Commit Graph

28 Commits

Author SHA1 Message Date
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Satoshi Oshima
dc49e3445a [PATCH] kprobes: bad manipulation of 2 byte opcode on x86_64
Problem:

If we put a probe onto a callq instruction and the probe is executed,
kernel panic of Bad RIP value occurs.

Root cause:

If resume_execution() found 0xff at first byte of p->ainsn.insn, it must
check the _second_ byte.  But current resume_execution check _first_ byte
again.

I changed it checks second byte of p->ainsn.insn.

Kprobes on i386 don't have this problem, because the implementation is a
little bit different from x86_64.

Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Satoshi Oshima <soshima@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 12:59:21 -07:00
Prasanna S Panchamukhi
3b60211c16 [PATCH] Switch Kprobes inline functions to __kprobes for x86_64
Andrew Morton pointed out that compiler might not inline the functions
marked for inline in kprobes.  There-by allowing the insertion of probes
on these kprobes routines, which might cause recursion.

This patch removes all such inline and adds them to kprobes section
there by disallowing probes on all such routines.  Some of the routines
can even still be inlined, since these routines gets executed after the
kprobes had done necessay setup for reentrancy.

Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19 09:13:53 -07:00
Prasanna S Panchamukhi
c28f896634 [PATCH] kprobes: fix broken fault handling for x86_64
Provide proper kprobes fault handling, if a user-specified pre/post handlers
tries to access user address space, through copy_from_user(), get_user() etc.

The user-specified fault handler gets called only if the fault occurs while
executing user-specified handlers.  In such a case user-specified handler is
allowed to fix it first, later if the user-specifed fault handler does not fix
it, we try to fix it by calling fix_exception().

The user-specified handler will not be called if the fault happens when single
stepping the original instruction, instead we reset the current probe and
allow the system page fault handler to fix it up.

Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:04 -08:00
bibo,mao
2326c77017 [PATCH] kprobe handler: discard user space trap
Currently kprobe handler traps only happen in kernel space, so function
kprobe_exceptions_notify should skip traps which happen in user space.
This patch modifies this, and it is based on 2.6.16-rc4.

Signed-off-by: bibo mao <bibo.mao@intel.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com>
Cc: <hiramatu@sdl.hitachi.co.jp>
Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:04 -08:00
Ingo Molnar
7a7d1cf954 [PATCH] sem2mutex: kprobes
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 07:38:12 -08:00
Keshavamurthy Anil S
eb3a72921c [PATCH] kprobes: fix race in recovery of reentrant probe
There is a window where a probe gets removed right after the probe is hit
on some different cpu.  In this case probe handlers can't find a matching
probe instance related to break address.  In this case we need to read the
original instruction at break address to see if that is not a break/int3
instruction and recover safely.

Previous code had a bug where we were not checking for the above race in
case of reentrant probes and the below patch fixes this race.

Tested on IA64, Powerpc, x86_64.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 18:42:12 -08:00
Ananth N Mavinakayanahalli
0498b63504 [PATCH] kprobes: fix build breakage
The following patch (against 2.6.15-rc5-mm3) fixes a kprobes build break
due to changes introduced in the kprobe locking in 2.6.15-rc5-mm3.  In
addition, the patch reverts back the open-coding of kprobe_mutex.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:40 -08:00
Anil S Keshavamurthy
e597c2984c [PATCH] kprobes: arch_remove_kprobe
Currently arch_remove_kprobes() is only implemented/required for x86_64 and
powerpc.  All other architecture like IA64, i386 and sparc64 implementes a
dummy function which is being called from arch independent kprobes.c file.

This patch removes the dummy functions and replaces it with
#define arch_remove_kprobe(p, s)	do { } while(0)

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:40 -08:00
Keshavamurthy Anil S
f709b12234 [PATCH] kprobes-changed-from-using-spinlock-to-mutex fix
Based on some feedback from Oleg Nesterov, I have made few changes to
previously posted patch.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:40 -08:00
Anil S Keshavamurthy
49a2a1b83b [PATCH] kprobes: changed from using spinlock to mutex
Since Kprobes runtime exception handlers is now lock free as this code path is
now using RCU to walk through the list, there is no need for the
register/unregister{_kprobe} to use spin_{lock/unlock}_isr{save/restore}.  The
serialization during registration/unregistration is now possible using just a
mutex.

