Commit Graph

206 Commits

Author SHA1 Message Date
NeilBrown
a778b73ff7 md: fix bug with linear hot-add and elsewhere
Adding a drive to a linear array seems to have stopped working, due to changes
elsewhere in md, and insufficient ongoing testing...

So the patch to make linear hot-add work in the first place introduced a
subtle bug elsewhere that interracts poorly with older version of mdadm.

This fixes it all up.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23 20:14:14 -07:00
NeilBrown
435b71be20 md: improve the is_mddev_idle test
During a 'resync' or similar activity, md checks if the devices in the
array are otherwise active and winds back resync activity when they are.
This test in done in is_mddev_idle, and it is somewhat fragile - it
sometimes thinks there is non-sync io when there isn't.

The test compares the total sectors of io (disk_stat_read) with the sectors
of resync io (disk->sync_io).  This has problems because total sectors gets
updated when a request completes, while resync io gets updated when the
request is submitted.  The time difference can cause large differenced
between the two which do not actually imply non-resync activity.  The test
currently allows for some fuzz (+/- 4096) but there are some cases when it
is not enough.

The test currently looks for any (non-fuzz) difference, either positive or
negative.  This clearly is not needed.  Any non-sync activity will cause
the total sectors to grow faster than the sync_io count (never slower) so
we only need to look for a positive differences.

If we do this then the amount of in-flight sync io will never cause the
appearance of non-sync IO.  Once enough non-sync IO to worry about starts
happening, resync will be slowed down and the measurements will thus be
more precise (as there is less in-flight) and control of resync will still
be suitably responsive.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:37 -07:00
Linus Torvalds
44ce6294d0 Revert "md: improve partition detection in md array"
This reverts commit 5b479c91da.

Quoth Neil Brown:

  "It causes an oops when auto-detecting raid arrays, and it doesn't
   seem easy to fix.

   The array may not be 'open' when do_md_run is called, so
   bdev->bd_disk might be NULL, so bd_set_size can oops.

   This whole approach of opening an md device before it has been
   assembled just seems to get more and more painful.  I think I'm going
   to have to come up with something clever to provide both backward
   comparability with usage expectation, and sane integration into the
   rest of the kernel."

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 18:51:36 -07:00
NeilBrown
5b479c91da md: improve partition detection in md array
md currently uses ->media_changed to make sure rescan_partitions
is call on md array after they are assembled.

However that doesn't happen until the array is opened, which is later
than some people would like.

So use blkdev_ioctl to do the rescan immediately that the
array has been assembled.

This means we can remove all the ->change infrastructure as it was only used
to trigger a partition rescan.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:57 -07:00
NeilBrown
08a02ecd28 md: allow reshape_position for md arrays to be set via sysfs
"reshape_position" records how much progress has been made on a "reshape"
(adding drives, changing layout or chunksize).

When it is set, the number of drives, layout and chunksize can have
two possible values, an old an a new.

So allow these different values to be visible, and allow both old and new to
be set: Set the old ones first, then the reshape_position, then the new
values.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:57 -07:00
NeilBrown
4d167f0937 md: stop using csum_partial for checksum calculation in md
If CONFIG_NET is not selected, csum_partial is not exported, so md.ko cannot
use it.  We shouldn't really be using csum_partial anyway as it is an
internal-to-networking interface.

So replace it with C code to do the same thing.  Speed is not crucial here, so
something simple and correct is best.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:57 -07:00
NeilBrown
e11e93facc md: move test for whether level supports bitmap to correct place
We need to check for internal-consistency of superblock in load_super.
validate_super is for inter-device consistency.

With the test in the wrong place, a badly created array will confuse md rather
an produce sensible errors.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:57 -07:00
Martin Peschke
c3f94b40e1 md: cleanup: use seq_release_private() where appropriate
We can save some lines of code by using seq_release_private().

