Commit Graph

940 Commits

Author SHA1 Message Date
Linus Torvalds
1e24b15b26 Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
  md: raid10: wake up frozen array
  md: do not count blocked devices as spares
  md: do not progress the resync process if the stripe was blocked
  md: delay notification of 'active_idle' to the recovery thread
  md: fix merge error
  md: move async_tx_issue_pending_all outside spin_lock_irq
2008-08-01 11:56:07 -07:00
Linus Torvalds
b17b3d479c Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  md: the bitmap code needs to use blk_plug_device_unlocked()
  block: add a blk_plug_device_unlocked() that grabs the queue lock
2008-08-01 11:46:00 -07:00
Jens Axboe
93769f5807 md: the bitmap code needs to use blk_plug_device_unlocked()
It doesn't hold the queue lock, so it's both racey on the queue flags
and thus spews a warning.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-08-01 20:32:31 +02:00
Al Viro
d5686b444f [PATCH] switch mtd and dm-table to lookup_bdev()
No need to open-code it...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-08-01 11:25:31 -04:00
Arthur Jones
388667bed5 md: raid10: wake up frozen array
When rescheduling a bio in raid10, we wake up
the md thread, but if the array is frozen, this
will have no effect.  This causes the array to
remain frozen for eternity.  We add a wake_up
to allow the array to de-freeze.  This code is
nearly identical to the raid1 code, which has
this fix already.

Signed-off-by: Arthur Jones <ajones@riverbed.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2008-08-01 12:55:14 +10:00
Dan Williams
e542713529 md: do not count blocked devices as spares
remove_and_add_spares() assumes that failed devices have been hot-removed
from the array.  Removal is skipped in the 'blocked' case so do not count a
device in this state as 'spare'.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-28 17:52:44 -07:00
Dan Williams
df10cfbc4d md: do not progress the resync process if the stripe was blocked
handle_stripe will take no action on a stripe when waiting for userspace
to unblock the array, so do not report completed sectors.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-28 17:52:37 -07:00
Hannes Reinecke
ae11b1b36d [SCSI] scsi_dh: attach to hardware handler from dm-mpath
multipath keeps a separate device table which may be
more current than the built-in one.
So we should make sure to always call ->attach whenever
a multipath map with hardware handler is instantiated.
And we should call ->detach on removal, too.

[sekharan: update as per comments from agk]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-26 15:14:53 -04:00
Dan Williams
d8e64406a0 md: delay notification of 'active_idle' to the recovery thread
sysfs_notify might sleep, so do not call it from md_safemode_timeout.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-23 13:09:48 -07:00
Dan Williams
2339788376 md: fix merge error
The original STRIPE_OP_IO removal patch had the following hunk:

-               for (i = conf->raid_disks; i--; ) {
+               for (i = conf->raid_disks; i--; )
                        set_bit(R5_Wantwrite, &sh->dev[i].flags);
-                       if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
-                               sh->ops.count++;
-               }

However it appears the hunk became broken after merging:
-               for (i = conf->raid_disks; i--; ) {
+               for (i = conf->raid_disks; i--; )
                        set_bit(R5_Wantwrite, &sh->dev[i].flags);
                        set_bit(R5_LOCKED, &dev->flags);
                        s.locked++;
-                       if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
-                               sh->ops.count++;
-               }

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-23 13:09:45 -07:00
Dan Williams
c9f21aaff1 md: move async_tx_issue_pending_all outside spin_lock_irq
Some dma drivers need to call spin_lock_bh in their device_issue_pending
routines.  This change avoids:

WARNING: at kernel/softirq.c:136 local_bh_enable_ip+0x3a/0x85()

