Commit Graph

167506 Commits

Author SHA1 Message Date
Takashi Iwai
ccca7cdc1b ALSA: hda - Fix volume-knob setup for Dell laptops with STAC9228
The volume-knob widget needs to be set with 0x7f instead of 0xff
for Dell laptops with STAC9228 codec, too, like the previous commit.

Reference: Novell bnc#545013
	http://bugzilla.novell.com/show_bug.cgi?id=545013

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13 15:32:21 +02:00
Takashi Iwai
54930531a0 ALSA: hda - Fix mute sound with STAC9227/9228 codecs
On FSC laptops, the sound gets muted gradually when the volume is chnaged.
This is due to the wrong volume-knob widget setup.  The delta bit (bit 7)
shouldn't be set for these devices.

This patch adds a new quirk to set the value 0x7f to the widget 0x24
instead of 0xff.

Reference: Novell bnc#546006
	http://bugzilla.novell.com/show_bug.cgi?id=546006

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13 15:29:34 +02:00
Vincent Legoll
a003236c32 perf events: Update MAINTAINERS entry file patterns
Add file patterns that match relevant files for this subsystem.

Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com>
Cc: Linus Torvalds <torvalds@osdl.org>
Cc: paulus@samba.org
Cc: a.p.zijlstra@chello.nl
LKML-Reference: <4727185d0910130548p325f0185vf4e23b5491c730a0@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-13 15:28:52 +02:00
David S. Miller
c58543c869 sparc64: Set IRQF_DISABLED on LDC channel IRQs.
With lots of virtual devices it's easy to generate a lot of
events and chew up the kernel IRQ stack.

Reported-by: hyl <heyongli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13 00:49:09 -07:00
Takashi Iwai
9c6b8dcefe ALSA: bt87x - Add a whitelist for Pinnacle PCTV (11bd:0012)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13 09:34:28 +02:00
Jeremy Fitzhardinge
71999d9862 x86/paravirt: Use normal calling sequences for irq enable/disable
Bastian Blank reported a boot crash with stackprotector enabled,
and debugged it back to edx register corruption.

For historical reasons irq enable/disable/save/restore had special
calling sequences to make them more efficient.  With the more
recent introduction of higher-level and more general optimisations
this is no longer necessary so we can just use the normal PVOP_
macros.

This fixes some residual bugs in the old implementations which left
edx liable to inadvertent clobbering. Also, fix some bugs in
__PVOP_VCALLEESAVE which were revealed by actual use.

Reported-by: Bastian Blank <bastian@waldi.eu.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
Cc: Xen-devel <xen-devel@lists.xensource.com>
LKML-Reference: <4AD3BC9B.7040501@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-13 09:22:01 +02:00
Stephen M. Cameron
2ec24ff1d1 cciss: Add cciss_allow_hpsa module parameter
Add cciss_allow_hpsa module parameter.  This parameter causes
the cciss driver to ignore any Smart Array devices known to be
supported by the hpsa driver.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-13 09:18:22 +02:00
Stephen M. Cameron
2cfa948c9e cciss: Fix multiple calls to pci_release_regions
Fix multiple calls to pci_release_regions.  If cciss_pci_init
fails, it already does any necessary call to pci_release_regions,
so this does not need to be done again in cciss_init_one in that
case.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-13 09:18:22 +02:00
Takashi Iwai
2d9c648295 ALSA: hda - Fix overflow of spec->init_verbs in patch_realtek.c
ALC861-VD lenovo model causes overflow of spec->init_verbs entries due to
the recent changes.  Simply increase the array size to avoid the overflow.

Reported-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-10-13 08:06:55 +02:00
Li Zefan
8ad807318f tracing/filters: Fix memory leak when setting a filter
Every time we set a filter, we leak memory allocated by
postfix_append_operand() and postfix_append_op().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: <stable@kernel.org> # for v2.6.31.x
LKML-Reference: <4AD3D7D9.4070400@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-13 08:05:17 +02:00
Paul Mundt
9922262242 sh: ftrace: Fix up syscall tracepoint support.
Sync up with latest core changes in the syscalls tracing area:

- tracing: Map syscall name to number (syscall_name_to_nr())
- tracing: Call arch_init_ftrace_syscalls at boot
- tracing: add support tracepoint ids (set_syscall_{enter,exit}_id())

Taken from the s390 change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13 12:42:48 +09:00
Paul Mundt
964f7e5a56 sh: force dcache flush if dcache_dirty bit set.
This too follows the ARM change, given that the issue at hand applies to
all platforms that implement lazy D-cache writeback.

