Commit Graph

198 Commits

Author SHA1 Message Date
Greg Kroah-Hartman
3ee074bf43 device create: ide: convert device_create_drvdata to device_create
Now that device_create() has been audited, rename things back to the
original call to be sane.

Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:45 -07:00
Elias Oltmanns
4abdc6ee7c ide: Implement disk shock protection support (v4)
On user request (through sysfs), the IDLE IMMEDIATE command with UNLOAD
FEATURE as specified in ATA-7 is issued to the device and processing of
the request queue is stopped thereafter until the specified timeout
expires or user space asks to resume normal operation. This is supposed
to prevent the heads of a hard drive from accidentally crashing onto the
platter when a heavy shock is anticipated (like a falling laptop expected
to hit the floor). Port resets are deferred whenever a device on that
port is in the parked state.

v3:
Elias Oltmanns <eo@nebensachen.de> wrote:
[...]
> >> 1. Make sure that no negative value is being passed to
> >>    jiffies_to_msecs() in ide_park_show().
> >> 2. Drop the superfluous variable hwif in ide_special_rq().
> >> 3. Skip initialisation of task and tf in ide_special_rq() if we are not
> >>    handling a (un)park request.
> >
> > Well, #3 should have been done differently because we donn't want to
> > check for REQ_(UN)?PARK_HEADS more often than is necessary.
> 
> While preparing the backport to 2.6.27, it has just occurred to me that
> we need to clear the IDE_DFLAG_PARKED flag in ide_disk_pre_reset()
> because this flag must not be set after *any* sort of access to the
> device.

v4:
Fix a memory leak due to a missing blk_put_request() in
issue_park_cmd(). Additionally, we should plug the queue when enqueueing
the unpark request because there is no guarantee that the park timeout
has not expired by then. Even though the chance for that to happen is
very slim, the request might end up hanging in the queue until the next
I/O operation is queued up. While at it, clean up the code a little:
- make issue_park_cmd() a function of type void since nobody cares for
  the return value anyway;
- use blk_start_queueing() instead of __blk_run_queue() since we don't
  have to worry about recursion;
- remove a superfluous pointer deference in task_no_data_intr().

Signed-off-by: Elias Oltmanns <eo@nebensachen.de>
Cc: Jeff Garzik <jeff@garzik.org>,
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 21:39:50 +02:00
Elias Oltmanns
e415e495f8 ide: Two fixes regarding memory allocation
In function ide_devset_execute() we should use __GFP_WAIT rather than
GFP_KERNEL. Also, the allocation cannot possibly fail at that point.
More importantly, there is a potential memory leak in the device probing
code. The infrastructure seems rather complex and I hope I haven't messed
anything up by trying to fix this.

Signed-off-by: Elias Oltmanns <eo@nebensachen.de>
[bart: remove superfluous ide_lock taking]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 21:39:45 +02:00
Bartlomiej Zolnierkiewicz
4ab3d50224 ide: set IDE_AFLAG_DRQ_INTERRUPT in do_identify()
Set IDE_AFLAG_DRQ_INTERRUPT in do_identify() instead of ATAPI
device drivers *_setup() methods.

While at it:
- use ata_id_cdb_intr()

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 21:39:43 +02:00
Bartlomiej Zolnierkiewicz
a36223b0dc ide: remove ide_host_alloc_all()
* Remove no longer used ide_host_alloc_all().

* Add MAX_HOST_PORTS define and use it instead of MAX_HWIFS
  as the maximum number of host ports possible.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 21:39:43 +02:00
Bartlomiej Zolnierkiewicz
7f612f272a ide: remove [ata_]select_t
* Use 'drive->dn & 1' in ide_init_disk().

* remove [ata_]select_t.

While at it:

* Use ATA_DEVICE_OBS define in ide_port_init_devices_data().

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 21:39:40 +02:00
Bartlomiej Zolnierkiewicz
123995b971 ide: use 'drive->dn & 1' instead of drive->select.b.unit
* Call ide_port_init_devices() in ide_host_register()
  also if 'struct ide_port_info *d' is not available.

* Init drive->dn in ide_port_init_devices() instead of
  ide_probe_port() so it is valid also in ->init_dev.

