[WATCHDOG] wdt_pci.c: remove #ifdef CONFIG_WDT_501_PCI

Change the wdt_pci.c watchdog driver so that the code is the same for
both the PCI-WDT500 as the PCI-WDT501 card. The selection of the card
is now being done via the module parameter: 'type' instead of the
config option CONFIG_WDT_501_PCI.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This commit is contained in:
Wim Van Sebroeck 2009-06-19 09:32:57 +00:00
parent 44df75353b
commit 9b901ee0cb
2 changed files with 66 additions and 74 deletions

View File

@ -1007,24 +1007,16 @@ config WDTPCI
---help---
If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
To compile this driver as a module, choose M here: the
module will be called wdt_pci.
config WDT_501_PCI
bool "PCI-WDT501 features"
depends on WDTPCI
help
Saying Y here and creating a character special file /dev/temperature
with major number 10 and minor number 131 ("man mknod") will give
you a thermometer inside your computer: reading from
/dev/temperature yields one byte, the temperature in degrees
Fahrenheit. This works only if you have a PCI-WDT501 watchdog board
installed.
If you have a PCI-WDT501 watchdog board then you can enable the
temperature sensor by setting the type parameter to 501.
If you want to enable the Fan Tachometer on the PCI-WDT501, then you
can do this via the tachometer parameter. Only do this if you have a
fan tachometer actually set up.
To compile this driver as a module, choose M here: the
module will be called wdt_pci.
#
# USB-based Watchdog Cards
#