This fixes up the case when a page mapping disappears between the
flush_dcache_page() call (when PG_dcache_dirty is set for the page) and
the update_mmu_cache() call -- such as in the case of swap cache being
freed early. This kills off the mapping test in update_mmu_cache() and
switches to simply testing for PG_dcache_dirty.

Reported-by: Nitin Gupta <ngupta@vflare.org>
Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13 11:18:34 +09:00
Paul Mundt
af67c3a9e6 sh: update die() output.
This follows the ARM change, as SH had all of the same issues:

Make die() better match x86:
- add printing of the last accessed sysfs file
- ensure console_verbose() is called under the lock
- ensure we panic outside of oops_exit()

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13 10:57:52 +09:00
Jan Kara
6dbce52182 ext3: Update documentation about ext3 quota mount options
Signed-off-by: Jan Kara <jack@suse.cz>
2009-10-13 00:06:43 +02:00
Theodore Ts'o
96ec2e0a71 ext3: Don't update superblock write time when filesystem is read-only
This avoids updating the superblock write time when we are mounting
the root file system read/only but we need to replay the journal; at
that point, for people who are east of GMT and who make their clock
tick in localtime for Windows bug-for-bug compatibility, and this will
cause e2fsck to complain and force a full file system check.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-10-13 00:06:43 +02:00
Linus Torvalds
2caa731819 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: Prevent AER driver from being loaded on non-root port PCIE devices
  PCI: get larger bridge ranges when space is available
  PCI: pci.c: fix kernel-doc notation
  PCI quirk: TI XIO200a erroneously reports support for fast b2b transfers
  PCI PM: Read device power state from register after updating it
  PCI: remove pci_assign_resource_fixed()
  PCI: PCIe portdrv: remove "-driver" from driver name
2009-10-12 14:38:34 -07:00
Linus Torvalds
589bf8d52b Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (24 commits)
  ARM: force dcache flush if dcache_dirty bit set
  [ARM] pxa: workaround errata #37 by not using half turbo switching
  [ARM] pxamci: fix printing gpio numbers in pxamci_probe
  [ARM] pxa/csb726: adjust duplicate structure field initialization
  ARM: Add kmap_atomic type debugging
  ARM: boolean bit testing
  ARM: update die() output
  ARM: Dump code/mem oops lines with the appropriate log level
  ARM: Dump memory and backtrace as one printk per line
  ARM: 5756/1: ep93xx: introduce clk parent
  ARM: 5754/1: ep93xx: update i2c support
  ARM: 5753/1: ep93xx: remove old EP93XX_GPIO_* defines
  ARM: 5729/1: ep93xx: define EP93XX_*_PHYS_BASE with macros
  ARM: 5751/1: ep93xx/micro9: Add Micro9-Slim
  ARM: 5750/1: ep93xx/micro9: Update platform code
  ARM: 5749/1: ep93xx/micro9: Update maintainer
  ARM: 5752/1: SA1100: fix building of h3100
  ARM: 5748/1: bcmring: fix build warning messages
  ARM: 5747/1: Fix the start_pg value in free_memmap()
  ARM: 5746/1: Handle possible translation errors in ARMv6/v7 coherent_user_range
  ...
2009-10-12 14:37:49 -07:00
Mike Frysinger
e3c6f15fec USB: musb: invert arch depend string
The MUSB code relies on platform implementations that currently only
exists for Arm and Blackfin processors, so have the MUSB Kconfig depend
upon those arches.

This should prevent other arches from building MUSB via randconfig.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-12 14:36:28 -07:00
Ingo Molnar
c7cedb125b Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into core/urgent 2009-10-12 23:26:36 +02:00
Ashwin Chaugule
63c9e01e1a perf tools: Remove static debugfs path from parse-events
Timechart doesn't work if debugfs is not in /sys/kernel/debug/.
Fixed by using global debugfs_path which is filled in by perf.

Signed-off-by: Ashwin Chaugule <ashwinc@quicinc.com>
Cc: "Arjan van de Ven" <arjan@linux.intel.com>
LKML-Reference: <a751bdc6978478de6d10440e587a2cc7.squirrel@www.codeaurora.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-12 22:41:05 +02:00
H. Peter Anvin
d1705c558c x86: fix kernel panic on 32 bits when profiling
Latest kernel has a kernel panic in booting on i386 machine when
profile=2 setting in cmdline.  It is due to 'sp' being incorrect in
profile_pc().