* Pass device number to ide_dev_apply_params().

* Use 'drive->dn & 1' instead of drive->select.b.unit.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 21:39:40 +02:00
Bartlomiej Zolnierkiewicz
97100fc816 ide: add device flags
Add 'unsigned long dev_flags' to ide_drive_t and convert bitfields
to IDE_DFLAG_* flags.

While at it:
- IDE_DFLAG_ADDRESSING -> IDE_DFLAG_LBA48
- fixup some comments
- remove needless g->flags zeroing from ide*_probe()

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 21:39:36 +02:00
Bartlomiej Zolnierkiewicz
75d21fffd8 ide: remove unnecessary MAX_HWIFS checks from ide-probe.c
MAX_HWIFS is now always equal to the number of IDE major numbers.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 21:39:33 +02:00
Bartlomiej Zolnierkiewicz
feb22b7f8e ide: add proper PCI PM support (v2)
* Keep pointer to ->init_chipset method also in
  struct ide_host and set it in ide_host_alloc_all().

* Add ide_pci_suspend() and ide_pci_resume() helpers
  (default ->suspend and ->resume implementations).

* ->init_chipset can no longer be marked __devinit.

* Add proper PCI PM support to IDE PCI host drivers
  (rz1000.c and tc86c001.c are skipped for now since
  they need to be converted from using ->init_hwif
  to use ->init_chipset instead).

v2:
* Cleanup CONFIG_PM #ifdef-s per akpm's suggestion.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 22:39:32 +02:00
Bartlomiej Zolnierkiewicz
718c72e83d ide: use ata_id_is_cfa()
Use ata_id_is_cfa() in do_identify() instead of open-coding
check for CompactFlash devices (the inline helper also takes
care of detecting CFs advertising themselves as ATA disks).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 22:39:31 +02:00
Bartlomiej Zolnierkiewicz
151a670186 ide: remove SECTOR_WORDS define
Just use SECTOR_SIZE instead.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 22:39:28 +02:00
Bartlomiej Zolnierkiewicz
8185d5aa93 ide: /proc/ide/hd*/settings rework
* Add struct ide_devset, S_* flags, *DEVSET() & ide*_devset_*() macros.

* Add 'const struct ide_devset **settings' to ide_driver_t.

* Use 'const struct ide_devset **settings' in ide_drive_t instead of
  'struct ide_settings_s *settings'.  Then convert core code and device
  drivers to use struct ide_devset and co.:

  - device settings are no longer allocated dynamically for each device
    but instead there is an unique struct ide_devset instance per setting

  - device driver keeps the pointer to the table of pointers to its
    settings in ide_driver_t.settings

  - generic settings are kept in ide_generic_setting[]

  - ide_proc_[un]register_driver(), ide_find_setting_by_name(),
    ide_{read,write}_setting() and proc_ide_{read,write}_settings()
    are updated accordingly

  - ide*_add_settings() are removed

* Remove no longer used __ide_add_setting(), ide_add_setting(),
  __ide_remove_setting() and auto_remove_settings().

* Remove no longer used TYPE_*, SETTING_*, ide_procset_t
  and ide_settings_t.

* ->keep_settings, ->using_dma, ->unmask, ->noflush, ->dsc_overlap,
  ->nice1, ->addressing, ->wcache and ->nowerr ide_drive_t fields
  can now be bitfield flags.

While at it:

* Rename ide_find_setting_by_name() to ide_find_setting().

* Rename write_wcache() to set_wcache().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 22:39:28 +02:00
Bartlomiej Zolnierkiewicz
7c51c17e04 ide: remove CONFIG_IDEDISK_MULTI_MODE
Use multi PIO by default when available and remove no longer
needed CONFIG_IDEDISK_MULTI_MODE (it should be safe nowadays,
despite to what help entry has been saying).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 22:39:26 +02:00
Bartlomiej Zolnierkiewicz
a2cdee5a9a ide: remove IDE_CHIPSET_* macros
They just obfuscate the code.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 22:39:24 +02:00
Bartlomiej Zolnierkiewicz
7c199a5496 ide: remove no longer needed BUG_ON()-s from init_irq()
init_irq() is now called only during initial host registration
so these BUG_ON()-s are no loner needed (+ the last one was done
too late anyway).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 22:39:23 +02:00
Bartlomiej Zolnierkiewicz
b163f46d5e ide: enhance ide_busy_sleep()
* Make ide_busy_sleep() take timeout value as a parameter
  and also allow use of AltStatus Register if requested with
  altstatus parameter.  Update existing users accordingly.

