Commit Graph

165 Commits

Author SHA1 Message Date
Gregory Bean
5affb60772 gpio: sx150x: correct and refine reset-on-probe behavior
Replace the arbitrary software-reset call from the device-probe
method, because:

- It is defective.  To work correctly, it should be two byte writes,
  not a single word write.  As it stands, it does nothing.

- Some devices with sx150x expanders installed have their NRESET pins
  ganged on the same line, so resetting one causes the others to reset -
  not a nice thing to do arbitrarily!

- The probe, usually taking place at boot, implies a recent hard-reset,
  so a software reset at this point is just a waste of energy anyway.

Therefore, make it optional, defaulting to off, as this will match the
common case of probing at powerup and also matches the current broken
no-op behavior.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09 18:57:24 -07:00
Mark Brown
b12c35e22d gpiolib: Implement set_debounce for WM831x GPIOs
The debounce times are approximate, they can be selected using the two
input functions.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12 11:27:57 +02:00
Rabin Vincent
03f822f5e5 gpio: Add STMPE GPIO driver
Add support for the GPIOs on STMPE I/O Expanders.

[l.fu@pengutronix.de: fix set direction input]
[l.fu@pengutronix.de: set GPIO alternate function while requesting]
Acked-by: Luotao Fu <l.fu@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12 11:27:55 +02:00
Gregory Bean
c34f16b70a gpio: sx150x: add Semtech I2C sx150x gpio expander driver
Add support for Semtech SX150-series I2C GPIO expanders.  Compatible
models include:

8 bits:  sx1508q
16 bits: sx1509q

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Trilok Soni <tsoni@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:09 -07:00
Daniel Gl?ckner
364fadb32b gpiolib: allow nested threaded irqs for poll(2)
The pca953x driver requires the use of threaded irqs as its irq
demultiplexer can sleep.  Our irq handler can be called from any context,
so use request_any_context_irq to allow threaded irqs as well.

Signed-off-by: Daniel Gl?ckner <dg@emlix.com>
Reported-by: Ian Jeffray <ian@jeffray.co.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:09 -07:00
Daniel Gl?ckner
5ba1821d1b gpiolib: get rid of struct poll_desc and worklet
As sysfs_notify_dirent has been made irq safe, there is no reason to not
call it directly from irq.  With the work_struct removed, the remaining
element in poll_desc is a sysfs_dirent pointer which may not be NULL.  We
can therefore store it directly in the idr and pass it as context to the
irq handler.

Most part of the patch deals with renaming defines and variables to
reflect their new use without functional change.

I also took the opportunity to initialize the idr statically.

Signed-off-by: Daniel Gl?ckner <dg@emlix.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:08 -07:00
David Brownell
9c4ba94661 gpiolib: decouple might_sleep_if() from DEBUG
Be more consistent about runtime programming interface abuse warnings,
which can reduce some confusion and trigger bugfixes.  Based on an
observation and patch from Jani Nikula.

Also update doc to highlight some sleeping-call issues and to match some
recent changes.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Jani Nikula <ext-jani.1.nikula@nokia.com>
Cc: "Ryan Mallon" <ryan@bluewatersys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:08 -07:00
Dmitry Eremin-Solenikov
49946f6814 pcf857x: support working w/o platform data
Provide sane defaults for pcf857x, so the driver can be used w/o providing
platform data (and thus can be simply bound via OF tree).

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:08 -07:00
Marc Kleine-Budde
4a22b8a4ad gpio: max730x: make pullups configurable via platformdata
The gpios on the max730x chips have support for internal pullups while in
input mode.

This patch adds support for configuring these pullups via platform data.
A new member ("input_pullup_active") to the platform data struct is
introduced.  A set bit in this variable activates the pullups while the
respective port is in input mode.  This is a compatible enhancement since
unset bits lead to disables pullups which was the default in the original
driver.