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:57 -07:00
Ahmed S. Darwish
50511da3da drivers/md.c: Use ARRAY_SIZE macro when appropriate
Use ARRAY_SIZE macro already defined in kernel.h

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:57 -07:00
Peter Zijlstra
f98393a64c mm: remove destroy_dirty_buffers from invalidate_bdev()
Remove the destroy_dirty_buffers argument from invalidate_bdev(), it hasn't
been used in 6 years (so akpm says).

find * -name \*.[ch] | xargs grep -l invalidate_bdev |
while read file; do
	quilt add $file;
	sed -ie 's/invalidate_bdev(\([^,]*\),[^)]*)/invalidate_bdev(\1)/g' $file;
done

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:55 -07:00
NeilBrown
5792a2856a [PATCH] md: avoid a deadlock when removing a device from an md array via sysfs
A device can be removed from an md array via e.g.
  echo remove > /sys/block/md3/md/dev-sde/state

This will try to remove the 'dev-sde' subtree which will deadlock
since
  commit e7b0d26a86

With this patch we run the kobject_del via schedule_work so as to
avoid the deadlock.

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-04 21:12:47 -07:00
NeilBrown
5e55e2f5fc [PATCH] md: convert compile time warnings into runtime warnings
...  still not sure why we need this ....

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-27 09:05:15 -07:00
NeilBrown
041ae52e26 [PATCH] md: clear the congested_fn when stopping a raid5
If this mddev and queue got reused for another array that doesn't register a
congested_fn, this function would get called incorretly.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-27 09:05:14 -07:00
NeilBrown
b4c4c7b809 [PATCH] md: restart a (raid5) reshape that has been aborted due to a read/write error
An error always aborts any resync/recovery/reshape on the understanding that
it will immediately be restarted if that still makes sense.  However a reshape
currently doesn't get restarted.  With this patch it does.

To avoid restarting when it is not possible to do work, we call into the
personality to check that a reshape is ok, and strengthen raid5_check_reshape
to fail if there are too many failed devices.

We also break some code out into a separate function: remove_and_add_spares as
the indent level for that code was getting crazy.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 14:53:36 -08:00
NeilBrown
d1b5380c7f [PATCH] md: clean out unplug and other queue function on md shutdown
The mddev and queue might be used for another array which does not set these,
so they need to be cleared.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 14:53:36 -08:00
NeilBrown
7dd5e7c3db [PATCH] md: move warning about creating a raid array on partitions of the one device
md tries to warn the user if they e.g.  create a raid1 using two partitions of
the same device, as this does not provide true redundancy.

However it also warns if a raid0 is created like this, and there is nothing
wrong with that.

At the place where the warning is currently printer, we don't necessarily know
what level the array will be, so move the warning from the point where the
device is added to the point where the array is started.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 14:53:36 -08:00
Eric W. Biederman
0b4d414714 [PATCH] sysctl: remove insert_at_head from register_sysctl
The semantic effect of insert_at_head is that it would allow new registered
sysctl entries to override existing sysctl entries of the same name.  Which is
pain for caching and the proc interface never implemented.

I have done an audit and discovered that none of the current users of
register_sysctl care as (excpet for directories) they do not register
duplicate sysctl entries.

So this patch simply removes the support for overriding existing entries in
the sys_sysctl interface since no one uses it or cares and it makes future
enhancments harder.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Corey Minyard <minyard@acm.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: David Chinner <dgc@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:59 -08:00
Eric W. Biederman
ff1d28efc5 [PATCH] sysctl: md: remove unnecessary insert_at_head flag
The sysctls used by the md driver are have unique binary numbers so remove the
insert_at_head flag as it serves no useful purpose.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:55 -08:00
Arjan van de Ven
fa027c2a0a [PATCH] mark struct file_operations const 4
Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

[akpm@sdl.org: dvb fix]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:45 -08:00
NeilBrown
2a2275d630 [PATCH] md: fix potential memalloc deadlock in md
If a GFP_KERNEL allocation is attempted in md while the mddev_lock is held,
it is possible for a deadlock to eventuate.

This happens if the array was marked 'clean', and the memalloc triggers a
write-out to the md device.

For the writeout to succeed, the array must be marked 'dirty', and that
requires getting the mddev_lock.

