x86: merge native_smp_prepare_cpus

With the previous changes, code for native_smp_prepare_cpus()
in i386 and x86_64 now look very similar. merge them into
smpboot.c. Minor differences are inside ifdef

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit is contained in:
Glauber de Oliveira Costa 2008-03-19 14:26:11 -03:00 committed by Ingo Molnar
parent 9f3734f631
commit 8aef135c73
3 changed files with 170 additions and 278 deletions

View File

@ -7,6 +7,7 @@
#include <linux/err.h>
#include <linux/nmi.h>
#include <asm/acpi.h>
#include <asm/desc.h>
#include <asm/nmi.h>
#include <asm/irq.h>
@ -75,6 +76,8 @@ EXPORT_PER_CPU_SYMBOL(cpu_info);
static atomic_t init_deasserted;
static int boot_cpu_logical_apicid;
/* ready for x86_64, no harm for x86, since it will overwrite after alloc */
unsigned char *trampoline_base = __va(SMP_TRAMPOLINE_BASE);
@ -1001,6 +1004,173 @@ int __cpuinit native_cpu_up(unsigned int cpu)
return 0;
}
/*
* Fall back to non SMP mode after errors.
*
* RED-PEN audit/test this more. I bet there is more state messed up here.
*/
static __init void disable_smp(void)
{
cpu_present_map = cpumask_of_cpu(0);
cpu_possible_map = cpumask_of_cpu(0);
#ifdef CONFIG_X86_32
smpboot_clear_io_apic_irqs();
#endif
if (smp_found_config)
phys_cpu_present_map =
physid_mask_of_physid(boot_cpu_physical_apicid);
else
phys_cpu_present_map = physid_mask_of_physid(0);
map_cpu_to_logical_apicid();
cpu_set(0, per_cpu(cpu_sibling_map, 0));
cpu_set(0, per_cpu(cpu_core_map, 0));
}
/*
* Various sanity checks.
*/
static int __init smp_sanity_check(unsigned max_cpus)
{
if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
printk(KERN_WARNING "weird, boot CPU (#%d) not listed"
"by the BIOS.\n", hard_smp_processor_id());
physid_set(hard_smp_processor_id(), phys_cpu_present_map);
}
/*
* If we couldn't find an SMP configuration at boot time,
* get out of here now!
*/
if (!smp_found_config && !acpi_lapic) {
printk(KERN_NOTICE "SMP motherboard not detected.\n");
disable_smp();
if (APIC_init_uniprocessor())
printk(KERN_NOTICE "Local APIC not detected."
" Using dummy APIC emulation.\n");
return -1;
}
/*
* Should not be necessary because the MP table should list the boot
* CPU too, but we do it for the sake of robustness anyway.
*/
if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
printk(KERN_NOTICE
"weird, boot CPU (#%d) not listed by the BIOS.\n",
boot_cpu_physical_apicid);
physid_set(hard_smp_processor_id(), phys_cpu_present_map);
}
/*
* If we couldn't find a local APIC, then get out of here now!
*/
if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) &&
!cpu_has_apic) {
printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
boot_cpu_physical_apicid);
printk(KERN_ERR "... forcing use of dummy APIC emulation."
"(tell your hw vendor)\n");
smpboot_clear_io_apic();
return -1;
}
verify_local_APIC();
/*
* If SMP should be disabled, then really disable it!
*/
if (!max_cpus) {
printk(KERN_INFO "SMP mode deactivated,"
"forcing use of dummy APIC emulation.\n");
smpboot_clear_io_apic();
#ifdef CONFIG_X86_32
if (nmi_watchdog == NMI_LOCAL_APIC) {
printk(KERN_INFO "activating minimal APIC for"
"NMI watchdog use.\n");
connect_bsp_APIC();
setup_local_APIC();
end_local_APIC_setup();
}
#endif
return -1;
}
return 0;
}
static void __init smp_cpu_index_default(void)
{
int i;
struct cpuinfo_x86 *c;
for_each_cpu_mask(i, cpu_possible_map) {
c = &cpu_data(i);
/* mark all to hotplug */
c->cpu_index = NR_CPUS;
}
}
/*
* Prepare for SMP bootup. The MP table or ACPI has been read
* earlier. Just do some sanity checking here and enable APIC mode.
*/
void __init native_smp_prepare_cpus(unsigned int max_cpus)
{
nmi_watchdog_default();
smp_cpu_index_default();
current_cpu_data = boot_cpu_data;
cpu_callin_map = cpumask_of_cpu(0);
mb();
/*
* Setup boot CPU information
*/
smp_store_cpu_info(0); /* Final full version of the data */
boot_cpu_logical_apicid = logical_smp_processor_id();
current_thread_info()->cpu = 0; /* needed? */
set_cpu_sibling_map(0);
if (smp_sanity_check(max_cpus) < 0) {
printk(KERN_INFO "SMP disabled\n");
disable_smp();
return;
}
if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_physical_apicid) {
panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_physical_apicid);
/* Or can we switch back to PIC here? */
}
#ifdef CONFIG_X86_32
connect_bsp_APIC();
#endif
/*
* Switch from PIC to APIC mode.
*/
setup_local_APIC();
#ifdef CONFIG_X86_64
/*
* Enable IO APIC before setting up error vector
*/
if (!skip_ioapic_setup && nr_ioapics)
enable_IO_APIC();
#endif
end_local_APIC_setup();
map_cpu_to_logical_apicid();
setup_portio_remap();
smpboot_setup_io_apic();
/*
* Set up local APIC timer on boot CPU.
*/
printk(KERN_INFO "CPU%d: ", 0);
print_cpu_info(&cpu_data(0));
setup_boot_clock();
}
/*
* Early setup to make printk work.
*/