_Note_: the 4 lowest bits in "input_pullup_active" are unused because the
first 4 ports of the controller are not used, too.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:08 -07:00
Linus Torvalds
03c0c29aff Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (63 commits)
  of/platform: Register of_platform_drivers with an "of:" prefix
  of/address: Clean up function declarations
  of/spi: call of_register_spi_devices() from spi core code
  of: Provide default of_node_to_nid() implementation.
  of/device: Make of_device_make_bus_id() usable by other code.
  of/irq: Fix endian issues in parsing interrupt specifiers
  of: Fix phandle endian issues
  of/flattree: fix of_flat_dt_is_compatible() to match the full compatible string
  of: remove of_default_bus_ids
  of: make of_find_device_by_node generic
  microblaze: remove references to of_device and to_of_device
  sparc: remove references to of_device and to_of_device
  powerpc: remove references to of_device and to_of_device
  of/device: Replace of_device with platform_device in includes and core code
  of/device: Protect against binding of_platform_drivers to non-OF devices
  of: remove asm/of_device.h
  of: remove asm/of_platform.h
  of/platform: remove all of_bus_type and of_platform_bus_type references
  of: Merge of_platform_bus_type with platform_bus_type
  drivercore/of: Add OF style matching to platform bus
  ...

Fix up trivial conflicts in arch/microblaze/kernel/Makefile due to just
some obj-y removals by the devicetree branch, while the microblaze
updates added a new file.
2010-08-05 15:57:35 -07:00
Russell King
ceb0885d3b Merge branch 'misc' into devel
Conflicts:
	arch/arm/mm/init.c
2010-07-31 14:20:02 +01:00
Jon Povey
6a99ad4a2e gpio: fix spurious printk when freeing a gpio
When freeing a gpio that has not been exported, gpio_unexport() prints a
debug message when it should just fall through silently.

Example spurious message:

	gpio_unexport: gpio0 status -22

Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
Cc: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-27 14:32:07 -07:00
Russell King
2c39c9e149 ARM: Fix section build warnings for AMBA drivers
Found in the Versatile build:

WARNING: drivers/built-in.o(.data+0x14c): Section mismatch in reference from the variable pl061_gpio_driver to the (unknown reference) .init.data:(unknown)
The variable pl061_gpio_driver references
the (unknown reference) __initdata (unknown)

WARNING: drivers/built-in.o(.data+0x40f8): Section mismatch in reference from the variable pl011_driver to the (unknown reference) .init.data:(unknown)
The variable pl011_driver references
the (unknown reference) __initdata (unknown)

WARNING: drivers/built-in.o(.data+0x5ab4): Section mismatch in reference from the variable pl031_driver to the (unknown reference) .init.data:(unknown)
The variable pl031_driver references
the (unknown reference) __initdata (unknown)

Basically, amba_id structures must not be __initdata.  Also fix:

WARNING: drivers/built-in.o(.data+0x138): Section mismatch in reference from the variable pl061_gpio_driver to the function .init.text:pl061_probe()
The variable pl061_gpio_driver references
the function __init pl061_probe()

which is an incorrectly annotated probe function.  Fix it to reflect
the other AMBA bus probe functions by removing the __init attributation.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-27 10:48:43 +01:00
Grant Likely
4e4f62bf73 Merge commit 'v2.6.35-rc6' into devicetree/next
Conflicts:
	arch/sparc/kernel/prom_64.c
2010-07-24 09:49:13 -06:00
Andres Salomon
d45840d9f0 Andres has moved
My Collabora address is no longer enabled - update the MODULE_AUTHOR
fields of drivers to my current email address.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-20 16:25:41 -07:00
Anton Vorontsov
391c970c0d of/gpio: add default of_xlate function if device has a node pointer
Implement generic OF gpio hooks and thus make device-enabled GPIO chips
(i.e.  the ones that have gpio_chip->dev specified) automatically attach
to the OpenFirmware subsystem.  Which means that now we can handle I2C and
SPI GPIO chips almost* transparently.

* "Almost" because some chips still require platform data, and for these
  chips OF-glue is still needed, though with this change the glue will
  be much smaller.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Bill Gatliff <bgat@billgatliff.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
CC: linux-kernel@vger.kernel.org
CC: devicetree-discuss@lists.ozlabs.org
2010-07-05 16:14:30 -06:00
Grant Likely
594fa265e0 of/gpio: stop using device_node data pointer to find gpio_chip
Currently the kernel uses the struct device_node.data pointer to resolve
a struct gpio_chip pointer from a device tree node.  However, the .data
member doesn't provide any type checking and there aren't any rules
enforced on what it should be used for.  There's no guarantee that the
data stored in it actually points to an gpio_chip pointer.