So, before attempting a GFP_KERNEL allocation while holding the lock, make
sure the array is marked 'dirty' (unless it is currently read-only).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:51:00 -08:00
NeilBrown
1031be7a5f [PATCH] md: make sure the events count in an md array never returns to zero
Now that we sometimes step the array events count backwards (when
transitioning dirty->clean where nothing else interesting has happened - so
that we don't need to write to spares all the time), it is possible for the
event count to return to zero, which is potentially confusing and triggers and
MD_BUG.

We could possibly remove the MD_BUG, but is just as easy, and probably safer,
to make sure we never return to zero.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26 13:50:59 -08:00
NeilBrown
3f9d7b0d81 [PATCH] md: fix a few problems with the interface (sysfs and ioctl) to md
While developing more functionality in mdadm I found some bugs in md...

- When we remove a device from an inactive array (write 'remove' to
  the 'state' sysfs file - see 'state_store') would should not
  update the superblock information - as we may not have
  read and processed it all properly yet.

- initialise all raid_disk entries to '-1' else the 'slot sysfs file
  will claim '0' for all devices in an array before the array is
  started.

- all '\n' not to be present at the end of words written to
  sysfs files

- when we use SET_ARRAY_INFO to set the md metadata version,
  set the flag to say that there is persistant metadata.

- allow GET_BITMAP_FILE to be called on an array that hasn't
  been started yet.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-22 08:55:51 -08:00
NeilBrown
1757128438 [PATCH] md: assorted md and raid1 one-liners
Fix few bugs that meant that:
  - superblocks weren't alway written at exactly the right time (this
    could show up if the array was not written to - writting to the array
    causes lots of superblock updates and so hides these errors).

  - restarting device recovery after a clean shutdown (version-1 metadata
    only) didn't work as intended (or at all).

1/ Ensure superblock is updated when a new device is added.
2/ Remove an inappropriate test on MD_RECOVERY_SYNC in md_do_sync.
   The body of this if takes one of two branches depending on whether
   MD_RECOVERY_SYNC is set, so testing it in the clause of the if
   is wrong.
3/ Flag superblock for updating after a resync/recovery finishes.
4/ If we find the neeed to restart a recovery in the middle (version-1
   metadata only) make sure a full recovery (not just as guided by
   bitmaps) does get done.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:21 -08:00
Jeff Garzik
fdee8ae449 [PATCH] MD: conditionalize some code
The autorun code is only used if this module is built into the static
kernel image.  Adjust #ifdefs accordingly.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:21 -08:00
NeilBrown
0d4ca600fc [PATCH] md: tidy up device-change notification when an md array is stopped
An md array can be stopped leaving all the setting still in place, or it can
torn down and destroyed.  set_capacity and other change notifications only
happen in the latter case, but should happen in both.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:57:20 -08:00
Josef Sipek
c649bb9c55 [PATCH] struct path: convert md
Signed-off-by: Josef Sipek <jsipek@fsl.cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:47 -08:00
NeilBrown
d63a5a74de [PATCH] lockdep: avoid lockdep warning in md
md_open takes ->reconfig_mutex which causes lockdep to complain.  This
(normally) doesn't have deadlock potential as the possible conflict is with a
reconfig_mutex in a different device.

I say "normally" because if a loop were created in the array->member hierarchy
a deadlock could happen.  However that causes bigger problems than a deadlock
and should be fixed independently.

So we flag the lock in md_open as a nested lock.  This requires defining
mutex_lock_interruptible_nested.

Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:39 -08:00
Peter Zijlstra
2e7b651df1 [PATCH] remove the old bd_mutex lockdep annotation
Remove the old complex and crufty bd_mutex annotation.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:38 -08:00
Nigel Cunningham
7dfb71030f [PATCH] Add include/linux/freezer.h and move definitions from sched.h
Move process freezing functions from include/linux/sched.h to freezer.h, so
that modifications to the freezer or the kernel configuration don't require
recompiling just about everything.

[akpm@osdl.org: fix ueagle driver]
Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:27 -08:00
Rafael J. Wysocki
4b438a23fb [PATCH] md: do not freeze md threads for suspend
If there's a swap file on a software RAID, it should be possible to use this
file for saving the swsusp's suspend image.  Also, this file should be
available to the memory management subsystem when memory is being freed before
the suspend image is created.

