b43: Add more N-PHY init code

This also adds lots of TODOs. Oh well. Lots of work. :)

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Michael Buesch 2008-01-18 01:09:25 +01:00 committed by David S. Miller
parent c09c7237ea
commit 95b66bad55
2 changed files with 320 additions and 24 deletions

View File

@ -29,6 +29,8 @@
#include "nphy.h"
#include "tables_nphy.h"
#include <linux/delay.h>
void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna)
{//TODO
@ -191,9 +193,297 @@ void b43_nphy_radio_turn_off(struct b43_wldev *dev)
~B43_NPHY_RFCTL_CMD_EN);
}
#define ntab_upload(dev, offset, data) do { \
unsigned int i; \
for (i = 0; i < (offset##_SIZE); i++) \
b43_ntab_write(dev, (offset) + i, (data)[i]); \
} while (0)
/* Upload the N-PHY tables. */
static void b43_nphy_tables_init(struct b43_wldev *dev)
{
/* Static tables */
ntab_upload(dev, B43_NTAB_FRAMESTRUCT, b43_ntab_framestruct);
ntab_upload(dev, B43_NTAB_FRAMELT, b43_ntab_framelookup);
ntab_upload(dev, B43_NTAB_TMAP, b43_ntab_tmap);
ntab_upload(dev, B43_NTAB_TDTRN, b43_ntab_tdtrn);
ntab_upload(dev, B43_NTAB_INTLEVEL, b43_ntab_intlevel);
ntab_upload(dev, B43_NTAB_PILOT, b43_ntab_pilot);
ntab_upload(dev, B43_NTAB_PILOTLT, b43_ntab_pilotlt);
ntab_upload(dev, B43_NTAB_TDI20A0, b43_ntab_tdi20a0);
ntab_upload(dev, B43_NTAB_TDI20A1, b43_ntab_tdi20a1);
ntab_upload(dev, B43_NTAB_TDI40A0, b43_ntab_tdi40a0);
ntab_upload(dev, B43_NTAB_TDI40A1, b43_ntab_tdi40a1);
ntab_upload(dev, B43_NTAB_BDI, b43_ntab_bdi);
ntab_upload(dev, B43_NTAB_CHANEST, b43_ntab_channelest);
ntab_upload(dev, B43_NTAB_MCS, b43_ntab_mcs);
/* Volatile tables */
ntab_upload(dev, B43_NTAB_NOISEVAR10, b43_ntab_noisevar10);
ntab_upload(dev, B43_NTAB_NOISEVAR11, b43_ntab_noisevar11);
ntab_upload(dev, B43_NTAB_C0_ESTPLT, b43_ntab_estimatepowerlt0);
ntab_upload(dev, B43_NTAB_C1_ESTPLT, b43_ntab_estimatepowerlt1);
ntab_upload(dev, B43_NTAB_C0_ADJPLT, b43_ntab_adjustpower0);
ntab_upload(dev, B43_NTAB_C1_ADJPLT, b43_ntab_adjustpower1);
ntab_upload(dev, B43_NTAB_C0_GAINCTL, b43_ntab_gainctl0);
ntab_upload(dev, B43_NTAB_C1_GAINCTL, b43_ntab_gainctl1);
ntab_upload(dev, B43_NTAB_C0_IQLT, b43_ntab_iqlt0);
ntab_upload(dev, B43_NTAB_C1_IQLT, b43_ntab_iqlt1);
ntab_upload(dev, B43_NTAB_C0_LOFEEDTH, b43_ntab_loftlt0);
ntab_upload(dev, B43_NTAB_C1_LOFEEDTH, b43_ntab_loftlt1);
}
static void b43_nphy_workarounds(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
unsigned int i;
b43_phy_set(dev, B43_NPHY_IQFLIP,
B43_NPHY_IQFLIP_ADC1 | B43_NPHY_IQFLIP_ADC2);
//FIXME the following condition is different in the specs.
