Commit Graph

356 Commits

Author SHA1 Message Date
Paul Mackerras
79905ad50b agp/uninorth: Fix oops caused by flushing too much
This fixes a sporadic oops at boot on G5 Power Macs.  The table_end
variable has the address of the last byte of the table.  Adding on
PAGE_SIZE means we flush too much, and if the page after the table
is not mapped for any reason, the kernel will oops.  Instead we add
on 1 because flush_dcache_range() interprets its second argument as
the first byte past the range to be flushed.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-02 17:50:37 +10:00
Linus Torvalds
709d015bb8 Merge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (41 commits)
  drm/i915: add HAS_BSD check to i915_getparam
  drm/i915: Honor sync polarity from VBT panel timing descriptors
  drm/i915: Unmask interrupt for render engine on Sandybridge
  drm/i915: Fix PIPE_CONTROL command on Sandybridge
  drm/i915: Fix up address spaces in slow_kernel_write()
  drm/i915: Use non-atomic kmap for slow copy paths
  drm/i915: Avoid moving from CPU domain during pwrite
  drm/i915: Cleanup after failed initialization of ringbuffers
  drm/i915: Reject bind_to_gtt() early if object > aperture
  drm/i915: Check error code whilst moving buffer to GTT domain.
  drm/i915: Remove spurious warning "Failure to install fence"
  drm/i915: Rebind bo if currently bound with incorrect alignment.
  drm/i915: Include pitch in set_base debug statement.
  drm/i915: Only print "nothing to do" debug message as required.
  drm/i915: Propagate error from unbinding an unfenceable object.
  drm/i915: Avoid nesting of domain changes when setting display plane
  drm/i915: Hold the spinlock whilst resetting unpin_work along error path
  drm/i915: Only print an message if there was an error
  drm/i915: Clean up leftover bits from hws move to ring structure.
  drm/i915: Add CxSR support on Pineview DDR3
  ...
2010-06-01 14:12:27 -07:00
Chris Wilson
f1befe71fa agp/intel: Restrict GTT mapping to valid range on i915 and i945
References:

  Bug 15733 - Crash when accessing nonexistent GTT entries in i915
  https://bugzilla.kernel.org/show_bug.cgi?id=15733

On G33 and above, the size of the GTT space is determined by the GMCH
control register. Prior to this revision, the size is determined by the
size of the aperture. So we must careful to map and fill the appropriate
range depending on chipset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-26 14:10:27 -07:00
Linus Torvalds
31f4671799 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  agp: amd64, fix pci reference leaks
  drm/edid: Allow non-fatal checksum errors in CEA blocks
  drm/radeon/kms: suppress a build warning (unused variable)
  drm: Fixes linux-next & linux-2.6 checkstack warnings:
  nouveau: fix acpi_lid_open undefined
  drm/radeon/kms: release AGP bridge at suspend
2010-05-26 12:30:09 -07:00
Jiri Slaby
2101d6f7ac agp: amd64, fix pci reference leaks
Stanse found pci reference leaks in uli_agp_init and nforce3_agp_init
initialization functions.

The PCI devices are bridges, so it's not critical, but still worth fixing.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-26 12:54:39 +10:00
Linus Torvalds
59534f7298 Merge branch 'drm-for-2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-for-2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (207 commits)
  drm/radeon/kms/pm/r600: select the mid clock mode for single head low profile
  drm/radeon: fix power supply kconfig interaction.
  drm/radeon/kms: record object that have been list reserved
  drm/radeon: AGP memory is only I/O if the aperture can be mapped by the CPU.
  drm/radeon/kms: don't default display priority to high on rs4xx
  drm/edid: fix typo in 1600x1200@75 mode
  drm/nouveau: fix i2c-related init table handlers
  drm/nouveau: support init table i2c device identifier 0x81
  drm/nouveau: ensure we've parsed i2c table entry for INIT_*I2C* handlers
  drm/nouveau: display error message for any failed init table opcode
  drm/nouveau: fix init table handlers to return proper error codes
  drm/nv50: support fractional feedback divider on newer chips
  drm/nv50: fix monitor detection on certain chipsets
  drm/nv50: store full dcb i2c entry from vbios
  drm/nv50: fix suspend/resume with DP outputs
  drm/nv50: output calculated crtc pll when debugging on
  drm/nouveau: dump pll limits entries when debugging is on
  drm/nouveau: bios parser fixes for eDP boards
  drm/nouveau: fix a nouveau_bo dereference after it's been destroyed
  drm/nv40: remove some completed ctxprog TODOs
  ...
2010-05-21 11:14:52 -07:00
Ben Hutchings
6fd0248939 amd64-agp: Probe unknown AGP devices the right way
The current initialisation code probes 'unsupported' AGP devices
simply by calling its own probe function.  It does not lock these
devices or even check whether another driver is already bound to
them.

