pcm037: use of new iomux implementation

This was only compilation tested.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is contained in:
Valentin Longchamp 2009-01-28 15:13:54 +01:00 committed by Sascha Hauer
parent 63d976672e
commit bab389c875

View File

@ -123,6 +123,18 @@ static struct platform_device *devices[] __initdata = {
&pcm037_sram_device,
};
static int uart0_pins[] = {
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1
};
static int uart2_pins[] = {
MX31_PIN_CSPI3_MOSI__RXD3,
MX31_PIN_CSPI3_MISO__TXD3
};
/*
* Board specific initialization.
*/
@ -130,24 +142,18 @@ static void __init mxc_board_init(void)
{
platform_add_devices(devices, ARRAY_SIZE(devices));
mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_iomux_mode(MX31_PIN_CSPI3_MOSI__RXD3);
mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3);
mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2");
mxc_register_device(&mxc_uart_device2, &uart_pdata);
mxc_iomux_mode(MX31_PIN_BATT_LINE__OWIRE);
mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
mxc_register_device(&mxc_w1_master_device, NULL);
/* SMSC9215 IRQ pin */
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO));
if (!gpio_request(MX31_PIN_GPIO3_1, "pcm037-eth"))
if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
"pcm037-eth"))
gpio_direction_input(MX31_PIN_GPIO3_1);
mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);