Commit Graph

425 Commits

Author SHA1 Message Date
Michal Simek
6513412135 microblaze: Defconfig update
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:37:42 +02:00
Michal Simek
3274c5707c microblaze: Optimize CACHE_LOOP_LIMITS and CACHE_RANGE_LOOP macros
1. Remove CACHE_ALL_LOOP2 macro because it is identical to CACHE_ALL_LOOP
2. Change BUG_ON to WARN_ON
3. Remove end aligned from CACHE_LOOP_LIMITS.
C implementation do not need aligned end address and ASM code do aligned
in their macros
4. ASM optimized  CACHE_RANGE_LOOP_1/2 macros needs to get aligned end address.
Because end address is compound from start + size, end address is the first address
which is exclude.

Here is the corresponding code which describe it.
+       int align = ~(line_length - 1);
+       end = ((end & align) == end) ? end - line_length : end & align;

a) end is aligned:
it is necessary to subtruct line length because we don't want to work with
next cacheline
b) end address is not aligned:
Just align it to be ready for ASM code.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:22:00 +02:00
Michal Simek
385e1efafc microblaze: Fix consistent-sync code
PCI_DMA_FROMDEVICE should call invalidation not flushing.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:22:00 +02:00
Michal Simek
598acab44d microblaze: Define correct L1_CACHE_SHIFT value
Microblaze cacheline length is configurable and current cpu
uses two cacheline length 4 and 8.

We are taking conservative maximum value to be sure that cacheline
alignment is satisfied for all cases.

Here is the calculation for cacheline lenght 8  32bit=4Byte values
which is corresponding with SHIFT 5.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:59 +02:00
Michal Simek
77543cebab microblaze: cpuinfo shows cache line length
Show cache line length in /proc/cpuinfo.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:59 +02:00
Michal Simek
de925d9d3b microblaze: Fix kmalloc alignment on non-coherent DMA platforms
Based on PowerPC patche 52142e756e

PowerPC description:
On platforms doing non-coherent DMA (4xx, 8xx, ...), it's important
that the kmalloc minimum alignment is set to the cache line size, to
avoid sharing cache lines between different objects, so that DMA to
one of the objects doesn't corrupt the other.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:59 +02:00
Michal Simek
c17e1a1ced microblaze: Fix typo fault in cache code
Copy & paste error.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:59 +02:00
Michal Simek
f1525765fb microblaze: Fix consistent code
This patch fix consistent code which had problems with consistent_free
function.
I am not sure if we need to call flush_tlb_all after it but it keeps
tlbs synced.
I added noMMU and MMU version together.

Uncached shadow feature is not tested.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:59 +02:00
Michal Simek
16f6e99892 microblaze: pci-dma: use include/linux/dma-mapping.h
Based on af407c6db1
and f41b177157

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:59 +02:00
Michal Simek
22dcc2e3b9 microblaze: page.h: Remove get_user_page and free_user_page
Remove ancient macros which are here from Linux-2.4

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:59 +02:00
Michal Simek
43f2a6e8b1 microblaze: Remove "cache" optimized copy_page function
Current implementation doesn't handle dcache_line_length
correctly that's why is better to use generic memcpy.

Cache optimized function could be good way howto improve
performance but must be based on benchmarking not blind
function like this.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:58 +02:00
Nick Piggin
21e1c93631 microblaze: invoke oom-killer from page fault
As explained in commit 1c0fe6e3bd, we want to call the architecture independent
oom killer when getting an unexplained OOM from handle_mm_fault, rather than
simply killing current.

Cc: microblaze-uclinux@itee.uq.edu.au
Cc: Michal Simek <monstr@monstr.eu>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:58 +02:00
Randy Dunlap
f3ff8212a2 microblaze: fix divide by zero exception message
Fix divide exception message to say "divide by zero".