In the above process, this patch also fixes a minor memory leak for x86_64 and
powerpc.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:40 -08:00
Keshavamurthy Anil S
bf8d5c52c3 [PATCH] kprobes: increment kprobe missed count for multiprobes
When multiple probes are registered at the same address and if due to some
recursion (probe getting triggered within a probe handler), we skip calling
pre_handlers and just increment nmissed field.

The below patch make sure it walks the list for multiple probes case.
Without the below patch we get incorrect results of nmissed count for
multiple probe case.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 08:57:45 -08:00
Ananth N Mavinakayanahalli
d217d5450f [PATCH] Kprobes: preempt_disable/enable() simplification
Reorganize the preempt_disable/enable calls to eliminate the extra preempt
depth.  Changes based on Paul McKenney's review suggestions for the kprobes
RCU changeset.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:46 -08:00
Ananth N Mavinakayanahalli
991a51d83a [PATCH] Kprobes: Use RCU for (un)register synchronization - arch changes
Changes to the arch kprobes infrastructure to take advantage of the locking
changes introduced by usage of RCU for synchronization.  All handlers are now
run without any locks held, so they have to be re-entrant or provide their own
synchronization.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:46 -08:00
Ananth N Mavinakayanahalli
e7a510f92c [PATCH] Kprobes: Track kprobe on a per_cpu basis - x86_64 changes
x86_64 changes to track kprobe execution on a per-cpu basis.  We now track the
kprobe state machine independently on each cpu using a arch specific kprobe
control block.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:46 -08:00
Ananth N Mavinakayanahalli
66ff2d0691 [PATCH] Kprobes: rearrange preempt_disable/enable() calls
The following set of patches are aimed at improving kprobes scalability.  We
currently serialize kprobe registration, unregistration and handler execution
using a single spinlock - kprobe_lock.

With these changes, kprobe handlers can run without any locks held.  It also
allows for simultaneous kprobe handler executions on different processors as
we now track kprobe execution on a per processor basis.  It is now necessary
that the handlers be re-entrant since handlers can run concurrently on
multiple processors.

All changes have been tested on i386, ia64, ppc64 and x86_64, while sparc64
has been compile tested only.

The patches can be viewed as 3 logical chunks:

patch 1: 	Reorder preempt_(dis/en)able calls
patches 2-7: 	Introduce per_cpu data areas to track kprobe execution
patches 8-9: 	Use RCU to synchronize kprobe (un)registration and handler
		execution.

Thanks to Maneesh Soni, James Keniston and Anil Keshavamurthy for their
review and suggestions. Thanks again to Anil, Hien Nguyen and Kevin Stafford
for testing the patches.

This patch:

Reorder preempt_disable/enable() calls in arch kprobes files in preparation to
introduce locking changes.  No functional changes introduced by this patch.

Signed-off-by: Ananth N Mavinakayahanalli <ananth@in.ibm.com>
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:45 -08:00
Zhang, Yanmin
2dd960d66b [PATCH] utilization of kprobe_mutex is incorrect on x86_64
The up()/down() orders are incorrect in arch/x86_64/kprobes.c file.
kprobe_mutext is used to protect the free kprobe instruction slot list.
arch_prepare_kprobe applies for a slot from the free list, and
arch_remove_kprobe returns a slot to the free list.  The incorrect up()/down()
orders to operate on kprobe_mutex fail to protect the free list.  If 2 threads
try to get/return kprobe instruction slot at the same time, the free slot list
might be broken, or a free slot might be applied by 2 threads.