Instead of relying on the .data pointer, this patch modifies the code
to add a lookup function which scans through the registered gpio_chips
and returns the gpio_chip that has a pointer to the specified
device_node.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Anton Vorontsov <avorontsov@ru.mvista.com>
CC: Grant Likely <grant.likely@secretlab.ca>
CC: David Brownell <dbrownell@users.sourceforge.net>
CC: Bill Gatliff <bgat@billgatliff.com>
CC: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Jean Delvare <khali@linux-fr.org>
CC: linux-kernel@vger.kernel.org
CC: devicetree-discuss@lists.ozlabs.org
2010-07-05 16:14:30 -06:00
Anton Vorontsov
a19e3da5bc of/gpio: Kill of_gpio_chip and add members directly to gpio_chip
The OF gpio infrastructure is great for describing GPIO connections within
the device tree.  However, using a GPIO binding still requires changes to
the gpio controller just to add an of_gpio structure.  In most cases, the
gpio controller doesn't actually need any special support and the simple
OF gpio mapping function is more than sufficient.  Additional, the current
scheme of using of_gpio_chip requires a convoluted scheme to maintain
1:1 mappings between of_gpio_chip and gpio_chip instances.

If the struct of_gpio_chip data members were moved into struct gpio_chip,
then it would simplify the processing of OF gpio bindings, and it would
make it trivial to use device tree OF connections on existing gpiolib
controller drivers.

This patch eliminates the of_gpio_chip structure and moves the relevant
fields into struct gpio_chip (conditional on CONFIG_OF_GPIO).  This move
simplifies the existing code and prepares for adding automatic device tree
support to existing drivers.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Bill Gatliff <bgat@billgatliff.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jean Delvare <khali@linux-fr.org>
2010-07-05 16:14:30 -06:00
Anton Vorontsov
cedb1881ba gpiolib: cosmetic improvements for error handling in gpiochip_add()
Hopefully it makes the code look nicer and makes it easier to extend
this function.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
CC: devicetree-discuss@lists.ozlabs.org
CC: linux-kernel@vger.kernel.org
2010-07-05 16:14:29 -06:00
David Brownell
926b1e2ca3 drivers/gpio is platform-neutral
Update Kconfig and Makefile in drivers/gpio to discourage inappropriate
addition of platform-specific code.

[akpm@linux-foundation.org: fix tpyo]
Signed-by: David Brownell <dbrownell@users.sourceforge.net>

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-29 15:29:32 -07:00
Florian Fainelli
75907a1153 gpio: Fix inverted rdc321x gpio data out registers
rdc_gpio_set_value_impl has the gpio data registers 1 and 2 inverted, fix this.

Signed-off-by: Bernhard Loos <bernhardloos@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28 01:37:59 +02:00
Florian Fainelli
8deca39e5c mfd: Change rdc321x resources flags to IORESOURCE_IO
The rdc321x southbridge PCI device has no MEM PCI resources that we could
pass to mfd_add_devices. Since 33254dd5, mfd_add_device checks for the
mem_base argument that we set to NULL. Changing the resources passed to
our MFD cells from IORESOURCE_MEM to IORESOURCE_IO fixes that. Since we use
those resources as offsets to the PCI configuration space base address of
the southbridge device this is also more adequate.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28 01:37:52 +02:00
Randy Dunlap
e4be3cb72c gpio: rdc321x needs to select MFD_CORE
Fix rdc321x-southbridge build:  GPIO_RDC321X needs to select
MFD_CORE so that the core is built at the same (or higher)
tristate level.