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-23 12:05:51 -07:00
Linus Torvalds
b7e6f62fe2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm crypt: add merge
  dm table: remove merge_bvec sector restriction
  dm: linear add merge
  dm: introduce merge_bvec_fn
  dm snapshot: use per device mempools
  dm snapshot: fix race during exception creation
  dm snapshot: track snapshot reads
  dm mpath: fix test for reinstate_path
  dm mpath: return parameter error
  dm io: remove struct padding
  dm log: make dm_dirty_log init and exit static
  dm mpath: free path selector on invalid args
2008-07-21 10:30:10 -07:00
Linus Torvalds
8a392625b6 Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md: (52 commits)
  md: Protect access to mddev->disks list using RCU
  md: only count actual openers as access which prevent a 'stop'
  md: linear: Make array_size sector-based and rename it to array_sectors.
  md: Make mddev->array_size sector-based.
  md: Make super_type->rdev_size_change() take sector-based sizes.
  md: Fix check for overlapping devices.
  md: Tidy up rdev_size_store a bit:
  md: Remove some unused macros.
  md: Turn rdev->sb_offset into a sector-based quantity.
  md: Make calc_dev_sboffset() return a sector count.
  md: Replace calc_dev_size() by calc_num_sectors().
  md: Make update_size() take the number of sectors.
  md: Better control of when do_md_stop is allowed to stop the array.
  md: get_disk_info(): Don't convert between signed and unsigned and back.
  md: Simplify restart_array().
  md: alloc_disk_sb(): Return proper error value.
  md: Simplify sb_equal().
  md: Simplify uuid_equal().
  md: sb_equal(): Fix misleading printk.
  md: Fix a typo in the comment to cmd_match().
  ...
2008-07-21 10:29:12 -07:00
Milan Broz
d41e26b901 dm crypt: add merge
This patch implements biovec merge function for crypt target.

If the underlying device has merge function defined, call it.
If not, keep precomputed value.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:40 +01:00
Milan Broz
9980c638a6 dm table: remove merge_bvec sector restriction
Remove max_sector restriction - merge function replaced it.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:39 +01:00
Milan Broz
7bc3447b69 dm: linear add merge
This patch implements biovec merge function for linear target.

If the underlying device has merge function defined, call it.
If not, keep precomputed value.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:38 +01:00
Milan Broz
f6fccb1213 dm: introduce merge_bvec_fn
Introduce a bvec merge function for device mapper devices
for dynamic size restrictions.

This code ensures the requested biovec lies within a single
target and then calls a target-specific function to check
against any constraints imposed by underlying devices.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:37 +01:00
Mikulas Patocka
92e868122e dm snapshot: use per device mempools
Change snapshot per-module mempool to per-device mempool.

Per-module mempools could cause a deadlock if multiple
snapshot devices are stacked above each other.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:35 +01:00
Mikulas Patocka
a8d41b59f3 dm snapshot: fix race during exception creation
Fix a race condition that returns incorrect data when a write causes an
exception to be allocated whilst a read is still in flight.

The race condition happens as follows:
* A read to non-reallocated sector in the snapshot is submitted so that the
  read is routed to the original device.
* A write to the original device is submitted. The write causes an exception
  that reallocates the block.  The write proceeds.
* The original read is dequeued and reads the wrong data.

This race can be triggered with CFQ scheduler and one thread writing and
multiple threads reading simultaneously.

(This patch relies upon the earlier dm-kcopyd-per-device.patch to avoid a
deadlock.)

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:34 +01:00
Mikulas Patocka
cd45daffd1 dm snapshot: track snapshot reads
Whenever a snapshot read gets mapped through to the origin, track it in
a per-snapshot hash table indexed by chunk number, using memory allocated
from a new per-snapshot mempool.

We need to track these reads to avoid race conditions which will be fixed
by patches that follow.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:32 +01:00
Alasdair G Kergon
def052d21c dm mpath: fix test for reinstate_path
Fix test for reinstate_path method before attempting to use it.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: Julia Lawall <julia@diku.dk>
2008-07-21 12:00:31 +01:00
Mikulas Patocka
148acff615 dm mpath: return parameter error
Return a specific error message if there are an invalid number of multipath
arguments.