We must use the device core to manage this.  So if the specific
device id table didn't match anything and agp_try_unsupported=1,
switch the device id table and call driver_attach() again.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-19 10:13:19 +10:00
Ben Hutchings
d831692a1a sis-agp: Remove SIS 760, handled by amd64-agp
SIS 760 is listed in the device tables for both amd64-agp and sis-agp.
amd64-agp is apparently preferable since it has workarounds for some
BIOS misconfigurations that sis-agp doesn't handle.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-19 10:11:23 +10:00
Bill Pemberton
83897badcb agp: use NULL instead of 0 when pointer is needed
Fixes sparse warning:

drivers/char/agp/generic.c:1217:33: warning: Using plain integer as
NULL pointer

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
CC: linux-kernel@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11 10:11:09 +02:00
Jerome Glisse
61cf059325 agp: use scratch page on memory remove and at GATT creation V4
Convert most AGP chipset to use scratch page as default entries.
This help avoiding GPU querying 0 address and trigger computer
fault. With KMS and memory manager we bind/unbind AGP memory
constantly and it seems that some GPU are still doing AGP
traffic even after GPU report being idle with the memory segment.

Tested (radeon GPU KMS + Xorg + compiz + glxgears + quake3) on :
- SIS 1039:0001 & 1039:0003
- Intel 865 8086:2571

Compile tested for other bridges

V2 enable scratch page on uninorth
V3 fix unbound check in uninorth insert memory (Michel Dänzer)
V4 rebase on top of drm-next branch with the lastest intel AGP
   changeset (stable should use version V3 of the patch)

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-23 13:59:18 +10:00
Dave Airlie
10fd883ce3 agp/intel: put back check that we have a driver for the bridge.
On my 945 laptop + radeon GPU, I was getting an oops on boot without this
check which seems to have gotten dropped in the rework.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 16:38:18 +10:00
Dave Airlie
97921a5b03 Merge remote branch 'anholt/drm-intel-next' of /home/airlied/kernel/drm-next into drm-core-next
* 'anholt/drm-intel-next' of /home/airlied/kernel/drm-next: (48 commits)
  agp/intel-gtt: kill previous_size assignments
  agp/intel-gtt: kill intel_i830_tlbflush
  agp/intel: split out gmch/gtt probe, part 1
  agp/intel: kill mutli_gmch_chip
  agp/intel: uncoditionally reconfigure driver on resume
  agp/intel: split out the GTT support
  agp/intel: introduce intel-agp.h header file
  drm/i915: Don't touch PORT_HOTPLUG_EN in intel_dp_detect()
  drm/i915/pch: Use minimal number of FDI lanes (v2)
  drm/i915: Add the support of memory self-refresh on Ironlake
  drm/i915: Move Pineview CxSR and watermark code into update_wm hook.
  drm/i915: Only save/restore FBC on the platform that supports FBC
  drm/i915: Fix the incorrect argument for SDVO SET_TV_format command
  drm/i915: Add support of SDVO on Ibexpeak PCH
  drm/i915: Don't enable pipe/plane/VCO early (wait for DPMS on).
  drm/i915: do not read uninitialized ->dev_private
  Revert "drm/i915: Use a dmi quirk to skip a broken SDVO TV output."
  drm/i915: implement multifunction SDVO device support
  drm/i915: remove unused intel_pipe_get_connector()
  drm/i915: remove connector object in old output structure
  ...
2010-04-20 13:11:45 +10:00
Daniel Vetter
e158316567 agp/intel-gtt: kill previous_size assignments
Not needed for the GTT and inconsistent: Sometimes the _new_ size
was stored there ...

