Merge branch 'x86/urgent' into x86/pat

Conflicts:
	arch/x86/mm/pageattr.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit is contained in:
Ingo Molnar 2008-08-22 06:06:51 +02:00
commit 8b53b57576
927 changed files with 30299 additions and 10268 deletions

View File

@ -102,6 +102,13 @@ C-procfs-example = procfs_example.xml
C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example))
$(obj)/procfs-guide.xml: $(C-procfs-example2)
# List of programs to build
##oops, this is a kernel module::hostprogs-y := procfs_example
obj-m += procfs_example.o
# Tell kbuild to always build the programs
always := $(hostprogs-y)
notfoundtemplate = echo "*** You have to install docbook-utils or xmlto ***"; \
exit 1
db2xtemplate = db2TYPE -o $(dir $@) $<

View File

@ -189,8 +189,6 @@ static int __init init_procfs_example(void)
return 0;
no_symlink:
remove_proc_entry("tty", example_dir);
no_tty:
remove_proc_entry("bar", example_dir);
no_bar:
remove_proc_entry("foo", example_dir);
@ -206,7 +204,6 @@ static int __init init_procfs_example(void)
static void __exit cleanup_procfs_example(void)
{
remove_proc_entry("jiffies_too", example_dir);
remove_proc_entry("tty", example_dir);
remove_proc_entry("bar", example_dir);
remove_proc_entry("foo", example_dir);
remove_proc_entry("jiffies", example_dir);
@ -222,3 +219,4 @@ module_exit(cleanup_procfs_example);
MODULE_AUTHOR("Erik Mouw");
MODULE_DESCRIPTION("procfs examples");
MODULE_LICENSE("GPL");

3
Documentation/Makefile Normal file
View File

@ -0,0 +1,3 @@
obj-m := DocBook/ accounting/ auxdisplay/ connector/ \
filesystems/configfs/ ia64/ networking/ \
pcmcia/ spi/ video4linux/ vm/ watchdog/src/

View File

@ -0,0 +1,10 @@
# kbuild trick to avoid linker error. Can be omitted if a module is built.
obj- := dummy.o
# List of programs to build
hostprogs-y := getdelays
# Tell kbuild to always build the programs
always := $(hostprogs-y)
HOSTCFLAGS_getdelays.o += -I$(objtree)/usr/include

View File

@ -201,13 +201,19 @@ void print_delayacct(struct taskstats *t)
"RECLAIM %12s%15s\n"
" %15llu%15llu\n",
"count", "real total", "virtual total", "delay total",
t->cpu_count, t->cpu_run_real_total, t->cpu_run_virtual_total,
t->cpu_delay_total,
(unsigned long long)t->cpu_count,
(unsigned long long)t->cpu_run_real_total,
(unsigned long long)t->cpu_run_virtual_total,
(unsigned long long)t->cpu_delay_total,
"count", "delay total",
t->blkio_count, t->blkio_delay_total,
"count", "delay total", t->swapin_count, t->swapin_delay_total,
(unsigned long long)t->blkio_count,
(unsigned long long)t->blkio_delay_total,
"count", "delay total",
t->freepages_count, t->freepages_delay_total);
(unsigned long long)t->swapin_count,
(unsigned long long)t->swapin_delay_total,
"count", "delay total",
(unsigned long long)t->freepages_count,
(unsigned long long)t->freepages_delay_total);
}
void task_context_switch_counts(struct taskstats *t)
@ -215,14 +221,17 @@ void task_context_switch_counts(struct taskstats *t)
printf("\n\nTask %15s%15s\n"
" %15llu%15llu\n",
"voluntary", "nonvoluntary",
t->nvcsw, t->nivcsw);
(unsigned long long)t->nvcsw, (unsigned long long)t->nivcsw);
}
void print_cgroupstats(struct cgroupstats *c)
{
printf("sleeping %llu, blocked %llu, running %llu, stopped %llu, "
"uninterruptible %llu\n", c->nr_sleeping, c->nr_io_wait,
c->nr_running, c->nr_stopped, c->nr_uninterruptible);
"uninterruptible %llu\n", (unsigned long long)c->nr_sleeping,
(unsigned long long)c->nr_io_wait,
(unsigned long long)c->nr_running,
(unsigned long long)c->nr_stopped,
(unsigned long long)c->nr_uninterruptible);
}

