Commit Graph

33 Commits

Author SHA1 Message Date
Linus Torvalds
2031d0f586 Merge Christoph's freeze cleanup patch 2005-06-25 17:16:53 -07:00
Christoph Lameter
3e1d1d28d9 [PATCH] Cleanup patch for process freezing
1. Establish a simple API for process freezing defined in linux/include/sched.h:

   frozen(process)		Check for frozen process
   freezing(process)		Check if a process is being frozen
   freeze(process)		Tell a process to freeze (go to refrigerator)
   thaw_process(process)	Restart process
   frozen_process(process)	Process is frozen now

2. Remove all references to PF_FREEZE and PF_FROZEN from all
   kernel sources except sched.h

3. Fix numerous locations where try_to_freeze is manually done by a driver

4. Remove the argument that is no longer necessary from two function calls.

5. Some whitespace cleanup

6. Clear potential race in refrigerator (provides an open window of PF_FREEZE
   cleared before setting PF_FROZEN, recalc_sigpending does not check
   PF_FROZEN).

This patch does not address the problem of freeze_processes() violating the rule
that a task may only modify its own flags by setting PF_FREEZE. This is not clean
in an SMP environment. freeze(process) is therefore not SMP safe!

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 17:10:13 -07:00
Dinakar Guniguntala
1a20ff27ef [PATCH] Dynamic sched domains: sched changes
The following patches add dynamic sched domains functionality that was
extensively discussed on lkml and lse-tech.  I would like to see this added to
-mm

o The main advantage with this feature is that it ensures that the scheduler
  load balacing code only balances against the cpus that are in the sched
  domain as defined by an exclusive cpuset and not all of the cpus in the
  system. This removes any overhead due to load balancing code trying to
  pull tasks outside of the cpu exclusive cpuset only to be prevented by
  the tasks' cpus_allowed mask.
o cpu exclusive cpusets are useful for servers running orthogonal
  workloads such as RT applications requiring low latency and HPC
  applications that are throughput sensitive

o It provides a new API partition_sched_domains in sched.c
  that makes dynamic sched domains possible.
o cpu_exclusive cpusets sets are now associated with a sched domain.
  Which means that the users can dynamically modify the sched domains
  through the cpuset file system interface
o ia64 sched domain code has been updated to support this feature as well
o Currently, this does not support hotplug. (However some of my tests
  indicate hotplug+preempt is currently broken)
o I have tested it extensively on x86.
o This should have very minimal impact on performance as none of
  the fast paths are affected

Signed-off-by: Dinakar Guniguntala <dino@in.ibm.com>
Acked-by: Paul Jackson <pj@sgi.com>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Matthew Dobson <colpatch@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:45 -07:00
Olivier Croquette
37e4ab3f0c [PATCH] Changing RT priority without CAP_SYS_NICE
Presently, a process without the capability CAP_SYS_NICE can not change
its own policy, which is OK.

But it can also not decrease its RT priority (if scheduled with policy
SCHED_RR or SCHED_FIFO), which is what this patch changes.

The rationale is the same as for the nice value: a process should be
able to require less priority for itself. Increasing the priority is
still not allowed.

This is for example useful if you give a multithreaded user process a RT
priority, and the process would like to organize its internal threads
using priorities also. Then you can give the process the highest
priority needed N, and the process starts its threads with lower
priorities: N-1, N-2...

The POSIX norm says that the permissions are implementation specific, so
I think we can do that.

In a sense, it makes the permissions consistent whatever the policy is:
with this patch, process scheduled by SCHED_FIFO, SCHED_RR and
SCHED_OTHER can all decrease their priority.

From: Ingo Molnar <mingo@elte.hu>

cleaned up and merged to -mm.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:44 -07:00
Chen Shang
a3464a102a [PATCH] sched: micro-optimize task requeueing in schedule()
micro-optimize task requeueing in schedule() & clean up recalc_task_prio().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:44 -07:00
Nick Piggin
77391d7168 [PATCH] sched: relax pinned balancing
The maximum rebalance interval allowed by the multiprocessor balancing
backoff is often not large enough to handle corner cases where there are
lots of tasks pinned on a CPU.  Suresh reported:

	I see system livelock's if for example I have 7000 processes
	pinned onto one cpu (this is on the fastest 8-way system I
	have access to).

After this patch, the machine is reported to go well above this number.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:44 -07:00
Nick Piggin
476d139c21 [PATCH] sched: consolidate sbe sbf
Consolidate balance-on-exec with balance-on-fork.  This is made easy by the
sched-domains RCU patches.