BUG: unable to handle kernel NULL pointer dereference at 00000246
IP: [<c01288b6>] profile_pc+0x2a/0x48
*pde = 00000000
Oops: 0000 [#1] SMP

This differs from the original version by Alex Shi in that we use the
kernel_stack_pointer() inline already defined in <asm/ptrace.h> for
this purpose, instead of #ifdef.

Originally-by: Alex Shi <alex.shi@intel.com>
Cc: "Chen, Tim C" <tim.c.chen@intel.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-10-12 11:53:51 -07:00
Stefan Richter
a1be9eee29 NFS: suppress a build warning
struct sockaddr_storage * can safely be used as struct sockaddr *.
Suppress an "incompatible pointer type" warning.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-12 10:25:12 -07:00
Linus Torvalds
eea7e17e0e tty, serial: Fix race and NULL check in uart_close()
Commit 46d57a449a ("serial: use tty_port pointers in the core code")
contained two bugs that causes (rare) crashes:

 - the rename typoed one site

 - a NULL check was missed

Reported-and-tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Greg KH <gregkh@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-12 10:21:33 -07:00
Nitin Gupta
787b2faadc ARM: force dcache flush if dcache_dirty bit set
On ARM, update_mmu_cache() does dcache flush for a page only if
it has a kernel mapping (page_mapping(page) != NULL). The correct
behavior would be to force the flush based on dcache_dirty bit only.

One of the cases where present logic would be a problem is when
a RAM based block device[1] is used as a swap disk. In this case,
we would have in-memory data corruption as shown in steps below:

do_swap_page()
{
    - Allocate a new page (if not already in swap cache)
    - Issue read from swap disk
        - Block driver issues flush_dcache_page()
        - flush_dcache_page() simply sets PG_dcache_dirty bit and does not
          actually issue a flush since this page has no user space mapping yet.
    - Now, if swap disk is almost full, this newly read page is removed
      from swap cache and corrsponding swap slot is freed.
    - Map this page anonymously in user space.
    - update_mmu_cache()
        - Since this page does not have kernel mapping (its not in page/swap
          cache and is mapped anonymously), it does not issue dcache flush
          even if dcache_dirty bit is set by flush_dcache_page() above.

    <user now gets stale data since dcache was never flushed>
}

Same problem exists on mips too.

[1] example:
 - brd (RAM based block device)
 - ramzswap (RAM based compressed swap device)

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-12 17:52:26 +01:00
Jan Beulich
7a4b7e5e74 x86: Fix Suspend to RAM freeze on Acer Aspire 1511Lmi laptop
Move the trampoline and accessors back out of .cpuinit.* for the
case of 64-bits+ACPI_SLEEP.

This solves s2ram hangs reported in:

  http://bugzilla.kernel.org/show_bug.cgi?id=14279

Reported-and-bisected-by: Christian Casteyde <casteyde.christian@free.fr>
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: <bugzilla-daemon@bugzilla.kernel.org>
Cc: "Andrew Morton" <akpm@linux-foundation.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-12 18:06:48 +02:00
David Woodhouse
9a821b2316 x86: Move pci_iommu_init to rootfs_initcall()
We want this to happen after the PCI quirks, which are now running at
the very end of the fs_initcalls.

This works around the BIOS problems which were originally addressed by
commit db8be50c43 ('USB: Work around BIOS
bugs by quiescing USB controllers earlier'), which was reverted in
commit d93a8f829f.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-10-12 14:42:11 +01:00
David Woodhouse
cf6f3bf7e5 Run pci_apply_final_quirks() sooner.
Having this as a device_initcall() means that some real device drivers
can actually initialise _before_ the quirks are run, which is wrong.

We want it to run _before_ device_initcall(), but _after_ fs_initcall(),
since some arch-specific PCI initialisation like pcibios_assign_resources()
is done at fs_initcall().