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-18 17:40:10 -07:00
Daniel Vetter
1ca46bd134 agp/intel-gtt: kill intel_i830_tlbflush
We don't use the generic insert/remove_memory functions that
require this. So kill this useless code.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-18 17:39:39 -07:00
Daniel Vetter
22dd82a3f5 agp/intel: split out gmch/gtt probe, part 1
This is essentially the last piece of code that's tying intel-gtt.c
to intel-agp.c. Extract the probe code into it's own function so that
it can be moved to intel-gtt.c.

This requires some slight changes in the ordering of device probe function.
This patch just implements that for better bisectability in case this
introduces bugs.

The biggest change is that the gmch/gtt code doesn't execute a pci
resource fixup anymore. I've dug around in historical git trees, and
this change is to support the agp port on an old HP server with the
i440 intel chipset. So only needed for the agp driver.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-18 17:37:46 -07:00
Daniel Vetter
059efc670d agp/intel: kill mutli_gmch_chip
Always zero, i.e. unused.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-18 17:36:26 -07:00
Daniel Vetter
e5a04d52e6 agp/intel: uncoditionally reconfigure driver on resume
Only two drivers were not in this table (7505 and g33), both non-mobile
chipsets. So they were most likely just missing. This is another step
to untangle the gtt from the agp driver.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-18 17:36:11 -07:00
Daniel Vetter
f51b766211 agp/intel: split out the GTT support
intel-agp.c contains actually two different drivers: An agp driver
for _physical_ agp slots an the gtt driver that is used by the intel
drm modules. Split them to prevent any further confusion.

This patch just moves the code and includes intel-gtt.c in intel-agp.c
Later patches will untangle these two drivers further.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-18 17:35:47 -07:00
Daniel Vetter
ff7cdd691a agp/intel: introduce intel-agp.h header file
Intel definitions have spilled into agp.h. Create a header file for
them and also include it in efficion-agp.c 'cause it needs a few of
them.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-18 17:33:02 -07:00
Linus Torvalds
13bd8e4673 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: Ignore LVDS EDID when it is unavailabe or invalid
  drm/i915: Add no_lvds entry for the Clientron U800
  drm/i915: Rename many remaining uses of "output" to encoder or connector.
  drm/i915: Rename intel_output to intel_encoder.
  agp/intel: intel_845_driver is an agp driver!
  drm/i915: introduce to_intel_bo helper
  drm/i915: Disable FBC on 915GM and 945GM.
2010-04-17 14:28:50 -07:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Daniel Vetter
5e64499f3d agp/intel: intel_845_driver is an agp driver!
... not a GTT driver. So the additional chipset flush introduced in

commit 2162e6a2b0
Author: Dave Airlie <airlied@redhat.com>
Date:   Wed Nov 21 16:36:31 2007 +1000

    agp/intel: Add chipset flushing support for i8xx chipsets.

to fix a GTT problem makes absolutely no sense. If this would really be needed
for AGP chipsets, too, we should add it to all i8xx agp drivers, not just one.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-25 11:06:17 -07:00
Eric Anholt
66f6ff09ff agp/intel: Don't do the chipset flush on Sandybridge.
This CPU should be coherent with graphics in this direction, though
flushing graphics caches are still required.  Fixes a system reset on
module load on Sandybridge with 4G+ memory.

Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-18 16:48:00 -07:00
Eric Anholt
285aca8e2a agp/intel: Respect the GTT size on Sandybridge for scratch page setup.
This is similar to 14bc490bbd which
respected it for how much of the GTT we would actually use.  Now we
won't clear beyond allocated memory when filling the GTT with scratch
page addresses.

Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-18 16:47:59 -07:00
Linus Torvalds
15c989d4d1 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, k8 nb: Fix boot crash: enable k8_northbridges unconditionally on AMD systems
  x86, UV: Fix target_cpus() in x2apic_uv_x.c
  x86: Reduce per cpu warning boot up messages
  x86: Reduce per cpu MCA boot up messages
  x86_64, cpa: Don't work hard in preserving kernel 2M mappings when using 4K already
2010-03-13 14:45:49 -08:00
Borislav Petkov
0e152cd7c1 x86, k8 nb: Fix boot crash: enable k8_northbridges unconditionally on AMD systems
de957628ce changed setting of the
x86_init.iommu.iommu_init function ptr only when GART IOMMU is
found.

One side effect of it is that num_k8_northbridges
is not initialized anymore if not explicitly
called. This resulted in uninitialized pointers in
<arch/x86/kernel/cpu/intel_cacheinfo.c:amd_calc_l3_indices()>,
for example, which uses the num_k8_northbridges thing through
node_to_k8_nb_misc().

Fix that through an initcall that runs right after the PCI
subsystem and does all the scanning. Then, remove initialization
in gart_iommu_init() which is a rootfs_initcall and we're
running before that.

What is more, since num_k8_northbridges is being used in other
places beside GART IOMMU, include it whenever we add AMD CPU
support. The previous dependency chain in kconfig contained

K8_NB depends on AGP_AMD64|GART_IOMMU

which was clearly incorrect. The more natural way in terms of
hardware dependency should be

AGP_AMD64|GART_IOMMU depends on K8_NB depends on CPU_SUP_AMD &&
PCI. Make it so Number One!

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Joerg Roedel <joerg.roedel@amd.com>
LKML-Reference: <20100312144303.GA29262@aftab>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Joerg Roedel <joerg.roedel@amd.com>
2010-03-13 08:36:16 +01:00
Jiri Kosina
318ae2edc3 Merge branch 'for-next' into for-linus
Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c
2010-03-08 16:55:37 +01:00
Linus Torvalds
03a2c4d76c Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (151 commits)
  vga_switcheroo: disable default y by new rules.
  drm/nouveau: fix *staging* driver build with switcheroo off.
  drm/radeon: fix typo in Makefile
  vga_switcheroo: fix build on platforms with no ACPI
  drm/radeon: Fix printf type warning in 64bit system.
  drm/radeon/kms: bump the KMS version number for square tiling support.
  vga_switcheroo: initial implementation (v15)
  drm/radeon/kms: do not disable audio engine twice
  Revert "drm/radeon/kms: disable HDMI audio for now on rv710/rv730"
  drm/radeon/kms: do not preset audio stuff and start timer when not using audio
  drm/radeon: r100/r200 ums: block ability for userspace app to trash 0 page and beyond
  drm/ttm: fix function prototype to match implementation
  drm/radeon: use ALIGN instead of open coding it
  drm/radeon/kms: initialize set_surface_reg reg for rs600 asic
  drm/i915: Use a dmi quirk to skip a broken SDVO TV output.
  drm/i915: enable/disable LVDS port at DPMS time
  drm/i915: check for multiple write domains in pin_and_relocate
  drm/i915: clean-up i915_gem_flush_gpu_write_domain
  drm/i915: reuse i915_gpu_idle helper
  drm/i915: ensure lru ordering of fence_list
  ...

Fixed trivial conflicts in drivers/gpu/vga/Kconfig
2010-03-04 07:49:37 -08:00
Linus Torvalds
58f02db466 Merge branch 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, cacheinfo: Enable L3 CID only on AMD
  x86, cacheinfo: Remove NUMA dependency, fix for AMD Fam10h rev D1
  x86, cpu: Print AMD virtualization features in /proc/cpuinfo
  x86, cacheinfo: Calculate L3 indices
  x86, cacheinfo: Add cache index disable sysfs attrs only to L3 caches
  x86, cacheinfo: Fix disabling of L3 cache indices
  intel-agp: Switch to wbinvd_on_all_cpus
  x86, lib: Add wbinvd smp helpers
2010-02-28 10:37:06 -08:00
Zhenyu Wang
1f7a6e372e drm/i915: Add dependency on the intel agp module
See http://bugzilla.kernel.org/show_bug.cgi?id=15021