View File

@ -74,7 +74,6 @@ EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
u8 apicid_2_node[MAX_APICID];
extern void map_cpu_to_logical_apicid(void);
extern void unmap_cpu_to_logical_apicid(int cpu);
#ifdef CONFIG_HOTPLUG_CPU
@ -94,144 +93,8 @@ void cpu_exit_clear(void)
}
#endif
static int boot_cpu_logical_apicid;
/* Where the IO area was mapped on multiquad, always 0 otherwise */
void *xquad_portio;
#ifdef CONFIG_X86_NUMAQ
EXPORT_SYMBOL(xquad_portio);
#endif
static void __init disable_smp(void)
{
cpu_possible_map = cpumask_of_cpu(0);
cpu_present_map = cpumask_of_cpu(0);
smpboot_clear_io_apic_irqs();
if (smp_found_config)
phys_cpu_present_map =
physid_mask_of_physid(boot_cpu_physical_apicid);
else
phys_cpu_present_map = physid_mask_of_physid(0);
map_cpu_to_logical_apicid();
cpu_set(0, per_cpu(cpu_sibling_map, 0));
cpu_set(0, per_cpu(cpu_core_map, 0));
}
static int __init smp_sanity_check(unsigned max_cpus)
{
if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
printk(KERN_WARNING "weird, boot CPU (#%d) not listed"
"by the BIOS.\n", hard_smp_processor_id());
physid_set(hard_smp_processor_id(), phys_cpu_present_map);
}
/*
* If we couldn't find an SMP configuration at boot time,
* get out of here now!
*/
if (!smp_found_config && !acpi_lapic) {
printk(KERN_NOTICE "SMP motherboard not detected.\n");
disable_smp();
if (APIC_init_uniprocessor())
printk(KERN_NOTICE "Local APIC not detected."
" Using dummy APIC emulation.\n");
return -1;
}
/*
* Should not be necessary because the MP table should list the boot
* CPU too, but we do it for the sake of robustness anyway.
* Makes no sense to do this check in clustered apic mode, so skip it
*/
if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
boot_cpu_physical_apicid);
physid_set(hard_smp_processor_id(), phys_cpu_present_map);
}
/*
* If we couldn't find a local APIC, then get out of here now!
*/
if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) && !cpu_has_apic) {
printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
boot_cpu_physical_apicid);
printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
smpboot_clear_io_apic();
return -1;
}
verify_local_APIC();
/*
* If SMP should be disabled, then really disable it!
*/
if (!max_cpus) {
smp_found_config = 0;
printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
if (nmi_watchdog == NMI_LOCAL_APIC) {
printk(KERN_INFO "activating minimal APIC for NMI watchdog use.\n");
connect_bsp_APIC();
setup_local_APIC();
end_local_APIC_setup();
}
smpboot_clear_io_apic();
return -1;
}
return 0;
}
static void __init smp_cpu_index_default(void)
{
int i;
struct cpuinfo_x86 *c;
for_each_cpu_mask(i, cpu_possible_map) {
c = &cpu_data(i);
/* mark all to hotplug */
c->cpu_index = NR_CPUS;
}
}
void __init native_smp_prepare_cpus(unsigned int max_cpus)
{
nmi_watchdog_default();
smp_cpu_index_default();
current_cpu_data = boot_cpu_data;
cpu_callin_map = cpumask_of_cpu(0);
mb();
/*
* Setup boot CPU information
*/
smp_store_cpu_info(0); /* Final full version of the data */
boot_cpu_logical_apicid = logical_smp_processor_id();
current_thread_info()->cpu = 0;
set_cpu_sibling_map(0);
if (smp_sanity_check(max_cpus) < 0) {
printk(KERN_INFO "SMP disabled\n");
disable_smp();
return;
}
if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_physical_apicid) {
panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_physical_apicid);
/* Or can we switch back to PIC here? */
}
connect_bsp_APIC();
setup_local_APIC();
end_local_APIC_setup();
map_cpu_to_logical_apicid();
setup_portio_remap();
smpboot_setup_io_apic();
printk(KERN_INFO "CPU%d: ", 0);
print_cpu_info(&cpu_data(0));
setup_boot_clock();
}

