powerpc/44x: break out cpu init code into stand-alone function

The 47x platform supports multiple cores and shares code with 44x.
Break out code that is common for initializing the primary and secondary
cpus into a function which can be called for both.

Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
This commit is contained in:
Dave Kleikamp 2010-03-05 10:43:07 +00:00 committed by Josh Boyer
parent 471c70ff39
commit 795033c344

View File

@ -69,165 +69,7 @@ _ENTRY(_start);
mr r27,r7
li r24,0 /* CPU number */
/*
* In case the firmware didn't do it, we apply some workarounds
* that are good for all 440 core variants here
*/
mfspr r3,SPRN_CCR0
rlwinm r3,r3,0,0,27 /* disable icache prefetch */
isync
mtspr SPRN_CCR0,r3
isync
sync
/*
* Set up the initial MMU state
*
* We are still executing code at the virtual address
* mappings set by the firmware for the base of RAM.
*
* We first invalidate all TLB entries but the one
* we are running from. We then load the KERNELBASE
* mappings so we can begin to use kernel addresses
* natively and so the interrupt vector locations are
* permanently pinned (necessary since Book E
* implementations always have translation enabled).
*
* TODO: Use the known TLB entry we are running from to
* determine which physical region we are located
* in. This can be used to determine where in RAM
* (on a shared CPU system) or PCI memory space
* (on a DRAMless system) we are located.
* For now, we assume a perfect world which means
* we are located at the base of DRAM (physical 0).
*/
/*
* Search TLB for entry that we are currently using.
* Invalidate all entries but the one we are using.
*/
/* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
mfspr r3,SPRN_PID /* Get PID */
mfmsr r4 /* Get MSR */
andi. r4,r4,MSR_IS@l /* TS=1? */
beq wmmucr /* If not, leave STS=0 */
oris r3,r3,PPC44x_MMUCR_STS@h /* Set STS=1 */
wmmucr: mtspr SPRN_MMUCR,r3 /* Put MMUCR */
sync
bl invstr /* Find our address */
invstr: mflr r5 /* Make it accessible */
tlbsx r23,0,r5 /* Find entry we are in */
li r4,0 /* Start at TLB entry 0 */
li r3,0 /* Set PAGEID inval value */
1: cmpw r23,r4 /* Is this our entry? */
beq skpinv /* If so, skip the inval */
tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */
skpinv: addi r4,r4,1 /* Increment */
cmpwi r4,64 /* Are we done? */
bne 1b /* If not, repeat */
isync /* If so, context change */
/*
* Configure and load pinned entry into TLB slot 63.
*/
lis r3,PAGE_OFFSET@h
ori r3,r3,PAGE_OFFSET@l
/* Kernel is at the base of RAM */
li r4, 0 /* Load the kernel physical address */
/* Load the kernel PID = 0 */
li r0,0
mtspr SPRN_PID,r0
sync
/* Initialize MMUCR */
li r5,0
mtspr SPRN_MMUCR,r5
sync
/* pageid fields */
clrrwi r3,r3,10 /* Mask off the effective page number */
ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
/* xlat fields */
clrrwi r4,r4,10 /* Mask off the real page number */
/* ERPN is 0 for first 4GB page */
/* attrib fields */
/* Added guarded bit to protect against speculative loads/stores */
li r5,0
ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
li r0,63 /* TLB slot 63 */
tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */
/* Force context change */
mfmsr r0
mtspr SPRN_SRR1, r0
lis r0,3f@h
ori r0,r0,3f@l
mtspr SPRN_SRR0,r0
sync
rfi
/* If necessary, invalidate original entry we used */
3: cmpwi r23,63
beq 4f
li r6,0
tlbwe r6,r23,PPC44x_TLB_PAGEID
isync
4:
#ifdef CONFIG_PPC_EARLY_DEBUG_44x
/* Add UART mapping for early debug. */
/* pageid fields */
lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h
ori r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K
/* xlat fields */
lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h
ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH
/* attrib fields */
li r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G)
li r0,62 /* TLB slot 0 */
tlbwe r3,r0,PPC44x_TLB_PAGEID
tlbwe r4,r0,PPC44x_TLB_XLAT
tlbwe r5,r0,PPC44x_TLB_ATTRIB
/* Force context change */
isync
#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
/* Establish the interrupt vector offsets */
SET_IVOR(0, CriticalInput);
SET_IVOR(1, MachineCheck);
SET_IVOR(2, DataStorage);
SET_IVOR(3, InstructionStorage);
SET_IVOR(4, ExternalInput);
SET_IVOR(5, Alignment);
SET_IVOR(6, Program);
SET_IVOR(7, FloatingPointUnavailable);
SET_IVOR(8, SystemCall);
SET_IVOR(9, AuxillaryProcessorUnavailable);
SET_IVOR(10, Decrementer);
SET_IVOR(11, FixedIntervalTimer);
SET_IVOR(12, WatchdogTimer);
SET_IVOR(13, DataTLBError);
SET_IVOR(14, InstructionTLBError);
SET_IVOR(15, DebugCrit);
/* Establish the interrupt vector base */
lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