For the above reasons it seems that md_threads should not be frozen during the
suspend and the appended patch makes this happen, but then there is the
question if they don't cause any data to be written to disks after the suspend
image has been created, provided that all filesystems are frozen at that time.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08 18:29:24 -08:00
NeilBrown
2f47130361 [PATCH] md: change ONLINE/OFFLINE events to a single CHANGE event
It turns out that CHANGE is preferred to ONLINE/OFFLINE for various reasons
(not least of which being that udev understands it already).

So remove the recently added KOBJ_OFFLINE (no-one is likely to care anyway)
and change the ONLINE to a CHANGE event

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08 18:29:23 -08:00
NeilBrown
7870db4c7f [PATCH] md: send online/offline uevents when an md array starts/stops
This allows udev to do something intelligent when an array becomes
available.

Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03 12:27:55 -08:00
NeilBrown
01ab5662f5 [PATCH] md: simplify checking of available size when resizing an array
When "mdadm --grow --size=xxx" is used to resize an array (use more or less of
each device), we check the new siza against the available space in each
device.

We already have that number recorded in rdev->size, so calculating it is
pointless (and wrong in one obscure case).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28 11:30:51 -07:00
NeilBrown
2b6e845986 [PATCH] md: fix bug where spares don't always get rebuilt properly when they become live
If save_raid_disk is >= 0, then the device could be a device that is already
in sync that is being re-added.  So we need to default this value to -1.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28 11:30:51 -07:00
NeilBrown
1c05b4bc22 [PATCH] md: endian annotation for v1 superblock access
Includes a couple of bugfixes found by sparse.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-21 13:35:05 -07:00
Akinobu Mita
e24650c2e7 [PATCH] md: fix /proc/mdstat refcounting
I have seen mdadm oops after successfully unloading md module.

This patch privents from unloading md module while
mdadm is polling /proc/mdstat.

Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Akinbou Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 08:18:43 -07:00
NeilBrown
5842730de1 [PATCH] md: fix bug where new drives added to an md array sometimes don't sync properly
This fixes a bug introduced in 2.6.18.

If a drive is added to a raid1 using older tools (mdadm-1.x or raidtools)
then it will be included in the array without any resync happening.

It has been submitted for 2.6.18.1.

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06 08:53:41 -07:00
Eric Sesterhenn
52e5f9d1cf BUG_ON cleanup for drivers/md/
This changes two if() BUG(); usages to BUG_ON(); so people
can disable it safely.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:33:23 +02:00
NeilBrown
3a0f5bbb1a [PATCH] md: add error reporting to superblock write failure
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:19 -07:00
NeilBrown
e8703fe1f5 [PATCH] md: remove MAX_MD_DEVS which is an arbitrary limit
Once upon a time we needed to fixed limit to the number of md devices,
probably because we preallocated some array.  This need no longer exists, but
we still have an arbitrary limit.

So remove MAX_MD_DEVS and allow as many devices as we can fit into the 'minor'
part of a device number.

Also remove some useless noise at init time (which reports MAX_MD_DEVS) and
remove MD_THREAD_NAME_MAX which hasn't been used for a while.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:18 -07:00
NeilBrown
61df9d91e9 [PATCH] md: make messages about resync/recovery etc more specific
It is possible to request a 'check' of an md/raid array where the whole array
is read and consistancies are reported.

This uses the same mechanisms as 'resync' and so reports in the kernel logs
that a resync is being started.  This understandably confuses/worries people.

Also the text in /proc/mdstat suggests a 'resync' is happen when it is just a
check.

