Commit Graph

74386 Commits

Author SHA1 Message Date
Mike Isely
1d70c7fdbb V4L/DVB (13497): pvrusb2: Shorten device hardware description text to work around V4L shortcoming
The device text description in pvrusb2-devattr.c get mapped into a V4L
API string field that is unfortunately shorter than I expected.  No
sense fighting City Hall here - this change shortens the descriptions
to fit the limit.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:10 -02:00
Mike Isely
568efaa2f7 V4L/DVB (13496): pvrusb2: Support manual extraction of 16KB FX2 firmware
This pvrusb2 change is in support of an existing feature used to help
identify and locate newer vendor supplied firmware.  This change makes
the feature work for the newer larger firmware size.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:09 -02:00
Mike Isely
c21c2db414 V4L/DVB (13495): pvrusb2: Support 16KB FX2 firmware
New FX2 firmware from Hauppauge is no longer 8KB in size - it's 16KB.
This is true for HVR-1950 and HVR-1900 devices.  Without this change,
new pvrusb2 users with that hardware are unable to use the driver
(because the CD shipped with the hardware only has the 16KB firmware).

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:09 -02:00
Igor M. Liplianin
09ea33e5c6 V4L/DVB (13493): TeVii S470 and TBS 6920 fixes
The new hardware design applied for this cards.
Silicon Labs C8051F300 microcontroller is used for LNB power control.
It connected to cx23885 GPIO pins:
 GPIO0 - P0.3 data
 GPIO1 - P0.2 reset
 GPIO2 - P0.1 clk
 GPIO3 - P0.0 busy
 Tevii S470 based on Montage Technology M88TS2020 digital satellite tuner
and M88DS3000 advanced DVB-S/S2 demodulator.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:08 -02:00
Jean-Francois Moine
6afd2aa856 V4L/DVB (13491): gspca - vc032x: Avoid crash on querymenu.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:08 -02:00
Jean-Francois Moine
c22c4a20a6 V4L/DVB (13490): gspca - ov534: Add controls for sensor ov965x.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:07 -02:00
Jean-Francois Moine
b8c8a5bf83 V4L/DVB (13489): gspca - sonixj: Add the sensor po1030.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:07 -02:00
Jean-Francois Moine
4e5cf58ecf V4L/DVB (13488): gspca - ov534: Remove extra values at end of ov965x sequences.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:07 -02:00
Jean-Francois Moine
569691a5a0 V4L/DVB (13487): gspca - ov534: Add svga, xga and sxga modes for ov965x.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:06 -02:00
Hans Verkuil
b8415f5314 V4L/DVB (13480): atbm8830: fix compile warning
Fix this trivial compile warning:

v4l/atbm8830.c:164: warning: 'set_agc_config' defined but not used

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:06 -02:00
Hans Verkuil
a7925eb3e4 V4L/DVB (13479): cxusb: fix compile warning
Fix this trivial compile warning:

v4l/cxusb.c:1195: warning: unused variable 'n'

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:06 -02:00
Hans Verkuil
7f3ea4debb V4L/DVB (13478): cx18: remove bogus init call.
The cx18 av core implemented an init call for no good reason. It's now
turned into an internal function.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:05 -02:00
Vaibhav Hiremath
d73bfc5fe6 V4L/DVB (13469): Davinci VPFE Capture: Add support for Control ioctls
Added support for Control IOCTL,
        - s_ctrl
        - g_ctrl
        - queryctrl

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:03 -02:00
Vaibhav Hiremath
8521363073 V4L/DVB (13467): V4L2: Added CID's V4L2_CID_ROTATE/BG_COLOR
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:02 -02:00
Vaibhav Hiremath
1ead696b4c V4L/DVB (13466): Davinci VPFE Capture:Replaced IRQ_VDINT1 with vpfe_dev->ccdc_irq1
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:02 -02:00
Vaibhav Hiremath
14cbaafe6f V4L/DVB (13465): Davinci VPFE Capture: Take i2c adapter id through platform data
The I2C adapter ID is actually depends on Board and may vary, Davinci
uses id=1, but in case of AM3517 id=3.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:01 -02:00
Vaibhav Hiremath
204e6ea981 V4L/DVB (13463): Davinci VPFE Capture: Specify device pointer in videobuf_queue_dma_contig_init
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:01 -02:00
Pete Eberlein
0b398f4f12 V4L/DVB (13455): go7007: Add struct v4l2_device.
This adds a struct v4l2_device to the go7007 device struct and registers
it during v4l2 initialization.  The v4l2_device registration overwrites
the go->dev device_data, which is a struct usb_interface with intfdata set
to the struct go7007.  This changes intfdata to point to the struct
v4l2_device inside struct go7007, which is what v4l2_device_register will
also set it to (and warn about non-null drvdata on register.)  Since usb
disconnect can happen any time, this intfdata should always be present.