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc:	Michal Simek <monstr@monstr.eu>
Cc:	microblaze-uclinux@itee.uq.edu.au
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:58 +02:00
Michal Simek
113a591a17 microblaze: Add isa_dma_bridge_buggy to dma.h
It is necessary for several drivers.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:58 +02:00
Michal Simek
e768223109 microblaze: Remove ancient code
I found several function which we don't use that's why I am removing them.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:58 +02:00
Michal Simek
63f1032b97 microblaze: Quiet section mismatch warnings for MMU version
Remove section mismatch - based on ppc aproach.

WARNING: vmlinux.o(.text+0x64834): Section mismatch in reference
from the function __pte_alloc_kernel() to the function .init.text:early_get_page()
The function __pte_alloc_kernel() references
the function __init early_get_page().
This is often because __pte_alloc_kernel lacks a __init
annotation or the annotation of early_get_page is wrong.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:58 +02:00
Steven J. Magnani
7a0248e819 microblaze: Quiet section mismatch warnings
_start is located in .text, which causes mismatch warnings with
machine_early_init() and start_kernel() in .init.text.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:57 +02:00
Steven J. Magnani
e6d7961e5b microblaze: Fix IRQ entry/exit ftracing
Function traces on Microblaze don't include IRQ entry and exit arrows,
i.e.

 0)               |                            memcpy_toiovec() {
 0)   ==========> |
 0)               |                              do_IRQ() {
 ...
 0)   <========== |
 0) ! 5414.000 us |                            }

...because do_IRQ() doesn't have the proper attributes.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:57 +02:00
Michal Simek
c86fac4382 microblaze: resource/PCI: align functions now return start of resource
This change should be part of b26b2d494b

Origin description:

resource/PCI: align functions now return start of resource

As suggested by Linus, align functions should return the start
of a resource, not void. An update of "res->start" is no longer
necessary.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:57 +02:00
Michal Simek
8a66da71fa microblaze: PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs
This change should be part of 89a74ecccd

Origin description:

PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs

No functional change; this converts loops that iterate from 0 to
PCI_BUS_NUM_RESOURCES through pci_bus resource[] table to use the
pci_bus_for_each_resource() iterator instead.

This doesn't change the way resources are stored; it merely removes
dependencies on the fact that they're in a table.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-05-06 11:21:57 +02:00
Michal Simek
af2b021fd6 microblaze: Remove unused variable from ptrace
Patch b3c1e01a09 should do it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-07 15:47:55 +02:00
John Linn
7a325aa26c microblaze: io.h: Add io big-endian function
Add new io big-endian function. They will be used
for uartlite and spi driver.

Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-07 15:47:37 +02:00
Michal Simek
4bb30baa6d microblaze: Fix futex code
Use logical and NOT for ANDN. It was likely type fault.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-07 07:27:25 +02:00
Steven J. Magnani
d2bf98e6fc microblaze: Fix ftrace_update_ftrace_func panic
The Microblaze dynamic ftrace code assumes a call ordering that is not met
in all scenarios. Specifically, executing a command similar to:

  echo 105 > /sys/kernel/debug/tracing/set_ftrace_pid

before any other tracing-related commands results in a kernel panic:

  BUG: failure at arch/microblaze/kernel/ftrace.c:198/ftrace_update_ftrace_func()!

Recoding ftrace_update_ftrace_func() to use &ftrace_caller directly eliminates
the need to capture its address elsewhere (and thus rely on a particular call
sequence).

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-07 07:27:25 +02:00
Tejun Heo
336f5899d2 Merge branch 'master' into export-slabh 2010-04-05 11:37:28 +09:00
Michal Simek
ca3865bae5 microblaze: Support word copying in copy_tofrom_user
Word copying is used only for aligned addresses.
Here is space for improving to use any better copying technique.
Look at memcpy implementation.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:25 +02:00
Michal Simek
6059b3cbeb microblaze: Print early printk information to log buffer
If early printk console is not enabled then all messages
are written to log buffer.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:25 +02:00
Michal Simek
3f21893586 microblaze: head.S typo fix
I forget to change register name in comments.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek
0691c97d74 microblaze: Use MICROBLAZE_TLB_SIZE in asm code
TLB size was hardcoded in asm code. This patch brings ability
to change TLB size only in one place. (mmu.h).