Signed-off-by: Zhang Yanmin <Yanmin.zhang@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:20 -07:00
Keshavamurthy Anil S
deac66ae45 [PATCH] kprobes: fix bug when probed on task and isr functions
This patch fixes a race condition where in system used to hang or sometime
crash within minutes when kprobes are inserted on ISR routine and a task
routine.

The fix has been stress tested on i386, ia64, pp64 and on x86_64.  To
reproduce the problem insert kprobes on schedule() and do_IRQ() functions
and you should see hang or system crash.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:58:01 -07:00
Jim Keniston
bce0649417 [PATCH] kprobes: fix handling of simultaneous probe hit/unregister
This patch fixes a bug in kprobes's handling of a corner case on i386 and
x86_64.  On an SMP system, if one CPU unregisters a kprobe just after
another CPU hits that probepoint, kprobe_handler() on the latter CPU sees
that the kprobe has been unregistered, and attempts to let the CPU continue
as if the probepoint hadn't been hit.  The bug is that on i386 and x86_64,
we were neglecting to set the IP back to the beginning of the probed
instruction.  This could cause an oops or crash.

This bug doesn't exist on ppc64 and ia64, where a breakpoint instruction
leaves the IP pointing to the beginning of the instruction.  I don't know
about sparc64.  (Dave, could you please advise?)

This fix has been tested on i386 and x86_64 SMP systems.  To reproduce the
problem, set one CPU to work registering and unregistering a kprobe
repeatedly, and another CPU pounding the probepoint in a tight loop.

Acked-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:58:01 -07:00
Prasanna S Panchamukhi
0f2fbdcbb0 [PATCH] kprobes: prevent possible race conditions x86_64 changes
This patch contains the x86_64 architecture specific changes to prevent the
possible race conditions.

Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:59 -07:00
Rusty Lynch
6772926bef [PATCH] kprobes: fix namespace problem and sparc64 build
The following renames arch_init, a kprobes function for performing any
architecture specific initialization, to arch_init_kprobes in order to
cleanup the namespace.

Also, this patch adds arch_init_kprobes to sparc64 to fix the sparc64 kprobes
build from the last return probe patch.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-05 19:19:00 -07:00
Rusty Lynch
ba8af12f43 [PATCH] Return probe redesign: x86_64 specific changes
The following patch contains the x86_64 specific changes for the new
return probe design.  Changes include:
 * Removing the architecture specific functions for querying a return probe
   instance off a stack address
 * Complete rework onf arch_prepare_kretprobe() and trampoline_probe_handler()
 * Removing trampoline_post_handler()
 * Adding arch_init() so that now we handle registering the return probe
   trampoline instead of kernel/kprobes.c doing it

NOTE:
Note that with this new design, the dependency on calculating a pointer to
the task off the stack pointer no longer exist (resolving the problem of
interruption stacks as pointed out in the original feedback to this port.)

Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:23:53 -07:00
Ananth N Mavinakayanahalli
9ec4b1f356 [PATCH] kprobes: fix single-step out of line - take2
Now that PPC64 has no-execute support, here is a second try to fix the
single step out of line during kprobe execution.  Kprobes on x86_64 already
solved this problem by allocating an executable page and using it as the
scratch area for stepping out of line.  Reuse that.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 15:23:52 -07:00
Prasanna S Panchamukhi
aa3d7e3d78 [PATCH] kprobes: Temporary disarming of reentrant probe for x86_64
This patch includes x86_64 architecture specific changes to support temporary
disarming on reentrancy of probes.

Signed-of-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:24 -07:00
Rusty Lynch
7e1048b11c [PATCH] Move kprobe [dis]arming into arch specific code
The architecture independent code of the current kprobes implementation is
arming and disarming kprobes at registration time.  The problem is that the
code is assuming that arming and disarming is a just done by a simple write
of some magic value to an address.  This is problematic for ia64 where our
instructions look more like structures, and we can not insert break points
by just doing something like:

*p->addr = BREAKPOINT_INSTRUCTION;

The following patch to 2.6.12-rc4-mm2 adds two new architecture dependent
functions:

     * void arch_arm_kprobe(struct kprobe *p)
     * void arch_disarm_kprobe(struct kprobe *p)

and then adds the new functions for each of the architectures that already
implement kprobes (spar64/ppc64/i386/x86_64).