View File

@ -13,6 +13,21 @@ Introduction
data-sheet/users manual to find out the complete list.
GPIOLIB
-------
With the event of the GPIOLIB in drivers/gpio, support for some
of the GPIO functions such as reading and writing a pin will
be removed in favour of this common access method.
Once all the extant drivers have been converted, the functions
listed below will be removed (they may be marked as __deprecated
in the near future).
- s3c2410_gpio_getpin
- s3c2410_gpio_setpin
Headers
-------

View File

@ -8,9 +8,10 @@ Introduction
The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
S3C2412, S3C2413, S3C2440 and S3C2442 devices are supported.
S3C2412, S3C2413, S3C2440, S3C2442 and S3C2443 devices are supported.
Support for the S3C2400 and S3C24A0 series are in progress.
Support for the S3C2400 series is in progress.
Configuration
-------------
@ -38,6 +39,22 @@ Layout
Register, kernel and platform data definitions are held in the
arch/arm/mach-s3c2410 directory./include/mach
arch/arm/plat-s3c24xx:
Files in here are either common to all the s3c24xx family,
or are common to only some of them with names to indicate this
status. The files that are not common to all are generally named
with the initial cpu they support in the series to ensure a short
name without any possibility of confusion with newer devices.
As an example, initially s3c244x would cover s3c2440 and s3c2442, but
with the s3c2443 which does not share many of the same drivers in
this directory, the name becomes invalid. We stick to s3c2440-<x>
to indicate a driver that is s3c2440 and s3c2442 compatible.
This does mean that to find the status of any given SoC, a number
of directories may need to be searched.
Machines
--------
@ -159,6 +176,17 @@ NAND
For more information see Documentation/arm/Samsung-S3C24XX/NAND.txt
SD/MMC
------
The SD/MMC hardware pre S3C2443 is supported in the current
kernel, the driver is drivers/mmc/host/s3cmci.c and supports
1 and 4 bit SD or MMC cards.
The SDIO behaviour of this driver has not been fully tested. There is no
current support for hardware SDIO interrupts.
Serial
------
@ -178,6 +206,9 @@ GPIO
The core contains support for manipulating the GPIO, see the
documentation in GPIO.txt in the same directory as this file.
Newer kernels carry GPIOLIB, and support is being moved towards
this with some of the older support in line to be removed.
Clock Management
----------------

View File

@ -0,0 +1,10 @@
# kbuild trick to avoid linker error. Can be omitted if a module is built.
obj- := dummy.o
# List of programs to build
hostprogs-y := cfag12864b-example
# Tell kbuild to always build the programs
always := $(hostprogs-y)
HOSTCFLAGS_cfag12864b-example.o += -I$(objtree)/usr/include

View File

@ -0,0 +1,11 @@
ifneq ($(CONFIG_CONNECTOR),)
obj-m += cn_test.o
endif
# List of programs to build
hostprogs-y := ucon
# Tell kbuild to always build the programs
always := $(hostprogs-y)
HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include

View File

@ -59,15 +59,10 @@ apicid values in those tables for disabled apics. In the event BIOS doesn't
mark such hot-pluggable cpus as disabled entries, one could use this
parameter "additional_cpus=x" to represent those cpus in the cpu_possible_map.
s390 uses the number of cpus it detects at IPL time to also the number of bits
in cpu_possible_map. If it is desired to add additional cpus at a later time
the number should be specified using this option or the possible_cpus option.
possible_cpus=n [s390 only] use this to set hotpluggable cpus.
This option sets possible_cpus bits in
cpu_possible_map. Thus keeping the numbers of bits set
constant even if the machine gets rebooted.
This option overrides additional_cpus.
CPU maps and such
-----------------

View File

@ -2560,9 +2560,6 @@ Your cooperation is appreciated.
96 = /dev/usb/hiddev0 1st USB HID device
...
111 = /dev/usb/hiddev15 16th USB HID device
112 = /dev/usb/auer0 1st auerswald ISDN device
...
127 = /dev/usb/auer15 16th auerswald ISDN device
128 = /dev/usb/brlvgr0 First Braille Voyager device
...
131 = /dev/usb/brlvgr3 Fourth Braille Voyager device