This patch changes those messages to be more specific about what is happening.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:18 -07:00
Paul Clements
9b1d1dac18 [PATCH] md: new sysfs interface for setting bits in the write-intent-bitmap
Add a new sysfs interface that allows the bitmap of an array to be dirtied.
The interface is write-only, and is used as follows:

echo "1000" > /sys/block/md2/md/bitmap

(dirty the bit for chunk 1000 [offset 0] in the in-memory and on-disk
bitmaps of array md2)

echo "1000-2000" > /sys/block/md1/md/bitmap

(dirty the bits for chunks 1000-2000 in md1's bitmap)

This is useful, for example, in cluster environments where you may need to
combine two disjoint bitmaps into one (following a server failure, after a
secondary server has taken over the array).  By combining the bitmaps on
the two servers, a full resync can be avoided (This was discussed on the
list back on March 18, 2005, "[PATCH 1/2] md bitmap bug fixes" thread).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:17 -07:00
NeilBrown
850b2b420c [PATCH] md: replace magic numbers in sb_dirty with well defined bit flags
Instead of magic numbers (0,1,2,3) in sb_dirty, we have
some flags instead:
MD_CHANGE_DEVS
   Some device state has changed requiring superblock update
   on all devices.
MD_CHANGE_CLEAN
   The array has transitions from 'clean' to 'dirty' or back,
   requiring a superblock update on active devices, but possibly
   not on spares
MD_CHANGE_PENDING
   A superblock update is underway.

We wait for an update to complete by waiting for all flags to be clear.  A
flag can be set at any time, even during an update, without risk that the
change will be lost.

Stop exporting md_update_sb - isn't needed.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:17 -07:00
Adrian Bunk
fbedac04fa [PATCH] md: the scheduled removal of the START_ARRAY ioctl for md
This patch contains the scheduled removal of the START_ARRAY ioctl for md.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:16 -07:00
NeilBrown
8469219596 [PATCH] md: avoid backward event updates in md superblock when degraded.
If we
  - shut down a clean array,
  - restart with one (or more) drive(s) missing
  - make some changes
  - pause, so that they array gets marked 'clean',
the event count on the superblock of included drives
will be the same as that of the removed drives.
So adding the removed drive back in will cause it
to be included with no resync.

To avoid this, we only update the eventcount backwards when the array
is not degraded.  In this case there can (should) be no non-connected
drives that we can get confused with, and this is the particular case
where updating-backwards is valuable.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27 11:01:31 -07:00
Andrew Morton
d0a0a5ee7a [PATCH] md: fix oops in error-handling
During early MD setup (superblock reading), we don't have a personality yet.
But the error-handling code tries to dereference mddev->pers.  Fix.

Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:17 -07:00
NeilBrown
67463acb64 [PATCH] md: require CAP_SYS_ADMIN for (re-)configuring md devices via sysfs
The ioctl requires CAP_SYS_ADMIN, so sysfs should too.  Note that we don't
require CAP_SYS_ADMIN for reading attributes even though the ioctl does.
There is no reason to limit the read access, and much of the information is
already available via /proc/mdstat

Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:17 -07:00
NeilBrown
80ca3a44f5 [PATCH] md: unify usage of symbolic names for perms
Some places we use number (0660) someplaces names (S_IRUGO).  Change all
numbers to be names, and change 0655 to be what it should be.

Also make some formatting more consistent.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:17 -07:00
NeilBrown
ff4e8d9a9f [PATCH] md: fix resync speed calculation for restarted resyncs
We introduced 'io_sectors' recently so we could count the sectors that causes
io during resync separate from sectors which didn't cause IO - there can be a
difference if a bitmap is being used to accelerate resync.

However when a speed is reported, we find the number of sectors processed
recently by subtracting an oldish io_sectors count from a current
'curr_resync' count.  This is wrong because curr_resync counts all sectors,
not just io sectors.

So, add a field to mddev to store the curren io_sectors separately from
curr_resync, and use that in the calculations.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:16 -07:00
NeilBrown
0b8c9de05c [PATCH] md: delay starting md threads until array is completely setup
When an array is started we start one or two threads (two if there is a
reshape or recovery that needs to be completed).

We currently start these *before* the array is completely set up and in
particular before queue->queuedata is set.  If the thread actually starts
very quickly on another CPU, we can end up dereferencing queue->queuedata
and oops.

This patch also makes sure we don't try to start a recovery if a reshape is
being restarted.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:16 -07:00