Make sure that the appropriate AGP module is loaded and probed before
trying to set up the DRM.  The DRM already depends on the AGP core,
but in this case we know the specific AGP driver we need too, and can
help users avoid the trap of loading the AGP driver after the DRM
driver.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:20 -08:00
Eric Anholt
954bce507a agp/intel: Add a new Sandybridge HB/IG PCI ID combo.
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:19 -08:00
Zhenyu Wang
14bc490bbd drm/i915, agp/intel: Fix stolen memory size on Sandybridge
New memory control config reg at 0x50 should be used for stolen
memory size detection on Sandybridge.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:19 -08:00
Eric Anholt
e3deb204c6 agp/intel: Use a non-reserved value for the cache field of the PTEs.
I don't know if this is what we'll want to be using long term, we'll see.

Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:18 -08:00
Eric Anholt
1089e30095 agp/intel: Add support for Sandybridge.
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:17 -08:00
Zhenyu Wang
af86d4b0f0 agp/intel: official names for Pineview and Ironlake
Print official names for Pineview and Ironlake, which is Intel
GMA3150 and Intel HD graphics.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-22 11:54:40 -05:00
Daniel Mack
3ad2f3fbb9 tree-wide: Assorted spelling fixes
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-09 11:13:56 +01:00
FUJITA Tomonori
06df6dafb5 x86/agp: Fix amd64-agp module initialization regression
This fixes the regression introduced by commit
42590a7501 ("x86/agp: Fix
agp_amd64_init and agp_amd64_cleanup").

The commit 61684ceaad fixed the
above regression but it's not enough. When amd64-agp is built as
a module, AGP isn't initialized, iommu is initialized, all the
aperture is owned by the iommu.

Reported-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Marin Mitov <mitov@issp.bas.bg>
LKML-Reference: <20100204090802S.fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-04 07:27:26 +01:00
FUJITA Tomonori
61684ceaad x86/agp: Fix agp_amd64_init regression
This fixes the regression introduced by commit
42590a7501 ("x86/agp: Fix
agp_amd64_init and agp_amd64_cleanup").

The above commit changes agp_amd64_init() not to do anything if
gart_iommu_aperture is not zero.

If GART iommu calls agp_amd64_init(), we need to skip
agp_amd64_init() when it's called later via module_init.

The problem is that gart_iommu_init() calls agp_amd64_init()
with not zero gart_iommu_aperture so agp_amd64_init() is never
initialized.

When gart_iommu_init() calls agp_amd64_init(), agp should be
always initialized.

Reported-by: Marin Mitov <mitov@issp.bas.bg>
Reported-by: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Marin Mitov <mitov@issp.bas.bg>
Tested-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: davej@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20100125141006O.fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-31 07:52:26 +01:00
Borislav Petkov
48a719c238 intel-agp: Switch to wbinvd_on_all_cpus
Simplify if-statement while at it.

[ hpa: we need to #include <asm/smp.h> ]

Cc: Dave Jones <davej@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <1264172467-25155-3-git-send-email-bp@amd64.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-22 16:06:30 -08:00
Linus Torvalds
330a518a1a Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, uv: Ensure hub revision set for all ACPI modes.
  x86, uv: Add function retrieving node controller revision number
  x86: xen: 64-bit kernel RPL should be 0
  x86: kernel_thread() -- initialize SS to a known state
  x86/agp: Fix agp_amd64_init and agp_amd64_cleanup
  x86: SGI UV: Fix mapping of MMIO registers
  x86: mce.h: Fix warning in header checks
2010-01-16 12:31:42 -08:00
Linus Torvalds
33f724eb9e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: enable 36bit physical address for hardware status page
  drm/i915: fix eDP pipe mask
  drm/i915: fix pixel color depth setting on eDP
  drm/i915: parse eDP panel color depth from VBT block
  drm/i915: disable LVDS downclock by default
  drm/i915: Fix the incorrect cursor A bit definition in DSPFW2 register
  drm/i915: Remove chatty execbuf failure message.
  drm/i915: remove loop in Ironlake interrupt handler
  drm/i915: Don't wait interruptible for possible plane buffer flush
  drm/i915: try another possible DDC bus for the SDVO device with multiple outputs
  drm/i915: Read the response after issuing DDC bus switch command
  drm/i915: Don't use the child device parsed from VBT to setup HDMI/DP
  drm/i915: Fix resume regression on MSI Wind U100 w/o KMS
  drm/i915: Fix Ironlake M/N/P ranges to match the spec
  drm/i915: Use find_pll function to calculate DPLL setting for LVDS downclock
  drm/i915: Add HP nx9020/SamsungSX20S to ACPI LID quirk list
  drm/i915: disable TV hotplug status check

