Commit Graph

166 Commits

Author SHA1 Message Date
Roman Zippel
5a1aa8a1af kconfig: add named choice group
As choice dependency are now fully checked, it's quite easy to add support
for named choices. This lifts the restriction that a choice value can only
appear once, although it still has to be within the same group,
but multiple choices can be joined by giving them a name.
While at it I cleaned up a little the choice type logic to simplify it a
bit.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-28 23:05:48 +02:00
Roman Zippel
4898117886 kconfig: fix choice dependency check
Properly check the dependency of choices as a group.
Also fix that sym_check_deps() correctly terminates the dependency loop
error check (otherwise it would continue printing the dependency chain).

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-28 23:04:57 +02:00
Roel Kluin
79d6e539df kconfig: reversed borderlines in inputbox
Fix reversal of dlg.border.atr and dlg.dialog.atr for draw_box()
Makes the inputbox look like expected

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-28 22:27:26 +02:00
Sam Ravnborg
4217516e52 kconfig: fix broken target update-po-config
Massimo Maiurana reported:
In the latest kernel "make update-po-config" fails because it tries
to open arch/Kconfig/Kconfig, since the ls command doesn't
distinguish between files and directories.

Cc: Massimo Maiurana <maiurana@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-25 21:15:41 +02:00
Roman Zippel
587c90616a kconfig: fix select in combination with default
> The attached .config (with current -git) results in a compile
> error since it contains:
>
> CONFIG_X86=y
> # CONFIG_EMBEDDED is not set
> CONFIG_SERIO=m
> CONFIG_SERIO_I8042=y
>
> Looking at drivers/input/serio/Kconfig I simply don't get how this
> can happen.

You've hit the rather subtle rules of select vs default. What happened is
that SERIO is selected to m, but SERIO_I8042 isn't selected so the default
of y is used instead.
We already had the problem in the past that select and default don't work
well together, so this patch cleans this up and makes the rule hopefully
more straightforward. Basically now the value is calculated like this:

	(value && dependency) || select

where the value is the user choice (if available and the symbol is
visible) or default.

In this case it means SERIO and SERIO_I8042 are both set to y due to their
default and if SERIO didn't had the default, then the SERIO_I8042 value
would be limited to m due to the dependency.

I tested this patch with more 10000 random configs and above case is the
only the difference that showed up, so I hope there is nothing that
depended on the old more complex and subtle rules.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Tested-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-13 22:30:09 +01:00
Sam Ravnborg
603d49885e kconfig: ignore select of unknown symbol
We have had warnings for a long time about select of unknow symbol
but the warnings does not really makes sense since we may
select a symbol that is relevant and defined in one
arch but not in another arch.
And as long as we do not use a common set of Kconfig files
for all archs lets just ignore this case.

Previously we have used this to find bad uses of
select but we need a more relaible method to do so.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-02-03 08:58:07 +01:00
Sam Ravnborg
36ef805bd5 kconfig: mark config as changed when loading an alternate config
Michal Zachar <mgzachar@mail.t-com.sk> reported that
menuconfig did not save the new config when loading
an alternate config unless he altered it manually.

Mark config as changed upon load of alternate config fixed this.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Roman Zippel <zippel@linux-m68k.org>
2008-02-03 08:58:07 +01:00
Jan Beulich
f5eaa323eb kconfig: tristate choices with mixed tristate and boolean values
Change kconfig behavior so that mixing bool and tristate config
settings in a choice is possible and has the desired effect of offering
just the tristate options individually if the choice gets set to M, and
a normal boolean selection if the choice gets set to Y.

