Commit Graph

31 Commits

Author SHA1 Message Date
Russell King
ceb0885d3b Merge branch 'misc' into devel
Conflicts:
	arch/arm/mm/init.c
2010-07-31 14:20:02 +01:00
Russell King
7cfe249475 ARM: AMBA: Add pclk support to AMBA bus infrastructure
Some platforms gate the pclk (APB - the bus - clock) to the peripherals
for power saving, along with the functional clock.  When devices are
accessed without pclk enabled, the kernel will oops.

This gives them two options:

1. Leave all clocks on all the time.
2. Attempt to gate pclk along with the functional clock.

(With some hardware, pclk and the functional clock are gated by a single
bit in a register.)

(1) has the disadvantage that it causes increased power usage, which is
bad news for battery operated devices.  (2) can lead to kernel oops if
registers are accessed without the functional clock being enabled.

So, introduce the apb_pclk signal in such a way existing drivers don't
need to be updated.  Essentially, this means we guarantee that:

1. pclk will be enabled whenever the driver is bound to a device -
   from probe() to remove() time.
2. pclk will also be enabled when reading the primecell IDs from the device.

In order to allow drivers to be incrementally updated to achieve greater
power savings, we provide two additional calls to allow drivers to
manage the pclk - amba_pclk_enable()/amba_pclk_disable().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-31 13:07:27 +01:00
Rabin Vincent
bb8f563c84 ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback
Platforms may have some external power control which need to be
controlled from board specific code.  Rename the translate_vdd()
callback to vdd_handler() and pass it the power mode.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29 15:39:05 +01:00
Linus Walleij
ac3e3fb424 ARM: 6158/2: PL011 baudrate extension for ST-Ericssons derivative
Implementation of the ST-Ericsson baudrate extension in the PL011
block. In this modified variant it is possible to change the
sampling factor from 16 to 8, and thanks to this we can get higher
baudrates while still using the same peripheral clock.

Also replace the simple division to determine the baud divisor
with DIV_ROUND_CLOSEST() rather than a simple integer division.

Cc: Alessandro Rubini <rubini@unipv.it>
Cc: Jerzy Kasenberg <jerzy.kasenberg@tieto.com>
Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27 10:43:47 +01:00
Linus Walleij
ec489aa8f9 ARM: 6157/2: PL011 TX/RX split of LCR for ST-Ericssons derivative
In the ST-Ericsson version of the PL011 the TX and RX have different
control registers.

Cc: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27 10:43:47 +01:00
Linus Torvalds
e38c1e54ce Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  DMAENGINE: DMA40 U8500 platform configuration
  DMA: PL330: Add dma api driver
2010-05-30 09:12:43 -07:00
Grant Likely
b1e50ebcf2 Merge remote branch 'origin' into secretlab/next-spi 2010-05-25 00:38:26 -06:00
Linus Walleij
781c7b129b spi/pl022: add support for the PL023 derivate
This adds support for a further ST variant of the PL022 called
PL023. Some differences in the control registers due to being
stripped down to SPI mode only, and a new clock feedback sample
delay config setting is available.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25 00:23:14 -06:00
Linus Walleij
556f4aeb7d spi/pl022: fix up differences between ARM and ST versions
The PL022 SPI driver did not cleanly separate between the
original unmodified ARM version and the ST Microelectronics
versions. Split this more cleanly and fix some whitespace
moaning from checkpatch at the same time.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25 00:23:13 -06:00
Jassi Brar
b3040e4067 DMA: PL330: Add dma api driver
Add DMA Engine API driver for the PL330 DMAC.
This driver is supposed to be reusable by various
platforms that have one or more PL330 DMACs.
Atm, DMA_SLAVE and DMA_MEMCPY capabilities have been
implemented.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Reviewed-by: Linus Walleij <linus.walleij@stericsson.com>
[dan.j.williams@intel.com: missing slab.h and ->device_control() fixups]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-23 20:28:19 -07:00
Russell King
ac1d426e82 Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/Kconfig
	arch/arm/include/asm/system.h
	arch/arm/mm/Kconfig
2010-05-17 17:24:04 +01:00
Linus Walleij
808d97ccbe ARM: 6033/1: ARM: MMCI: pass max frequency from platform
This introduce the field f_max into the mmci_platform_data,
making it possible to pass in a desired block clocking frequency
from a board configuration. This is often more desirable than
using a module parameter. We keep the module parameter as a
fallback as well as the default frequency specified for this
parameter if a parameter is not provided.

This also adds some kerneldoc style documentation to the
platform data struct in mmci.h.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 16:08:18 +01:00
viresh kumar
367d6accea ARM: 6003/1: removing compilation warning from pl061.h
pl061.h is using u8 type. including <linux/types.h> in pl061.h to avoid
warning.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-29 17:33:33 +01:00
viresh kumar
c36207a462 ARM: 5999/1: Including device.h and resource.h header files in linux/amba/bus.h
linux/amba/bus.h have dependencies on linux/device.h and linux/resource.h, but
it doesn't include them. We get compilation errors in our files which include
bus.h but doesn't include device.h and resource.h. This patch includes device.h
and resource.h in linux/amba/bus.h file.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Linux Walleij <linux.ml.walleij@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-29 17:33:31 +01:00
Russell King
3f17522ce4 Video: ARM CLCD: Better fix for swapped IENB and CNTL registers
On PL111, as found on Realview and other platforms, these registers are
always arranged as CNTL then IENB.  On PL110, these registers are IENB
then CNTL, except on Versatile platforms.