if (1 /* FIXME band is 2.4GHz */) {
b43_phy_set(dev, B43_NPHY_CLASSCTL,
B43_NPHY_CLASSCTL_CCKEN);
} else {
b43_phy_mask(dev, B43_NPHY_CLASSCTL,
~B43_NPHY_CLASSCTL_CCKEN);
}
b43_radio_set(dev, B2055_C1_TX_RF_SPARE, 0x8);
b43_phy_write(dev, B43_NPHY_TXFRAMEDELAY, 8);
/* Fixup some tables */
b43_ntab_write(dev, B43_NTAB16(8, 0x00), 0xA);
b43_ntab_write(dev, B43_NTAB16(8, 0x10), 0xA);
b43_ntab_write(dev, B43_NTAB16(8, 0x02), 0xCDAA);
b43_ntab_write(dev, B43_NTAB16(8, 0x12), 0xCDAA);
b43_ntab_write(dev, B43_NTAB16(8, 0x08), 0);
b43_ntab_write(dev, B43_NTAB16(8, 0x18), 0);
b43_ntab_write(dev, B43_NTAB16(8, 0x07), 0x7AAB);
b43_ntab_write(dev, B43_NTAB16(8, 0x17), 0x7AAB);
b43_ntab_write(dev, B43_NTAB16(8, 0x06), 0x800);
b43_ntab_write(dev, B43_NTAB16(8, 0x16), 0x800);
b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO1, 0x2D8);
b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP1, 0x301);
b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO2, 0x2D8);
b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2, 0x301);
//TODO set RF sequence
/* Set narrowband clip threshold */
b43_phy_write(dev, B43_NPHY_C1_NBCLIPTHRES, 66);
b43_phy_write(dev, B43_NPHY_C2_NBCLIPTHRES, 66);
/* Set wideband clip 2 threshold */
b43_phy_maskset(dev, B43_NPHY_C1_CLIPWBTHRES,
~B43_NPHY_C1_CLIPWBTHRES_CLIP2,
21 << B43_NPHY_C1_CLIPWBTHRES_CLIP2_SHIFT);
b43_phy_maskset(dev, B43_NPHY_C2_CLIPWBTHRES,
~B43_NPHY_C2_CLIPWBTHRES_CLIP2,
21 << B43_NPHY_C2_CLIPWBTHRES_CLIP2_SHIFT);
/* Set Clip 2 detect */
b43_phy_set(dev, B43_NPHY_C1_CGAINI,
B43_NPHY_C1_CGAINI_CL2DETECT);
b43_phy_set(dev, B43_NPHY_C2_CGAINI,
B43_NPHY_C2_CGAINI_CL2DETECT);
if (0 /*FIXME*/) {
/* Set dwell lengths */
b43_phy_write(dev, B43_NPHY_CLIP1_NBDWELL_LEN, 43);
b43_phy_write(dev, B43_NPHY_CLIP2_NBDWELL_LEN, 43);
b43_phy_write(dev, B43_NPHY_W1CLIP1_DWELL_LEN, 9);
b43_phy_write(dev, B43_NPHY_W1CLIP2_DWELL_LEN, 9);
/* Set gain backoff */
b43_phy_maskset(dev, B43_NPHY_C1_CGAINI,
~B43_NPHY_C1_CGAINI_GAINBKOFF,
1 << B43_NPHY_C1_CGAINI_GAINBKOFF_SHIFT);
b43_phy_maskset(dev, B43_NPHY_C2_CGAINI,
~B43_NPHY_C2_CGAINI_GAINBKOFF,
1 << B43_NPHY_C2_CGAINI_GAINBKOFF_SHIFT);
/* Set HPVGA2 index */
b43_phy_maskset(dev, B43_NPHY_C1_INITGAIN,
~B43_NPHY_C1_INITGAIN_HPVGA2,
6 << B43_NPHY_C1_INITGAIN_HPVGA2_SHIFT);
b43_phy_maskset(dev, B43_NPHY_C2_INITGAIN,
~B43_NPHY_C2_INITGAIN_HPVGA2,
6 << B43_NPHY_C2_INITGAIN_HPVGA2_SHIFT);
//FIXME verify that the specs really mean to use autoinc here.
