omap2: Initialize Menelaus and MMC for N8X0

Initialize MMC for N8X0

Based on an earlier patches from Nokia released kernel
sources at:

http://repository.maemo.org/pool/os2008/free/source/k/kernel-source-rx-34/

Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Tony Lindgren 2010-02-26 15:31:12 -08:00
parent 7b97f3edf3
commit 9418c65f9b

View File

@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/stddef.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
@ -25,11 +26,17 @@
#include <plat/board.h>
#include <plat/common.h>
#include <plat/menelaus.h>
#include <mach/irqs.h>
#include <plat/mcspi.h>
#include <plat/onenand.h>
#include <plat/mmc.h>
#include <plat/serial.h>
static int slot1_cover_open;
static int slot2_cover_open;
static struct device *mmc_device;
static struct omap2_mcspi_device_config p54spi_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1,
@ -96,6 +103,442 @@ static void __init n8x0_onenand_init(void) {}
#endif
#if defined(CONFIG_MENELAUS) && \
(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE))
/*
* On both N800 and N810, only the first of the two MMC controllers is in use.
* The two MMC slots are multiplexed via Menelaus companion chip over I2C.
* On N800, both slots are powered via Menelaus. On N810, only one of the
* slots is powered via Menelaus. The N810 EMMC is powered via GPIO.
*
* VMMC slot 1 on both N800 and N810
* VDCDC3_APE and VMCS2_APE slot 2 on N800
* GPIO23 and GPIO9 slot 2 EMMC on N810
*
*/
#define N8X0_SLOT_SWITCH_GPIO 96
#define N810_EMMC_VSD_GPIO 23
#define NN810_EMMC_VIO_GPIO 9
static int n8x0_mmc_switch_slot(struct device *dev, int slot)
{
#ifdef CONFIG_MMC_DEBUG
dev_dbg(dev, "Choose slot %d\n", slot + 1);
#endif
gpio_set_value(N8X0_SLOT_SWITCH_GPIO, slot);
return 0;
}
static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
int power_on, int vdd)
{
int mV;
#ifdef CONFIG_MMC_DEBUG
dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
power_on ? "on" : "off", vdd);
#endif
if (slot == 0) {
if (!power_on)
return menelaus_set_vmmc(0);
switch (1 << vdd) {
case MMC_VDD_33_34:
case MMC_VDD_32_33:
case MMC_VDD_31_32:
mV = 3100;
break;
case MMC_VDD_30_31:
mV = 3000;
break;
case MMC_VDD_28_29:
mV = 2800;
break;
case MMC_VDD_165_195:
mV = 1850;
break;
default:
BUG();
}
return menelaus_set_vmmc(mV);
} else {
if (!power_on)
return menelaus_set_vdcdc(3, 0);
switch (1 << vdd) {
case MMC_VDD_33_34:
case MMC_VDD_32_33:
mV = 3300;
break;
case MMC_VDD_30_31:
case MMC_VDD_29_30:
mV = 3000;
break;
case MMC_VDD_28_29:
case MMC_VDD_27_28:
mV = 2800;
break;
case MMC_VDD_24_25:
case MMC_VDD_23_24:
mV = 2400;
break;
case MMC_VDD_22_23:
case MMC_VDD_21_22:
mV = 2200;
break;
case MMC_VDD_20_21:
mV = 2000;
break;
case MMC_VDD_165_195:
mV = 1800;
break;
default:
BUG();
}
return menelaus_set_vdcdc(3, mV);
}
return 0;
}
static void n810_set_power_emmc(struct device *dev,
int power_on)
{
dev_dbg(dev, "Set EMMC power %s\n", power_on ? "on" : "off");
if (power_on) {
gpio_set_value(N810_EMMC_VSD_GPIO, 1);
msleep(1);
gpio_set_value(NN810_EMMC_VIO_GPIO, 1);
msleep(1);
} else {
gpio_set_value(NN810_EMMC_VIO_GPIO, 0);
msleep(50);
gpio_set_value(N810_EMMC_VSD_GPIO, 0);
msleep(50);
}
}
static int n8x0_mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