* Convert ide_driveid_update() and actual_try_to_identify()
  to use ide_busy_sleep().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 22:39:23 +02:00
Bartlomiej Zolnierkiewicz
c36a7e9884 ide: fix EXABYTENEST handling in probe_for_drive()
Fix EXABYTENEST handling in probe_for_drive() (so drive->present
is checked for "nested" device) and cleanup enable_nest().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 22:39:23 +02:00
Bartlomiej Zolnierkiewicz
3a7d24841a ide: use ATA_* defines instead of *_STAT and *_ERR ones
* ERR_STAT   -> ATA_ERR
* INDEX_STAT -> ATA_IDX
* ECC_STAT   -> ATA_CORR
* DRQ_STAT   -> ATA_DRQ
* SEEK_STAT  -> ATA_DSC
* WRERR_STAT -> ATA_DF
* READY_STAT -> ATA_DRDY
* BUSY_STAT  -> ATA_BUSY

* MARK_ERR   -> ATA_AMNF
* TRK0_ERR   -> ATA_TRK0NF
* ABRT_ERR   -> ATA_ABORTED
* MCR_ERR    -> ATA_MCR
* ID_ERR     -> ATA_IDNF
* MC_ERR     -> ATA_MC
* ECC_ERR    -> ATA_UNC
* ICRC_ERR   -> ATA_ICRC

* BBD_ERR    -> ATA_BBK

Also:

* ILI_ERR    -> ATAPI_ILI
* EOM_ERR    -> ATAPI_EOM
* LFS_ERR    -> ATAPI_LFS

* CD         -> ATAPI_COD
* IO         -> ATAPI_IO

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 22:39:21 +02:00
Bartlomiej Zolnierkiewicz
aaaade3f05 ide: WIN_* -> ATA_CMD_*
* Use ATA_CMD_* defines instead of WIN_* ones.

While at it:

* EXABYTE_ENABLE_NEXT -> ATA_EXABYTE_ENABLE_NEST

* SETFEATURES_{EN,DIS}_WCACHE -> SETFEATURES_WC_{ON,OFF}

* SETFEATURES_{EN,DIS}_AAM -> SETFEATURES_AAM_{ON,OFF}

* SMART_* -> ATA_SMART_*

* Remove stale comment from ide-proc.c.

Partially based on earlier work by Chris Wedgwood.

Acked-by: Chris Wedgwood <cw@f00f.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 22:39:21 +02:00
Bartlomiej Zolnierkiewicz
dd8f46f64a ide: use ata_id_current_chs_valid()
Replace open-coded checks by ata_id_current_chs_valid().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 22:39:19 +02:00
Bartlomiej Zolnierkiewicz
48fb2688aa ide: remove drive->driveid
* Factor out HDIO_[OBSOLETE,GET]_IDENTITY ioctls handling
  to ide_get_identity_ioctl().

* Use temporary buffer in ide_get_identity_ioctl() instead
  of accessing drive->id directly.

* Add ide_id_to_hd_driveid() inline to convert raw id into
  struct hd_driveid format (needed on big-endian).

* Use ide_id_to_hd_driveid() in ide_get_identity_ioctl(),
  cleanup ide_fix_driveid() and switch ide to use use raw id.

* Remove no longer needed drive->driveid.

  This leaves us with 3 users of struct hd_driveid in tree:
  - arch/um/drivers/ubd_kern.c
  - drivers/block/xsysace.c
  - drivers/usb/storage/isd200.c

While at it:

* Use ata_id_u{32,64}() and ata_id_has_{dma,lba,iordy}() macros.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 22:39:19 +02:00
Bartlomiej Zolnierkiewicz
4dde4492d8 ide: make drive->id an union (take 2)
Make drive->id an unnamed union so id can be accessed either by using
'u16 *id' or 'struct hd_driveid *driveid'.  Then convert all existing
drive->id users accordingly (using 'u16 *id' when possible).

