V4L/DVB (3395): Fixed Pinnacle 300i DVB-T support

- fixed tda9886 port 2 setting
- turned remote control receiver off via saa7134 GPIO to avoid i2c hangs
- modified tda9886 client calls to direct i2c access to allow proper return
  to analog mode
- allow mode change to V4L2_TUNER_DIGITAL_TV in tuner VIDIOC_S_FREQUENCY
  client call

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This commit is contained in:
Hartmut Hackmann 2006-03-03 12:09:26 -03:00 committed by Mauro Carvalho Chehab
parent 6ba54abe62
commit be6f655d03
3 changed files with 18 additions and 8 deletions

View File

@ -977,7 +977,7 @@ struct saa7134_board saa7134_boards[] = {
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
.tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
.inputs = {{
.name = name_tv,
.vmux = 3,
@ -1666,7 +1666,7 @@ struct saa7134_board saa7134_boards[] = {
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
.tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
@ -3205,6 +3205,11 @@ int saa7134_board_init1(struct saa7134_dev *dev)
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000);
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
/* this turns the remote control chip off to work around a bug in it */
saa_writeb(SAA7134_GPIO_GPMODE1, 0x80);
saa_writeb(SAA7134_GPIO_GPSTATUS1, 0x80);
break;
case SAA7134_BOARD_MONSTERTV_MOBILE:
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000);

View File

@ -110,6 +110,7 @@ static int mt352_pinnacle_init(struct dvb_frontend* fe)
mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg));
mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg));
mt352_write(fe, irq_cfg, sizeof(irq_cfg));
return 0;
}
@ -117,8 +118,10 @@ static int mt352_pinnacle_pll_set(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params,
u8* pllbuf)
{
static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
static int off = TDA9887_PRESENT | TDA9887_PORT2_ACTIVE;
u8 off[] = { 0x00, 0xf1};
u8 on[] = { 0x00, 0x71};
struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)};
struct saa7134_dev *dev = fe->dvb->priv;
struct v4l2_frequency f;
@ -126,9 +129,10 @@ static int mt352_pinnacle_pll_set(struct dvb_frontend* fe,
f.tuner = 0;
f.type = V4L2_TUNER_DIGITAL_TV;
f.frequency = params->frequency / 1000 * 16 / 1000;
saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
i2c_transfer(&dev->i2c_adap, &msg, 1);
saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&off);
msg.buf = on;
i2c_transfer(&dev->i2c_adap, &msg, 1);
pinnacle_antenna_pwr(dev, antenna_pwr);

View File

@ -713,8 +713,9 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
struct v4l2_frequency *f = arg;
switch_v4l2();
if (V4L2_TUNER_RADIO == f->type &&
V4L2_TUNER_RADIO != t->mode) {
if ((V4L2_TUNER_RADIO == f->type && V4L2_TUNER_RADIO != t->mode)
|| (V4L2_TUNER_DIGITAL_TV == f->type
&& V4L2_TUNER_DIGITAL_TV != t->mode)) {
if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY")
== EINVAL)
return 0;