This invalid command returns an "Unknown error" because the ti->error field is
not set

dmsetup create --table '0 2 multipath 0 0 1 1 round-robin 0 1 1 /dev/sdh' mpath0

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:30 +01:00
Richard Kennedy
6ae2fa6718 dm io: remove struct padding
Rearrange struct dm_io.
Shrinks size from 40 -> 32 allowing more objects/slab.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:28 +01:00
Adrian Bunk
c8da2f8dd8 dm log: make dm_dirty_log init and exit static
dm_dirty_log_{init,exit}() can now become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:27 +01:00
Mikulas Patocka
371b2e348b dm mpath: free path selector on invalid args
Free path selector if the arguments are invalid.

This command (note that it is invalid) causes reference leak on module
"dm_round_robin" and prevents the module from being removed.

dmsetup create --table '0 2 multipath 0 0 1 1 round-robin /dev/sdh' mpath0

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-07-21 12:00:24 +01:00
NeilBrown
4b80991c6c md: Protect access to mddev->disks list using RCU
All modifications and most access to the mddev->disks list are made
under the reconfig_mutex lock.  However there are three places where
the list is walked without any locking.  If a reconfig happens at this
time, havoc (and oops) can ensue.

So use RCU to protect these accesses:
  - wrap them in rcu_read_{,un}lock()
  - use list_for_each_entry_rcu
  - add to the list with list_add_rcu
  - delete from the list with list_del_rcu
  - delay the 'free' with call_rcu rather than schedule_work

Note that export_rdev did a list_del_init on this list.  In almost all
cases the entry was not in the list anymore so it was a no-op and so
safe.  It is no longer safe as after list_del_rcu we may not touch
the list_head.
An audit shows that export_rdev is called:
  - after unbind_rdev_from_array, in which case the delete has
     already been done,
  - after bind_rdev_to_array fails, in which case the delete isn't needed.
  - before the device has been put on a list at all (e.g. in
      add_new_disk where reading the superblock fails).
  - and in autorun devices after a failure when the device is on a
      different list.

So remove the list_del_init call from export_rdev, and add it back
immediately before the called to export_rdev for that last case.

Note also that ->same_set is sometimes used for lists other than
mddev->list (e.g. candidates).  In these cases rcu is not needed.

Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21 17:05:25 +10:00
NeilBrown
f2ea68cf42 md: only count actual openers as access which prevent a 'stop'
Open isn't the only thing that increments ->active.  e.g. reading
/proc/mdstat will increment it briefly.  So to avoid false positives
in testing for concurrent access, introduce a new counter that counts
just the number of times the md device it open.

Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21 17:05:25 +10:00
Andre Noll
d6e2215052 md: linear: Make array_size sector-based and rename it to array_sectors.
Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21 17:05:25 +10:00
Andre Noll
f233ea5c9e md: Make mddev->array_size sector-based.
This patch renames the array_size field of struct mddev_s to array_sectors
and converts all instances to use units of 512 byte sectors instead of 1k
blocks.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21 17:05:22 +10:00
Andre Noll
15f4a5fdf3 md: Make super_type->rdev_size_change() take sector-based sizes.
Also, change the type of the size parameter from unsigned long long to
sector_t and rename it to num_sectors.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21 14:42:12 +10:00
Andre Noll
d07bd3bcc4 md: Fix check for overlapping devices.
The checks in overlaps() expect all parameters either in block-based
or sector-based quantities. However, its single caller passes two
rdev->data_offset arguments as well as two rdev->size arguments, the
former being sector counts while the latter are measured in 1K blocks.

This could cause rdev_size_store() to accept an invalid size from user
space. Fix it by passing only sector-based quantities to overlaps().

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21 14:42:07 +10:00
Neil Brown
d7027458d6 md: Tidy up rdev_size_store a bit:
- used strict_strtoull in place of simple_strtoull
 - use my_mddev in place of rdev->mddev (they have the same value)
and more significantly,
 - don't adjust mddev->size to fit, rather reject changes which make
   rdev->size smaller than mddev->size

Adjusting mddev->size is a hangover from bind_rdev_to_array which
does a similar thing.  But it really is a better design to insist that
mddev->size is set as required, then the rdev->sizes are set to allow
for that.  The previous way invites confusion.

Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21 14:22:18 +10:00
Linus Torvalds
89a93f2f48 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (102 commits)
  [SCSI] scsi_dh: fix kconfig related build errors
  [SCSI] sym53c8xx: Fix bogus sym_que_entry re-implementation of container_of
  [SCSI] scsi_cmnd.h: remove double inclusion of linux/blkdev.h
  [SCSI] make struct scsi_{host,target}_type static
  [SCSI] fix locking in host use of blk_plug_device()
  [SCSI] zfcp: Cleanup external header file
  [SCSI] zfcp: Cleanup code in zfcp_erp.c
  [SCSI] zfcp: zfcp_fsf cleanup.
  [SCSI] zfcp: consolidate sysfs things into one file.
  [SCSI] zfcp: Cleanup of code in zfcp_aux.c
  [SCSI] zfcp: Cleanup of code in zfcp_scsi.c
  [SCSI] zfcp: Move status accessors from zfcp to SCSI include file.
  [SCSI] zfcp: Small QDIO cleanups
  [SCSI] zfcp: Adapter reopen for large number of unsolicited status
  [SCSI] zfcp: Fix error checking for ELS ADISC requests
  [SCSI] zfcp: wait until adapter is finished with ERP during auto-port
  [SCSI] ibmvfc: IBM Power Virtual Fibre Channel Adapter Client Driver
  [SCSI] sg: Add target reset support
  [SCSI] lib: Add support for the T10 (SCSI) Data Integrity Field CRC
  [SCSI] sd: Move scsi_disk() accessor function to sd.h
  ...
2008-07-15 18:58:04 -07:00
Chandra Seetharaman
fe9233fb69 [SCSI] scsi_dh: fix kconfig related build errors
Do not automatically "select" SCSI_DH for dm-multipath. If SCSI_DH
doesn't exist,just do not allow  hardware handlers to be used.

Handle SCSI_DH being a module also. Make sure it doesn't allow DM_MULTIPATH
to be compiled in when SCSI_DH is a module.

[jejb: added comment for Kconfig syntax]
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-15 09:16:43 -05:00
Linus Torvalds
dddec01eb8 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (37 commits)
  splice: fix generic_file_splice_read() race with page invalidation
  ramfs: enable splice write
  drivers/block/pktcdvd.c: avoid useless memset
  cdrom: revert commit 22a9189 (cdrom: use kmalloced buffers instead of buffers on stack)
  scsi: sr avoids useless buffer allocation
  block: blk_rq_map_kern uses the bounce buffers for stack buffers
  block: add blk_queue_update_dma_pad
  DAC960: push down BKL
  pktcdvd: push BKL down into driver
  paride: push ioctl down into driver
  block: use get_unaligned_* helpers
  block: extend queue_flag bitops
  block: request_module(): use format string
  Add bvec_merge_data to handle stacked devices and ->merge_bvec()
  block: integrity flags can't use bit ops on unsigned short
  cmdfilter: extend default read filter
  sg: fix odd style (extra parenthesis) introduced by cmd filter patch
  block: add bounce support to blk_rq_map_user_iov
  cfq-iosched: get rid of enable_idle being unused warning
  allow userspace to modify scsi command filter on per device basis
  ...
2008-07-14 13:15:14 -07:00
Andre Noll
0f420358e3 md: Turn rdev->sb_offset into a sector-based quantity.
Rename it to sb_start to make sure all users have been converted.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Neil Brown <neilb@suse.de>
2008-07-11 22:02:23 +10:00
Andre Noll
b73df2d3d6 md: Make calc_dev_sboffset() return a sector count.
As BLOCK_SIZE_BITS is 10 and

