Commit Graph

209 Commits

Author SHA1 Message Date
Paul Mundt
32351a28a7 sh: Add SH7785 Highlander board support (R7785RP).
This adds preliminary support for the SH7785-based Highlander board.
Some of the Highlander support code is reordered so that most of it
can be reused directly.

This also plugs in missing SH7785 checks in the places that need it,
as this is the first board to support the CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:53 +00:00
Paul Mundt
be782df54c sh: NR_IRQS consolidation.
Each board sets the total number of IRQs that it's interested in via
the machvec. Previously we cared about the off vs on-chip IRQ range,
but any code relying on that is long dead. Set NR_IRQS to something
sensible given the vector range, and allow boards to cap it if they
really care.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:53 +00:00
Paul Mundt
fa69151173 sh: generic BUG() support.
Wire up GENERIC_BUG for SH. This moves off of the special bug
frame and on to the generic struct bug_entry. Roughly the same
semantics are retained, and we can kill off some of the verbose
BUG() reporting code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:53 +00:00
Paul Mundt
45ed285b54 sh: speculative execution support for SH7780.
SH7780 has a speculative execution mode where it can speculatively
perform an instruction fetch for subroutine returns, this allows it
to be enabled. There are some various pitfalls associated with this
mode, so it's left as depending on CONFIG_EXPERIMENTAL and not
enabled by default.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:51 +00:00
Paul Mundt
fc31b80957 sh: Rip out broken kgdb thread support.
The kgdb thread support is woefully out of date (it predates
the pidhash), and needs a complete rewrite before it's useful
again. Just rip it out entirely.

Updating the unified kgdb stub is a more worthwhile endeavour
for anyone that happens to be interested in this, at present
it's just limping along.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:51 +00:00
Paul Mundt
fa5da2f7bd sh: Bring kgdb back from the dead.
This code has suffered quite a bit of bitrot, do some basic
tidying to get it to a reasonably functional state again.
This gets the basic support and the console working again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:51 +00:00
Jeremy Fitzhardinge
b6e3590f81 [PATCH] x86: Allow percpu variables to be page-aligned
Let's allow page-alignment in general for per-cpu data (wanted by Xen, and
Ingo suggested KVM as well).

Because larger alignments can use more room, we increase the max per-cpu
memory to 64k rather than 32k: it's getting a little tight.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-05-02 19:27:12 +02:00
Paul Mundt
9c5b406b9a sh: Kill bogus GCC4 symbol exports.
__sdivsi3_i4i, __udiv_qrnnd_16, and __udivsi3_i4i don't exist
outside of the ST compiler, so kill them off.

This causes compile failures with other GCC4 compilers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-28 17:24:47 +09:00
Paul Mundt
3afb209a43 sh: Fix bogus regs pointer in do_IRQ().
SH-3 and SH-4 were trampling the register, and SH-2 wasn't even
setting it in the first place. This ended up with some rather
broken behaviour in the sysrq show_regs().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-14 13:03:35 +09:00
Paul Mundt
ffe1b4e9f4 sh: Fix SH-3 cache entry_mask and way_size calculation.
The code for performing the calculation was only in the SH-4 probe
path, move it out to the common path so the other parts get this
right too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-12 16:15:22 +09:00
Paul Mundt
39e688a94b sh: Revert lazy dcache writeback changes.
These ended up causing too many problems on older parts,
revert for now..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-05 19:46:47 +09:00
Paul Mundt
87e29cacb7 sh: Use L1_CACHE_BYTES for .data.cacheline_aligned.
Previously this was using a hardcoded 32, use L1_CACHE_BYTES for
cacheline alignment instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-05 14:13:26 +09:00
Hideo Saito
e6bcf562e5 sh: Fix kernel thread stack corruption with preempt.
When I run a preemptive kernel-2.6.20 for SH7780, a created
kthread(pdflush) can not exit by do_exit() in kernel_thread_helper. I
think that the created kthread should have a room for 'struct pt_regs'
space on the stack top, because __switch_to() will refer to the space as
follows using 'regs = task_pt_regs(prev)' and next condition may be true.

Signed-off-by: Hideo Saito <saito@densan.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-05 14:13:26 +09:00
Ryusuke Sakato
c8bfa1fdc8 sh: Fix sigmask trampling in signal delivery.
There was a missing return in do_signal() that caused the saved
sigmask to be written back after having successfully delivered
the signal.

