tty_flip_buffer_push(tty);

View File

@ -1122,18 +1122,9 @@ receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs)
}
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto ignore_char;
if ((lsr & up->port.ignore_status_mask) == 0) {
tty_insert_flip_char(tty, ch, flag);
}
if ((lsr & UART_LSR_OE) &&
tty->flip.count < TTY_FLIPBUF_SIZE) {
/*
* Overrun is special, since it's reported
* immediately, and doesn't affect the current
* character.
*/
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
ignore_char:
lsr = serial_inp(up, UART_LSR);
} while ((lsr & UART_LSR_DR) && (max_count-- > 0));

View File

@ -198,18 +198,8 @@ pl010_rx_chars(struct uart_port *port)
if (uart_handle_sysrq_char(port, ch, regs))
goto ignore_char;
if ((rsr & port->ignore_status_mask) == 0) {
tty_insert_flip_char(tty, ch, flag);
}
if ((rsr & UART01x_RSR_OE) &&
tty->flip.count < TTY_FLIPBUF_SIZE) {
/*
* Overrun is special, since it's reported
* immediately, and doesn't affect the current
* character
*/
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
uart_insert_char(port, rsr, UART01x_RSR_OE, ch, flag);
ignore_char:
status = UART_GET_FR(port);
}

View File

@ -163,18 +163,8 @@ pl011_rx_chars(struct uart_amba_port *uap)
if (uart_handle_sysrq_char(&uap->port, ch, regs))
goto ignore_char;
if ((rsr & uap->port.ignore_status_mask) == 0) {
tty_insert_flip_char(tty, ch, flag);
}
if ((rsr & UART01x_RSR_OE) &&
tty->flip.count < TTY_FLIPBUF_SIZE) {
/*
* Overrun is special, since it's reported
* immediately, and doesn't affect the current
* character
*/
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
ignore_char:
status = readw(uap->port.membase + UART01x_FR);
}

View File

@ -143,10 +143,7 @@ static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id, struct pt_regs *re
* CHECK: does overrun affect the current character?
* ASSUMPTION: it does not.
*/
if ((ch & port->ignore_status_mask & ~RXSTAT_OVERRUN) == 0)
tty_insert_flip_char(tty, ch, flg);
if ((ch & ~port->ignore_status_mask & RXSTAT_OVERRUN) == 0)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
uart_insert_char(port, ch, UARTDR_OVERR, ch, flg);
ignore_char:
status = clps_readl(SYSFLG(port));

View File

@ -161,20 +161,12 @@ receive_chars(struct uart_pxa_port *up, int *status, struct pt_regs *regs)
else if (*status & UART_LSR_FE)
flag = TTY_FRAME;
}
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto ignore_char;
if ((*status & up->port.ignore_status_mask) == 0) {
tty_insert_flip_char(tty, ch, flag);
}
if ((*status & UART_LSR_OE) &&
tty->flip.count < TTY_FLIPBUF_SIZE) {
/*
* Overrun is special, since it's reported
* immediately, and doesn't affect the current
* character.
*/
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
ignore_char:
*status = serial_in(up, UART_LSR);
} while ((*status & UART_LSR_DR) && (max_count-- > 0));

View File

@ -394,20 +394,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id, struct pt_regs *regs)
if (uart_handle_sysrq_char(port, ch, regs))
goto ignore_char;
if ((uerstat & port->ignore_status_mask) == 0) {
tty_insert_flip_char(tty, ch, flag);
}
if ((uerstat & S3C2410_UERSTAT_OVERRUN) &&
tty->flip.count < TTY_FLIPBUF_SIZE) {
/*
* Overrun is special, since it's reported
* immediately, and doesn't affect the current
* character.
*/
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, ch, flag);
ignore_char:
continue;

View File

@ -237,10 +237,7 @@ sa1100_rx_chars(struct sa1100_port *sport, struct pt_regs *regs)
if (uart_handle_sysrq_char(&sport->port, ch, regs))
goto ignore_char;
if ((status & port->ignore_status_mask & ~UTSR1_TO_SM(UTSR1_ROR)) == 0)
tty_insert_flip_char(tty, ch, flg);
if (status & ~port->ignore_status_mask & UTSR1_TO_SM(UTSR1_ROR))
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
uart_insert_char(&sport->port, status, UTSR1_TO_SM(UTSR1_ROR), ch, flg);
ignore_char:
status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |

View File

@ -190,18 +190,7 @@ lh7a40xuart_rx_chars (struct uart_port* port)
if (uart_handle_sysrq_char (port, (unsigned char) data, regs))
continue;
if ((data & port->ignore_status_mask) == 0) {
tty_insert_flip_char(tty, data, flag);
}
if ((data & RxOverrunError)
&& tty->flip.count < TTY_FLIPBUF_SIZE) {
/*
* Overrun is special, since it's reported
* immediately, and doesn't affect the current
* character
*/
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
uart_insert_char(port, data, RxOverrunError, data, flag);
}
tty_flip_buffer_push (tty);
return;

View File

@ -350,18 +350,9 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status, struct pt_regs *r
}
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto ignore_char;
if ((disr & up->port.ignore_status_mask) == 0) {
tty_insert_flip_char(tty, ch, flag);
}
if ((disr & TXX9_SIDISR_UOER) &&
tty->flip.count < TTY_FLIPBUF_SIZE) {
/*
* Overrun is special, since it's reported
* immediately, and doesn't affect the current
* character.
*/
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag);
ignore_char:
disr = sio_in(up, TXX9_SIDISR);
} while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0));

View File

@ -412,10 +412,8 @@ static inline void receive_chars(struct uart_port *port, uint8_t *status,
if (uart_handle_sysrq_char(port, ch, regs))
goto ignore_char;
if ((lsr & port->ignore_status_mask) == 0)
tty_insert_flip_char(tty, ch, flag);
if ((lsr & UART_LSR_OE) && (tty->flip.count < TTY_FLIPBUF_SIZE))
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
uart_insert_char(port, lsr, UART_LSR_OE, ch, flag);
ignore_char:
lsr = siu_read(port, UART_LSR);

View File

@ -251,7 +251,7 @@ create_elf_tables(struct linux_binprm *bprm, struct elfhdr * exec,
}
/* Populate argv and envp */
p = current->mm->arg_start;
p = current->mm->arg_end = current->mm->arg_start;
while (argc-- > 0) {
size_t len;
__put_user((elf_addr_t)p, argv++);
@ -1301,7 +1301,7 @@ static void fill_prstatus(struct elf_prstatus *prstatus,
static int fill_psinfo(struct elf_prpsinfo *psinfo, struct task_struct *p,
struct mm_struct *mm)
{
int i, len;
unsigned int i, len;
/* first copy the parameters from user space */
memset(psinfo, 0, sizeof(struct elf_prpsinfo));

View File

@ -227,6 +227,30 @@
#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 )
#define PD31_BIN_SPI2_TXD ( GPIO_PORTD | GPIO_BIN | 31 )
/*
* PWM controller
*/
#define PWMC __REG(IMX_PWM_BASE + 0x00) /* PWM Control Register */
#define PWMS __REG(IMX_PWM_BASE + 0x04) /* PWM Sample Register */
#define PWMP __REG(IMX_PWM_BASE + 0x08) /* PWM Period Register */
#define PWMCNT __REG(IMX_PWM_BASE + 0x0C) /* PWM Counter Register */
#define PWMC_HCTR (0x01<<18) /* Halfword FIFO Data Swapping */
#define PWMC_BCTR (0x01<<17) /* Byte FIFO Data Swapping */
#define PWMC_SWR (0x01<<16) /* Software Reset */
#define PWMC_CLKSRC (0x01<<15) /* Clock Source */
#define PWMC_PRESCALER(x) (((x-1) & 0x7F) << 8) /* PRESCALER */
#define PWMC_IRQ (0x01<< 7) /* Interrupt Request */
#define PWMC_IRQEN (0x01<< 6) /* Interrupt Request Enable */
#define PWMC_FIFOAV (0x01<< 5) /* FIFO Available */
#define PWMC_EN (0x01<< 4) /* Enables/Disables the PWM */
#define PWMC_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */
#define PWMC_CLKSEL(x) (((x) & 0x03) << 0) /* Clock Selection */
#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */
#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */
#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */
/*
* DMA Controller
*/