for (i = 0; i < 3; i++)
b43_ntab_write(dev, B43_NTAB16(7, 0x106) + i, 0x673);
}
/* Set minimum gain value */
b43_phy_maskset(dev, B43_NPHY_C1_MINMAX_GAIN,
~B43_NPHY_C1_MINGAIN,
23 << B43_NPHY_C1_MINGAIN_SHIFT);
b43_phy_maskset(dev, B43_NPHY_C2_MINMAX_GAIN,
~B43_NPHY_C2_MINGAIN,
23 << B43_NPHY_C2_MINGAIN_SHIFT);
if (phy->rev < 2) {
b43_phy_mask(dev, B43_NPHY_SCRAM_SIGCTL,
~B43_NPHY_SCRAM_SIGCTL_SCM);
}
/* Set phase track alpha and beta */
b43_phy_write(dev, B43_NPHY_PHASETR_A0, 0x125);
b43_phy_write(dev, B43_NPHY_PHASETR_A1, 0x1B3);
b43_phy_write(dev, B43_NPHY_PHASETR_A2, 0x105);
b43_phy_write(dev, B43_NPHY_PHASETR_B0, 0x16E);
b43_phy_write(dev, B43_NPHY_PHASETR_B1, 0xCD);
b43_phy_write(dev, B43_NPHY_PHASETR_B2, 0x20);
}
static void b43_nphy_reset_cca(struct b43_wldev *dev)
{
u16 bbcfg;
ssb_write32(dev->dev, SSB_TMSLOW,
ssb_read32(dev->dev, SSB_TMSLOW) | SSB_TMSLOW_FGC);
bbcfg = b43_phy_read(dev, B43_NPHY_BBCFG);
b43_phy_set(dev, B43_NPHY_BBCFG, B43_NPHY_BBCFG_RSTCCA);
b43_phy_write(dev, B43_NPHY_BBCFG,
bbcfg & ~B43_NPHY_BBCFG_RSTCCA);
ssb_write32(dev->dev, SSB_TMSLOW,
ssb_read32(dev->dev, SSB_TMSLOW) & ~SSB_TMSLOW_FGC);
}
enum b43_nphy_rf_sequence {
B43_RFSEQ_RX2TX,
B43_RFSEQ_TX2RX,
B43_RFSEQ_RESET2RX,
B43_RFSEQ_UPDATE_GAINH,
B43_RFSEQ_UPDATE_GAINL,
B43_RFSEQ_UPDATE_GAINU,
};
static void b43_nphy_force_rf_sequence(struct b43_wldev *dev,
enum b43_nphy_rf_sequence seq)
{
static const u16 trigger[] = {
[B43_RFSEQ_RX2TX] = B43_NPHY_RFSEQTR_RX2TX,
[B43_RFSEQ_TX2RX] = B43_NPHY_RFSEQTR_TX2RX,
[B43_RFSEQ_RESET2RX] = B43_NPHY_RFSEQTR_RST2RX,
[B43_RFSEQ_UPDATE_GAINH] = B43_NPHY_RFSEQTR_UPGH,
[B43_RFSEQ_UPDATE_GAINL] = B43_NPHY_RFSEQTR_UPGL,
[B43_RFSEQ_UPDATE_GAINU] = B43_NPHY_RFSEQTR_UPGU,
};
int i;
B43_WARN_ON(seq >= ARRAY_SIZE(trigger));
b43_phy_set(dev, B43_NPHY_RFSEQMODE,
B43_NPHY_RFSEQMODE_CAOVER | B43_NPHY_RFSEQMODE_TROVER);
b43_phy_set(dev, B43_NPHY_RFSEQTR, trigger[seq]);
for (i = 0; i < 200; i++) {
if (!(b43_phy_read(dev, B43_NPHY_RFSEQST) & trigger[seq]))
goto ok;
msleep(1);
}
b43err(dev->wl, "RF sequence status timeout\n");
ok:
b43_phy_mask(dev, B43_NPHY_RFSEQMODE,
~(B43_NPHY_RFSEQMODE_CAOVER | B43_NPHY_RFSEQMODE_TROVER));
}
static void b43_nphy_bphy_init(struct b43_wldev *dev)
{
unsigned int i;
u16 val;
val = 0x1E1F;
for (i = 0; i < 14; i++) {