Trivial conflicts in drivers/gpu/drm/i915/i915_drv.c due to i915
non-modeset suspend fix with different comment.
2010-01-16 10:44:38 -08:00
Zhenyu Wang
9b974cc171 drm/i915: enable 36bit physical address for hardware status page
This enables possible 36bit address mask on 965G that use physical
address for hw status page.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-15 14:50:14 -08:00
FUJITA Tomonori
42590a7501 x86/agp: Fix agp_amd64_init and agp_amd64_cleanup
This fixes the regression introduced by the commit
f405d2c023.

The above commit fixes the following issue:

  http://marc.info/?l=linux-kernel&m=126192729110083&w=2

However, it doesn't work properly when you remove and insert the
agp_amd64 module again.

agp_amd64_init() and agp_amd64_cleanup should be called only
when gart_iommu is not called earlier (that is, the GART IOMMU
is not enabled). We need to use 'gart_iommu_aperture' to see if
GART IOMMU is enabled or not.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: mitov@issp.bas.bg
Cc: davej@redhat.com
LKML-Reference: <20100104161603L.fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-13 11:15:37 +01:00
Linus Torvalds
00fdb75b19 Merge branch 'agp-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6
* 'agp-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
  agp/hp: fail gracefully if we don't find an IOC
  agp/hp: fixup hp agp after ACPI changes
  agp: correct missing cleanup on error in agp_add_bridge
2010-01-11 09:47:52 -08:00
Bjorn Helgaas
3d4a7882b1 agp/hp: fail gracefully if we don't find an IOC
Bail out if we don't find an enclosing IOC.  Previously, if we didn't
find one, we tried to set things up using garbage for the SBA/IOC register
address, which causes a crash.

This crash only happens if firmware supplies a defective ACPI namespace, so
it doesn't fix any problems in the field.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-11 15:09:02 +10:00
Bjorn Helgaas
67fe63b071 agp/hp: fixup hp agp after ACPI changes
Commit 15b8dd53f5 changed the string in info->hardware_id from a static
array to a pointer and added a length field.  But instead of changing
"sizeof(array)" to "length", we changed it to "sizeof(length)" (== 4),
which corrupts the string we're trying to null-terminate.

We no longer even need to null-terminate the string, but we *do* need to
check whether we found a HID.  If there's no HID, we used to have an empty
array, but now we have a null pointer.

The combination of these defects causes this oops:

  Unable to handle kernel NULL pointer dereference (address 0000000000000003)
  modprobe[895]: Oops 8804682956800 [1]
  ip is at zx1_gart_probe+0xd0/0xcc0 [hp_agp]

  http://marc.info/?l=linux-ia64&m=126264484923647&w=2

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reported-by: Émeric Maschino <emeric.maschino@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-11 15:09:02 +10:00
Kevin Winchester
3f50b0222e agp: correct missing cleanup on error in agp_add_bridge
While investigating a kmemleak detected leak, I encountered the
agp_add_bridge function.  It appears to be responsible for freeing
the agp_bridge_data in the case of a failure, but it is only doing
so for some errors.