if (machine_is_nokia_n800() || slot == 0)
return n8x0_mmc_set_power_menelaus(dev, slot, power_on, vdd);
n810_set_power_emmc(dev, power_on);
return 0;
}
static int n8x0_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
{
int r;
dev_dbg(dev, "Set slot %d bus mode %s\n", slot + 1,
bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
BUG_ON(slot != 0 && slot != 1);
slot++;
switch (bus_mode) {
case MMC_BUSMODE_OPENDRAIN:
r = menelaus_set_mmc_opendrain(slot, 1);
break;
case MMC_BUSMODE_PUSHPULL:
r = menelaus_set_mmc_opendrain(slot, 0);
break;
default:
BUG();
}
if (r != 0 && printk_ratelimit())
dev_err(dev, "MMC: unable to set bus mode for slot %d\n",
slot);
return r;
}
static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
{
slot++;
BUG_ON(slot != 1 && slot != 2);
if (slot == 1)
return slot1_cover_open;
else
return slot2_cover_open;
}
static void n8x0_mmc_callback(void *data, u8 card_mask)
{
int bit, *openp, index;
if (machine_is_nokia_n800()) {
bit = 1 << 1;
openp = &slot2_cover_open;
index = 1;
} else {
bit = 1;
openp = &slot1_cover_open;
index = 0;
}
if (card_mask & bit)
*openp = 1;
else
*openp = 0;
omap_mmc_notify_cover_event(mmc_device, index, *openp);
}
void n8x0_mmc_slot1_cover_handler(void *arg, int closed_state)
{
if (mmc_device == NULL)
return;
slot1_cover_open = !closed_state;
omap_mmc_notify_cover_event(mmc_device, 0, closed_state);
}
static int n8x0_mmc_late_init(struct device *dev)
{
int r, bit, *openp;
int vs2sel;
mmc_device = dev;
r = menelaus_set_slot_sel(1);
if (r < 0)
return r;
if (machine_is_nokia_n800())
vs2sel = 0;
else
vs2sel = 2;
r = menelaus_set_mmc_slot(2, 0, vs2sel, 1);
if (r < 0)
return r;
n8x0_mmc_set_power(dev, 0, MMC_POWER_ON, 16); /* MMC_VDD_28_29 */
n8x0_mmc_set_power(dev, 1, MMC_POWER_ON, 16);
r = menelaus_set_mmc_slot(1, 1, 0, 1);
if (r < 0)
return r;
r = menelaus_set_mmc_slot(2, 1, vs2sel, 1);
if (r < 0)
return r;
r = menelaus_get_slot_pin_states();
if (r < 0)
return r;
if (machine_is_nokia_n800()) {
bit = 1 << 1;
openp = &slot2_cover_open;
} else {
bit = 1;
openp = &slot1_cover_open;
slot2_cover_open = 0;
}
/* All slot pin bits seem to be inversed until first switch change */
if (r == 0xf || r == (0xf & ~bit))
r = ~r;
if (r & bit)
*openp = 1;
else
*openp = 0;
r = menelaus_register_mmc_callback(n8x0_mmc_callback, NULL);
return r;
}
static void n8x0_mmc_shutdown(struct device *dev)
{
int vs2sel;
if (machine_is_nokia_n800())
vs2sel = 0;
else
vs2sel = 2;
menelaus_set_mmc_slot(1, 0, 0, 0);
menelaus_set_mmc_slot(2, 0, vs2sel, 0);
}
static void n8x0_mmc_cleanup(struct device *dev)
{
menelaus_unregister_mmc_callback();
gpio_free(N8X0_SLOT_SWITCH_GPIO);
if (machine_is_nokia_n810()) {
gpio_free(N810_EMMC_VSD_GPIO);
gpio_free(NN810_EMMC_VIO_GPIO);
}
}
/*
* MMC controller1 has two slots that are multiplexed via I2C.
* MMC controller2 is not in use.
*/
static struct omap_mmc_platform_data mmc1_data = {
.nr_slots = 2,
.switch_slot = n8x0_mmc_switch_slot,
.init = n8x0_mmc_late_init,
.cleanup = n8x0_mmc_cleanup,
.shutdown = n8x0_mmc_shutdown,
.max_freq = 24000000,
.dma_mask = 0xffffffff,
.slots[0] = {
.wires = 4,
.set_power = n8x0_mmc_set_power,
.set_bus_mode = n8x0_mmc_set_bus_mode,
.get_cover_state = n8x0_mmc_get_cover_state,
.ocr_mask = MMC_VDD_165_195 | MMC_VDD_30_31 |
MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "internal",
},
.slots[1] = {
.set_power = n8x0_mmc_set_power,
.set_bus_mode = n8x0_mmc_set_bus_mode,
.get_cover_state = n8x0_mmc_get_cover_state,
.ocr_mask = MMC_VDD_165_195 | MMC_VDD_20_21 |
MMC_VDD_21_22 | MMC_VDD_22_23 |
MMC_VDD_23_24 | MMC_VDD_24_25 |
MMC_VDD_27_28 | MMC_VDD_28_29 |
MMC_VDD_29_30 | MMC_VDD_30_31 |
MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "external",
},
};
static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
void __init n8x0_mmc_init(void)
{
int err;
if (machine_is_nokia_n810()) {
mmc1_data.slots[0].name = "external";
/*
* Some Samsung Movinand chips do not like open-ended
* multi-block reads and fall to braind-dead state
* while doing so. Reducing the number of blocks in
* the transfer or delays in clock disable do not help
*/
mmc1_data.slots[1].name = "internal";
mmc1_data.slots[1].ban_openended = 1;
}
err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch");
if (err)
return err;
gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0);
if (machine_is_nokia_n810()) {
err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf");
if (err) {
gpio_free(N8X0_SLOT_SWITCH_GPIO);
return err;
}
gpio_direction_output(N810_EMMC_VSD_GPIO, 0);
err = gpio_request(NN810_EMMC_VIO_GPIO, "MMC slot 2 Vdd");
if (err) {
gpio_free(N8X0_SLOT_SWITCH_GPIO);
gpio_free(N810_EMMC_VSD_GPIO);
return err;
}
gpio_direction_output(NN810_EMMC_VIO_GPIO, 0);
}
mmc_data[0] = &mmc1_data;
omap2_init_mmc(mmc_data, OMAP24XX_NR_MMC);
}
#else
void __init n8x0_mmc_init(void)
{
}
void n8x0_mmc_slot1_cover_handler(void *arg, int state)
{
}
#endif /* CONFIG_MMC_OMAP */
#ifdef CONFIG_MENELAUS
static int n8x0_auto_sleep_regulators(void)
{
u32 val;
int ret;
val = EN_VPLL_SLEEP | EN_VMMC_SLEEP \
| EN_VAUX_SLEEP | EN_VIO_SLEEP \
| EN_VMEM_SLEEP | EN_DC3_SLEEP \
| EN_VC_SLEEP | EN_DC2_SLEEP;
ret = menelaus_set_regulator_sleep(1, val);
if (ret < 0) {
printk(KERN_ERR "Could not set regulators to sleep on "
"menelaus: %u\n", ret);
return ret;
}
return 0;
}
static int n8x0_auto_voltage_scale(void)
{
int ret;
ret = menelaus_set_vcore_hw(1400, 1050);
if (ret < 0) {
printk(KERN_ERR "Could not set VCORE voltage on "
"menelaus: %u\n", ret);
return ret;
}
return 0;
}
static int n8x0_menelaus_late_init(struct device *dev)
{
int ret;
ret = n8x0_auto_voltage_scale();
if (ret < 0)
return ret;
ret = n8x0_auto_sleep_regulators();
if (ret < 0)
return ret;
return 0;
}
static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] = {
{
I2C_BOARD_INFO("menelaus", 0x72),
.irq = INT_24XX_SYS_NIRQ,
},
};
static struct menelaus_platform_data n8x0_menelaus_platform_data = {
.late_init = n8x0_menelaus_late_init,
};
static void __init n8x0_menelaus_init(void)
{
n8x0_i2c_board_info_1[0].platform_data = &n8x0_menelaus_platform_data;
omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
ARRAY_SIZE(n8x0_i2c_board_info_1));
}
#else
static inline void __init n8x0_menelaus_init(void)
{
}
#endif
static void __init n8x0_map_io(void)
{
omap2_set_globals_242x();
@ -116,7 +559,9 @@ static void __init n8x0_init_machine(void)
ARRAY_SIZE(n800_spi_board_info));
omap_serial_init();
n8x0_menelaus_init();
n8x0_onenand_init();
n8x0_mmc_init();
}
MACHINE_START(NOKIA_N800, "Nokia N800")