b43_phy_write(dev, B43_PHY_N_BMODE(0x88 + i), val);
val -= 0x202;
}
val = 0x3E3F;
for (i = 0; i < 16; i++) {
b43_phy_write(dev, B43_PHY_N_BMODE(0x97 + i), val);
val -= 0x202;
}
b43_phy_write(dev, B43_PHY_N_BMODE(0x38), 0x668);
}
/* RSSI Calibration */
static void b43_nphy_rssi_cal(struct b43_wldev *dev, u8 type)
{
//TODO
}
int b43_phy_initn(struct b43_wldev *dev)
{
b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n");
struct b43_phy *phy = &dev->phy;
u16 tmp;
//TODO: Spectral management
b43_nphy_tables_init(dev);
/* Clear all overrides */
b43_phy_write(dev, B43_NPHY_RFCTL_OVER, 0);
b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, 0);
b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, 0);
b43_phy_write(dev, B43_NPHY_RFCTL_INTC3, 0);
b43_phy_write(dev, B43_NPHY_RFCTL_INTC4, 0);
b43_phy_mask(dev, B43_NPHY_RFSEQMODE,
~(B43_NPHY_RFSEQMODE_CAOVER |
B43_NPHY_RFSEQMODE_TROVER));
b43_phy_write(dev, B43_NPHY_AFECTL_OVER, 0);
tmp = (phy->rev < 2) ? 64 : 59;
b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3,
~B43_NPHY_BPHY_CTL3_SCALE,
tmp << B43_NPHY_BPHY_CTL3_SCALE_SHIFT);
b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_20M, 0x20);
b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_40M, 0x20);
b43_phy_write(dev, B43_NPHY_TXREALFD, 184);
b43_phy_write(dev, B43_NPHY_MIMO_CRSTXEXT, 200);
b43_phy_write(dev, B43_NPHY_PLOAD_CSENSE_EXTLEN, 80);
b43_phy_write(dev, B43_NPHY_C2_BCLIPBKOFF, 511);
//TODO MIMO-Config
//TODO Update TX/RX chain
if (phy->rev < 2) {
b43_phy_write(dev, B43_NPHY_DUP40_GFBL, 0xAA8);
b43_phy_write(dev, B43_NPHY_DUP40_BL, 0x9A4);
}
b43_nphy_workarounds(dev);
b43_nphy_reset_cca(dev);
ssb_write32(dev->dev, SSB_TMSLOW,
ssb_read32(dev->dev, SSB_TMSLOW) | B43_TMSLOW_MACPHYCLKEN);
b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RX2TX);
b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
b43_phy_read(dev, B43_NPHY_CLASSCTL); /* dummy read */
//TODO read core1/2 clip1 thres regs
if (1 /* FIXME Band is 2.4GHz */)
b43_nphy_bphy_init(dev);
//TODO disable TX power control
//TODO Fix the TX power settings
//TODO Init periodic calibration with reason 3
b43_nphy_rssi_cal(dev, 2);
b43_nphy_rssi_cal(dev, 0);
b43_nphy_rssi_cal(dev, 1);
//TODO get TX gain
//TODO init superswitch
//TODO calibrate LO
//TODO idle TSSI TX pctl
//TODO TX power control power setup
//TODO table writes