As well as the general goodness of code reduction, this allows the runqueues
to be unlocked during balance-on-fork.

schedstats is a problem.  Maybe just have balance-on-event instead of
distinguishing fork and exec?

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:44 -07:00
Nick Piggin
674311d5b4 [PATCH] sched: RCU domains
One of the problems with the multilevel balance-on-fork/exec is that it needs
to jump through hoops to satisfy sched-domain's locking semantics (that is,
you may traverse your own domain when not preemptable, and you may traverse
others' domains when holding their runqueue lock).

balance-on-exec had to potentially migrate between more than one CPU before
finding a final CPU to migrate to, and balance-on-fork needed to potentially
take multiple runqueue locks.

So bite the bullet and make sched-domains go completely RCU.  This actually
simplifies the code quite a bit.

From: Ingo Molnar <mingo@elte.hu>

schedstats RCU fix, and a nice comment on for_each_domain, from Ingo.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:44 -07:00
Nick Piggin
3dbd534207 [PATCH] sched: multilevel sbe sbf
The fundamental problem that Suresh has with balance on exec and fork is that
it only tries to balance the top level domain with the flag set.

This was worked around by removing degenerate domains, but is still a problem
if people want to start using more complex sched-domains, especially
multilevel NUMA that ia64 is already using.

This patch makes balance on fork and exec try balancing over not just the top
most domain with the flag set, but all the way down the domain tree.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:43 -07:00
Suresh Siddha
245af2c787 [PATCH] sched: remove degenerate domains
Remove degenerate scheduler domains during the sched-domain init.

For example on x86_64, we always have NUMA configured in.  On Intel EM64T
systems, top most sched domain will be of NUMA and with only one sched_group
in it.

With fork/exec balances(recent Nick's fixes in -mm tree), we always endup
taking wrong decisions because of this topmost domain (as it contains only one
group and find_idlest_group always returns NULL).  We will endup loading HT
package completely first, letting active load balance kickin and correct it.

In general, this patch also makes sense with out recent Nick's fixes in -mm.

From: Nick Piggin <nickpiggin@yahoo.com.au>

Modified to account for more than just sched_groups when scanning for
degenerate domains by Nick Piggin.  And allow a runqueue's sd to go NULL
rather than keep a single degenerate domain around (this happens when you run
with maxcpus=1).

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:43 -07:00
Nick Piggin
41c7ce9ad9 [PATCH] sched: null domains
Fix the last 2 places that directly access a runqueue's sched-domain and
assume it cannot be NULL.

That allows the use of NULL for domain, instead of a dummy domain, to signify
no balancing is to happen.  No functional changes.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:43 -07:00
Nick Piggin
4866cde064 [PATCH] sched: cleanup context switch locking
Instead of requiring architecture code to interact with the scheduler's
locking implementation, provide a couple of defines that can be used by the
architecture to request runqueue unlocked context switches, and ask for
interrupts to be enabled over the context switch.

Also replaces the "switch_lock" used by these architectures with an oncpu
flag (note, not a potentially slow bitflag).  This eliminates one bus
locked memory operation when context switching, and simplifies the
task_running function.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:43 -07:00
Ingo Molnar
48c08d3f8f [PATCH] sched: uninline task_timeslice
"Chen, Kenneth W" <kenneth.w.chen@intel.com>

uninline task_timeslice() - reduces code footprint noticeably, and it's
slowpath code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:43 -07:00
Nick Piggin
68767a0ae4 [PATCH] sched: schedstats update for balance on fork
Add SCHEDSTAT statistics for sched-balance-fork.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:42 -07:00
Nick Piggin
147cbb4bbe [PATCH] sched: balance on fork
Reimplement the balance on exec balancing to be sched-domains aware.  Use this
to also do balance on fork balancing.  Make x86_64 do balance on fork over the
NUMA domain.

The problem that the non sched domains aware blancing became apparent on dual
core, multi socket opterons.  What we want is for the new tasks to be sent to
a different socket, but more often than not, we would first load up our
sibling core, or fill two cores of a single remote socket before selecting a
new one.