Re-arrange the handling of these register swaps so that PL111 always
gets it right without resorting to ifdefs, leaving the only case needing
special handling being PL110 on Versatile.

Fill out amba/clcd.h with the PL110/PL111 register definition
differences in case someone tries to use the PL110 specific definitions
on PL111.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-14 19:42:44 +00:00
Linus Walleij
4e10ae1131 ARM: 5951/1: ARM: fix documentation of the PrimeCell bus
This fixes the filepath encoded in <linux/amba/bus.h> and adds
some documentation as to what this bus really means.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-20 14:10:48 +00:00
Linus Walleij
6ef297f86b ARM: 5720/1: Move MMCI header to amba include dir
This moves the mmci platform data definition struct away from
arch/arm/include/asm/mach/mmc.h into the more proper place among
the other primecells in include/linux/amba/mmci.h and at the same
time renames it to "mmci.h", and also the struct in this file
confusingly named mmc_platform_data has been renamed
mmci_platform_data for clarity.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-22 20:49:04 +01:00
Russell King
59b69e27ca Merge branch 'u300' into devel 2009-09-21 16:03:13 +01:00
Linus Walleij
ee2b805c8e ARM: 5678/1: SSP/SPI PL022 polarity terminology fix
The definition of the SPI clock phase for the Motorola mode of
the PL022 driver was incorrect: the spec had been interpreted as
data being recieved on rising or falling edge of the clocks while
the correct interpretation is that data can be recieved on the
first or second edge transition, falling or rising depending on
the polarity setting.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-18 22:09:02 +01:00
Linus Walleij
f17a1f06d2 ARM: 5636/1: Move vendor enum to AMBA include
This moves the primecell vendor enum definition inside vic.c
out to linux/amba/bus.h where it belongs and replace any
occurances of specific vendor ID:s with the respective enums
instead.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-12 11:51:14 +01:00
Ben Dooks
78ddb27859 ARM: PL093: Header file for PL093 SSMC PrimeCell
Header to define the standard registers for an
PL093 SSMC memory controller.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:22:54 +01:00
Baruch Siach
1e9c285998 gpio: driver for PrimeCell PL061 GPIO controller
This is a driver for the ARM PrimeCell PL061 GPIO AMBA peripheral.  The
driver is implemented using the gpiolib framework.

This driver also includes support for the use of the PL061 as an interrupt
controller (secondary).

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19 16:46:03 -07:00
Linus Torvalds
2cf4d4514d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...
2009-06-14 13:42:43 -07:00
Linus Walleij
b43d65f7e8 [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
This adds a driver for the ARM PL022 PrimeCell SSP/SPI
driver found in the U300 platforms as well as in some
ARM reference hardware, and in a modified version on the
Nomadik board.

Reviewed-by: Alessandro Rubini <rubini-list@gnudd.com>
Reviewed-by: Russell King <linux@arm.linux.org.uk>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-10 22:39:52 +01:00
Alessandro Rubini
aa853f85d9 [ARM] 5543/1: arm: serial amba: add missing declaration in serial.h
This header is sometimes included in the uncompress stage to get
register values, but no <linux/amba/bus.h> can be included there.
So declare "struct amba_device" here before using it in a prototype.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-07 16:19:47 +01:00
Alessandro Rubini
5926a295bb [ARM] 5541/1: serial/amba-pl011.c: add support for the modified port found in Nomadik
The Nomadik 8815 SoC has a slightly modified version of the PL011 block.
The patch uses the different ID value as a key to select a vendor
structure that is used to keep track of the differences, as suggested
by Russell King.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-04 17:45:30 +01:00
Alessandro Rubini
03fbdb15c1 [ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void *
The second argument of the probe method points to the amba_id
structure, so it's better passed with the correct type. None of the
current in-tree drivers uses the pointer, so they have only been
checked for a clean compile.

Change suggested by Russell King.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-20 23:26:51 +01:00
David Woodhouse
62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00
Russell King
fbb18a277a [SERIAL] amba-pl010: allow platforms to specify modem control method
The amba-pl010 hardware does not provide RTS and DTR control lines; it
is expected that these will be implemented using GPIO.  Allow platforms
to supply a function to implement manipulation of modem control lines.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-26 23:13:39 +01:00
Catalin Marinas
243f196d57 [ARM] 3366/1: Allow the 16bpp mode configuration in the CLCD control register
Patch from Catalin Marinas

Starting with PL111, the 5551 or 565 modes can be configured in the
primecell's control register directly. This patch detects the required mode
and sets the correct value.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-16 14:10:19 +00:00
Russell King
a62c80e559 [ARM] Move AMBA include files to include/linux/amba/
Since the ARM AMBA bus is used on MIPS as well as ARM, we need
to make the bus available for other architectures to use.  Move
the AMBA include files from include/asm-arm/hardware/ to
include/linux/amba/

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 13:52:45 +00:00