We could use rootfs_initcall() but I actually want to use that for the
IOMMU initialisation, which has to come after the quirks, but still
before the real devices. So use fs_initcall_sync() instead -- since this
is entirely synchronous, it doesn't hurt that it'll escape the
synchronisation.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-10-12 14:42:09 +01:00
David Woodhouse
0001026884 Mark pci_apply_final_quirks() __init rather than __devinit
It doesn't get invoked on hotplug; it can be thrown away after init.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-10-12 14:42:06 +01:00
David Woodhouse
8d86fb2c80 Rename pci_init() to pci_apply_final_quirks(), move it to quirks.c
This function may have done more in the past, but all it does now is
apply the PCI_FIXUP_FINAL quirks. So name it sensibly and put it where
it belongs.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-10-12 14:42:04 +01:00
Russell King
edc72786d2 Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2009-10-12 14:38:08 +01:00
Roger Quadros
f8ebdff087 mfd: Fix twl4030 boot with twl4030 usb transceiver enabled
The usb regulator supplies (usb1v5, usb1v8 & usb3v1) must be available
before adding the twl4030_usb child, else twl4030_usb_ldo_init() will
always fail thus causing boot lock-up.

This patch fixes boot on OMAP systems using the twl4030 usb transceiver.
CONFIG_TWL4030_USB=y

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-10-12 15:19:23 +02:00
David S. Miller
1a78cedb99 sparc64: Fix D-cache flushing on swapin from SW devices.
Thanks to tip form ARM folks and Russell King.

If flush_dcache_page() occurs on a swapin it will have a mapping
and we'll try to defer the flush by setting the dirty bit.

But when it hits update_dcache_page() we won't flush because the
page won't have a mapping any more.  So remove the mapping
requirement in flush_dcache().

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12 03:20:57 -07:00
Jiri Kosina
b0e14951ee HID: fix possible deadlock in hidraw_read
If the loop in hidraw_read() loops more than once, then we might
end up trying to acquire already locked mutex, casuing a deadlock.

Reported-by: iceberg <iceberg@ispras.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-10-12 11:25:56 +02:00
Randy Dunlap
e17b38bf9e sched: Fix missing kernel-doc notation
The following htmldocs warnings:

  Warning(kernel/sched.c:685): No description found for parameter 'cpu'
  Warning(kernel/sched.c:3676): No description found for parameter 'sd'

Trigger because new parameters were added to update_rq_clock() and
update_group_power() without updating the kernel-doc notation.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4AD29070.7070002@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-12 10:50:06 +02:00
Tejun Heo
1a0c3298d6 percpu: fix compile warnings
Fix the following two compile warnings which show up on i386.

mm/percpu.c:1873: warning: comparison of distinct pointer types lacks a cast
mm/percpu.c:1879: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'size_t'

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
2009-10-12 17:04:42 +09:00
Ingo Molnar
55621ccf2b perf tools: Fix the NO_64BIT build on pure 64-bit systems
Randy Dunlap reported that 'make NO_64BIT=1' fails to build
a pure 32-b it binary on 64-bit/64-bit x86 systems.

The reason is that we dont pass in the -m32 and GCC defaults
to -m64.

So pass it in - and also extend the warning message about libelf
dependencies - glibc-dev[el] is needed as well beyond the libelf
library.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: Message-Id: <20091005131729.78444bfb.randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-12 10:00:27 +02:00
Dennis O'Brien
4367216a09 [ARM] pxa: workaround errata #37 by not using half turbo switching
PXA27x Errata #37 implies system will hang when switching into or out of
half turbo (HT bit in CLKCFG) mode, workaround this by not using it.

Signed-off-by: Dennis O'Brien <dennis.obrien@eqware.net>
Cc: stable-2.6.31 <stable@kernel.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 15:30:50 +08:00
Antonio Ospite
48f029542f [ARM] pxamci: fix printing gpio numbers in pxamci_probe
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 15:30:50 +08:00
Julia Lawall
c639ef4317 [ARM] pxa/csb726: adjust duplicate structure field initialization
Currently the irq_type field of the csb726_lan_config structure is
initialized twice.  The value in the first case,
SMSC911X_IRQ_POLARITY_ACTIVE_LOW, is normally stored in the irq_polarity
field, so I have renamed the field in the first initialization to that.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-12 15:30:50 +08:00
Randy Dunlap
cbef79a82a perf tools: Fix const char type propagation
The following perf build warnings/errors in function
argument types:

  builtin-sched.c:1894: warning: passing argument 1 of 'sort_dimension__add' discards qualifiers from pointer target type
  util/trace-event-parse.c:685: warning: passing argument 2 of 'read_expected' discards qualifiers from pointer target type
  util/trace-event-parse.c:741: warning: passing argument 4 of 'test_type_token' discards qualifiers from pointer target type
  util/trace-event-parse.c:706: warning: passing argument 2 of 'read_expected_item' discards qualifiers from pointer target type

... trigger because older GCC is not able to prove that
sort_dimension__add() does not change the string.