This is an intermediate step to make ide 'struct hd_driveid'-free.

While at it:

- Add missing KERN_CONTs in it821x.c.

- Use ATA_ID_WORDS and ATA_ID_*_LEN defines.

- Remove unnecessary checks for drive->id.

- s/drive_table/table/ in ide_in_drive_list().

- Cleanup ide_config_drive_speed() a bit.

- s/drive1/dev1/ & s/drive0/dev0/ in ide_undecoded_slave().

v2:
Fix typo in drivers/ide/ppc/pmac.c. (From Stephen Rothwell)

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 22:39:19 +02:00
Bartlomiej Zolnierkiewicz
df1f8378c2 ide: cleanup ide_disk_init_mult_count()
* Remove superfluous checks for drive->mult_req.

* No need to zero drive's fields.

* Move the common code out of #ifdef scope.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 22:39:18 +02:00
Tejun Heo
ed9e198234 block: implement and use {disk|part}_to_dev()
Implement {disk|part}_to_dev() and use them to access generic device
instead of directly dereferencing {disk|part}->dev.  To make sure no
user is left behind, rename generic devices fields to __dev.

This is in preparation of unifying partition 0 handling with other
partitions.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:07 +02:00
Bartlomiej Zolnierkiewicz
ca09a237b8 ide: workaround for bogus gcc warning in ide_sysfs_register_port()
Reported-by: "Steven Noonan" <steven@uplinklabs.net>
Suggested-by: "Elias Oltmanns" <eo@nebensachen.de>
Cc: mingo@elte.hu
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-05 18:23:28 +02:00
Bartlomiej Zolnierkiewicz
1b8ebad87b ide: use proper printk() KERN_* levels in ide-probe.c
While at it:

- fixup printk() messages in save_match() and hwif_init().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 22:53:36 +02:00
Bartlomiej Zolnierkiewicz
52f3a771fe ide: fix for EATA SCSI HBA in ATA emulating mode
IDE probing code used to skip devices attached to EATA SCSI HBA
in ATA emulating mode but because of warm-plug support port I/O
resources are no longer freed if no devices are detected on a port
and the decision about the driver to use is left up to the user.

Remove no longer valid EATA SCSI HBA quirk from do_identify().

Noticed-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 22:53:36 +02:00
Bartlomiej Zolnierkiewicz
ef0b04276d ide: add ide_pci_remove() helper
* Add 'unsigned long host_flags' field to struct ide_host.

* Set ->host_flags in ide_host_alloc_all().

* Always set PCI dev's ->driver_data in ide_pci_init_{one,two}().

* Add ide_pci_remove() helper (the default implementation for
  struct pci_driver's ->remove method).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 22:53:19 +02:00
Bartlomiej Zolnierkiewicz
08da591e14 ide: add ide_device_{get,put}() helpers
* Add 'struct ide_host *host' field to ide_hwif_t and set it
  in ide_host_alloc_all().

* Add ide_device_{get,put}() helpers loosely based on SCSI's
  scsi_device_{get,put}() ones.

* Convert IDE device drivers to use ide_device_{get,put}().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 22:53:15 +02:00
Bartlomiej Zolnierkiewicz
6cdf6eb357 ide: add ->dev and ->host_priv fields to struct ide_host
* Add 'struct device *dev[2]' and 'void *host_priv' fields
  to struct ide_host.

* Set ->dev[] in ide_host_alloc_all()/ide_setup_pci_device[s]().

* Pass 'void *priv' argument to ide_setup_pci_device[s]()
  and use it to set ->host_priv.

* Set PCI dev's ->driver_data to point to the struct ide_host
  instance if PCI host driver wants to use ->host_priv.

* Rename ide_setup_pci_device[s]() to ide_pci_init_{one,two}().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 22:53:14 +02:00
Pavel Machek
fc410698eb ide: small whitespace fixes
Small whitespace fixes for drivers/ide.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:56:02 +02:00
Bartlomiej Zolnierkiewicz
8a69580e1e ide: add ide_host_free() helper (take 2)
* Add ide_host_free() helper and convert ide_host_remove() to use it.

