Commit Graph

37 Commits

Author SHA1 Message Date
Kumar Gala
ca851c783c powerpc/cpm: Remove some cruft code and defines
Kill of some old defines and macros that we no longer use like
CPM_MAP_ADDR and CPM_IRQ_OFFSET.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:47:19 -05:00
Rusty Russell
1a8a51004a cpumask: remove references to struct irqaction's mask field.
Impact: cleanup

It's unused, since about 1995.  So remove all initialization of it in
preparation for actually removing the field.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-30 22:05:14 +10:30
Heiko Schocher
e14d4af0c8 powerpc: Add support for the MPC852 based mgsuvd board from keymile.
Supported SMC1 (serial console), SCC3 Ethernet (10Mbps hdx).

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16 10:01:30 -05:00
Jochen Friedrich
dc2380ec85 powerpc: implement GPIO LIB API on CPM1 Freescale SoC.
This patch implement GPIO LIB support for the CPM1 GPIOs.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-28 07:42:09 -05:00
Jochen Friedrich
a5d28c8e64 powerpc/CPM: Add i2c pins to dts and board setup
Initialize I2C pins on boards with CPM1/CPM2 controllers and document the
i2c bus in booting-without-of.

The boards don't have any I2C chips connected to the I2C bus, so unless
some external chips are connected to the boards, this code is just an
example of setting everything else up.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14 07:55:39 -05:00
Scott Wood
3dd82a1ea7 [POWERPC] CPM: Always use new binding.
The kconfig entry can go away once arch/ppc and references to the config in
drivers are removed.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:40 -05:00
Anton Vorontsov
5053037816 [POWERPC] 8xx: Timebase frequency should not depend on bus-frequency
m8xx_setup.c says:
   /* Force all 8xx processors to use divide by 16 processor clock. */

And at the same time it is using bus-frequency for calculating
timebase.  It is okay for most setups because bus-frequency is
equal to clock-frequency.

The problem emerges when cpu frequency is > 66MHz, quoting
u-boot/cpu/mpc8xx/speed.c:

        if (gd->cpu_clk <= 66000000) {
                sccr_reg |= SCCR_EBDF00;        /* bus division factor = 1 */
                gd->bus_clk = gd->cpu_clk;
        } else {
                sccr_reg |= SCCR_EBDF01;        /* bus division factor = 2 */
                gd->bus_clk = gd->cpu_clk / 2;
        }

So in case of cpu clock > 66MHz, bus_clk = cpu_clk / 2. An then, from
Linux, we calculate timebase frequency as tb_freq = bus_clk / 16,
that is cpu_clk / 2 / 16, which is wrong.

This fixes the system time drifting problem on the EP885C board
running at 133MHz.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-26 22:17:03 +11:00
Scott Wood
266fb4af93 [POWERPC] 8xx: adder875, ep88xc: fix to match recent 8xx cleanups.
asm/commproc.h was renamed to asm/cpm1.h
sysdev/commproc.h was renamed to platforms/8xx/mpc8xx.h
m8xx_pic_init was renamed to mpc8xx_pics_init

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05 23:29:58 -06:00
Jochen Friedrich
b5677d848c [POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c
Rename commproc.[ch] to cpm1.[ch] to be more consistent with cpm2. Also
rename cpm2_common.c to cpm2.c as suggested by Scott Wood. Adjust the
includes accordingly.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 08:31:05 -06:00
Jochen Friedrich
02753cb608 [POWERPC] 8xx: Get rid of conditional includes of board specific setup
Directly include mpc885ads.h from mpc885ads_setup.c. Now we can get rid
of the arch dependent includes in mpc8xx.h.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 08:31:04 -06:00
Jochen Friedrich
49b51545ff [POWERPC] 8xx: Remove sysdev/commproc.h
Move cpm1 specific prototypes to asm/commproc.h and mpc8xx specific
prototypes to asm/mpc8xx.h. Adjust includes accordingly. Remove now
unneeded sysdev/commproc.h.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 08:31:02 -06:00
Jochen Friedrich
9e8f38b038 [POWERPC] 8xx: Remove unneeded and misspelled prototype m8xx_calibrate_decr
m8xx_calibrate_decr seems to be a misspelled prototype for
mpc8xx_calibrate_decr. As it's not needed anyways, just remove it.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 08:31:01 -06:00
Jochen Friedrich
d0a02a06bc [POWERPC] 8xx: Rename m8xx_pic_init to mpc8xx_pics_init
m8xx_pic_init calls both mpc8xx_pic_init and cpm_pic_init. Renaming the
function to use the same name space as the rest of the mpc8xx
specific funtions and to be more meaningful.