View File

@ -19,15 +19,6 @@ Who: Pavel Machek <pavel@suse.cz>
---------------------------
What: old NCR53C9x driver
When: October 2007
Why: Replaced by the much better esp_scsi driver. Actual low-level
driver can be ported over almost trivially.
Who: David Miller <davem@davemloft.net>
Christoph Hellwig <hch@lst.de>
---------------------------
What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
When: December 2008
Files: include/linux/video_decoder.h include/linux/videodev.h

View File

@ -0,0 +1,3 @@
ifneq ($(CONFIG_CONFIGFS_FS),)
obj-m += configfs_example_explicit.o configfs_example_macros.o
endif

View File

@ -3,14 +3,14 @@ Quota subsystem
===============
Quota subsystem allows system administrator to set limits on used space and
number of used inodes (inode is a filesystem structure which is associated
with each file or directory) for users and/or groups. For both used space and
number of used inodes there are actually two limits. The first one is called
softlimit and the second one hardlimit. An user can never exceed a hardlimit
for any resource. User is allowed to exceed softlimit but only for limited
period of time. This period is called "grace period" or "grace time". When
grace time is over, user is not able to allocate more space/inodes until he
frees enough of them to get below softlimit.
number of used inodes (inode is a filesystem structure which is associated with
each file or directory) for users and/or groups. For both used space and number
of used inodes there are actually two limits. The first one is called softlimit
and the second one hardlimit. An user can never exceed a hardlimit for any
resource (unless he has CAP_SYS_RESOURCE capability). User is allowed to exceed
softlimit but only for limited period of time. This period is called "grace
period" or "grace time". When grace time is over, user is not able to allocate
more space/inodes until he frees enough of them to get below softlimit.
Quota limits (and amount of grace time) are set independently for each
filesystem.
@ -53,6 +53,12 @@ in parentheses):
QUOTA_NL_BSOFTLONGWARN - space (block) softlimit is exceeded
longer than given grace period.
QUOTA_NL_BSOFTWARN - space (block) softlimit
- four warnings are also defined for the event when user stops
exceeding some limit:
QUOTA_NL_IHARDBELOW - inode hardlimit
QUOTA_NL_ISOFTBELOW - inode softlimit
QUOTA_NL_BHARDBELOW - space (block) hardlimit
QUOTA_NL_BSOFTBELOW - space (block) softlimit
QUOTA_NL_A_DEV_MAJOR (u32)
- major number of a device with the affected filesystem
QUOTA_NL_A_DEV_MINOR (u32)

View File

@ -57,7 +57,7 @@ Similarly to JFFS2, UBIFS supports on-the-flight compression which makes
it possible to fit quite a lot of data to the flash.
Similarly to JFFS2, UBIFS is tolerant of unclean reboots and power-cuts.
It does not need stuff like ckfs.ext2. UBIFS automatically replays its
It does not need stuff like fsck.ext2. UBIFS automatically replays its
journal and recovers from crashes, ensuring that the on-flash data
structures are consistent.

View File

@ -1,8 +1,11 @@
Kernel driver ibmaem
======================
This driver talks to the IBM Systems Director Active Energy Manager, known
henceforth as AEM.
Supported systems:
* Any recent IBM System X server with Active Energy Manager support.
* Any recent IBM System X server with AEM support.
This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
x3950 M2, and certain HS2x/LS2x/QS2x blades. The IPMI host interface
driver ("ipmi-si") needs to be loaded for this driver to do anything.
@ -14,24 +17,22 @@ Author: Darrick J. Wong
Description
-----------
This driver implements sensor reading support for the energy and power
meters available on various IBM System X hardware through the BMC. All
sensor banks will be exported as platform devices; this driver can talk
to both v1 and v2 interfaces. This driver is completely separate from the
older ibmpex driver.
This driver implements sensor reading support for the energy and power meters
available on various IBM System X hardware through the BMC. All sensor banks
will be exported as platform devices; this driver can talk to both v1 and v2
interfaces. This driver is completely separate from the older ibmpex driver.
The v1 AEM interface has a simple set of features to monitor energy use.
There is a register that displays an estimate of raw energy consumption
since the last BMC reset, and a power sensor that returns average power
use over a configurable interval.
The v1 AEM interface has a simple set of features to monitor energy use. There
is a register that displays an estimate of raw energy consumption since the
last BMC reset, and a power sensor that returns average power use over a
configurable interval.
The v2 AEM interface is a bit more sophisticated, being able to present
a wider range of energy and power use registers, the power cap as
set by the AEM software, and temperature sensors.
The v2 AEM interface is a bit more sophisticated, being able to present a wider
range of energy and power use registers, the power cap as set by the AEM
software, and temperature sensors.
Special Features
----------------
The "power_cap" value displays the current system power cap, as set by
the Active Energy Manager software. Setting the power cap from the host
is not currently supported.
The "power_cap" value displays the current system power cap, as set by the AEM
software. Setting the power cap from the host is not currently supported.