View File

@ -2,7 +2,7 @@
* Industrial Computer Source PCI-WDT500/501 driver
*
* (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
* All Rights Reserved.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@ -99,14 +99,16 @@ MODULE_PARM_DESC(nowayout,
"Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
#ifdef CONFIG_WDT_501_PCI
/* Support for the Fan Tachometer on the PCI-WDT501 */
static int tachometer;
module_param(tachometer, int, 0);
MODULE_PARM_DESC(tachometer,
"PCI-WDT501 Fan Tachometer support (0=disable, default=0)");
#endif /* CONFIG_WDT_501_PCI */
"PCI-WDT501 Fan Tachometer support (0=disable, default=0)");
static int type = 500;
module_param(type, int, 0);
MODULE_PARM_DESC(type,
"PCI-WDT501 Card type (500 or 501 , default=500)");
/*
* Programming support
@ -266,22 +268,21 @@ static int wdtpci_get_status(int *status)
*status |= WDIOF_EXTERN1;
if (new_status & WDC_SR_ISII1)
*status |= WDIOF_EXTERN2;
#ifdef CONFIG_WDT_501_PCI
if (!(new_status & WDC_SR_TGOOD))
*status |= WDIOF_OVERHEAT;
if (!(new_status & WDC_SR_PSUOVER))
*status |= WDIOF_POWEROVER;
if (!(new_status & WDC_SR_PSUUNDR))
*status |= WDIOF_POWERUNDER;
if (tachometer) {
if (!(new_status & WDC_SR_FANGOOD))
*status |= WDIOF_FANFAULT;
if (type == 501) {
if (!(new_status & WDC_SR_TGOOD))
*status |= WDIOF_OVERHEAT;
if (!(new_status & WDC_SR_PSUOVER))
*status |= WDIOF_POWEROVER;
if (!(new_status & WDC_SR_PSUUNDR))
*status |= WDIOF_POWERUNDER;
if (tachometer) {
if (!(new_status & WDC_SR_FANGOOD))
*status |= WDIOF_FANFAULT;
}
}
#endif /* CONFIG_WDT_501_PCI */
return 0;
}
#ifdef CONFIG_WDT_501_PCI
/**
* wdtpci_get_temperature:
*
@ -300,7 +301,6 @@ static int wdtpci_get_temperature(int *temperature)
*temperature = (c * 11 / 15) + 7;
return 0;
}
#endif /* CONFIG_WDT_501_PCI */
/**
* wdtpci_interrupt:
@ -327,22 +327,22 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id)
printk(KERN_CRIT PFX "status %d\n", status);
#ifdef CONFIG_WDT_501_PCI
if (!(status & WDC_SR_TGOOD)) {
u8 alarm = inb(WDT_RT);
printk(KERN_CRIT PFX "Overheat alarm.(%d)\n", alarm);
udelay(8);
if (type == 501) {
if (!(status & WDC_SR_TGOOD)) {
printk(KERN_CRIT PFX "Overheat alarm.(%d)\n",
inb(WDT_RT));
udelay(8);
}
if (!(status & WDC_SR_PSUOVER))
printk(KERN_CRIT PFX "PSU over voltage.\n");
if (!(status & WDC_SR_PSUUNDR))
printk(KERN_CRIT PFX "PSU under voltage.\n");
if (tachometer) {
if (!(status & WDC_SR_FANGOOD))
printk(KERN_CRIT PFX "Possible fan fault.\n");
}
}
if (!(status & WDC_SR_PSUOVER))
printk(KERN_CRIT PFX "PSU over voltage.\n");
if (!(status & WDC_SR_PSUUNDR))
printk(KERN_CRIT PFX "PSU under voltage.\n");
if (tachometer) {
if (!(status & WDC_SR_FANGOOD))
printk(KERN_CRIT PFX "Possible fan fault.\n");
}
#endif /* CONFIG_WDT_501_PCI */
if (!(status&WDC_SR_WCCR)) {
if (!(status & WDC_SR_WCCR)) {
#ifdef SOFTWARE_REBOOT
#ifdef ONLY_TESTING
printk(KERN_CRIT PFX "Would Reboot.\n");
@ -371,12 +371,13 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id)
*/
static ssize_t wdtpci_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
size_t count, loff_t *ppos)
{
if (count) {
if (!nowayout) {
size_t i;
/* In case it was set long ago */
expect_close = 0;
for (i = 0; i != count; i++) {
@ -406,10 +407,10 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf,
static long wdtpci_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
int new_heartbeat;
int status;
void __user *argp = (void __user *)arg;
int __user *p = argp;
int new_heartbeat;
int status;
static struct watchdog_info ident = {
.options = WDIOF_SETTIMEOUT|
@ -421,11 +422,12 @@ static long wdtpci_ioctl(struct file *file, unsigned int cmd,
/* Add options according to the card we have */
ident.options |= (WDIOF_EXTERN1|WDIOF_EXTERN2);
#ifdef CONFIG_WDT_501_PCI
ident.options |= (WDIOF_OVERHEAT|WDIOF_POWERUNDER|WDIOF_POWEROVER);
if (tachometer)
ident.options |= WDIOF_FANFAULT;
#endif /* CONFIG_WDT_501_PCI */
if (type == 501) {
ident.options |= (WDIOF_OVERHEAT|WDIOF_POWERUNDER|
WDIOF_POWEROVER);
if (tachometer)
ident.options |= WDIOF_FANFAULT;
}
switch (cmd) {
case WDIOC_GETSUPPORT:
@ -503,7 +505,6 @@ static int wdtpci_release(struct inode *inode, struct file *file)
return 0;
}
#ifdef CONFIG_WDT_501_PCI
/**
* wdtpci_temp_read:
* @file: file handle to the watchdog board
@ -554,7 +555,6 @@ static int wdtpci_temp_release(struct inode *inode, struct file *file)
{
return 0;
}
#endif /* CONFIG_WDT_501_PCI */
/**
* notify_sys:
@ -596,7 +596,6 @@ static struct miscdevice wdtpci_miscdev = {
.fops = &wdtpci_fops,
};
#ifdef CONFIG_WDT_501_PCI
static const struct file_operations wdtpci_temp_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
@ -610,7 +609,6 @@ static struct miscdevice temp_miscdev = {
.name = "temperature",
.fops = &wdtpci_temp_fops,
};
#endif /* CONFIG_WDT_501_PCI */
/*
* The WDT card needs to learn about soft shutdowns in order to
@ -633,6 +631,11 @@ static int __devinit wdtpci_init_one(struct pci_dev *dev,
return -ENODEV;
}
if (type != 500 && type != 501) {
printk(KERN_ERR PFX "unknown card type '%d'.\n", type);
return -ENODEV;
}
if (pci_enable_device(dev)) {
printk(KERN_ERR PFX "Not possible to enable PCI Device\n");
return -ENODEV;
@ -678,15 +681,15 @@ static int __devinit wdtpci_init_one(struct pci_dev *dev,
goto out_irq;
}
#ifdef CONFIG_WDT_501_PCI
ret = misc_register(&temp_miscdev);
if (ret) {
printk(KERN_ERR PFX
if (type == 501) {
ret = misc_register(&temp_miscdev);
if (ret) {
printk(KERN_ERR PFX
"cannot register miscdev on minor=%d (err=%d)\n",
TEMP_MINOR, ret);
goto out_rbt;
TEMP_MINOR, ret);
goto out_rbt;
}
}
#endif /* CONFIG_WDT_501_PCI */
ret = misc_register(&wdtpci_miscdev);
if (ret) {
@ -698,20 +701,18 @@ static int __devinit wdtpci_init_one(struct pci_dev *dev,
printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
heartbeat, nowayout);
#ifdef CONFIG_WDT_501_PCI
printk(KERN_INFO "wdt: Fan Tachometer is %s\n",
if (type == 501)
printk(KERN_INFO "wdt: Fan Tachometer is %s\n",
(tachometer ? "Enabled" : "Disabled"));
#endif /* CONFIG_WDT_501_PCI */
ret = 0;
out:
return ret;
out_misc:
#ifdef CONFIG_WDT_501_PCI
misc_deregister(&temp_miscdev);
if (type == 501)
misc_deregister(&temp_miscdev);
out_rbt:
#endif /* CONFIG_WDT_501_PCI */
unregister_reboot_notifier(&wdtpci_notifier);
out_irq:
free_irq(irq, &wdtpci_miscdev);
@ -728,9 +729,8 @@ static void __devexit wdtpci_remove_one(struct pci_dev *pdev)
/* here we assume only one device will ever have
* been picked up and registered by probe function */
misc_deregister(&wdtpci_miscdev);
#ifdef CONFIG_WDT_501_PCI
misc_deregister(&temp_miscdev);
#endif /* CONFIG_WDT_501_PCI */
if (type == 501)
misc_deregister(&temp_miscdev);
unregister_reboot_notifier(&wdtpci_notifier);
free_irq(irq, &wdtpci_miscdev);
release_region(io, 16);