View File

@ -1,16 +1,17 @@
/* linux/include/asm-arm/arch-s3c2410/regs-nand.h
*
* Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
* Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* S3C2410 clock register definitions
* S3C2410 NAND register definitions
*
* Changelog:
* 18-Aug-2004 BJD Copied file from 2.4 and updated
* 01-May-2005 BJD Added definitions for s3c2440 controller
*/
#ifndef __ASM_ARM_REGS_NAND
@ -26,6 +27,22 @@
#define S3C2410_NFSTAT S3C2410_NFREG(0x10)
#define S3C2410_NFECC S3C2410_NFREG(0x14)
#define S3C2440_NFCONT S3C2410_NFREG(0x04)
#define S3C2440_NFCMD S3C2410_NFREG(0x08)
#define S3C2440_NFADDR S3C2410_NFREG(0x0C)
#define S3C2440_NFDATA S3C2410_NFREG(0x10)
#define S3C2440_NFECCD0 S3C2410_NFREG(0x14)
#define S3C2440_NFECCD1 S3C2410_NFREG(0x18)
#define S3C2440_NFECCD S3C2410_NFREG(0x1C)
#define S3C2440_NFSTAT S3C2410_NFREG(0x20)
#define S3C2440_NFESTAT0 S3C2410_NFREG(0x24)
#define S3C2440_NFESTAT1 S3C2410_NFREG(0x28)
#define S3C2440_NFMECC0 S3C2410_NFREG(0x2C)
#define S3C2440_NFMECC1 S3C2410_NFREG(0x30)
#define S3C2440_NFSECC S3C2410_NFREG(0x34)
#define S3C2440_NFSBLK S3C2410_NFREG(0x38)
#define S3C2440_NFEBLK S3C2410_NFREG(0x3C)
#define S3C2410_NFCONF_EN (1<<15)
#define S3C2410_NFCONF_512BYTE (1<<14)
#define S3C2410_NFCONF_4STEP (1<<13)
@ -37,7 +54,28 @@
#define S3C2410_NFSTAT_BUSY (1<<0)
/* think ECC can only be 8bit read? */
#define S3C2440_NFCONF_BUSWIDTH_8 (0<<0)
#define S3C2440_NFCONF_BUSWIDTH_16 (1<<0)
#define S3C2440_NFCONF_ADVFLASH (1<<3)
#define S3C2440_NFCONF_TACLS(x) ((x)<<12)
#define S3C2440_NFCONF_TWRPH0(x) ((x)<<8)
#define S3C2440_NFCONF_TWRPH1(x) ((x)<<4)
#define S3C2440_NFCONT_LOCKTIGHT (1<<13)
#define S3C2440_NFCONT_SOFTLOCK (1<<12)
#define S3C2440_NFCONT_ILLEGALACC_EN (1<<10)
#define S3C2440_NFCONT_RNBINT_EN (1<<9)
#define S3C2440_NFCONT_RN_FALLING (1<<8)
#define S3C2440_NFCONT_SPARE_ECCLOCK (1<<6)
#define S3C2440_NFCONT_MAIN_ECCLOCK (1<<5)
#define S3C2440_NFCONT_INITECC (1<<4)
#define S3C2440_NFCONT_nFCE (1<<1)
#define S3C2440_NFCONT_ENABLE (1<<0)
#define S3C2440_NFSTAT_READY (1<<0)
#define S3C2440_NFSTAT_nCE (1<<1)
#define S3C2440_NFSTAT_RnB_CHANGE (1<<2)
#define S3C2440_NFSTAT_ILLEGAL_ACCESS (1<<3)
#endif /* __ASM_ARM_REGS_NAND */

View File

@ -114,19 +114,8 @@ extern void __cpu_copy_user_page(void *to, const void *from,
unsigned long user);
#endif
#define clear_user_page(addr,vaddr,pg) \
do { \
preempt_disable(); \
__cpu_clear_user_page(addr, vaddr); \
preempt_enable(); \
} while (0)
#define copy_user_page(to,from,vaddr,pg) \
do { \
preempt_disable(); \
__cpu_copy_user_page(to, from, vaddr); \
preempt_enable(); \
} while (0)
#define clear_user_page(addr,vaddr,pg) __cpu_clear_user_page(addr, vaddr)
#define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr)
#define clear_page(page) memzero((void *)(page), PAGE_SIZE)
extern void copy_page(void *to, const void *from);
@ -171,6 +160,9 @@ typedef unsigned long pgprot_t;
#endif /* STRICT_MM_TYPECHECKS */
/* the upper-most page table pointer */
extern pmd_t *top_pmd;
/* Pure 2^n version of get_order */
static inline int get_order(unsigned long size)
{

View File

@ -479,6 +479,25 @@ uart_handle_cts_change(struct uart_port *port, unsigned int status)
}
}
#include <linux/tty_flip.h>
static inline void
uart_insert_char(struct uart_port *port, unsigned int status,
unsigned int overrun, unsigned int ch, unsigned int flag)
{
struct tty_struct *tty = port->info->tty;
if ((status & port->ignore_status_mask & ~overrun) == 0)
tty_insert_flip_char(tty, ch, flag);
/*
* Overrun is special. Since it's reported immediately,
* it doesn't affect the current character.
*/
if (status & ~port->ignore_status_mask & overrun)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
/*
* UART_ENABLE_MS - determine if port should enable modem status irqs
*/