rdc321x-southbridge.c:(.devinit.text+0x6103): undefined reference to `mfd_add_devices'
rdc321x-southbridge.c:(.devexit.text+0xe5f): undefined reference to `mfd_remove_devices'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc:	Florian Fainelli <florian@openwrt.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28 01:37:48 +02:00
Rabin Vincent
d88b25be35 gpio: Add TC35892 GPIO driver
Add a GPIO driver to support the GPIOs on the TC35892 I/O Expander.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28 01:37:43 +02:00
Tejun Heo
374b72ecac gpio: Update gfp/slab.h includes for rdc321x
Implicit slab.h inclusion via percpu.h is about to go away.  Make sure
gfp.h or slab.h is included as necessary.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-05-28 01:37:36 +02:00
Ira W. Snyder
800e69fbd2 gpio: Add support for Janz VMOD-TTL Digital IO module
The Janz VMOD-TTL is a MODULbus daughterboard which fits onto any MODULbus
carrier board. It essentially consists of some various logic and a Zilog
Z8536 CIO Counter/Timer and Parallel IO Unit.

The board must be physically configured with jumpers to enable a user to
drive output signals. I am only interested in outputs, so I have made this
driver as simple as possible. It only supports a very minimal subset of the
features provided by the Z8536 chip.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28 01:37:33 +02:00
Florian Fainelli
9956d02d6e gpio: Add support for RDC321x GPIO controller
This patch adds a new GPIO driver for the RDC321x SoC GPIO controller.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28 01:37:29 +02:00
Daniel Mack
48baa18b25 drivers/gpio/it8761e_gpio: check return value of gpiochip_remove()
This eliminates the following build warning:

drivers/gpio/it8761e_gpio.c: In function `it8761e_gpio_exit':
drivers/gpio/it8761e_gpio.c:220: warning: ignoring return value of `gpiochip_remove', declared with attribute warn_unused_result

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:42 -07:00
Alek Du
8081c84c9c gpio: add Penwell gpio support
Intel Penwell chip has two 96 pins GPIO blocks, which are very similiar as
Intel Langwell chip GPIO block, except for pin number difference. This
patch expends the original Langwell GPIO driver to support Penwell's.

Signed-off-by: Alek Du <alek.du@intel.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:42 -07:00
Felipe Balbi
c4b5be98fe gpiolib: introduce set_debounce method
A few architectures, like OMAP, allow you to set a debouncing time for the
gpio before generating the IRQ.  Teach gpiolib about that.

Mark said:
: This would be generally useful for embedded systems, especially where
: the interrupt concerned is a wake source.  It allows drivers to avoid
: spurious interrupts from noisy sources so if the hardware supports it
: the driver can avoid having to explicitly wait for the signal to become
: stable and software has to cope with fewer events.  We've lived without
: it for quite some time, though.

David said:
: I looked at adding debounce support to the generic GPIO calls (and thus
: gpiolib) some time back, but decided against it.  I forget why at this
: time (check list archives) but it wasn't because of lack of utility in
: certain contexts.
:
: One thing to watch out for is just how variable the hardware capabilities
: are.  Atmel GPIOs have something like a fixed number of 32K clock cycles
: for debounce, twl4030 had something odd, OMAPs were more like the Atmel
: chips but with a different clock.  In some cases debouncing had to be
: ganged, not per-GPIO.  And so forth.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: David Brownell <david-b@pacbell.net>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:42 -07:00
Ben Dooks
796a8e423a gpiolib: make gpiochip_add() show a better error message
The current message, 'not registered' is confusing as it implies it was
not registered with something, whereas printing 'failed to register'
implies it was the gpiochip_add() call that did not work correctly.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:41 -07:00
Marc Zyngier
a13c1868aa gpio: max732x: fix input configuration for open-drain pins
Fix a bug I noticed while hacking on the max732x driver for interrupt
support.  According to the datasheets, open-drain pins have to be
configured as output-high (which in that case is actually high impedance)
to be used as input.

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:41 -07:00
Axel Lin
5535cb681c max732x: correct nr_port checking off by one error
Setup both client_group_a and client_group_b if nr_port > 8 (not including
nr_port==8).

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:41 -07:00
Axel Lin
c1cc9b9775 pl061: fix offset value range checking
The valid offset value is 0..PL061_GPIO_NR-1, this patch corrects the
offset value range checking.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:41 -07:00
Uwe Kleine-König
7cfe1395b2 gpiolib: a gpio is unsigned, so use %u to print it
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:41 -07:00
Uwe Kleine-König
62154991a8 gpiolib: make names array and its values const
gpiolib doesn't need to modify the names and I assume most initializers
use string constants that shouldn't be modified anyhow.