View File

@ -0,0 +1,8 @@
# kbuild trick to avoid linker error. Can be omitted if a module is built.
obj- := dummy.o
# List of programs to build
hostprogs-y := aliasing-test
# Tell kbuild to always build the programs
always := $(hostprogs-y)

View File

@ -105,7 +105,6 @@ Code Seq# Include File Comments
'T' all linux/soundcard.h conflict!
'T' all asm-i386/ioctls.h conflict!
'U' 00-EF linux/drivers/usb/usb.h
'U' F0-FF drivers/usb/auerswald.c
'V' all linux/vt.h
'W' 00-1F linux/watchdog.h conflict!
'W' 00-1F linux/wanrouter.h conflict!

View File

@ -1447,21 +1447,6 @@ static void configure_device(int fd, const char *tapif, u32 ipaddr)
err(1, "Bringing interface %s up", tapif);
}
static void get_mac(int fd, const char *tapif, unsigned char hwaddr[6])
{
struct ifreq ifr;
memset(&ifr, 0, sizeof(ifr));
strcpy(ifr.ifr_name, tapif);
/* SIOC stands for Socket I/O Control. G means Get (vs S for Set
* above). IF means Interface, and HWADDR is hardware address.
* Simple! */
if (ioctl(fd, SIOCGIFHWADDR, &ifr) != 0)
err(1, "getting hw address for %s", tapif);
memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, 6);
}
static int get_tun_device(char tapif[IFNAMSIZ])
{
struct ifreq ifr;
@ -1531,11 +1516,8 @@ static void setup_tun_net(char *arg)
p = strchr(arg, ':');
if (p) {
str2mac(p+1, conf.mac);
add_feature(dev, VIRTIO_NET_F_MAC);
*p = '\0';
} else {
p = arg + strlen(arg);
/* None supplied; query the randomly assigned mac. */
get_mac(ipfd, tapif, conf.mac);
}
/* arg is now either an IP address or a bridge name */
@ -1547,13 +1529,10 @@ static void setup_tun_net(char *arg)
/* Set up the tun device. */
configure_device(ipfd, tapif, ip);
/* Tell Guest what MAC address to use. */
add_feature(dev, VIRTIO_NET_F_MAC);
add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
/* Expect Guest to handle everything except UFO */
add_feature(dev, VIRTIO_NET_F_CSUM);
add_feature(dev, VIRTIO_NET_F_GUEST_CSUM);
add_feature(dev, VIRTIO_NET_F_MAC);
add_feature(dev, VIRTIO_NET_F_GUEST_TSO4);
add_feature(dev, VIRTIO_NET_F_GUEST_TSO6);
add_feature(dev, VIRTIO_NET_F_GUEST_ECN);

View File

@ -0,0 +1,8 @@
# kbuild trick to avoid linker error. Can be omitted if a module is built.
obj- := dummy.o
# List of programs to build
hostprogs-y := ifenslave
# Tell kbuild to always build the programs
always := $(hostprogs-y)

View File

@ -1081,7 +1081,7 @@ static int set_if_addr(char *master_ifname, char *slave_ifname)
}
ipaddr = ifr.ifr_addr.sa_data;
ipaddr = (unsigned char *)ifr.ifr_addr.sa_data;
v_print("Interface '%s': set IP %s to %d.%d.%d.%d\n",
slave_ifname, ifra[i].desc,
ipaddr[0], ipaddr[1], ipaddr[2], ipaddr[3]);