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek
9373dd6ab1 microblaze: Kconfig Fix - pci
I forget to remove pci Kconfig option.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek
78ebfa884b microblaze: Adding likely macros
On the base on GCOV analytics is helpful to add likely/unlikely
macros.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek
13851966da microblaze: Add .type and .size to ASM functions
Cachegrind analysis need this fix to be able to log asm functions.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek
e84452dd9f microblaze: Fix TLB macros
To be able to do trace TLB operations.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek
3765d6958d microblaze: Use instruction with delay slot
Sync labels.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:23 +02:00
Michal Simek
bd1637d63e microblaze: Remove additional resr and rear loading
RESR and REAR uses the same regs in whole file.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:23 +02:00
Michal Simek
b175bcfe31 microblaze: Change register usage for ESR and EAR
This change synchronize register usage in code.
ESR = R4
EAR = R3

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:23 +02:00
Michal Simek
7a6bbdc930 microblaze: Prepare work for optimization in exception code
Any sync branch must follow mts instructions not mfs.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:23 +02:00
Michal Simek
708e7153d6 microblaze: Add DEBUG option
Disable debug option in asm code.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:23 +02:00
Michal Simek
ee68f1745e microblaze: Support systems without lmb bram
When the system has no lmb bram, main memory should be start from
zero because of microblaze vectors.

DTS fragment could look like:
	DDR2_SDRAM: memory@0 {
		device_type = "memory";
		reg = < 0x0 0x10000000 >;
	} ;

Then you have to setup CONFIG_KERNEL_BASE_ADDR=0 which caused
that kernel physical start address will be zero. On reset vector place
will be jump to 0x100 and on 0x100 starts kernel text.

You have to solve how to load the kernel before cpu starts.
Tested with XMD.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:23 +02:00
Michal Simek
89ae9753ae microblaze: uaccess: Sync strlen, strnlen, copy_to/from_user
Last sync.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:23 +02:00
Michal Simek
94804a9b3d microblaze: uaccess: Unify __copy_tofrom_user
Move to generic location.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:22 +02:00
Michal Simek
cca79120c2 microblaze: uaccess: Move functions to generic location
noMMU and MMU use them.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:22 +02:00
Michal Simek
ef4e277b5d microblaze: uaccess: Fix put_user for noMMU
Here is small regression on dhrystone tests and I think
that on all benchmarking tests. It is due to better checking
mechanism in put_user macro

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:22 +02:00
Michal Simek
3a6d77245e microblaze: uaccess: Fix get_user macro for noMMU
Use unified version.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:22 +02:00
Michal Simek
527bdb52d5 microblaze: uaccess: fix clear_user for noMMU kernel
Previous patches fixed only MMU version and this is the first
patch for noMMU kernel

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:21 +02:00
Michal Simek
40e11e3380 microblaze: uaccess: Fix strncpy_from_user function
Generic implementation for noMMU and MMU version

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:21 +02:00
Michal Simek
4270690bd4 microblaze: uaccess: fix copy_from_user macro
copy_from_user macro also use copy_tofrom_user function

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:21 +02:00
Michal Simek
cc5a428b7a microblaze: uaccess: copy_to_user unification
noMMU and MMU kernel will use copy copy_tofrom_user
asm implementation.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:20 +02:00
Michal Simek
0dcb409de7 microblaze: uaccess: sync put/get/clear_user macros
Add macro description and resort.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:20 +02:00
Michal Simek
8b651aa4a7 microblaze: uaccess: fix put_user and get_user macros
Use FIXUP macros and resort them.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:20 +02:00