[akpm@linux-foundation.org: fix drivers/gpio/cs5535-gpio.c]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Kevin Wells <kevin.wells@nxp.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:41 -07:00
Marc Zyngier
a80a0bbee4 gpio: add interrupt handling capability to max732x
Most of the GPIO expanders supported by the max732x driver have interrupt
generation capability by reporting changes on input pins through an INT#
pin.  This patch implements the irq_chip functionnality (edge detection
only).

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Jebediah Huang <jebediah.huang@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:41 -07:00
Grant Likely
cf9b59e9d3 Merge remote branch 'origin' into secretlab/next-devicetree
Merging in current state of Linus' tree to deal with merge conflicts and
build failures in vio.c after merge.

Conflicts:
	drivers/i2c/busses/i2c-cpm.c
	drivers/i2c/busses/i2c-mpc.c
	drivers/net/gianfar.c

Also fixed up one line in arch/powerpc/kernel/vio.c to use the
correct node pointer.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22 00:36:56 -06:00
Eric W. Biederman
3ff195b011 sysfs: Implement sysfs tagged directory support.
The problem.  When implementing a network namespace I need to be able
to have multiple network devices with the same name.  Currently this
is a problem for /sys/class/net/*, /sys/devices/virtual/net/*, and
potentially a few other directories of the form /sys/ ... /net/*.

What this patch does is to add an additional tag field to the
sysfs dirent structure.  For directories that should show different
contents depending on the context such as /sys/class/net/, and
/sys/devices/virtual/net/ this tag field is used to specify the
context in which those directories should be visible.  Effectively
this is the same as creating multiple distinct directories with
the same name but internally to sysfs the result is nicer.

I am calling the concept of a single directory that looks like multiple
directories all at the same path in the filesystem tagged directories.

For the networking namespace the set of directories whose contents I need
to filter with tags can depend on the presence or absence of hotplug
hardware or which modules are currently loaded.  Which means I need
a simple race free way to setup those directories as tagged.

To achieve a reace free design all tagged directories are created
and managed by sysfs itself.

Users of this interface:
- define a type in the sysfs_tag_type enumeration.
- call sysfs_register_ns_types with the type and it's operations
- sysfs_exit_ns when an individual tag is no longer valid

- Implement mount_ns() which returns the ns of the calling process
  so we can attach it to a sysfs superblock.
- Implement ktype.namespace() which returns the ns of a syfs kobject.

Everything else is left up to sysfs and the driver layer.

For the network namespace mount_ns and namespace() are essentially
one line functions, and look to remain that.

Tags are currently represented a const void * pointers as that is
both generic, prevides enough information for equality comparisons,
and is trivial to create for current users, as it is just the
existing namespace pointer.

The work needed in sysfs is more extensive.  At each directory
or symlink creating I need to check if the directory it is being
created in is a tagged directory and if so generate the appropriate
tag to place on the sysfs_dirent.  Likewise at each symlink or
directory removal I need to check if the sysfs directory it is
being removed from is a tagged directory and if so figure out
which tag goes along with the name I am deleting.

Currently only directories which hold kobjects, and
symlinks are supported.  There is not enough information
in the current file attribute interfaces to give us anything
to discriminate on which makes it useless, and there are
no potential users which makes it an uninteresting problem
to solve.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:31 -07:00
Takashi Iwai
d71f4cece4 Merge branch 'topic/asoc' into for-linus
Conflicts:
	sound/soc/codecs/ad1938.c
2010-05-20 12:00:43 +02:00
Grant Likely
61c7a080a5 of: Always use 'struct device.of_node' to get device node pointer.
The following structure elements duplicate the information in
'struct device.of_node' and so are being eliminated.  This patch
makes all readers of these elements use device.of_node instead.