View File

@ -0,0 +1,10 @@
# kbuild trick to avoid linker error. Can be omitted if a module is built.
obj- := dummy.o
# List of programs to build
hostprogs-y := crc32hash
# Tell kbuild to always build the programs
always := $(hostprogs-y)
HOSTCFLAGS_crc32hash.o += -I$(objtree)/usr/include

View File

@ -26,7 +26,7 @@ int main(int argc, char **argv) {
printf("no string passed as argument\n");
return -1;
}
result = crc32(argv[1], strlen(argv[1]));
result = crc32((unsigned char const *)argv[1], strlen(argv[1]));
printf("0x%x\n", result);
return 0;
}

View File

@ -1144,8 +1144,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
This module supports autoprobe and multiple cards.
Power management is _not_ supported.
Module snd-ice1712
------------------
@ -1628,8 +1626,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
This module supports autoprobe and multiple cards.
Power management is _not_ supported.
Module snd-pcsp
-----------------
@ -2081,13 +2077,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module snd-virtuoso
-------------------
Module for sound cards based on the Asus AV200 chip, i.e.,
Xonar D2 and Xonar D2X.
Module for sound cards based on the Asus AV100/AV200 chips,
i.e., Xonar D1, DX, D2 and D2X.
This module supports autoprobe and multiple cards.
Power management is _not_ supported.
Module snd-vx222
----------------

View File

@ -0,0 +1,11 @@
# kbuild trick to avoid linker error. Can be omitted if a module is built.
obj- := dummy.o
# List of programs to build
hostprogs-y := spidev_test spidev_fdx
# Tell kbuild to always build the programs
always := $(hostprogs-y)
HOSTCFLAGS_spidev_test.o += -I$(objtree)/usr/include
HOSTCFLAGS_spidev_fdx.o += -I$(objtree)/usr/include

View File

@ -1,30 +0,0 @@
Auerswald USB kernel driver
===========================
What is it? What can I do with it?
==================================
The auerswald USB kernel driver connects your linux 2.4.x
system to the auerswald usb-enabled devices.
There are two types of auerswald usb devices:
a) small PBX systems (ISDN)
b) COMfort system telephones (ISDN)
The driver installation creates the devices
/dev/usb/auer0..15. These devices carry a vendor-
specific protocol. You may run all auerswald java
software on it. The java software needs a native
library "libAuerUsbJNINative.so" installed on
your system. This library is available from
auerswald and shipped as part of the java software.
You may create the devices with:
mknod -m 666 /dev/usb/auer0 c 180 112
...
mknod -m 666 /dev/usb/auer15 c 180 127
Future plans
============
- Connection to ISDN4LINUX (the hisax interface)
The maintainer of this driver is wolfgang@iksw-muees.de

View File

@ -436,7 +436,12 @@ post_reset; the USB core guarantees that this is true of internal
suspend/resume events as well.
If a driver wants to block all suspend/resume calls during some
critical section, it can simply acquire udev->pm_mutex.
critical section, it can simply acquire udev->pm_mutex. Note that
calls to resume may be triggered indirectly. Block IO due to memory
allocations can make the vm subsystem resume a device. Thus while
holding this lock you must not allocate memory with GFP_KERNEL or
GFP_NOFS.
Alternatively, if the critical section might call some of the
usb_autopm_* routines, the driver can avoid deadlock by doing:

View File

@ -0,0 +1,8 @@
# kbuild trick to avoid linker error. Can be omitted if a module is built.
obj- := dummy.o
# List of programs to build
hostprogs-y := v4lgrab
# Tell kbuild to always build the programs
always := $(hostprogs-y)

View File

@ -0,0 +1,8 @@
# kbuild trick to avoid linker error. Can be omitted if a module is built.
obj- := dummy.o
# List of programs to build
hostprogs-y := slabinfo
# Tell kbuild to always build the programs
always := $(hostprogs-y)

View File

@ -18,10 +18,11 @@ migrate_pages function call takes two sets of nodes and moves pages of a
process that are located on the from nodes to the destination nodes.
Page migration functions are provided by the numactl package by Andi Kleen
(a version later than 0.9.3 is required. Get it from
ftp://ftp.suse.com/pub/people/ak). numactl provided libnuma which
provides an interface similar to other numa functionality for page migration.
cat /proc/<pid>/numa_maps allows an easy review of where the pages of
a process are located. See also the numa_maps manpage in the numactl package.
ftp://oss.sgi.com/www/projects/libnuma/download/). numactl provides libnuma
which provides an interface similar to other numa functionality for page
migration. cat /proc/<pid>/numa_maps allows an easy review of where the
pages of a process are located. See also the numa_maps documentation in the
proc(5) man page.
Manual migration is useful if for example the scheduler has relocated
a process to a processor on a distant node. A batch scheduler or an

