Blackfin: fix early L1 relocation crash

Our early L1 relocate code may implicitly call code which lives in L1
memory.  This is due to the dma_memcpy() rewrite that made the DMA code
lockless and safe to be used by multiple processes.  If we start the
early DMA memcpy to relocate things into L1 instruction but then our
DMA memcpy code calls a function that lives in L1, things fall apart.
As such, create a small dedicated DMA memcpy routine that we can assume
sanity at boot time.

Reported-by: Filip Van Rillaer <filip.vanrillaer@oneaccess-net.com>
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This commit is contained in:
Robin Getz 2009-04-23 20:49:43 +00:00 committed by Mike Frysinger
parent f5879fda09
commit fecbd7366b
3 changed files with 112 additions and 24 deletions

View File

@ -253,5 +253,7 @@ static inline void clear_dma_irqstat(unsigned int channel)
void *dma_memcpy(void *dest, const void *src, size_t count);
void *safe_dma_memcpy(void *dest, const void *src, size_t count);
void blackfin_dma_early_init(void);
void early_dma_memcpy(void *dest, const void *src, size_t count);
void early_dma_memcpy_done(void);
#endif

View File

@ -232,6 +232,87 @@ void blackfin_dma_resume(void)
void __init blackfin_dma_early_init(void)
{
bfin_write_MDMA_S0_CONFIG(0);
bfin_write_MDMA_S1_CONFIG(0);
}
void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size)
{
unsigned long dst = (unsigned long)pdst;
unsigned long src = (unsigned long)psrc;
struct dma_register *dst_ch, *src_ch;
/* We assume that everything is 4 byte aligned, so include
* a basic sanity check
*/
BUG_ON(dst % 4);
BUG_ON(src % 4);
BUG_ON(size % 4);
/* Force a sync in case a previous config reset on this channel
* occurred. This is needed so subsequent writes to DMA registers
* are not spuriously lost/corrupted.
*/
__builtin_bfin_ssync();
src_ch = 0;
/* Find an avalible memDMA channel */
while (1) {
if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) {
dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
} else {
dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
}
if (!bfin_read16(&src_ch->cfg)) {
break;
} else {
if (bfin_read16(&src_ch->irq_status) & DMA_DONE)
bfin_write16(&src_ch->cfg, 0);
}
}
/* Destination */
bfin_write32(&dst_ch->start_addr, dst);
bfin_write16(&dst_ch->x_count, size >> 2);
bfin_write16(&dst_ch->x_modify, 1 << 2);
bfin_write16(&dst_ch->irq_status, DMA_DONE | DMA_ERR);
/* Source */
bfin_write32(&src_ch->start_addr, src);
bfin_write16(&src_ch->x_count, size >> 2);
bfin_write16(&src_ch->x_modify, 1 << 2);
bfin_write16(&src_ch->irq_status, DMA_DONE | DMA_ERR);
/* Enable */
bfin_write16(&src_ch->cfg, DMAEN | WDSIZE_32);
bfin_write16(&dst_ch->cfg, WNR | DI_EN | DMAEN | WDSIZE_32);
/* Since we are atomic now, don't use the workaround ssync */
__builtin_bfin_ssync();
}
void __init early_dma_memcpy_done(void)
{
while ((bfin_read_MDMA_S0_CONFIG() && !(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) ||
(bfin_read_MDMA_S1_CONFIG() && !(bfin_read_MDMA_D1_IRQ_STATUS() & DMA_DONE)))
continue;
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
bfin_write_MDMA_D1_IRQ_STATUS(DMA_DONE | DMA_ERR);
/*
* Now that DMA is done, we would normally flush cache, but
* i/d cache isn't running this early, so we don't bother,
* and just clear out the DMA channel for next time
*/
bfin_write_MDMA_S0_CONFIG(0);
bfin_write_MDMA_S1_CONFIG(0);
bfin_write_MDMA_D0_CONFIG(0);
bfin_write_MDMA_D1_CONFIG(0);
__builtin_bfin_ssync();
}
/**

View File

@ -150,40 +150,45 @@ void __init bfin_relocate_l1_mem(void)
unsigned long l1_data_b_length;
unsigned long l2_length;
blackfin_dma_early_init();
l1_code_length = _etext_l1 - _stext_l1;
if (l1_code_length > L1_CODE_LENGTH)
panic("L1 Instruction SRAM Overflow\n");
/* cannot complain as printk is not available as yet.
* But we can continue booting and complain later!
/*
* due to the ALIGN(4) in the arch/blackfin/kernel/vmlinux.lds.S
* we know that everything about l1 text/data is nice and aligned,
* so copy by 4 byte chunks, and don't worry about overlapping
* src/dest.
*
* We can't use the dma_memcpy functions, since they can call
* scheduler functions which might be in L1 :( and core writes
* into L1 instruction cause bad access errors, so we are stuck,
* we are required to use DMA, but can't use the common dma
* functions. We can't use memcpy either - since that might be
* going to be in the relocated L1
*/
/* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
blackfin_dma_early_init();
/* if necessary, copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
l1_code_length = _etext_l1 - _stext_l1;
if (l1_code_length)
early_dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
/* if necessary, copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
l1_data_a_length = _sbss_l1 - _sdata_l1;
if (l1_data_a_length > L1_DATA_A_LENGTH)
panic("L1 Data SRAM Bank A Overflow\n");
/* Copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
if (l1_data_a_length)
early_dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
/* if necessary, copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
l1_data_b_length = _sbss_b_l1 - _sdata_b_l1;
if (l1_data_b_length > L1_DATA_B_LENGTH)
panic("L1 Data SRAM Bank B Overflow\n");
/* Copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
if (l1_data_b_length)
early_dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
l1_data_a_length, l1_data_b_length);
early_dma_memcpy_done();
/* if necessary, copy _stext_l2 to _edata_l2 to L2 SRAM */
if (L2_LENGTH != 0) {
l2_length = _sbss_l2 - _stext_l2;
if (l2_length > L2_LENGTH)
panic("L2 SRAM Overflow\n");
/* Copy _stext_l2 to _edata_l2 to L2 SRAM */
dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
if (l2_length)
memcpy(_stext_l2, _l2_lma_start, l2_length);
}
}