igb: move SRRCTL register configuration into ring specific config

The SRRCTL register exists per ring.  Instead of configuring all of them in
the RCTL configuration which is meant to be global it makes more sense to move
this out into the ring specific configuration.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Alexander Duyck 2009-10-27 15:51:07 +00:00 committed by David S. Miller
parent 6ec43fe635
commit 952f72a8ce

View File

@ -2230,8 +2230,6 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
u32 rctl;
u32 srrctl = 0;
int i;
rctl = rd32(E1000_RCTL);
@ -2256,31 +2254,8 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
/* enable LPE to prevent packets larger than max_frame_size */
rctl |= E1000_RCTL_LPE;
/* 82575 and greater support packet-split where the protocol
* header is placed in skb->data and the packet data is
* placed in pages hanging off of skb_shinfo(skb)->nr_frags.
* In the case of a non-split, skb->data is linearly filled,
* followed by the page buffers. Therefore, skb->data is
* sized to hold the largest protocol header.
*/
/* allocations using alloc_page take too long for regular MTU
* so only enable packet split for jumbo frames */
if (adapter->rx_buffer_len < IGB_RXBUFFER_1024) {
srrctl = ALIGN(adapter->rx_buffer_len, 64) <<
E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
#if (PAGE_SIZE / 2) > IGB_RXBUFFER_16384
srrctl |= IGB_RXBUFFER_16384 >>
E1000_SRRCTL_BSIZEPKT_SHIFT;
#else
srrctl |= (PAGE_SIZE / 2) >>
E1000_SRRCTL_BSIZEPKT_SHIFT;
#endif
srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
} else {
srrctl = ALIGN(adapter->rx_buffer_len, 1024) >>
E1000_SRRCTL_BSIZEPKT_SHIFT;
srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
}
/* disable queue 0 to prevent tail write w/o re-config */
wr32(E1000_RXDCTL(0), 0);
/* Attention!!! For SR-IOV PF driver operations you must enable
* queue drop for all VF and PF queues to prevent head of line blocking
@ -2291,10 +2266,6 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
/* set all queue drop enable bits */
wr32(E1000_QDE, ALL_QUEUES);
srrctl |= E1000_SRRCTL_DROP_EN;
/* disable queue 0 to prevent tail write w/o re-config */
wr32(E1000_RXDCTL(0), 0);
vmolr = rd32(E1000_VMOLR(adapter->vfs_allocated_count));
if (rctl & E1000_RCTL_LPE)
@ -2304,11 +2275,6 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
wr32(E1000_VMOLR(adapter->vfs_allocated_count), vmolr);
}
for (i = 0; i < adapter->num_rx_queues; i++) {
int j = adapter->rx_ring[i].reg_idx;
wr32(E1000_SRRCTL(j), srrctl);
}
wr32(E1000_RCTL, rctl);
}
@ -2373,7 +2339,7 @@ static void igb_configure_rx_ring(struct igb_adapter *adapter,
struct e1000_hw *hw = &adapter->hw;
u64 rdba = ring->dma;
int reg_idx = ring->reg_idx;
u32 rxdctl;
u32 srrctl, rxdctl;
/* disable the queue */
rxdctl = rd32(E1000_RXDCTL(reg_idx));
@ -2393,6 +2359,26 @@ static void igb_configure_rx_ring(struct igb_adapter *adapter,
writel(0, hw->hw_addr + ring->head);
writel(0, hw->hw_addr + ring->tail);
/* set descriptor configuration */
if (adapter->rx_buffer_len < IGB_RXBUFFER_1024) {
srrctl = ALIGN(adapter->rx_buffer_len, 64) <<
E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
#if (PAGE_SIZE / 2) > IGB_RXBUFFER_16384
srrctl |= IGB_RXBUFFER_16384 >>
E1000_SRRCTL_BSIZEPKT_SHIFT;
#else
srrctl |= (PAGE_SIZE / 2) >>
E1000_SRRCTL_BSIZEPKT_SHIFT;
#endif
srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
} else {
srrctl = ALIGN(adapter->rx_buffer_len, 1024) >>
E1000_SRRCTL_BSIZEPKT_SHIFT;
srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
}
wr32(E1000_SRRCTL(reg_idx), srrctl);
/* enable receive descriptor fetching */
rxdctl = rd32(E1000_RXDCTL(reg_idx));
rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;