Also fix scripts/kconfig/conf's handling of children of choice values -
there may be more than one immediate child, and all of them need to be
processed.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: "Roman Zippel" <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Adrian Bunk
9649ef878d kconfig: remove "enable"
Kconfig had a synonym "enable" for "select" that was neither documented
nor used.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Roman Zippel
80daa56008 kconfig: use environment option
Use the environment option to provide the ARCH symbol
and the KERNELVERSION symbol.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:39 +01:00
Roman Zippel
93449082e9 kconfig: environment symbol support
Add the possibility to import a value from the environment into kconfig
via the option syntax. Beside flexibility this has the advantage
providing proper dependencies.
Documented the options syntax.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:39 +01:00
Roman Zippel
7a96292335 kconfig: explicitly introduce expression list
Rename E_CHOICE to E_LIST to explicitly add support for expression
lists. Add a helper macro expr_list_for_each_sym to more easily iterate
over the list.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:39 +01:00
EGRY Gabor
0ffce8d944 kconfig: gconfig: symbol fix
Gettext support for symbol names are unnecessary.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:39 +01:00
EGRY Gabor
534a450c38 kconfig: gettext support for config
Gettext support for conf.c

[Include locale.h by Kyle].

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
2008-01-28 23:14:39 +01:00
EGRY Gabor
75c0a8a55c kconfig: gettext support for lxdialog
Gettext support for lxdialog.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:39 +01:00
EGRY Gabor
413f006bab kconfig: gettext support for menuconfig
Full gettext support for menuconfig.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:39 +01:00
EGRY Gabor
c21a2d9589 kconfig: gettext support for xconfig
Full gettext support for xconfig.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:39 +01:00
EGRY Gabor
01771b0fef kconfig: macro fix in menu.c
This patch removes the indirect I18N support for config file.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:39 +01:00
EGRY Gabor
46d2631978 kconfig: gettext support for gconfig
Gettext support for menu and toolbar.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:39 +01:00
EGRY Gabor
bb7ef3905a kconfig: missing macros in gconfig
This patch adds missing gettext macros.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:38 +01:00
EGRY Gabor
f7a4b4cdc2 kconfig: whitespace removing
This patch removes the unnecessary whitespaces from
end of help lines of Kconfig files.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:38 +01:00
EGRY Gabor
1020026f99 kconfig: update-po-config info
This patch adds tracking messages.

Signed-off-by: Egry Gabor <gaboregry1@t-online.hu>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:38 +01:00
Ladislav Michl
07f7668858 kconfig: use C89 random functions in conf.c
rand and srand functions conform also to C89 in addition to POSIX.1-2001,
which makes them a bit more portable (work also on MinGW host). Linux man
page also says:
"The versions of rand() and srand() in the Linux C Library use the same
random number generator as random() and srandom()".

* Use C89 conformant functions rand() and srand()

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:38 +01:00
Ladislav Michl
75ff4309cd kconfig: fix whitespace and sort includes in conf.c
Sort includes and remove leading whitespace.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org
2008-01-28 23:14:38 +01:00
Sam Ravnborg
de83cf148a kconfig: delete unused FILE_ and SYMBOL_ flags
The *_PRINTED flags were never used - so delete them.
Do we need them later then we can re-add them.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:38 +01:00
Sam Ravnborg
d6ee35764f kconfig: rename E_OR & friends to avoid name clash
We had macros named the same as a set of enumeration values.
It is legal code but very confusing to read - so rename
the macros from E_* to EXPR_*

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:38 +01:00
Jan Engelhardt
d84876f9f8 kconfig: allow overriding symbols
Allow config variables in .config to override earlier ones in the same
file. In other words,

	# CONFIG_SECURITY is not defined
	CONFIG_SECURITY=y

will activate it. This makes it a bit easier to do

cat original-config myconfig myconfig2 ... >.config;
and run *config as expected.

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
2008-01-28 23:14:37 +01:00
Ladislav Michl
09af091f50 kconfig: make kconfig MinGW friendly
Kconfig is powerfull tool. So powerfull that more and more software
projects are using it for configuration. So instead of fixing some of
them one by one, lets fix it in kernel and wait for sync.

