ath9k: cleanup beacon parameters configuration

This patch configures the beacon timers with beacon interval
and beacon period passed through vif.bss_conf. Also cache the
currecnt beacon configuration which will be used to configure
the beacon timers when the driver triggers it after reset.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Vasanthakumar Thiagarajan 2009-05-15 18:59:22 +05:30 committed by John W. Linville
parent d31e20af9f
commit 6b96f93e96
2 changed files with 35 additions and 27 deletions

View File

@ -600,6 +600,7 @@ struct ath_softc {
struct ath9k_debug debug;
#endif
struct ath_bus_ops *bus_ops;
struct ath_beacon_config cur_beacon_conf;
};
struct ath_wiphy {

View File

@ -695,43 +695,50 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc,
sc->beacon.bmisscnt = 0;
ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)
/* FIXME: Handle properly when vif is NULL */
if (vif && sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)
ath_beacon_start_adhoc(sc, vif);
}
void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
{
struct ath_beacon_config conf;
struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
enum nl80211_iftype iftype;
/* Setup the beacon configuration parameters */
memset(&conf, 0, sizeof(struct ath_beacon_config));
conf.beacon_interval = sc->beacon_interval ? : ATH_DEFAULT_BINTVAL;
conf.listen_interval = 1;
conf.dtim_period = conf.beacon_interval;
conf.dtim_count = 1;
conf.bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf.beacon_interval;
if (vif) {
struct ath_vif *avp = (struct ath_vif *)vif->drv_priv;
struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
switch(avp->av_opmode) {
case NL80211_IFTYPE_AP:
ath_beacon_config_ap(sc, &conf);
break;
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_MESH_POINT:
ath_beacon_config_adhoc(sc, &conf, vif);
break;
case NL80211_IFTYPE_STATION:
ath_beacon_config_sta(sc, &conf);
break;
default:
DPRINTF(sc, ATH_DBG_CONFIG,
"Unsupported beaconing mode\n");
return;
}
iftype = vif->type;
sc->sc_flags |= SC_OP_BEACONS;
cur_conf->beacon_interval = bss_conf->beacon_int;
cur_conf->dtim_period = bss_conf->dtim_period;
cur_conf->listen_interval = 1;
cur_conf->dtim_count = 1;
cur_conf->bmiss_timeout =
ATH_DEFAULT_BMISS_LIMIT * cur_conf->beacon_interval;
} else {
iftype = sc->sc_ah->opmode;
}
switch (iftype) {
case NL80211_IFTYPE_AP:
ath_beacon_config_ap(sc, cur_conf);
break;
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_MESH_POINT:
ath_beacon_config_adhoc(sc, cur_conf, vif);
break;
case NL80211_IFTYPE_STATION:
ath_beacon_config_sta(sc, cur_conf);
break;
default:
DPRINTF(sc, ATH_DBG_CONFIG,
"Unsupported beaconing mode\n");
return;
}
sc->sc_flags |= SC_OP_BEACONS;
}