mtspr SPRN_IVPR,r4
bl init_cpu_state
/*
* This is where the main kernel code starts.
@ -646,6 +488,176 @@ _GLOBAL(set_context)
isync /* Force context change */
blr
/*
* Init CPU state. This is called at boot time or for secondary CPUs
* to setup initial TLB entries, setup IVORs, etc...
*/
_GLOBAL(init_cpu_state)
mflr r22
/*
* In case the firmware didn't do it, we apply some workarounds
* that are good for all 440 core variants here
*/
mfspr r3,SPRN_CCR0
rlwinm r3,r3,0,0,27 /* disable icache prefetch */
isync
mtspr SPRN_CCR0,r3
isync
sync
/*
* Set up the initial MMU state
*
* We are still executing code at the virtual address
* mappings set by the firmware for the base of RAM.
*
* We first invalidate all TLB entries but the one
* we are running from. We then load the KERNELBASE
* mappings so we can begin to use kernel addresses
* natively and so the interrupt vector locations are
* permanently pinned (necessary since Book E
* implementations always have translation enabled).
*
* TODO: Use the known TLB entry we are running from to
* determine which physical region we are located
* in. This can be used to determine where in RAM
* (on a shared CPU system) or PCI memory space
* (on a DRAMless system) we are located.
* For now, we assume a perfect world which means
* we are located at the base of DRAM (physical 0).
*/
/*
* Search TLB for entry that we are currently using.
* Invalidate all entries but the one we are using.
*/
/* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
mfspr r3,SPRN_PID /* Get PID */
mfmsr r4 /* Get MSR */
andi. r4,r4,MSR_IS@l /* TS=1? */
beq wmmucr /* If not, leave STS=0 */
oris r3,r3,PPC44x_MMUCR_STS@h /* Set STS=1 */
wmmucr: mtspr SPRN_MMUCR,r3 /* Put MMUCR */
sync
bl invstr /* Find our address */
invstr: mflr r5 /* Make it accessible */
tlbsx r23,0,r5 /* Find entry we are in */
li r4,0 /* Start at TLB entry 0 */
li r3,0 /* Set PAGEID inval value */
1: cmpw r23,r4 /* Is this our entry? */
beq skpinv /* If so, skip the inval */
tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */
skpinv: addi r4,r4,1 /* Increment */
cmpwi r4,64 /* Are we done? */
bne 1b /* If not, repeat */
isync /* If so, context change */
/*
* Configure and load pinned entry into TLB slot 63.
*/
lis r3,PAGE_OFFSET@h
ori r3,r3,PAGE_OFFSET@l
/* Kernel is at the base of RAM */
li r4, 0 /* Load the kernel physical address */
/* Load the kernel PID = 0 */
li r0,0
mtspr SPRN_PID,r0
sync
/* Initialize MMUCR */
li r5,0
mtspr SPRN_MMUCR,r5
sync
/* pageid fields */
clrrwi r3,r3,10 /* Mask off the effective page number */
ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
/* xlat fields */
clrrwi r4,r4,10 /* Mask off the real page number */
/* ERPN is 0 for first 4GB page */
/* attrib fields */
/* Added guarded bit to protect against speculative loads/stores */
li r5,0
ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
li r0,63 /* TLB slot 63 */
tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */
/* Force context change */
mfmsr r0
mtspr SPRN_SRR1, r0
lis r0,3f@h
ori r0,r0,3f@l
mtspr SPRN_SRR0,r0
sync
rfi
/* If necessary, invalidate original entry we used */
3: cmpwi r23,63
beq 4f
li r6,0
tlbwe r6,r23,PPC44x_TLB_PAGEID
isync
4:
#ifdef CONFIG_PPC_EARLY_DEBUG_44x
/* Add UART mapping for early debug. */
/* pageid fields */
lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h
ori r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K
/* xlat fields */
lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h
ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH
/* attrib fields */
li r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G)
li r0,62 /* TLB slot 0 */
tlbwe r3,r0,PPC44x_TLB_PAGEID
tlbwe r4,r0,PPC44x_TLB_XLAT
tlbwe r5,r0,PPC44x_TLB_ATTRIB
/* Force context change */
isync
#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
/* Establish the interrupt vector offsets */
SET_IVOR(0, CriticalInput);
SET_IVOR(1, MachineCheck);
SET_IVOR(2, DataStorage);
SET_IVOR(3, InstructionStorage);
SET_IVOR(4, ExternalInput);
SET_IVOR(5, Alignment);
SET_IVOR(6, Program);
SET_IVOR(7, FloatingPointUnavailable);
SET_IVOR(8, SystemCall);
SET_IVOR(9, AuxillaryProcessorUnavailable);
SET_IVOR(10, Decrementer);
SET_IVOR(11, FixedIntervalTimer);
SET_IVOR(12, WatchdogTimer);
SET_IVOR(13, DataTLBError);
SET_IVOR(14, InstructionTLBError);
SET_IVOR(15, DebugCrit);
/* Establish the interrupt vector base */
lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
mtspr SPRN_IVPR,r4
addis r22,r22,KERNELBASE@h
mtlr r22
blr
/*
* We put a few things here that have to be page-aligned. This stuff
* goes at the beginning of the data segment, which is page-aligned.