	MD_NEW_SIZE_SECTORS(2 * x) = 2 * NEW_SIZE_BLOCKS(x),

the return value of calc_dev_sboffset() doubles. Fix up all three
callers accordingly.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Neil Brown <neilb@suse.de>
2008-07-11 22:02:23 +10:00
Andre Noll
e7debaa495 md: Replace calc_dev_size() by calc_num_sectors().
Number of sectors is the preferred unit for sizes of raid devices,
so change calc_dev_size() so that it returns this unit instead of
the number of 1K blocks.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Neil Brown <neilb@suse.de>
2008-07-11 22:02:23 +10:00
Andre Noll
d71f9f88d7 md: Make update_size() take the number of sectors.
Changing the internal representations of sizes of raid devices
from 1K blocks to sector counts (512B units) is desirable because
it allows to get rid of many divisions/multiplications and unnecessary
casts that are present in the current code.

This patch is a first step in this direction. It replaces the old
1K-based "size" argument of update_size() by "num_sectors" and
fixes up its two callers.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Neil Brown <neilb@suse.de>
2008-07-11 22:02:22 +10:00
Neil Brown
df5b20cf68 md: Better control of when do_md_stop is allowed to stop the array.
do_md_stop check the number of active users before allowing the array
to be stopped.
Two problems:
  1/ it assumes the request is coming through an open file descriptor
     (via ioctl) so it allows for that.  This is not always the case.
  2/ it doesn't do the check it the array hasn't been activated.
     This is not good for cases when we use an inactive array to hold
     some devices in a container.

Signed-off-by: Neil Brown <neilb@suse.de>
2008-07-11 22:02:22 +10:00
Andre Noll
26ef379f53 md: get_disk_info(): Don't convert between signed and unsigned and back.
The current code copies a signed int from user space, converts it to
unsigned and passes the unsigned value to find_rdev_nr() which expects
a signed value. Simply pass the signed value from user space directly.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Neil Brown <neilb@suse.de>
2008-07-11 22:02:21 +10:00
Andre Noll
80fab1d77b md: Simplify restart_array().
Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Neil Brown <neilb@suse.de>
2008-07-11 22:02:21 +10:00
Andre Noll
ebc2433728 md: alloc_disk_sb(): Return proper error value.
If alloc_page() fails, ENOMEM is a more suitable error value
than EINVAL.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Neil Brown <neilb@suse.de>
2008-07-11 22:02:20 +10:00
Andre Noll
ce0c8e05f8 md: Simplify sb_equal().
The only caller of sb_equal() tests the return value against
zero, so it's OK to return the negated return value of memcmp().

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Neil Brown <neilb@suse.de>
2008-07-11 22:02:20 +10:00
Andre Noll
05710466c9 md: Simplify uuid_equal().
Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Neil Brown <neilb@suse.de>
2008-07-11 22:02:20 +10:00
Linus Torvalds
2283af5b0b Merge branch 'for-2.6.26' of git://neil.brown.name/md
* 'for-2.6.26' of git://neil.brown.name/md:
  md: ensure all blocks are uptodate or locked when syncing
2008-07-10 09:49:46 -07:00
Dan Williams
7a1fc53c5a md: ensure all blocks are uptodate or locked when syncing
Remove the dubious attempt to prefer 'compute' over 'read'.  Not only is it
wrong given commit c337869d (md: do not compute parity unless it is on a failed
drive), but it can trigger a BUG_ON in handle_parity_checks5().

Cc: <stable@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Neil Brown <neilb@suse.de>
2008-07-10 15:25:18 +10:00
Andre Noll
35020f1a06 md: sb_equal(): Fix misleading printk.
Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Neil Brown <neilb@suse.de>
2008-07-08 10:53:20 +10:00
Andre Noll
7f6ce76928 md: Fix a typo in the comment to cmd_match().
Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Neil Brown <neilb@suse.de>
2008-07-08 10:53:00 +10:00
Andre Noll
910d8cb3f4 md: Fix typo in array_state comment.
Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Neil Brown <neilb@suse.de>
2008-07-08 10:52:45 +10:00