m8xx_pic_init is declared in ppc8xx_pic.h but defined nowhere in the ppc
tree. Remove it.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28 08:31:00 -06:00
Grant Likely
6869e4ad4b [POWERPC] 8xx: Use machine_*_initcall() hooks in platform code
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:54:25 -06:00
Scott Wood
de7566bff3 [POWERPC] 8xx: adder875 - Fix flash bus-width and remove duplicate __initdata
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:34:56 -06:00
Scott Wood
b09c16440e [POWERPC] 8xx: Analogue & Micro Adder875 board support.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23 19:34:40 -06:00
Scott Wood
0b5cf10691 [POWERPC] 8xx: Convert mpc866ads to the new device binding.
Verified on mpc866ads. This version has muram and brg nodes added to dts
to get the things work.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
2007-12-13 22:45:35 -06:00
joe@perches.com
df3c9019ed [POWERPC] Add missing spaces in printk formats
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03 13:56:27 +11:00
Scott Wood
11c146cc19 [POWERPC] 8xx/wrapper: Embedded Planet EP88xC support
This board is also resold by Freescale under the names
"QUICCStart MPC885 Evaluation System" and "CWH-PPC-885XN-VE".

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 11:02:40 -05:00
Scott Wood
20906ecea2 [POWERPC] 8xx: mpc885ads cleanup
It now uses the new CPM binding and the generic pin/clock functions, and
has assorted fixes and cleanup.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 11:02:38 -05:00
Scott Wood
7401685242 [POWERPC] 8xx: Work around CPU15 erratum.
The CPU15 erratum on MPC8xx chips can cause incorrect code execution
under certain circumstances, where there is a conditional or indirect
branch in the last word of a page, with a target in the last cache line
of the next page.  This patch implements one of the suggested
workarounds, by forcing a TLB miss whenever execution crosses a page
boundary.  This is done by invalidating the pages before and after the
one being loaded into the TLB in the ITLB miss handler.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03 20:36:36 -05:00
Scott Wood
fb533d0c5a [POWERPC] 8xx: Infrastructure code cleanup.
1. Keep a global mpc8xx_immr mapping, rather than constantly
creating temporary mappings.
2. Look for new fsl,cpm1 and fsl,cpm1-pic names.
3. Always reset the CPM when not using the udbg console;
this is required in case the firmware initialized a device
that is incompatible with one that the kernel is about to
use.
4. Remove some superfluous casts and header includes.
5. Change a usage of IMAP_ADDR to get_immrbase().
6. Use phys_addr_t, not uint, for dpram_pbase.
7. Various sparse-related fixes, such as __iomem annotations.
8. Remove mpc8xx_show_cpuinfo, which doesn't provide anything
useful beyond the generic cpuinfo handler.
9. Move prototypes for 8xx support functions from board files
to sysdev/commproc.h.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03 20:36:35 -05:00
Scott Wood
c374e00e17 [POWERPC] Add early debug console for CPM serial ports.
This code assumes that the ports have been previously set up, with
buffers in DPRAM.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03 20:35:43 -05:00
Tony Breeds
408e83a682 [POWERPC] Convert define_machine(mpc885_ads) to C99 initializer syntax
Make the define_machine() block for mpc885_ads more greppable and
consistent with other examples in tree.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-22 14:49:22 +10:00
Kumar Gala
ed16c20da6 [POWERPC] Remove old includes from arch/ppc
Remove includes of files that existed in arch/ppc that we dont need in
arch/powerpc anymore.  The following includes were removed:

 <asm/amigappc.h>
 <asm/bootinfo.h>
 <asm/ppcboot.h>
 <asm/ppc_sys.h>
 <asm/residual.h>
 <asm/m8260_pci.h>

This also caused platforms/embedded6xx/mpc7448_hpc2.h to no longer be
needed and thus removed.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22 22:39:35 -05:00
Scott Wood
4b218e9bb2 [POWERPC] Whitespace cleanup in arch/powerpc
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:47 +10:00
Jon Loeliger
c3ca32fdb8 [POWERPC] 8xx: Remove unnecessary loops_per_jiffy initialization code
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:51 +10:00
Vitaly Bordug
99121c0da3 powerpc: 8xx: fix whitespace and indentation
Rolling forward PCMCIA driver, it was discovered that the indentation in
existing one, as well as in BSP side are very odd.  This patch is just result
of Lindent run ontop of culprit files.

Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:02 -07:00
Vitaly Bordug
80128ff79d [POWERPC] 8xx: mpc885ads pcmcia support
Adds support for PowerQuicc on-chip PCMCIA.  The driver is implemented as
of_device, so only arch/powerpc stuff is capable to use it, which now implies
only mpc885ads reference board.

To cope with the code that should be hooked inside driver, but is really board
specific (like set_voltage), global structure mpc8xx_pcmcia_ops holds
necessary function pointers that are filled in the BSP code.

[akpm@linux-foundation.org: whitespace diddles]
Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-10 00:33:51 -05:00
Uwe Kleine-König
5886269962 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 08:58:16 +02:00
Paul Mackerras
445c9b5507 Merge branch 'kconfig' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.22 2007-04-24 08:42:11 +10:00
Kumar Gala
c8a55f3dda [POWERPC] Convert 8xx platform to unified platform Kconfig
Moved 8xx platform Kconfig over to being sourced by the unified
arch/powerpc/platforms/Kconfig.  Also, cleaned up whitespace issues in 8xx
Kconfig.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-04-12 17:35:54 -05:00
Stephen Rothwell
e2eb63927b [POWERPC] Rename get_property to of_get_property: arch/powerpc
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:19 +10:00
Mariusz Kozlowski
a782a9e3a1 [POWERPC] 8xx parenthesis balance
This balances parenthesis in powerpc 8xx header files.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-16 16:38:19 +11:00
Vitaly Bordug
29f1530f19 [POWERPC] Add mpc866ads board-specific bits to arch/powerpc
This add support of the Freescale mpc86xads reference board to
arch/powerpc. Supported SMC1 and SMC2 (UART and serial console), FEC
100Mbps Ethernet, SCC1 Ethernet (10Mbps hdx)

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Vitaly Bordug
df34403dca [POWERPC] 8xx: Add mpc885ads support and common mpc8xx files
This adds the core 8xx stuff and specifically mpc885ads board-specific
bits to arch/powerpc. Respective Kconfig has been cleaned up from the stuff
not yet ported over to avoid confusion. Updated and cleaned version.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Paul Mackerras
14cf11af6c powerpc: Merge enough to start building in arch/powerpc.
This creates the directory structure under arch/powerpc and a bunch
of Kconfig files.  It does a first-cut merge of arch/powerpc/mm,
arch/powerpc/lib and arch/powerpc/platforms/powermac.  This is enough
to build a 32-bit powermac kernel with ARCH=powerpc.

For now we are getting some unmerged files from arch/ppc/kernel and
arch/ppc/syslib, or arch/ppc64/kernel.  This makes some minor changes
to files in those directories and files outside arch/powerpc.

The boot directory is still not merged.  That's going to be interesting.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00