This gives large improvements to STREAM on such systems.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:42 -07:00
Nick Piggin
cafb20c1f9 [PATCH] sched: no aggressive idle balancing
Remove the very aggressive idle stuff that has recently gone into 2.6 - it is
going against the direction we are trying to go.  Hopefully we can regain
performance through other methods.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:42 -07:00
Nick Piggin
a3f21bce1f [PATCH] sched: tweak affine wakeups
Do less affine wakeups.  We're trying to reduce dbt2-pgsql idle time
regressions here...  make sure we don't don't move tasks the wrong way in an
imbalance condition.  Also, remove the cache coldness requirement from the
calculation - this seems to induce sharp cutoff points where behaviour will
suddenly change on some workloads if the load creeps slightly over or under
some point.  It is good for periodic balancing because in that case have
otherwise have no other context to determine what task to move.

But also make a minor tweak to "wake balancing" - the imbalance tolerance is
now set at half the domain's imbalance, so we get the opportunity to do wake
balancing before the more random periodic rebalancing gets preformed.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:41 -07:00
Nick Piggin
7897986bad [PATCH] sched: balance timers
Do CPU load averaging over a number of different intervals.  Allow each
interval to be chosen by sending a parameter to source_load and target_load.
0 is instantaneous, idx > 0 returns a decaying average with the most recent
sample weighted at 2^(idx-1).  To a maximum of 3 (could be easily increased).

So generally a higher number will result in more conservative balancing.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:41 -07:00
Nick Piggin
99b61ccf0b [PATCH] sched: less aggressive idle balancing
Remove the special casing for idle CPU balancing.  Things like this are
hurting for example on SMT, where are single sibling being idle doesn't really
warrant a really aggressive pull over the NUMA domain, for example.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:41 -07:00
Nick Piggin
db935dbd43 [PATCH] sched: add debugging
These conditions should now be impossible, and we need to fix them if they
happen.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:41 -07:00
Nick Piggin
3950745131 [PATCH] sched: fix SMT scheduling problems
SMT balancing has a couple of problems.  Firstly, active_load_balance is too
complex - basically it should be a dumb helper for when the periodic balancer
has determined there is an imbalance, but gets stuck because the task is
running.

So rip out all its "smarts", and just make it move one task to the target CPU.

Second, the busy CPU's sched-domain tree was being used for active balancing.
This means that it may not see that nr_balance_failed has reached a critical
level.  So use the target CPU's sched-domain tree for this.  We can do this
because we hold its runqueue lock.

Lastly, reset nr_balance_failed to a point where we allow cache hot migration.
This will help ensure active load balancing is successful.

Thanks to Suresh Siddha for pointing out these issues.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:41 -07:00
Nick Piggin
16cfb1c04c [PATCH] sched: reduce active load balancing
Fix up active load balancing a bit so it doesn't get called when it shouldn't.
Reset the nr_balance_failed counter at more points where we have found
conditions to be balanced.  This reduces too aggressive active balancing seen
on some workloads.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:40 -07:00
Nick Piggin
8102679447 [PATCH] sched: improve load balancing pinned tasks
John Hawkes explained the problem best:

	A large number of processes that are pinned to a single CPU results
	in every other CPU's load_balance() seeing this overloaded CPU as
	"busiest", yet move_tasks() never finds a task to pull-migrate.  This
	condition occurs during module unload, but can also occur as a
	denial-of-service using sys_sched_setaffinity().  Several hundred
	CPUs performing this fruitless load_balance() will livelock on the
	busiest CPU's runqueue lock.  A smaller number of CPUs will livelock
	if the pinned task count gets high.

Expanding slightly on John's patch, this one attempts to work out whether the
balancing failure has been due to too many tasks pinned on the runqueue.  This
allows it to be basically invisible to the regular blancing paths (ie.  when
there are no pinned tasks).  We can use this extra knowledge to shut down the
balancing faster, and ensure the migration threads don't start running which
is another problem observed in the wild.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:40 -07:00
Nick Piggin
e0f364f406 [PATCH] sched: cleanup wake_idle
New sched-domains code means we don't get spans with offline CPUs in
them.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:40 -07:00
Benjamin LaHaise
c43dc2fd88 [PATCH] aio: make wait_queue ->task ->private
In the upcoming aio_down patch, it is useful to store a private data
pointer in the kiocb's wait_queue.  Since we provide our own wake up
function and do not require the task_struct pointer, it makes sense to
convert the task pointer into a generic private pointer.

Signed-off-by: Benjamin LaHaise <benjamin.c.lahaise@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:34 -07:00
Jesper Juhl
be5b4fbd01 [PATCH] preempt_count is int - remove cast and don't assign to unsigned type
In kernel/sched.c the return value from preempt_count() is cast to an int.
That made sense when preempt_count was defined as different types on is not
needed and should go away.  The patch removes the cast.