* Fix handling of ide_host_register() failure in ide_host_add(),
  icside.c, ide-generic.c, falconide.c and sgiioc4.c.

While at it:

* Fix handling of ide_host_alloc_all() failure in ide-generic.c.

* Fix handling of ide_host_alloc() failure in falconide.c
  (also return the correct error value if no device is found).

v2:
* falconide build fix. (From Stephen Rothwell)

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:59 +02:00
Bartlomiej Zolnierkiewicz
18de10170d ide: allocate ide_hwif_t instances dynamically
* Allocate ide_hwif_t instances dynamically and remove ide_hwifs[].

  This cuts almost ~14kB from ide-probe.o (x86-32, MAX_HWIFS == 10):

   text    data     bss     dec     hex filename
   9140      40   14084   23264    5ae0 drivers/ide/ide-probe.o.before
   9169      40      44    9253    2425 drivers/ide/ide-probe.o.after

* Remove no longer needed ide_init_port_data() call from ide_unregister().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:58 +02:00
Bartlomiej Zolnierkiewicz
af1cbba373 ide: add ide_ports[]
* Add ide_ports[] table keeping pointers to all initialized ports.

* Set ide_ports[] entry for a given port in init_irq() and clear it
  ide_remove_port_from_hwgroup().

* Convert init_irq() to use ide_ports[] instead of ide_hwifs[] for
  grouping ports into hwgroup.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:58 +02:00
Bartlomiej Zolnierkiewicz
6059143ae3 ide: move ide_remove_port_from_hwgroup() to ide-probe.c
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:58 +02:00
Bartlomiej Zolnierkiewicz
8cdf310025 ide: fix IDE port slots reservation and freeing (take 2)
* Make ide_find_port_slot() return port slot index.

* Add ide_free_port_slot() helper.

* Move ide_init_port_data() call and error printk() from
  ide_find_port_slot() to ide_host_alloc_all().

* Make ide_{find,free}_port_slot() take ide_cfg_mtx mutex
  and convert them use ide_indexes bitmap to keep track of
  reserved port slots.

* Don't set hwif->chipset in ide_host_alloc_all() as it is
  no longer necessary.

v2:
* Pass the correct slot index to ide_init_port_data().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:57 +02:00
Bartlomiej Zolnierkiewicz
e0d0020788 ide: fix ide_host_register() return value
Fix ide_host_register() to fail only if all ports cannot be registered.

While at it:

* Use host->ports[] instead of ide_hwifs[] and remove idx[].

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:57 +02:00
Bartlomiej Zolnierkiewicz
6f904d0152 ide: add ide_host_add() helper
Add ide_host_add() helper which does ide_host_alloc()+ide_host_register(),
then convert ide_setup_pci_device[s](), ide_legacy_device_add() and some
host drivers to use it.

While at it:

* Fix ide_setup_pci_device[s](), ide_arm.c, gayle.c, ide-4drives.c,
  macide.c, q40ide.c, cmd640.c and cs5520.c to return correct error value.

* -ENOENT -> -ENOMEM in rapide.c, ide-h8300.c, ide-generic.c, au1xxx-ide.c
  and pmac.c

* -ENODEV -> -ENOMEM in palm_bk3710.c, ide_platform.c and delkin_cb.c

* -1 -> -ENOMEM in ide-pnp.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:57 +02:00
Bartlomiej Zolnierkiewicz
48c3c10726 ide: add struct ide_host (take 3)
* Add struct ide_host which keeps pointers to host's ports.

* Add ide_host_alloc[_all]() and ide_host_remove() helpers.

* Pass 'struct ide_host *host' instead of 'u8 *idx' to
  ide_device_add[_all]() and rename it to ide_host_register[_all]().

* Convert host drivers and core code to use struct ide_host.

* Remove no longer needed ide_find_port().

* Make ide_find_port_slot() static.

* Unexport ide_unregister().

v2:
* Add missing 'struct ide_host *host' to macide.c.

v3:
* Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/)
  (Noticed by Stephen Rothwell).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:57 +02:00
Bartlomiej Zolnierkiewicz
374e042c3e ide: add struct ide_tp_ops (take 2)
* Add struct ide_tp_ops for transport methods.