This work was originaly done for PTXdist - GPL licensed build system for
userlands and cross-compilers, but it will not hurt kernel kconfig
either. PTXdist menuconfig now works on Windows linked with PDCurses and
compiled using MinGW - there is no termios and signals.

* Do not include <sys/wait.h> and <signal.h> (comes from times when
  lxdialog was separate process)
* Do not mess with termios directly and let curses tell screen size.
  Comment to commit c8dc68ad0f says
  check for screen size could be removed later, but because it didn't
  happen for more than year I left it here as well.
* Save cursor position added by Sam

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:37 +01:00
Andres Salomon
2f4b489b77 kconfig: use getopt() in conf.c for handling command line arguments
Switch from doing our own parsing of command line arguments to
using getopt(3) to do it.  Aside from simplifying things, this allows us to
specify multiple arguments; the old code could only accept two arguments
(input_mode and kconfig name).

Note some subtle changes:
 - The argument '-?' is no longer supported.
 - '-h' is not treated as an error, so output goes to stdout, and we
   exit with '0'.
 - There is no compatibility checking amongst arguments; the last option
   will simply override earlier options.  For example, 'conf -n -y foo'
   is perfectly valid now (input_mode will be set_yes).  Previously, that
   would have been an error ("can't find file -y").

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28 23:14:36 +01:00
Sam Ravnborg
6e588f6dcf kconfig: if ncurses-devel is missing then say so
With this patch when ncurses-devel (or whatever it is named)
is missing trying to run menuconfig will result in this:

$ make menuconfig
  HOSTCC  scripts/kconfig/conf.o
  HOSTCC  scripts/kconfig/kxgettext.o
 *** Unable to find the ncurses libraries or the
 *** required header files.
 *** 'make menuconfig' requires the ncurses libraries.
 ***
 *** Install ncurses (ncurses-devel) and try again.
 ***
make[1]: *** [scripts/kconfig/dochecklxdialog] Error 1
make: *** [menuconfig] Error 2

Much better than before where we just listed some build errors.
The other *config targets will work indepenednt on ncurses
being present or not.

Includes improvements suggested by: Frans Pop <elendil@planet.nl>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Frans Pop <elendil@planet.nl>
2008-01-28 23:14:36 +01:00
Paul Mundt
870e6f7e15 kconfig: obey KCONFIG_ALLCONFIG choices with randconfig.
Currently when using KCONFIG_ALLCONFIG with randconfig the choice options
are clobbered.  As recommended by Roman, this adds an is_new test to see
whether to select a new option or obey the existing one.

This is a resend of the earlier patch a couple of weeks ago, since there
was no reply.  Original thread is at http://lkml.org/lkml/2007/11/28/94

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-23 12:54:37 -08:00
Sam Ravnborg
6840999b19 x86: simplify "make ARCH=x86" and fix kconfig all.config
Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in
all.config.

For a fix the diffstat is nice:
 6 files changed, 3 insertions(+), 36 deletions(-)

The patch reverts these commits:
 - 0f855aa64b ("kconfig: add helper to set
   config symbol from environment variable")
 - 2a113281f5 ("kconfig: use $K64BIT to
   set 64BIT with all*config targets")

Roman Zippel pointed out that kconfig supported string compares so
the additional complexity introduced by the above two patches were
not needed.

With this patch we have following behaviour:

  # make {allno,allyes,allmod,rand}config [ARCH=...]
  option \ host arch      | 32bit         | 64bit
  =====================================================
  ./.                     | 32bit         | 64bit
  ARCH=x86                | 32bit         | 32bit
  ARCH=i386               | 32bit         | 32bit
  ARCH=x86_64             | 64bit         | 64bit

The general rule are that ARCH= and native architecture takes
precedence over the configuration.

So make ARCH=i386 [whatever] will always build a 32-bit kernel
no matter what the configuration says.  The configuration will
be updated to 32-bit if it was configured to 64-bit and the
other way around.