Signed-off-by: Pete Eberlein <pete@sensoray.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:00 -02:00
Jean-Francois Moine
76dd272b56 V4L/DVB (13453): gspca - all subdrivers: Remove the unused frame ptr from pkt_scan().
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:59 -02:00
Jean-Francois Moine
d131c3c9e1 V4L/DVB (13452): gspca - main: Let the driver scan URB packets when no frame buffer.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:59 -02:00
Jean-Francois Moine
3ec342f250 V4L/DVB (13451): gspca - main: Memorize the current frame buffer.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:59 -02:00
Jean-Francois Moine
8157852f73 V4L/DVB (13450): gspca - main: Clear the urb status before resubmit.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:58 -02:00
Jean-Francois Moine
2d19a2c118 V4L/DVB (13449): gspca - ov534: The AWB control works only when autogain is set.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:58 -02:00
Jean-Francois Moine
4af8566858 V4L/DVB (13448): gspca - main: Add a gspca flag for inactive controls.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:57 -02:00
Andy Walls
7ce5c41db3 V4L/DVB (13446): ivtv: Add more explicit detection of known IR devices for Hauppauge cards
Avoid legacy IR I2C probing for PVR-150, PVR-500, and PVR-350 cards.  This
still probes, but restricts the possbile addresses probed per card.
Also removed legacy probe addresses for the KNC and PixelView cards which are
not supported by ivtv as far as I know.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:57 -02:00
Andy Walls
8352619043 V4L/DVB (13445): cx18: Use per cx18 instance init data for ir-kbd-i2c instead of const data
This change creates per cx18 instances of IR_i2c_init_data for handing over
initialization data to ir-kbd-i2c, since that module wants non-const data
even though it never modifies the data.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:57 -02:00
Andy Walls
ad2fe2d488 V4L/DVB (13444): ivtv: Add explicit IR controller initialization for the AVerTV M116
Add explicit support for the AVerTV M116 for use with the ir-kbd-i2c module.
This also eases future support for other AVerMedia ivtv boards with the same
microcontroller program at I2C address 0x40.

This is a reworked version of an earlier patch that was...

Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:56 -02:00
Andy Walls
bfbde8ee56 V4L/DVB (13443): ivtv: Defer legacy I2C IR probing until after setup of known I2C devices
This avoids collisions of legacy IR controller probing with known I2C devices
in the card definitions in ivtv-cards.c.  I2C driver modules for device listed
explicitly in a card definition should always take precedence over a probe
guessing where and IR controller may be.

Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:56 -02:00
Andy Walls
f412d36a8c V4L/DVB (13442): ivtv: Add module parameter to adjust I2C SCL clock period per board
Add a module parameter to adjust I2C SCL clock period per board.  This allows
some experimental fine tuning by end users to overcome quirky I2C device
problems.

Reported-by: "Aleksandr V. Piskunov" <aleksandr.v.piskunov@gmail.com>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:55 -02:00
Aleksandr V. Piskunov
e45e8f5cee V4L/DVB (13441): ivtv: Added FM radio support to Avermedia AVerTV MCE 116 Plus card
Signed-off-by: Aleksandr V. Piskunov <alexandr.v.piskunov@gmail.com>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:55 -02:00
Andy Walls
23bff27aaf V4L/DVB (13440): ivtv: Update the cards definitions to add another AVerMedia M113 variant
Add an AVerMedia M113 variant that was...

Reported-by: Hiemanshu Sharma <hiemanshu@fedoraproject.org>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:55 -02:00
Antoine Jacquet
9018f6c3a2 V4L/DVB (13438): zr364xx: add support for Trust Powerc@m 910Z
Tested-by: Enrique Dominguez <enrique.pinos@gmail.com>
Signed-off-by: Antoine Jacquet <royale@zerezo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:54 -02:00
Andy Walls
543ae45a7f V4L/DVB (13434): cx18: Bump version number due to significant buffer handling changes.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:54 -02:00
Andy Walls
ad689d54f9 V4L/DVB (13433): cx18: Remove duplicate list traversal when processing incoming MDLs
Update the incoming MDL's buffers' bytesused and sync the buffers for the cpu
in one pass instead of two.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:53 -02:00
Andy Walls
127ce5f0ad V4L/DVB (13432): cx18: Adjust encoder VBI MDL size to be exactly frame's worth of VBI data
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:53 -02:00
Andy Walls
1047a83844 V4L/DVB (13431): cx18: Adjust an MDL's final buffer size to force encoder transfer size
The encoder was not honoring the MDL size sent in DE_SET_MDL mailbox commands.
This change adjusts the size of the last buffer in an MDL, as reported to the
firmware, so that the encoder will send the exact amount of bytes we specify
per MDL transfer.  This eliminates tearing in YUV playback when using
non-default YUV buffer sizes.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:52 -02:00
Andy Walls
22dce188ef V4L/DVB (13430): cx18: Fix YUV capture so that encoder passes a single frame per transfer
Fix YUV capture such that the encoder will pass one frame per transfer.  This
will allow the application to maintain frame alignment when a transfer from
the encoder is missed due to high system latency in service the CX23418 IRQ.