* Add 'const struct ide_tp_ops *tp_ops' to struct ide_port_info
  and ide_hwif_t.

* Set the default hwif->tp_ops in ide_init_port_data().

* Set host driver specific hwif->tp_ops in ide_init_port().

* Export ide_exec_command(), ide_read_status(), ide_read_altstatus(),
  ide_read_sff_dma_status(), ide_set_irq(), ide_tf_{load,read}()
  and ata_{in,out}put_data().

* Convert host drivers and core code to use struct ide_tp_ops.

* Remove no longer needed default_hwif_transport().

* Cleanup ide_hwif_t from methods that are now in struct ide_tp_ops.

While at it:

* Use struct ide_port_info in falconide.c and q40ide.c.

* Rename ata_{in,out}put_data() to ide_{in,out}put_data().

v2:

* Fix missing convertion in ns87415.c.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:56 +02:00
Bartlomiej Zolnierkiewicz
d6276b5f5c ide: add 'config' field to hw_regs_t
Add 'config' field to hw_regs_t and use it to set hwif->config_data in
ide_init_port_hw(), then convert ide_legacy_init_one() to use hw->config.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:56 +02:00
Bartlomiej Zolnierkiewicz
1f2efb82af ide: add ide_read_device() helper
Add ide_read_device() helper and convert do_probe() to use it
instead of ->INB.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:54 +02:00
Bartlomiej Zolnierkiewicz
4e65837b29 ide: use ->tf_load in actual_try_to_identify()
Convert actual_try_to_identify() to use ->tf_load instead of ->OUTB.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:53 +02:00
Bartlomiej Zolnierkiewicz
6e6afb3b74 ide: add ->set_irq method
Add ->set_irq method for setting nIEN bit of ATA Device Control
register and use it instead of ide_set_irq().

While at it:

* Use ->set_irq in init_irq() and do_reset1().

* Don't use HWIF() macro in ide_check_pm_state().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:52 +02:00
Bartlomiej Zolnierkiewicz
1f6d8a0fd8 ide: add ->read_altstatus method
* Remove ide_read_altstatus() inline helper.

* Add ->read_altstatus method for reading ATA Alternate Status
  register and use it instead of ->INB.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:52 +02:00
Bartlomiej Zolnierkiewicz
b73c7ee25d ide: add ->read_status method
* Remove ide_read_status() inline helper.

* Add ->read_status method for reading ATA Status register
  and use it instead of ->INB.

While at it:

* Don't use HWGROUP() macro.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:52 +02:00
Bartlomiej Zolnierkiewicz
c6dfa867bb ide: add ->exec_command method
Add ->exec_command method for writing ATA Command register
and use it instead of ->OUTBSYNC.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:51 +02:00
Bartlomiej Zolnierkiewicz
ebb00fb55d ide: factor out simplex handling from ide_pci_dma_base()
* Factor out simplex handling from ide_pci_dma_base() to
  ide_pci_check_simplex().

* Set hwif->dma_base early in ->init_dma method / ide_hwif_setup_dma()
  and reset it in ide_init_port() if DMA initialization fails.

* Use ->read_sff_dma_status instead of ->INB in ide_pci_dma_base().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:51 +02:00
Bartlomiej Zolnierkiewicz
c97c6aca75 ide: pass hw_regs_t-s to ide_device_add[_all]() (take 3)
* Add 'hw_regs_t **hws' argument to ide_device_add[_all]() and convert
  host drivers + ide_legacy_init_one() + ide_setup_pci_device[s]() to use
  it instead of calling ide_init_port_hw() directly.

  [ However if host has > 1 port we must still set hwif->chipset to hint
    consecutive ide_find_port() call that the previous slot is occupied. ]

* Unexport ide_init_port_hw().

v2:
* Use defines instead of hard-coded values in buddha.c, gayle.c and q40ide.c.
  (Suggested by Geert Uytterhoeven)

* Better patch description.

v3:
* Fix build problem in ide-cs.c. (Noticed by Stephen Rothwell)

There should be no functional changes caused by this patch.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23 19:55:50 +02:00