This behaviour is consistent with previous behaviour so no
suprises here.

make ARCH=x86 will per default result in a 32-bit kernel but as
the only ARCH= value x86 allow the user to select between 32-bit
and 64-bit using menuconfig.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Herrmann <aherrman@arcor.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-17 08:35:43 -08:00
Sam Ravnborg
daa93fab82 x86: enable "make ARCH=x86"
After unification of the Kconfig files and
introducing K64BIT support in kconfig
it required only trivial changes to enable
"make ARCH=x86".

With this patch you can build for x86_64 in several ways:
1) make ARCH=x86_64
2) make ARCH=x86 K64BIT=y
3) make ARCH=x86 menuconfig
   => select 64-bit

Likewise for i386 with the addition that
i386 is default is you say ARCH=x86.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12 21:02:20 +01:00
Sam Ravnborg
2a113281f5 kconfig: use $K64BIT to set 64BIT with all*config targets
The variable K64BIT can now be used to select the
value of CONFIG_64BIT.

This is for example useful for powerpc to generate
allmodconfig for both bit sizes - like this:
make ARCH=powerpc K64BIT=y
make ARCH=powerpc K64BIT=n

To use this the Kconfig file must use "64BIT" as the
config value to select between 32 and 64 bit.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-12 21:02:20 +01:00
Sam Ravnborg
0f855aa64b kconfig: add helper to set config symbol from environment variable
Add conf_set_env_sym() that can set an already defined symbol
based on the value of an environment variable.

Unknown symbols are silently ignored.
A warning is printed if the value of the environment variable
is unexpected.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-12 21:02:20 +01:00
Sam Ravnborg
9c900a9c9d kconfig: factor out code in confdata.c
This patch introduce no functional changes.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-12 21:02:19 +01:00
Sam Ravnborg
47572387d5 x86: move i386 and x86_64 Kconfig files to x86 directory
After a small change in kconfig Makefile we could
move all x86 Kconfig files to x86 directory.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25 22:37:02 +02:00
Sam Ravnborg
e703f75d62 kconfig: small code refactoring in kconfig Makefile
Do not hardcode the arch/$(ARCH)/Kconfig name all over

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25 22:35:18 +02:00
Sam Ravnborg
2266cfd50d x86: move defconfig files for i386 and x86_64 to x86
With some small changes to kconfig makefile we can now
locate the defconfig files for i386 and x86_64 in
the configs/ subdirectory under x86.
make ARCH=i386 defconfig and make defconfig
works as expected also after this change.
But arch maintainers shall now update a defconfig file in
the configs/ directory.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25 22:27:41 +02:00
Randy Dunlap
a54bb701c2 kconfig: set title bar in xconfig
Put kernel version info on title bar in xconfig (qconf) instead of
defaulting to "qconf".

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-20 20:16:50 +02:00
Linus Torvalds
e8b8c97773 Revert "kconfig: tristate choices with mixed tristate and boolean values"
This reverts commit a5bf3d891a.

David Brownell notes that this causes a regression visible in the
drivers/usb/gadget Kconfig file:

  "That Kconfig hasn't changed (other than adding new drivers), and it's
   worked that way for several years now ...  so the issue seems to be
   changes in menuconfig/kconfig/etc semantics.

   The issue is that when USB_GADGET=m, it's no longer possible to
   configure peripheral controller drivers as modules ...  the
   controller drivers can now only be configured for static linkage.

   It should be making a choice of one of the controller drivers which
   could work on the target system, and allow that driver to be linked
   either as a module (ok iff USB_GADGET=m) or statically."

Reverting this commit resolves the problem, and also fixes a second
problem that David noticed: various dependent options couldn't be enabled.

Tested-and-reported-by: David Brownell <david-b@pacbell.net>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Jan Beulich <jbeulich@novell.com>,
Cc: Andrew Morton <akpm@linux-foundation.org>,
Cc: Sam Ravnborg <sam@ravnborg.org>,
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 21:25:45 -07:00
Rob Landley
e9e40e143c kconfig: comment typo in scripts/kconfig/Makefile.
Typo in comment in scripts/kconfig/Makefile.

Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-18 14:31:50 +02:00
Matej Laitl
b5d609dbfa kconfig/menuconfig: distinguish between selected-by-another options and comments
menuconfig currently represents options implied by another option ('select'
directive in Kconfig) by prefixing them with '---'.  Unfortunately the same
notation is used for comments.  If the implied option is module capable,
user can still switch between Y and M, all without any feedback until she
visits option's help.  (try saying M to MAC80211 and then toggling
CFG80211)

This patch changes notation of selected-by-another items by introducing 2
new representations for implied options: {*} or {M} for options selected by
another modularized one, thus builtin or module capable, -*- or -M- for
options that cannot be at the moment changed by user.

The idea is to represent actual capability of the option by braces (dashes)
around and to always report actual state by * or M inside.

Signed-off-by: Matej Laitl <strohel@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:20:33 +02:00
Jan Beulich
a5bf3d891a kconfig: tristate choices with mixed tristate and boolean values
Change kconfig behavior so that mixing bool and tristate config settings in
a choice is possible and has the desired effect of offering just the
tristate options individually if the choice gets set to M, and a normal
boolean selection if the choice gets set to Y.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:20:33 +02:00
Sam Ravnborg
14f31562db kbuild: update _shipped files for kconfig syntax cleanup
Update _shipped files so regular user does not
need to have bison/flex/gperf installed.
Code changes were contained in previous commit.

Used following program versions (on fedora):
bison (GNU Bison) 2.3
flex 2.5.33
GNU gperf 3.0.2

Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:20:32 +02:00
Adrian Bunk
247537b9a2 kconfig: syntax cleanup - drop support for "depends/requires/def_boolean"
Remove the following redundant and never or rarely used kconfig syntax:

- "def_boolean" (same as "def_bool")
- "requires" (same as "depends on")
- "depends" (same as "depends on")

This patch contains the code changes and Kconfig updates.
The shipped files are in next patch to let actual codechange stand out.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:20:32 +02:00
Sam Ravnborg
a67cb1319f kconfig: fix segv fault in menuconfig
With specific configurations requesting help for certain
menu lines caused menuconfig to crash.
This was tracked down to a null pointer bug.
Thanks to "Miles Lane" <miles.lane@gmail.com> for inital reporting
and to Gabriel C <nix.or.die@googlemail.com> for the backtrace
that helped me locating the bug.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:32 +02:00
Sam Ravnborg
48874077dd kconfig: make comments stand out in menuconfig
Matěj Laitl <strohel@gmail.com> noticed that there was no way
to distingush between comments and un-selectable menu lines.
This patch marks comments with *** comment ***

Cc: Matěj Laitl <strohel@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:32 +02:00
Sam Ravnborg
aa1e5ef5c1 kbuild: check if we can link gettext not just compile
cygwin provides the header file but the lib file needs
to be added manually. A generic fix is to check if
we can compile and link a program that uses gettext()
and if it fails fall back to NO_NLS.

International users of cygwin may have to specify
HOST_LOADLIBES := "-lintl" on the make command line.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:13:50 +02:00
Roman Zippel
f82f3f9422 kconfig: oldconfig shall not set symbols if it does not need to
Avoid setting the value if the symbol doesn't need to be changed or can't
be changed. Later choices may change the dependencies and thus the
possible input range.

make oldconfig from a 2.6.22 .config with CONFIG_HOTPLUG_CPU not set
was in some configurations setting CONFIG_HOTPLUG_CPU=y without asking,
even when there was no actual requirement for CONFIG_HOTPLUG_CPU.
This was triggered by SUSPEND_SMP that does a select HOTPLUG_CPU.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Tested-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-09-01 08:24:09 +02:00