//TODO TX power control coefficients
//TODO enable TX power control
//TODO control antenna selection
//TODO init radar detection
//TODO reset channel if changed
b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n");
return 0;
}

View File

@ -25,8 +25,11 @@
#define B43_NPHY_C1_CCK_BCLIPBKOFF B43_PHY_N(0x01B) /* Core 1 CCK barely clip backoff */
#define B43_NPHY_C1_CGAINI B43_PHY_N(0x01C) /* Core 1 compute gain info */
#define B43_NPHY_C1_CGAINI_GAINBKOFF 0x001F /* Gain backoff */
#define B43_NPHY_C1_CGAINI_GAINBKOFF_SHIFT 0
#define B43_NPHY_C1_CGAINI_CLIPGBKOFF 0x03E0 /* Clip gain backoff */
#define B43_NPHY_C1_CGAINI_CLIPGBKOFF_SHIFT 5
#define B43_NPHY_C1_CGAINI_GAINSTEP 0x1C00 /* Gain step */
#define B43_NPHY_C1_CGAINI_GAINSTEP_SHIFT 10
#define B43_NPHY_C1_CGAINI_CL2DETECT 0x2000 /* Clip 2 detect mask */
#define B43_NPHY_C1_CCK_CGAINI B43_PHY_N(0x01D) /* Core 1 CCK compute gain info */
#define B43_NPHY_C1_CCK_CGAINI_GAINBKOFF 0x001F /* Gain backoff */
@ -69,29 +72,32 @@
#define B43_NPHY_C1_CLIP1THRES B43_PHY_N(0x02C) /* Core 1 clip1 threshold */
#define B43_NPHY_C1_CLIP2THRES B43_PHY_N(0x02D) /* Core 1 clip2 threshold */
#define B43_NPHY_C2_DESPWR B43_PHY_N(0x018 + 22) /* Core 2 desired power */
#define B43_NPHY_C2_CCK_DESPWR B43_PHY_N(0x019 + 22) /* Core 2 CCK desired power */
#define B43_NPHY_C2_BCLIPBKOFF B43_PHY_N(0x01A + 22) /* Core 2 barely clip backoff */
#define B43_NPHY_C2_CCK_BCLIPBKOFF B43_PHY_N(0x01B + 22) /* Core 2 CCK barely clip backoff */
#define B43_NPHY_C2_CGAINI B43_PHY_N(0x01C + 22) /* Core 2 compute gain info */
#define B43_NPHY_C2_DESPWR B43_PHY_N(0x02E) /* Core 2 desired power */
#define B43_NPHY_C2_CCK_DESPWR B43_PHY_N(0x02F) /* Core 2 CCK desired power */
#define B43_NPHY_C2_BCLIPBKOFF B43_PHY_N(0x030) /* Core 2 barely clip backoff */
#define B43_NPHY_C2_CCK_BCLIPBKOFF B43_PHY_N(0x031) /* Core 2 CCK barely clip backoff */
#define B43_NPHY_C2_CGAINI B43_PHY_N(0x032) /* Core 2 compute gain info */
#define B43_NPHY_C2_CGAINI_GAINBKOFF 0x001F /* Gain backoff */
#define B43_NPHY_C2_CGAINI_GAINBKOFF_SHIFT 0
#define B43_NPHY_C2_CGAINI_CLIPGBKOFF 0x03E0 /* Clip gain backoff */
#define B43_NPHY_C2_CGAINI_CLIPGBKOFF_SHIFT 5
#define B43_NPHY_C2_CGAINI_GAINSTEP 0x1C00 /* Gain step */
#define B43_NPHY_C2_CGAINI_GAINSTEP_SHIFT 10