Fix it to always free the bridge data if a failure condition is
encountered.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-11 15:09:01 +10:00
FUJITA Tomonori
f405d2c023 x86/agp: Fix agp_amd64_init() initialization with CONFIG_GART_IOMMU enabled
with CONFIG_GART_IOMMU enabled drivers/char/agp/amd64-agp.c has:

 #ifndef CONFIG_GART_IOMMU
 module_init(agp_amd64_init);
 module_exit(agp_amd64_cleanup);
 #endif

agp_amd64_init() was called via gart_iommu_init with
CONFIG_GART_IOMMU=y agp_amd64_init() was called via module_init
with CONFIG_GART_IOMMU=n

The commit 75f1cdf1dd changes the
x86 dma initialization routine: gart_iommu_init() is called only
when GART IOMMU is detected. So when GART IOMMU isn't detected,
agp_amd64_init isn't called.

Marin Mitov reported this issue:

 http://marc.info/?l=linux-kernel&m=126192729110083&w=2

With this patch, agp_amd64_init() is always called via
module_init (the above ifndef is removed). If agp_amd64_init()
is called via gart_iommu_init() earlier, agp_amd64_init()
finishes without doing anything (when it is called via
module_init).

Reported-by: Marin Mitov <mitov@issp.bas.bg>
Tested-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: davej@redhat.com
LKML-Reference: <20091228181118C.fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-30 11:52:04 +01:00
Linus Torvalds
09cea96caa Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (151 commits)
  powerpc: Fix usage of 64-bit instruction in 32-bit altivec code
  MAINTAINERS: Add PowerPC patterns
  powerpc/pseries: Track previous CPPR values to correctly EOI interrupts
  powerpc/pseries: Correct pseries/dlpar.c build break without CONFIG_SMP
  powerpc: Make "intspec" pointers in irq_host->xlate() const
  powerpc/8xx: DTLB Miss cleanup
  powerpc/8xx: Remove DIRTY pte handling in DTLB Error.
  powerpc/8xx: Start using dcbX instructions in various copy routines
  powerpc/8xx: Restore _PAGE_WRITETHRU
  powerpc/8xx: Add missing Guarded setting in DTLB Error.
  powerpc/8xx: Fixup DAR from buggy dcbX instructions.
  powerpc/8xx: Tag DAR with 0x00f0 to catch buggy instructions.
  powerpc/8xx: Update TLB asm so it behaves as linux mm expects.
  powerpc/8xx: Invalidate non present TLBs
  powerpc/pseries: Serialize cpu hotplug operations during deactivate Vs deallocate
  pseries/pseries: Add code to online/offline CPUs of a DLPAR node
  powerpc: stop_this_cpu: remove the cpu from the online map.
  powerpc/pseries: Add kernel based CPU DLPAR handling
  sysfs/cpu: Add probe/release files
  powerpc/pseries: Kernel DLPAR Infrastructure
  ...
2009-12-12 14:27:24 -08:00
Linus Torvalds
3ef884b4c0 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (189 commits)
  drm/radeon/kms: fix warning about cur_placement being uninitialised.
  drm/ttm: Print debug information on memory manager when eviction fails
  drm: Add memory manager debug function
  drm/radeon/kms: restore surface registers on resume.
  drm/radeon/kms/r600/r700: fallback gracefully on ucode failure
  drm/ttm: Initialize eviction placement in case the driver callback doesn't
  drm/radeon/kms: cleanup structure and module if initialization fails
  drm/radeon/kms: actualy set the eviction placements we choose
  drm/radeon/kms: Fix NULL ptr dereference
  drm/radeon/kms/avivo: add support for new pll selection algo
  drm/radeon/kms/avivo: fix some bugs in the display bandwidth setup
  drm/radeon/kms: fix return value from fence function.
  drm/radeon: Remove tests for -ERESTART from the TTM code.
  drm/ttm: Have the TTM code return -ERESTARTSYS instead of -ERESTART.
  drm/radeon/kms: Convert radeon to new TTM validation API (V2)
  drm/ttm: Rework validation & memory space allocation (V3)
  drm: Add search/get functions to get a block in a specific range
  drm/radeon/kms: fix avivo tiling regression since radeon object rework
  drm/i915: Remove a debugging printk from hangcheck
  drm/radeon/kms: make sure i2c id matches
  ...
2009-12-10 21:56:47 -08:00