View File

@ -0,0 +1,8 @@
# kbuild trick to avoid linker error. Can be omitted if a module is built.
obj- := dummy.o
# List of programs to build
hostprogs-y := watchdog-simple watchdog-test
# Tell kbuild to always build the programs
always := $(hostprogs-y)

View File

@ -175,12 +175,18 @@ M: bcrl@kvack.org
L: linux-aio@kvack.org
S: Supported
ABIT UGURU HARDWARE MONITOR DRIVER
ABIT UGURU 1,2 HARDWARE MONITOR DRIVER
P: Hans de Goede
M: j.w.r.degoede@hhs.nl
L: lm-sensors@lm-sensors.org
S: Maintained
ABIT UGURU 3 HARDWARE MONITOR DRIVER
P: Alistair John Strachan
M: alistair@devzero.co.uk
L: lm-sensors@lm-sensors.org
S: Maintained
ACENIC DRIVER
P: Jes Sorensen
M: jes@trained-monkey.org
@ -2462,7 +2468,7 @@ L: kernel-janitors@vger.kernel.org
W: http://www.kerneljanitors.org/
S: Maintained
KERNEL NFSD
KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
P: J. Bruce Fields
M: bfields@fieldses.org
P: Neil Brown
@ -2928,6 +2934,12 @@ M: jirislaby@gmail.com
L: linux-kernel@vger.kernel.org
S: Maintained
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
P: Felipe Balbi
M: felipe.balbi@nokia.com
L: linux-usb@vger.kernel.org
S: Maintained
MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
P: Andrew Gallatin
M: gallatin@myri.com
@ -3076,9 +3088,10 @@ M: horms@verge.net.au
P: Julian Anastasov
M: ja@ssi.bg
L: netdev@vger.kernel.org
L: lvs-devel@vger.kernel.org
S: Maintained
NFS CLIENT
NFS, SUNRPC, AND LOCKD CLIENTS
P: Trond Myklebust
M: Trond.Myklebust@netapp.com
L: linux-nfs@vger.kernel.org
@ -3741,6 +3754,16 @@ L: linux-visws-devel@lists.sf.net
W: http://linux-visws.sf.net
S: Maintained for 2.6.
SGI GRU DRIVER
P: Jack Steiner
M: steiner@sgi.com
S: Maintained
SGI XP/XPC/XPNET DRIVER
P: Dean Nelson
M: dcn@sgi.com
S: Maintained
SIMTEC EB110ATX (Chalice CATS)
P: Ben Dooks
P: Vincent Sanders
@ -4195,12 +4218,6 @@ M: oliver@neukum.name
L: linux-usb@vger.kernel.org
S: Maintained
USB AUERSWALD DRIVER
P: Wolfgang Muees
M: wolfgang@iksw-muees.de
L: linux-usb@vger.kernel.org
S: Maintained
USB BLOCK DRIVER (UB ub)
P: Pete Zaitcev
M: zaitcev@redhat.com

View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 27
EXTRAVERSION = -rc2
EXTRAVERSION = -rc3
NAME = Rotary Wombat
# *DOCUMENTATION*
@ -821,6 +821,9 @@ ifdef CONFIG_HEADERS_CHECK
endif
ifdef CONFIG_SAMPLES
$(Q)$(MAKE) $(build)=samples
endif
ifdef CONFIG_BUILD_DOCSRC
$(Q)$(MAKE) $(build)=Documentation
endif
$(call vmlinux-modpost)
$(call if_changed_rule,vmlinux__)
@ -1166,7 +1169,7 @@ MRPROPER_FILES += .config .config.old include/asm .version .old_version \
#
clean: rm-dirs := $(CLEAN_DIRS)
clean: rm-files := $(CLEAN_FILES)
clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs))
clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs) Documentation)
PHONY += $(clean-dirs) clean archclean
$(clean-dirs):

Some files were not shown because too many files have changed in this diff Show More