#define B43_NPHY_C2_CGAINI_CL2DETECT 0x2000 /* Clip 2 detect mask */
#define B43_NPHY_C2_CCK_CGAINI B43_PHY_N(0x01D + 22) /* Core 2 CCK compute gain info */
#define B43_NPHY_C2_CCK_CGAINI B43_PHY_N(0x033) /* Core 2 CCK compute gain info */
#define B43_NPHY_C2_CCK_CGAINI_GAINBKOFF 0x001F /* Gain backoff */
#define B43_NPHY_C2_CCK_CGAINI_CLIPGBKOFF 0x01E0 /* CCK barely clip gain backoff */
#define B43_NPHY_C2_MINMAX_GAIN B43_PHY_N(0x01E + 22) /* Core 2 min/max gain */
#define B43_NPHY_C2_MINMAX_GAIN B43_PHY_N(0x034) /* Core 2 min/max gain */
#define B43_NPHY_C2_MINGAIN 0x00FF /* Minimum gain */
#define B43_NPHY_C2_MINGAIN_SHIFT 0
#define B43_NPHY_C2_MAXGAIN 0xFF00 /* Maximum gain */
#define B43_NPHY_C2_MAXGAIN_SHIFT 8
#define B43_NPHY_C2_CCK_MINMAX_GAIN B43_PHY_N(0x01F + 22) /* Core 2 CCK min/max gain */
#define B43_NPHY_C2_CCK_MINMAX_GAIN B43_PHY_N(0x035) /* Core 2 CCK min/max gain */
#define B43_NPHY_C2_CCK_MINGAIN 0x00FF /* Minimum gain */
#define B43_NPHY_C2_CCK_MINGAIN_SHIFT 0
#define B43_NPHY_C2_CCK_MAXGAIN 0xFF00 /* Maximum gain */
#define B43_NPHY_C2_CCK_MAXGAIN_SHIFT 8
#define B43_NPHY_C2_INITGAIN B43_PHY_N(0x020 + 22) /* Core 2 initial gain code */
#define B43_NPHY_C2_INITGAIN B43_PHY_N(0x036) /* Core 2 initial gain code */
#define B43_NPHY_C2_INITGAIN_EXTLNA 0x0001 /* External LNA index */
#define B43_NPHY_C2_INITGAIN_LNA 0x0006 /* LNA index */
#define B43_NPHY_C2_INITGAIN_LNAIDX_SHIFT 1
@ -101,23 +107,23 @@
#define B43_NPHY_C2_INITGAIN_HPVGA2_SHIFT 7
#define B43_NPHY_C2_INITGAIN_TRRX 0x1000 /* TR RX index */
#define B43_NPHY_C2_INITGAIN_TRTX 0x2000 /* TR TX index */
#define B43_NPHY_C2_CLIP1_HIGAIN B43_PHY_N(0x021 + 22) /* Core 2 clip1 high gain code */
#define B43_NPHY_C2_CLIP1_MEDGAIN B43_PHY_N(0x022 + 22) /* Core 2 clip1 medium gain code */
#define B43_NPHY_C2_CLIP1_LOGAIN B43_PHY_N(0x023 + 22) /* Core 2 clip1 low gain code */
#define B43_NPHY_C2_CLIP2_GAIN B43_PHY_N(0x024 + 22) /* Core 2 clip2 gain code */
#define B43_NPHY_C2_FILTERGAIN B43_PHY_N(0x025 + 22) /* Core 2 filter gain */
#define B43_NPHY_C2_LPF_QHPF_BW B43_PHY_N(0x026 + 22) /* Core 2 LPF Q HP F bandwidth */
#define B43_NPHY_C2_CLIPWBTHRES B43_PHY_N(0x027 + 22) /* Core 2 clip wideband threshold */
#define B43_NPHY_C2_CLIP1_HIGAIN B43_PHY_N(0x037) /* Core 2 clip1 high gain code */
