airo: re-arrange WPA capability checks

The capability register has to be read for other (upcoming) stuff, so fold
the WPA test function back into _init_airo_card() and move the netdevice
registration stuff above it so that the netdevice has a name by the time
the card's capabilities are printed out.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Dan Williams 2009-01-24 09:10:42 -05:00 committed by John W. Linville
parent f55d4517eb
commit f65b56d67b

View File

@ -2734,28 +2734,6 @@ static void airo_networks_initialize(struct airo_info *ai)
&ai->network_free_list);
}
static int airo_test_wpa_capable(struct airo_info *ai)
{
int status;
CapabilityRid cap_rid;
status = readCapabilityRid(ai, &cap_rid, 1);
if (status != SUCCESS) return 0;
/* Only firmware versions 5.30.17 or better can do WPA */
if (le16_to_cpu(cap_rid.softVer) > 0x530
|| (le16_to_cpu(cap_rid.softVer) == 0x530
&& le16_to_cpu(cap_rid.softSubVer) >= 17)) {
airo_print_info("", "WPA is supported.");
return 1;
}
/* No WPA support */
airo_print_info("", "WPA unsupported (only firmware versions 5.30.17"
" and greater support WPA. Detected %s)", cap_rid.prodVer);
return 0;
}
static struct net_device *_init_airo_card( unsigned short irq, int port,
int is_pcmcia, struct pci_dev *pci,
struct device *dmdev )
@ -2763,6 +2741,7 @@ static struct net_device *_init_airo_card( unsigned short irq, int port,
struct net_device *dev;
struct airo_info *ai;
int i, rc;
CapabilityRid cap_rid;
/* Create the network device object. */
dev = alloc_netdev(sizeof(*ai), "", ether_setup);
@ -2832,7 +2811,7 @@ static struct net_device *_init_airo_card( unsigned short irq, int port,
}
if (probe) {
if ( setup_card( ai, dev->dev_addr, 1 ) != SUCCESS ) {
if (setup_card(ai, dev->dev_addr, 1) != SUCCESS) {
airo_print_err(dev->name, "MAC could not be enabled" );
rc = -EIO;
goto err_out_map;
@ -2842,18 +2821,6 @@ static struct net_device *_init_airo_card( unsigned short irq, int port,
set_bit(FLAG_FLASHING, &ai->flags);
}
/* Test for WPA support */
if (airo_test_wpa_capable(ai)) {
set_bit(FLAG_WPA_CAPABLE, &ai->flags);
ai->bssListFirst = RID_WPA_BSSLISTFIRST;
ai->bssListNext = RID_WPA_BSSLISTNEXT;
ai->bssListRidLen = sizeof(BSSListRid);
} else {
ai->bssListFirst = RID_BSSLISTFIRST;
ai->bssListNext = RID_BSSLISTNEXT;
ai->bssListRidLen = sizeof(BSSListRid) - sizeof(BSSListRidExtra);
}
strcpy(dev->name, "eth%d");
rc = register_netdev(dev);
if (rc) {
@ -2864,6 +2831,37 @@ static struct net_device *_init_airo_card( unsigned short irq, int port,
if (!ai->wifidev)
goto err_out_reg;
rc = readCapabilityRid(ai, &cap_rid, 1);
if (rc != SUCCESS) {
rc = -EIO;
goto err_out_wifi;
}
airo_print_info(dev->name, "Firmware version %x.%x.%02x",
((le16_to_cpu(cap_rid.softVer) >> 8) & 0xF),
(le16_to_cpu(cap_rid.softVer) & 0xFF),
le16_to_cpu(cap_rid.softSubVer));
/* Test for WPA support */
/* Only firmware versions 5.30.17 or better can do WPA */
if (le16_to_cpu(cap_rid.softVer) > 0x530
|| (le16_to_cpu(cap_rid.softVer) == 0x530
&& le16_to_cpu(cap_rid.softSubVer) >= 17)) {
airo_print_info(ai->dev->name, "WPA supported.");
set_bit(FLAG_WPA_CAPABLE, &ai->flags);
ai->bssListFirst = RID_WPA_BSSLISTFIRST;
ai->bssListNext = RID_WPA_BSSLISTNEXT;
ai->bssListRidLen = sizeof(BSSListRid);
} else {
airo_print_info(ai->dev->name, "WPA unsupported with firmware "
"versions older than 5.30.17.");
ai->bssListFirst = RID_BSSLISTFIRST;
ai->bssListNext = RID_BSSLISTNEXT;
ai->bssListRidLen = sizeof(BSSListRid) - sizeof(BSSListRidExtra);
}
set_bit(FLAG_REGISTERED,&ai->flags);
airo_print_info(dev->name, "MAC enabled %pM", dev->dev_addr);