I thought arch_[dis]arm_kprobe was the most descriptive of what was really
happening, but each of the architectures already had a disarm_kprobe()
function that was really a "disarm and do some other clean-up items as
needed when you stumble across a recursive kprobe." So...  I took the
liberty of changing the code that was calling disarm_kprobe() to call
arch_disarm_kprobe(), and then do the cleanup in the block of code dealing
with the recursive kprobe case.

So far this patch as been tested on i386, x86_64, and ppc64, but still
needs to be tested in sparc64.

Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:21 -07:00
Rusty Lynch
73649dab0f [PATCH] x86_64 specific function return probes
The following patch adds the x86_64 architecture specific implementation
for function return probes.

Function return probes is a mechanism built on top of kprobes that allows
a caller to register a handler to be called when a given function exits.
For example, to instrument the return path of sys_mkdir:

static int sys_mkdir_exit(struct kretprobe_instance *i, struct pt_regs *regs)
{
	printk("sys_mkdir exited\n");
	return 0;
}
static struct kretprobe return_probe = {
	.handler = sys_mkdir_exit,
};

<inside setup function>

return_probe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("sys_mkdir");
if (register_kretprobe(&return_probe)) {
	printk(KERN_DEBUG "Unable to register return probe!\n");
	/* do error path */
}

<inside cleanup function>
unregister_kretprobe(&return_probe);

The way this works is that:

* At system initialization time, kernel/kprobes.c installs a kprobe
  on a function called kretprobe_trampoline() that is implemented in
  the arch/x86_64/kernel/kprobes.c  (More on this later)

* When a return probe is registered using register_kretprobe(),
  kernel/kprobes.c will install a kprobe on the first instruction of the
  targeted function with the pre handler set to arch_prepare_kretprobe()
  which is implemented in arch/x86_64/kernel/kprobes.c.

* arch_prepare_kretprobe() will prepare a kretprobe instance that stores:
  - nodes for hanging this instance in an empty or free list
  - a pointer to the return probe
  - the original return address
  - a pointer to the stack address

  With all this stowed away, arch_prepare_kretprobe() then sets the return
  address for the targeted function to a special trampoline function called
  kretprobe_trampoline() implemented in arch/x86_64/kernel/kprobes.c

* The kprobe completes as normal, with control passing back to the target
  function that executes as normal, and eventually returns to our trampoline
  function.

* Since a kprobe was installed on kretprobe_trampoline() during system
  initialization, control passes back to kprobes via the architecture
  specific function trampoline_probe_handler() which will lookup the
  instance in an hlist maintained by kernel/kprobes.c, and then call
  the handler function.

* When trampoline_probe_handler() is done, the kprobes infrastructure
  single steps the original instruction (in this case just a top), and
  then calls trampoline_post_handler().  trampoline_post_handler() then
  looks up the instance again, puts the instance back on the free list,
  and then makes a long jump back to the original return instruction.

So to recap, to instrument the exit path of a function this implementation
will cause four interruptions:

  - A breakpoint at the very beginning of the function allowing us to
    switch out the return address
  - A single step interruption to execute the original instruction that
    we replaced with the break instruction (normal kprobe flow)
  - A breakpoint in the trampoline function where our instrumented function
    returned to
  - A single step interruption to execute the original instruction that
    we replaced with the break instruction (normal kprobe flow)

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:21 -07:00
Prasanna S Panchamukhi
0b9e2cac8a [PATCH] Kprobes: Incorrect handling of probes on ret/lret instruction
Kprobes could not handle the insertion of a probe on the ret/lret
instruction and used to oops after single stepping since kprobes was
modifying eip/rip incorrectly.  Adjustment of eip/rip is not required after
single stepping in case of ret/lret instruction, because eip/rip points to
the correct location after execution of the ret/lret instruction.  This
patch fixes the above problem.

Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:39 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00