(struct of_device *)->node
(struct dev_archdata *)->prom_node (sparc)
(struct dev_archdata *)->of_node (powerpc & microblaze)

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-18 16:10:44 -06:00
Denis Turischev
3c904afd73 it8761e_gpio: fix bug in gpio numbering
The SIO chip contains 16 possible gpio lines, not 14.  The schematic was
not read carefully.

Signed-off-by: Denis Turischev <denis@compulab.co.il>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-11 17:33:41 -07:00
Linus Torvalds
8f2adb7cab Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6
* 'merge' of git://git.secretlab.ca/git/linux-2.6:
  spi: spidev_test gives error upon 1-byte transfer
  omap2_mcspi: small fixes of output data format
  omap2_mcspi: Flush posted writes
  spi: spi_device memory should be released instead of device.
  spi: release device claimed by bus_find_device_by_name
  of: check for IS_ERR()
  serial/mpc52xx_uart: Drop outdated comments
  gpio: potential null dereference
2010-04-30 09:57:55 -07:00
Linus Torvalds
6bec11921a Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6061/1: PL061 GPIO: Bug fix - setting gpio for HIGH_LEVEL interrupt is not working.
  ARM: 5957/1: ARM: RealView SD/MMC Card detection and write-protect using GPIOLIB
  ARM: 6030/1: KS8695: enable console
  ARM: 6060/1: PL061 GPIO: Setting gpio val after changing direction to OUT.
  ARM: 6059/1: PL061 GPIO: Changing *_irq_chip_data with *_irq_data for real irqs.
  ARM: 6023/1: update bcmring_defconfig to latest version and fix build error
  ARM: fix build error in arch/arm/kernel/process.c
2010-04-29 17:17:35 -07:00
viresh kumar
db7e1bc479 ARM: 6061/1: PL061 GPIO: Bug fix - setting gpio for HIGH_LEVEL interrupt is not working.
In current implementation of PL061, setting type of irq to HIGH_LEVEL is not
working. This patch fixes this bug.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-29 23:23:49 +01:00
Dan Carpenter
3913fd5ed4 gpio: potential null dereference
Smatch found a potential null dereference in gpio_setup_irq().  The
"pdesc" variable is allocated with idr_find() that can return NULL.  If
gpio_setup_irq() is called with 0 as gpio_flags and "pdesc" is null, it
would OOPs here.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-04-28 00:50:01 -06:00
Marc Zyngier
a2cb9aeb3c gpio: fix pca953x set_type 'scheduling while atomic' bug
Bill Gatliff reported the following bug when using the irq_chip facility
of the pca953x driver on a PPC platform:

BUG: scheduling while atomic: insmod/1530/0x00000002

He traced it back to an i2c transaction in pca953x_irq_set_type(), which
can be called with interrupt disabled (from __setup_irq()).  As the i2c
controller can sleep while sending a message, this qualifies as a bad
idea.

This patch moves the i2c transaction to pca953x_irq_bus_sync_unlock(),
where it is actually safe to send an i2c message.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Marc Zyngier <maz@misterjones.org>
Reported-by: Bill Gatliff <bgat@billgatliff.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-27 16:26:03 -07:00
viresh kumar
64b997c514 ARM: 6060/1: PL061 GPIO: Setting gpio val after changing direction to OUT.
pl061_direction_output doesn't set value of gpio to value passed to it.
This patch sets value of GPIO pin to requested value after changing direction
to OUT.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-22 12:30:14 +01:00
viresh kumar
9a99d55514 ARM: 6059/1: PL061 GPIO: Changing *_irq_chip_data with *_irq_data for real irqs.
PL061 driver is using set_irq_chip_data and get_irq_chip_data for real
irq lines. It must be using *_irq_data functions instead. As chip_data
is used by interrupt controllers also, which makes vic write at incorrect
addresses.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-22 12:30:13 +01:00
Julia Lawall
2a481800ca drivers/gpio/timbgpio.c: add missing unlock
In an error handling case the lock is not unlocked.  The return is
converted to a goto, to share the unlock at the end of the function.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression E1;
identifier f;
@@

f (...) { <+...
* spin_lock_irqsave (E1,...);
... when != E1
* return ...;
...+> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: <richard.rojfors@pelagicore.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:02 -07:00