View File

@ -71,144 +71,3 @@ int smp_threads_ready;
cycles_t cacheflush_time;
unsigned long cache_decay_ticks;
static int boot_cpu_logical_apicid;
/*
* Fall back to non SMP mode after errors.
*
* RED-PEN audit/test this more. I bet there is more state messed up here.
*/
static __init void disable_smp(void)
{
cpu_present_map = cpumask_of_cpu(0);
cpu_possible_map = cpumask_of_cpu(0);
if (smp_found_config)
phys_cpu_present_map =
physid_mask_of_physid(boot_cpu_physical_apicid);
else
phys_cpu_present_map = physid_mask_of_physid(0);
cpu_set(0, per_cpu(cpu_sibling_map, 0));
cpu_set(0, per_cpu(cpu_core_map, 0));
}
/*
* Various sanity checks.
*/
static int __init smp_sanity_check(unsigned max_cpus)
{
if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
hard_smp_processor_id());
physid_set(hard_smp_processor_id(), phys_cpu_present_map);
}
/*
* If we couldn't find an SMP configuration at boot time,
* get out of here now!
*/
if (!smp_found_config && !acpi_lapic) {
printk(KERN_NOTICE "SMP motherboard not detected.\n");
disable_smp();
if (APIC_init_uniprocessor())
printk(KERN_NOTICE "Local APIC not detected."
" Using dummy APIC emulation.\n");
return -1;
}
/*
* Should not be necessary because the MP table should list the boot
* CPU too, but we do it for the sake of robustness anyway.
*/
if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
printk(KERN_NOTICE
"weird, boot CPU (#%d) not listed by the BIOS.\n",
boot_cpu_physical_apicid);
physid_set(hard_smp_processor_id(), phys_cpu_present_map);
}
/*
* If we couldn't find a local APIC, then get out of here now!
*/
if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) &&
!cpu_has_apic) {
printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
boot_cpu_physical_apicid);
printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
smpboot_clear_io_apic();
return -1;
}
verify_local_APIC();
/*
* If SMP should be disabled, then really disable it!
*/
if (!max_cpus) {
printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
smpboot_clear_io_apic();
return -1;
}
return 0;
}
static void __init smp_cpu_index_default(void)
{
int i;
struct cpuinfo_x86 *c;
for_each_cpu_mask(i, cpu_possible_map) {
c = &cpu_data(i);
/* mark all to hotplug */
c->cpu_index = NR_CPUS;
}
}
/*
* Prepare for SMP bootup. The MP table or ACPI has been read
* earlier. Just do some sanity checking here and enable APIC mode.
*/
void __init native_smp_prepare_cpus(unsigned int max_cpus)
{
nmi_watchdog_default();
smp_cpu_index_default();
cpu_callin_map = cpumask_of_cpu(0);
mb();
current_cpu_data = boot_cpu_data;
boot_cpu_logical_apicid = logical_smp_processor_id();
current_thread_info()->cpu = 0; /* needed? */
set_cpu_sibling_map(0);
if (smp_sanity_check(max_cpus) < 0) {
printk(KERN_INFO "SMP disabled\n");
disable_smp();
return;
}
if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_physical_apicid) {
panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_physical_apicid);
/* Or can we switch back to PIC here? */
}
/*
* Switch from PIC to APIC mode.
*/
setup_local_APIC();
/*
* Enable IO APIC before setting up error vector
*/
if (!skip_ioapic_setup && nr_ioapics)
enable_IO_APIC();
end_local_APIC_setup();
/*
* Set up local APIC timer on boot CPU.
*/
setup_boot_clock();
printk(KERN_INFO "CPU%d: ", 0);
print_cpu_info(&cpu_data(0));
}