Also force YUV buffer sizes to be specified in multiples of 33.75 kB, the
smalled amount of buffer sizes need to store a complete set of HM12 4:2:0
macroblocks specifying 32 lines of the frame.  A full 60Hz/525 line
screen requires 15 * 33.75 kB per frame and a full 50Hz/625 line screen
requires 18 * 33.75 kB per frame so the default buffer size is 3 * 33.75 kB,
requiring exactly 5 or 6 buffers per MDL respectively.  The bytes needed per
frame and hence MDL need not be the bytes in an integer number of buffers.
However, if frame artifacts are seen with scaled screen sizes, the YUV buffer
size can be set 34 kB (33.75 kB) to get rid of the artifacts at the cost of more
copies between the kernel and userspace.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:52 -02:00
Andy Walls
52fcb3ecc6 V4L/DVB (13429): cx18: Add Memory Descriptor List (MDL) layer to buffer handling
Add a Memory Descriptor List (MDL) layer to buffer handling to implement
scatter-gather I/O.  Currently there is still only 1 buffer per MDL.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:51 -02:00
Andy Walls
fa655dda5c V4L/DVB (13428): cx18: Rename mdl_offset to mdl_base_idx or free_mdl_idx as appropriate
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:51 -02:00
Andy Walls
c37b11bf17 V4L/DVB (13427): cx18: Rename struct cx18_queue.buffers to struct cx18_queue.depth
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:51 -02:00
Andy Walls
f0076e60b5 V4L/DVB (13426): cx18: Rename struct cx18_mdl to struct cx18_mdl_ent
Rename type in anticipation of implementing a struct cx18_mdl type that
actually keeps track of a memory descriptor list.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:50 -02:00
Jean-Francois Moine
c76e6f1166 V4L/DVB (13425): gspca - ov534: Bad name of the ov965x 320x240 resolution.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:50 -02:00
Jean-Francois Moine
69f1fe28f0 V4L/DVB (13424): gspca - ov534: Fix ov772x brightness and ov965x frame rate.
- the ov772x brightness was not setteble (fixed by M. Thrun)
- the set_frame_rate function does not work for ov965x

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:49 -02:00
Jean-Francois Moine
b014f94b28 V4L/DVB (13423): gspca - ov534: More ov772x changes from Max Thrun.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:49 -02:00
Jean-Francois Moine
189d92af70 V4L/DVB (13422): gspca - ov534: ov772x changes from Richard Kaswy.
- 320x240 resolution added
- controls added
- different sd_desc tables

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:49 -02:00
Jean-Francois Moine
4bdf4a8342 V4L/DVB (13421): gspca - main: Clearer message when bandwidth too small.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:48 -02:00
Márton Németh
6763cc0e54 V4L/DVB (13419): gspca - pac7302: Add debug register write interface.
Add debug register write interface to pac7302 to be able to set
for example the edge detect mode (bit 2 register 0x55) or the
test pattern (bit 0..3, register 0x72) and test overlay (bit 4,
register 0x72) from the user space. Only write of register
page 0 is supported by this patch.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:47 -02:00
Márton Németh
4d0fc03a76 V4L/DVB (13418): gspca - pac7311: Stop sending URBs on first error.
Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:47 -02:00
Jonathan Corbet
f8b0bca1a7 V4L/DVB (13417): Fix videobuf_queue_vmalloc_init() prototype
For whatever reason, the device structure pointer to
videobuf_queue_vmalloc_init is typed "void *", even though it's passed
right through to videobuf_queue_core_init(), which expects a struct
device pointer.  The other videobuf implementations use struct device *;
I think vmalloc should too.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:47 -02:00
Márton Németh
f58d785669 V4L/DVB (13416): smssdio: initialize return value
The return value may be used uninitialized when the size parameter
happens to be 0.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:46 -02:00