Signed-off-by: Ryusuke Sakato <sakato@hsdv.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-05 14:13:25 +09:00
Stuart Menefy
9432f96803 sh: Clear UBC when not in use.
This takes care of tearing down the UBC so it's not inadvertently
left configured at the next context switch time. Failure to do
this results in spurious SIGTRAPs in certain debug sequences.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-05 14:13:25 +09:00
Tobias Klauser
c5a69d57eb Storage class should be before const qualifier
The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the
beginning of the declaration specifiers in a declaration is an
obsolescent feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 20:11:19 +01:00
Paul Mundt
9c57548f17 sh: rts7751r2d board updates.
This tidies up some of the rts7751r2d mess and gets it booting
again. Update the defconfig, too.

Signed-off-by: Masayuki Hosokawa <hosokawa@ace-jp.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-15 18:20:52 +09:00
Paul Mundt
db2e1fa3f0 sh: Revert TLB miss fast-path changes that broke PTEA parts.
This ended up causing problems for older parts (particularly ones
using PTEA). Revert this for now, it can be added back in once it's
had some more testing.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-14 14:13:10 +09:00
Paul Mundt
b37814352d sh: Fix syscall numbering breakage.
We accidentally broke the inotify syscalls, fix those up again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:46 +09:00
Paul Mundt
ea9af69481 sh: Local TLB flushing variants for SMP prep.
Rename the existing flush routines to local_ variants for use by
the IPI-backed global flush routines on SMP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Paul Mundt
11c1965687 sh: Fixup cpu_data references for the non-boot CPUs.
There are a lot of bogus cpu_data-> references that only end up working
for the boot CPU, convert these to current_cpu_data to fixup SMP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Paul Mundt
aec5e0e1c1 sh: Use a per-cpu ASID cache.
Previously this was implemented using a global cache, cache
this per-CPU instead and bump up the number of context IDs to
match NR_CPUS.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Manuel Lauss
9f8a5e3a44 sh: SH-DMAC compile fixes
This patch does the following:
- remove the make_ipr_irq stuff from dma-sh.c and replace it
  with a simple channel<->irq mapping table.
- add DMTEx_IRQ constants for sh4 cpus
- fix sh7751 DMAE irq number

The SH7780 uses the same IRQs for DMA as other SH4 types, so
I put the constants on top of the dma.h file.

Other CPU types need to #define their own DMTEx_IRQ contants
in their appropriate header.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Manuel Lauss
6dcda6f1ec sh: add SH7760 IPR IRQ data
Add SH7760 IPR IRQ data; makes 2.6.20-rc bootable again.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Nobuhiro Iwamatsu
86b67ef751 sh: Fix handle_BUG() compile error.
handle_BUG() uses TRAPA_BUG_OPCODE which is only defined for
CONFIG_BUG, make sure it's not built when CONFIG_BUG=n.

Signed-off-by: Nobuhiro Iwamatsu <hemamu@t-base.ne.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Paul Mundt
26b7a78c55 sh: Lazy dcache writeback optimizations.
This converts the lazy dcache handling to the model described in
Documentation/cachetlb.txt and drops the ptep_get_and_clear() hacks
used for the aliasing dcaches on SH-4 and SH7705 in 32kB mode. As a
bonus, this slightly cuts down on the cache flushing frequency.

With that and the PTEA handling out of the way, the update_mmu_cache()
implementations can be consolidated, and we no longer have to worry
about which configuration the cache is in for the SH7705 case.

And finally, explicitly disable the lazy writeback on SMP (SH-4A).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:44 +09:00
Paul Mundt
7a847f8190 sh: More tidying for large base pages.
There were a few more things that needed fixing up, namely THREAD_SIZE
and the TLB miss handler where certain PTRS_PER_PGD == PTRS_PER_PTE
assumptions were being made.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:44 +09:00
Takashi YOSHII
f725b5ee1e sh: shmin updates.
This fixes up shmin (and SH7706/SH7708) IPR support for some of the
recent API changes.

Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:44 +09:00
Jamie Lenehan
703404ea44 sh: allow earlyprintk baud rate to be set via command line
This allows the baud rate for earlyprintk for sh4 without the
standard BIOS to be set via the command line. This uses the same
format as i386 and x86_64, which is:

	earlyprintk=serial,ttySC1,38400

The second parameter (ttySC1 above) is usually the console device
name or the io address of the serial port. I allow that to be
specified but ignore it in order to keep the format the same as
i386/x86_64.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:44 +09:00
Yoshinori Sato
5c67cd05e3 sh: sh7619 / sh7206 IPR initialize update
IPR initialize proceduere update.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:43 +09:00
Yoshinori Sato
4aa362bbdd sh: Update SH-2 to use the debug trap jump table.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:43 +09:00
Paul Mundt
f413d0d9fa sh: Use a jump call table for debug trap handlers.
This rips out most of the needlessly complicated sh_bios and kgdb
trap handling, and forces it all through a common fast dispatch path.
As more debug traps are inserted, it's important to keep them in sync
for all of the parts, not just SH-3/4.