#define B43_NPHY_C2_CLIP1_MEDGAIN B43_PHY_N(0x038) /* Core 2 clip1 medium gain code */
#define B43_NPHY_C2_CLIP1_LOGAIN B43_PHY_N(0x039) /* Core 2 clip1 low gain code */
#define B43_NPHY_C2_CLIP2_GAIN B43_PHY_N(0x03A) /* Core 2 clip2 gain code */
#define B43_NPHY_C2_FILTERGAIN B43_PHY_N(0x03B) /* Core 2 filter gain */
#define B43_NPHY_C2_LPF_QHPF_BW B43_PHY_N(0x03C) /* Core 2 LPF Q HP F bandwidth */
#define B43_NPHY_C2_CLIPWBTHRES B43_PHY_N(0x03D) /* Core 2 clip wideband threshold */
#define B43_NPHY_C2_CLIPWBTHRES_CLIP2 0x003F /* Clip 2 */
#define B43_NPHY_C2_CLIPWBTHRES_CLIP2_SHIFT 0
#define B43_NPHY_C2_CLIPWBTHRES_CLIP1 0x0FC0 /* Clip 1 */
#define B43_NPHY_C2_CLIPWBTHRES_CLIP1_SHIFT 6
#define B43_NPHY_C2_W1THRES B43_PHY_N(0x028 + 22) /* Core 2 W1 threshold */
#define B43_NPHY_C2_EDTHRES B43_PHY_N(0x029 + 22) /* Core 2 ED threshold */
#define B43_NPHY_C2_SMSIGTHRES B43_PHY_N(0x02A + 22) /* Core 2 small sig threshold */
#define B43_NPHY_C2_NBCLIPTHRES B43_PHY_N(0x02B + 22) /* Core 2 NB clip threshold */
#define B43_NPHY_C2_CLIP1THRES B43_PHY_N(0x02C + 22) /* Core 2 clip1 threshold */
#define B43_NPHY_C2_CLIP2THRES B43_PHY_N(0x02D + 22) /* Core 2 clip2 threshold */
#define B43_NPHY_C2_W1THRES B43_PHY_N(0x03E) /* Core 2 W1 threshold */
#define B43_NPHY_C2_EDTHRES B43_PHY_N(0x03F) /* Core 2 ED threshold */
#define B43_NPHY_C2_SMSIGTHRES B43_PHY_N(0x040) /* Core 2 small sig threshold */
#define B43_NPHY_C2_NBCLIPTHRES B43_PHY_N(0x041) /* Core 2 NB clip threshold */
#define B43_NPHY_C2_CLIP1THRES B43_PHY_N(0x042) /* Core 2 clip1 threshold */
#define B43_NPHY_C2_CLIP2THRES B43_PHY_N(0x043) /* Core 2 clip2 threshold */
#define B43_NPHY_CRS_THRES1 B43_PHY_N(0x044) /* CRS threshold 1 */
#define B43_NPHY_CRS_THRES2 B43_PHY_N(0x045) /* CRS threshold 2 */
@ -225,7 +231,7 @@
#define B43_NPHY_C2_TXIQ_COMP_OFF B43_PHY_N(0x088) /* Core 2 TX I/Q comp offset */
#define B43_NPHY_C1_TXCTL B43_PHY_N(0x08B) /* Core 1 TX control */
#define B43_NPHY_C2_TXCTL B43_PHY_N(0x08C) /* Core 2 TX control */
#define B43_NPHY_SCRAM_SIGCTL B43_PHY_N(0x090) /* Scran signal control */
#define B43_NPHY_SCRAM_SIGCTL B43_PHY_N(0x090) /* Scram signal control */
#define B43_NPHY_SCRAM_SIGCTL_INITST 0x007F /* Initial state value */
#define B43_NPHY_SCRAM_SIGCTL_INITST_SHIFT 0
#define B43_NPHY_SCRAM_SIGCTL_SCM 0x0080 /* Scram control mode */