Commit Graph

28 Commits

Author SHA1 Message Date
Clemens Ladisch
4972a177fe [ALSA] oxygen: generalize DAC volume TLV handling
Add a pointer for DAC volume TLV data to the model structure so that the
model driver do not need to manually assign it in their control filter.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:37 +02:00
Clemens Ladisch
e983532e44 [ALSA] oxygen: mute by default
Initialize the playback volume controls as being muted and having
minimal volume.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:37 +02:00
Clemens Ladisch
193e813814 [ALSA] oxygen: generalize handling of DAC volume limits
Add fields for the DAC volume limits to the module structure so that
model drivers do not need to install their own control info handlers.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:36 +02:00
Clemens Ladisch
e97f79994a [ALSA] oxygen: fix line-in recording selection (now for real)
On C-Media cards, the GPIO pin 0 of the CM9780 must be handled exactly
like on Xonar cards, so move the Xonar code to the common mixer code.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:30 +02:00
Clemens Ladisch
db12b8e301 [ALSA] oxygen: move MIDI flag to model struct
Put the flag that enables the MIDI port into the model structure instead
of passing it as a separate parameter to oxygen_pci_probe().

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:28 +02:00
Clemens Ladisch
87eedd2fd4 [ALSA] oxygen: make SPI/2-wire configuration model-specific
Allow the model drivers to specify if the codec communication goes over
SPI or a 2-wire bus.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:28 +02:00
Clemens Ladisch
f009ad9b39 [ALSA] oxygen: change model-specific PCM device configuration
When specifying which PCM devices to use, model drivers now use flags
that also specify the routing between PCM devices and DMA channels
instead of just DMA channel bits.  This simplifies some code that checks
for these flags.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:28 +02:00
Clemens Ladisch
f5b2368ba8 [ALSA] oxygen: move WM8785 symbols to a header file
Move the WM8786 register symbol definitions to their own header file.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:27 +02:00
Clemens Ladisch
902b05c117 [ALSA] oxygen: fix line-in recording selection
The GPIO pin 0 of the CM9780 must be set when muting the line input even
on non-Xonar cards.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-22 14:20:08 -08:00
Clemens Ladisch
2ea85986dd [ALSA] oxygen: revert SPI clock frequency change for AK4396/WM8785
While the AK4396 and WM8785 datasheets say that the SPI clock cycle
length must be at least 200 ns, 320 ns seems not to work reliably with
the controller, so we better use 160 ns.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:23 +01:00
Clemens Ladisch
236c4920ea [ALSA] oxygen: fix AK4396 double rate upper limit
Fix the upper sample rate limit for the double rate mode of the AK4396
to the value from the datasheet.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:16 +01:00
Clemens Ladisch
c626026dd7 [ALSA] add TempoTec HiFier driver
Add a driver for the MediaTek/TempoTec HiFier Fantasia sound card.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:15 +01:00
Clemens Ladisch
976cd62700 [ALSA] oxygen: make the number of analog output configurable
Add a field to struct oxygen_model to allow model drivers for cards with
less than eight output channels.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:14 +01:00
Clemens Ladisch
cd93dc8cca [ALSA] oxygen: remove MIDI for generic cards
None of the reference design models have MIDI, only the X-Meridian
allows to connect a MIDI adapter.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:13 +01:00
Clemens Ladisch
7ef37cd954 [ALSA] oxygen: move model-specific data out of common header
Instead of having model-specific fields in the common struct oxygen, put
them into a private structure that is allocated together with the card
structure.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:08 +01:00
Clemens Ladisch
3b94253bc9 [ALSA] oxygen: reduce SPI clock frequency for AK4396/WM8785
According to the datasheets, the SPI clock cycle must be at least 200 ns
for the AK4396 and the WM8785, so we cannot use the default 160 ns.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:07 +01:00
Clemens Ladisch
71e22a4b77 [ALSA] oxygen: allow more sample rates with WM8785
Allow to record with 32 kHz, 64 kHz, 88.2 kHz and 176.4 kHz with cards
that have a WM8785 ADC.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:07 +01:00
Clemens Ladisch
878ac3ee76 [ALSA] oxygen: add more symbols
Add symbol definitions for the various codecs and GPIO pins.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:07 +01:00
Clemens Ladisch
44fb7aae82 [ALSA] oxygen: remove MIDI autodetection
The MIDI bit in the MISC register is set by default and cannot be used
to detect the presence of a MIDI port.  Instead, add a parameter to the
oxygen_pci_probe() function so that model drivers can specify this.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:06 +01:00
Clemens Ladisch
c2353a0826 [ALSA] oxygen: add register definitions
Add more symbols for registers and register fields.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:04 +01:00
Clemens Ladisch
05855ba3f4 [ALSA] oxygen: make the I2S format configurable
Add proper register bit symbols for the I2S format field, and allow card
models to configure the I2S format to be used for the DACs and ADCs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:03 +01:00
Clemens Ladisch
747c6016ce [ALSA] oxygen: make PCM limits configurable
Add a callback to the model structure to allow modification of the
hardware PCM limits.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:00 +01:00
Clemens Ladisch
ccc80fb467 [ALSA] oxygen: add control filter to model struct
Allow the models to modify mixer controls before they are added to the
card.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:00 +01:00
Clemens Ladisch
e85e09250a [ALSA] oxygen: make all DMA channels configurable
Allow the card models to specify whether each of the hardware DMA
channels is used.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:00 +01:00
Clemens Ladisch
84aa6b7ba7 [ALSA] oxygen: make SPI configuration configurable
Add a field to the model structure so that it is possible to have a card
where the SPI outputs 4 and 5 are used for an EEPROM.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:59 +01:00
Clemens Ladisch
7113e95812 [ALSA] oxygen: fix channel routing
Do not exchange the surround and back jacks except when in 7.1 mode
where the surround jack is not rear but side.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:56 +01:00
Takashi Iwai
9004acc70e [ALSA] Remove sound/driver.h
This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:48 +01:00
Clemens Ladisch
d0ce9946c5 [ALSA] add CMI8788 driver
Add the snd-oxygen driver for the C-Media CMI8788 (Oxygen) chip, used on
the Asound A-8788, AuzenTech X-Meridian, Bgears b-Enspirer,
Club3D Theatron DTS, HT-Omega Claro, Razer Barracuda AC-1,
Sondigo Inferno, and TempoTec HIFIER sound cards.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:44 +01:00