As the SH-2 parts are unable to do traps in the >= 0x40 range, we
restrict the debug traps to the 0x30-0x3f range on all parts, and
also bump the kgdb breakpoint trap down in to this range (from 0xff
to 0x3c) so it's possible to use for nommu.

Optionally, this table can be padded out to catch spurious traps for
SH-3/4, but we don't do that yet..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:43 +09:00
Alon Bar-Lev
53c82622c2 [PATCH] Dynamic kernel command-line: sh
1. Rename saved_command_line into boot_command_line.
2. Set command_line as __initdata.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:39 -08:00
Alexey Dobriyan
b035b6de24 [PATCH] Consolidate default sched_clock()
Use attribute(weak).

Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:28 -08:00
Jean-Paul Saman
67d38229df [PATCH] disable init/initramfs.c: architectures
Update all arch/*/kernel/vmlinux.lds.S to not include space for initramfs
when CONFIG_BLK_DEV_INITRAMFS is not selected.  This saves another 4 kbytes
on most platfoms (some reserve PAGE_SIZE for initramfs).

Signed-off-by: Jean-Paul Saman <jean-paul.saman@nxp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:25 -08:00
Linus Torvalds
2fd592e45b Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-apm
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-apm:
  [APM] SH: Convert to use shared APM emulation.
  [APM] MIPS: Convert to use shared APM emulation.
  [APM] ARM: Convert to use shared APM emulation.
  [APM] Add shared version of APM emulation
2007-02-09 09:44:28 -08:00
Paul Mundt
2affc857ef [PATCH] SH vdso: use install_special_mapping()
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 09:25:47 -08:00
Paul Mundt
0a9b0db192 [APM] SH: Convert to use shared APM emulation.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-09 17:08:58 +00:00
Yoshinori Sato
e9cfc147df sh: Fixup SH-2 BUG() trap handling.
This adds in support for the BUG() trap on SH-2.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 09:11:45 +09:00
Paul Mundt
b641fe016a sh: Use early_param() for earlyprintk parsing.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 09:00:47 +09:00
Paul Mundt
e2dfb912d3 sh: Fix .empty_zero_page alignment for PAGE_SIZE > 4096.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:53:29 +09:00
Paul Mundt
f668f55c39 sh: Fixup .data.page_aligned.
This had a bogus .data.idt reference, fix it up..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:50:36 +09:00
Paul Mundt
05c8690d95 sh: Hook up SH7722 scif ipr interrupts.
Add the SCIF IRQs to the IPR table for SH7722.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:49:06 +09:00
Paul Mundt
1dc417d039 sh: Fixup sh_bios() trap handling.
This was inadvertently broken when the entry.S code split up,
restore the missing branch and get subsequent traps working
under debug again. This manifested itself as a lockup when
attempting to reload the VBR base.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:09 +09:00
Paul Mundt
41504c3972 sh: SH-MobileR SH7722 CPU support.
This adds CPU support for the SH7722.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:09 +09:00
Paul Mundt
37bda1da45 sh: Convert remaining remap_area_pages() users to ioremap_page_range().
A couple of these were missed.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:08 +09:00
Paul Mundt
79890c5124 sh: Fixup kernel_execve() for syscall cleanups.
SH-2 and SH-2A need to use a different syscall base for the trapa
vector than the other parts, so fixup the logic in the kernel_execve()
case.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:08 +09:00
Paul Mundt
b652c23cb0 sh: Fix get_wchan().
Some time ago the schedule frame size changed and we failed to reflect
this in get_wchan() at the time. This first popped up as a problem on
SH7751R where schedule_frame ended up being unaligned and generating
an unaligned trap. This fixes it up again..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:08 +09:00
Paul Mundt
dc34d312c7 sh: BUG() handling through trapa vector.
Previously we haven't been doing anything with verbose BUG() reporting,
and we've been relying on the oops path for handling BUG()'s, which is
rather sub-optimal.

This switches BUG handling to use a fixed trapa vector (#0x3e) where we
construct a small bug frame post trapa instruction to get the context
right. This also makes it trivial to wire up a DIE_BUG for the atomic
die chain, which we couldn't really do before.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:08 +09:00
Yoshinori Sato
11cbb70ea3 sh: Trivial build fixes for SH-2 support.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:07 +09:00