In kernel/timer.c the return value from preempt_count() is assigned to a
variable of type u32 and then that unsigned value is later compared to
preempt_count().  Since preempt_count() returns an int, an int is what
should be used to store its return value.  Storing the result in an
unsigned 32bit integer made a tiny bit of sense back when preempt_count was
different types on different archs, but no more - let's not play signed vs
unsigned comparison games when we don't have to.  The patch modifies the
code to use an int to hold the value.  While I was around that bit of code
I also made two changes to a nearby (related) printk() - I modified it to
specify the loglevel explicitly and also broke the line into a few pieces
to avoid it being longer than 80 chars and clarified the text a bit.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:19 -07:00
Ingo Molnar
39c715b717 [PATCH] smp_processor_id() cleanup
This patch implements a number of smp_processor_id() cleanup ideas that
Arjan van de Ven and I came up with.

The previous __smp_processor_id/_smp_processor_id/smp_processor_id API
spaghetti was hard to follow both on the implementational and on the
usage side.

Some of the complexity arose from picking wrong names, some of the
complexity comes from the fact that not all architectures defined
__smp_processor_id.

In the new code, there are two externally visible symbols:

 - smp_processor_id(): debug variant.

 - raw_smp_processor_id(): nondebug variant. Replaces all existing
   uses of _smp_processor_id() and __smp_processor_id(). Defined
   by every SMP architecture in include/asm-*/smp.h.

There is one new internal symbol, dependent on DEBUG_PREEMPT:

 - debug_smp_processor_id(): internal debug variant, mapped to
                             smp_processor_id().

Also, i moved debug_smp_processor_id() from lib/kernel_lock.c into a new
lib/smp_processor_id.c file.  All related comments got updated and/or
clarified.

I have build/boot tested the following 8 .config combinations on x86:

 {SMP,UP} x {PREEMPT,!PREEMPT} x {DEBUG_PREEMPT,!DEBUG_PREEMPT}

I have also build/boot tested x64 on UP/PREEMPT/DEBUG_PREEMPT.  (Other
architectures are untested, but should work just fine.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:13 -07:00
Jan Kara
6df3cecbb9 [PATCH] cond_resched_lock() fix
On one path, cond_resched_lock() fails to return true if it dropped the lock.
We think this might be causing the crashes in JBD's log_do_checkpoint().

Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-13 20:58:58 -07:00
Paul Jackson
b39c4fab25 [PATCH] cpusets+hotplug+preepmt broken
This patch removes the entwining of cpusets and hotplug code in the "No
more Mr.  Nice Guy" case of sched.c move_task_off_dead_cpu().

Since the hotplug code is holding a spinlock at this point, we cannot take
the cpuset semaphore, cpuset_sem, as would seem to be required either to
update the tasks cpuset, or to scan up the nested cpuset chain, looking for
the nearest cpuset ancestor that still has some CPUs that are online.  So
we just punt and blast the tasks cpus_allowed with all bits allowed.

This reverts these lines of code to what they were before the cpuset patch.
 And it updates the cpuset Doc file, to match.

The one known alternative to this that seems to work came from Dinakar
Guniguntala, and required the hotplug code to take the cpuset_sem semaphore
much earlier in its processing.  So far as we know, the increased locking
entanglement between cpusets and hot plug of this alternative approach is
not worth doing in this case.

Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Dinakar Guniguntala <dino@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-20 15:48:19 -07:00
Martin Waitz
67be2dd1ba [PATCH] DocBook: fix some descriptions
Some KernelDoc descriptions are updated to match the current code.
No code changes.

Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:26 -07:00
Matt Mackall
e43379f10b [PATCH] nice and rt-prio rlimits
Add a pair of rlimits for allowing non-root tasks to raise nice and rt
priorities. Defaults to traditional behavior. Originally written by
Chris Wright.

The patch implements a simple rlimit ceiling for the RT (and nice) priorities
a task can set.  The rlimit defaults to 0, meaning no change in behavior by
default.  A value of 50 means RT priority levels 1-50 are allowed.  A value of
100 means all 99 privilege levels from 1 to 99 are allowed.  CAP_SYS_NICE is
blanket permission.

(akpm: see http://www.uwsg.iu.edu/hypermail/linux/kernel/0503.1/1921.html for
tips on integrating this with PAM).

Signed-off-by: Matt Mackall <mpm@selenic.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:00 -07:00
Ingo Molnar
238628edb6 [PATCH] sched: fix signed comparisons of long long
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-18 10:58:36 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00