Some goes for test_type_token().

Fix this by improving type consistency.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091005131729.78444bfb.randy.dunlap@oracle.com>
[ Also remove ugly type cast now unnecessary. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-12 08:35:00 +02:00
Randy Dunlap
c7ebf0657b blk-settings: fix function parameter kernel-doc notation
Fix kernel-doc notation in blk-settings.c::blk_queue_max_discard_sectors().

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-12 08:20:47 +02:00
Linus Torvalds
d93a8f829f Revert "USB: Work around BIOS bugs by quiescing USB controllers earlier"
This reverts commit db8be50c43, as per

	http://bugzilla.kernel.org/show_bug.cgi?id=14374
	http://marc.info/?l=linux-kernel&m=125446885705223&w=4

We simply can't do the USB handoff at FIXUP_HEADER time, since it will
often require us to have valid IO mappings etc.  But that in turn
requires a whole different approach, not this trivial one-liner.

Maybe we could teach all the USB quirk handoff handlers to only do the
quirk if the device has all its registers set up (since if it isn't
initialized, it's unlikely to be active), but regardless that will need
a whole lot more code than just saying "let's do it really early".

The proper fix is almost certainly to just leave the legacy IOMMU
mappings active until after all devices have been initialized.

Reported-by: Nick Piggin <npiggin@suse.de>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-11 15:57:57 -07:00
Linus Torvalds
161291396e Linux 2.6.32-rc4 2009-10-11 14:43:56 -07:00
Yinghai Lu
15b812f1d0 pci: increase alignment to make more space for hidden code
As reported in

	http://bugzilla.kernel.org/show_bug.cgi?id=13940

on some system when acpi are enabled, acpi clears some BAR for some
devices without reason, and kernel will need to allocate devices for
them.  It then apparently hits some undocumented resource conflict,
resulting in non-working devices.

Try to increase alignment to get more safe range for unassigned devices.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-11 14:43:36 -07:00
Sam Ravnborg
2331d1a6cd kbuild: revert "save ARCH & CROSS_COMPILE ..."
Revert commit 575543347b

It caused following issues:

- On architectures where ARCH= setting is used to select between
  32 and 64 bit this was no longer possible without "make mrproper"
- If ARCH was changed then kbuild refused to run "make mrproper"
  because ARCH had changed
- When CROSS_COMPILE was changed people were asked to run "make mrproper"
  but kbuild refused to run "make mrproper" because CROSS_COMPILE changed.
- Spaces in CROSS_COMPILE was not 'supported'
- If an non-existing ARCH= was used kbuild could get stuck

Lessons learned:
. Despite being simple and straghtforward people uses very different
  approaches when building the kernel.

. CROSS_COMPILE is sometimes used for ccache despite cache being
  only a CC frontend so one would have expected CC to be
  used for this purpose.

. And obviously this was not tested widely enough.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
2009-10-11 23:22:58 +02:00
Arnd Bergmann
c01226c314 warn about use of uninstalled kernel headers
User applications frequently hit problems when they try to use
the kernel headers directly, rather than the exported headers.

This adds an explicit warning for this case, and points to
a URL holding an explanation of why this is wrong and what
to do about it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-10-11 23:21:25 +02:00
Felipe Contreras
17c5ca9883 kbuild: mkcompile_h: trivial cleanups
UTS_TRUNCATTE is simpler this way, and now editors idetify this as a
shell script.

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-10-11 23:21:25 +02:00
Felipe Contreras
9c3049c02c kbuild: fix warning when domainname is not available
Otherwise we get:
"dnsdomainname: Unknown host"

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-10-11 23:21:25 +02:00
Alek Du
58242b2b06 kbuild: Fix size_append issue for bzip2/lzma kernel
The Makefile.lib will call "echo -ne" to append uncompressed kernel size to
bzip2/lzma kernel image.
The "echo" here depends on the shell that /bin/sh pointing to.
On Ubuntu system, the /bin/sh is pointing to dash, which does not support
"echo -e" at all. Use /bin/echo instead of shell echo should always be safe.

Signed-off-by: Alek Du <alek.du@intel.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-10-11 23:21:25 +02:00
Amerigo Wang
a3ee9470e6 kbuild,scripts: use non-builtin echo for '-e'
Alek reported that on Ubuntu, where dash is used, 'echo -e'
can't work, so let's use non-builtin echo in this case.

Reported-by: Alek Du <alek.du@intel.com>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-10-11 23:21:25 +02:00