Commit Graph

120 Commits

Author SHA1 Message Date
Markus Brunner
cbea270714 gianfar: stop send queue before resetting gianfar
After a transmit timed out, the reset task will be called, which will free the
allocated resources(stop_gfar). If gfar_poll will be called before the
resources get allocated again gfar_clean_tx_ring will call
dev_kfree_skb_any(NULL).

Example crash:

ops: Kernel access of bad area, sig: 11 [#1]
PREEMPT RSBBA100
Modules linked in:
NIP: c01a10c4 LR: c013b254 CTR: c013c038
REGS: c02e7d20 TRAP: 0300   Not tainted  (2.6.27.20)
MSR: 00001032 <ME,IR,DR>  CR: 24000082  XER: 20000000
DAR: 000000a0, DSISR: 20000000
TASK = c02ce578[0] 'swapper' THREAD: c02e6000
GPR00: 000000a0 c02e7dd0 c02ce578 00000000 00000040 00000001 c02ec1c0 
00001032
GPR08: c080d1e0 df9ea800 00000000 00000000 24000082 ffffffff 0404f000 
00000000
GPR16: ffffffbf ffffffff ffffffff ffdff7ff ffffffff c02d0fd4 00100100 
00200200
GPR24: c031220c 00000001 00000001 00000000 00000000 df849800 ff109000 
df849b80
NIP [c01a10c4] dev_kfree_skb_irq+0x18/0x70
LR [c013b254] gfar_clean_tx_ring+0x70/0x11c
Call Trace:
[c02e7dd0] [c003e978] update_wall_time+0x730/0x744 (unreliable)
[c02e7df0] [c013b254] gfar_clean_tx_ring+0x70/0x11c
[c02e7e10] [c013c07c] gfar_poll+0x44/0x150
[c02e7e30] [c01a064c] net_rx_action+0xa8/0x19c
[c02e7e70] [c00251d4] __do_softirq+0x64/0xc0
[c02e7e90] [c0006384] do_softirq+0x40/0x58
[c02e7ea0] [c00250a8] irq_exit+0x40/0x9c
[c02e7eb0] [c000642c] do_IRQ+0x90/0xac
[c02e7ec0] [c0010ab4] ret_from_except+0x0/0x14
--- Exception: 501 at cpu_idle+0x9c/0xf8
    LR = cpu_idle+0x9c/0xf8
[c02e7f80] [c0009820] cpu_idle+0x58/0xf8 (unreliable)
[c02e7fa0] [c01fb8c8] __got2_end+0x7c/0x90
[c02e7fc0] [c026c794] start_kernel+0x2c0/0x2d4
[c02e7ff0] [00003438] 0x3438
Instruction dump:
7fa00124 80010024 bba10014 38210020 7c0803a6 4e800020 9421ffe0 7c0802a6
7c6b1b78 90010024 380300a0 bfa10014 <7d200028> 3129ffff 7d20012d 40a2fff4
Kernel panic - not syncing: Fatal exception in interrupt

This Patch calls netif_stop_queue before calling stop_gfar.

Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-15 02:35:40 -07:00
David S. Miller
ee76db5e9e gianfar: Fix use-after-of_node_put() in gfar_of_init().
We can't put 'mdio' until after we've used it in the
fsl_pq_mdio_bus_name() call.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-29 01:19:37 -07:00
Li Yang
5b28beaf88 gianfar: only check headroom when FCB is needed
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 15:54:30 -07:00
David S. Miller
bd14ba842c gianfar: Fix kfree(skb)
Noticed by Li Yang.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 01:10:58 -07:00
Stephen Hemminger
54dc79fe0d gianfar: fix headroom expansion code
The code that was added to increase headroom was wrong.
It doesn't handle the case where gfar_add_fcb() changes the skb.
Better to do check at start of transmit (outside of lock), where
error handling is better anyway.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 00:38:45 -07:00
Li Yang
93c1285c5d gianfar: reallocate skb when headroom is not enough for fcb
Gianfar uses a hardware header FCB for offloading.  However when used
with bridging or IP forwarding, TX skb might not have enough headroom
for the FCB.  Reallocate skb for such cases.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25 17:21:19 -07:00
Anton Vorontsov
29ded5f76c gianfar: Fix build with CONFIG_PM enabled
commit 4826857f1b ("gianfar: pass the
proper dev to DMA ops") introduced this build breakage:

  CC      drivers/net/gianfar.o
drivers/net/gianfar.c: In function 'gfar_suspend':
drivers/net/gianfar.c:552: error: 'struct gfar_private' has no member named 'dev'
drivers/net/gianfar.c: In function 'gfar_resume':
drivers/net/gianfar.c:601: error: 'struct gfar_private' has no member named 'dev'
make[2]: *** [drivers/net/gianfar.o] Error 1

Fix this by converting suspend and resume routines to use
gfar_private->ndev.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:27:55 -07:00
Kumar Gala
4826857f1b gianfar: pass the proper dev to DMA ops
We need to be passing the of_platform device struct into the DMA ops as
its the one that has the archdata setup to know which low-level DMA ops we
should be using (not the net_device one).  This isn't an issue until we
expect the archdata to be setup correctly.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18 23:28:22 -07:00
Andy Fleming
26ccfc37da gianfar: Convert to use netdev_ops
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 12:05:23 -07:00
David S. Miller
aa4abc9bcc Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/wireless/iwlwifi/iwl-tx.c
	net/8021q/vlan_core.c
	net/core/dev.c
2009-03-01 21:35:16 -08:00
Rini van Zetten
7958a45310 gianfar: Do right check on num_txbdfree
This patch fixes a wrong check on num_txbdfree. It could lead to
num_txbdfree become nagative.  Result was that the gianfar stops
sending data.

Changes from first version :
- removed a space between parens (David Millers comment)
- full email address in signed off line

Signed-off-by: Rini van Zetten <rini@arvoo.nl>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-27 03:18:48 -08:00
David S. Miller
0ecc103aec Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/gianfar.c
2009-02-09 23:22:21 -08:00
Jarek Poplawski
8707bdd48a gianfar: Fix boot hangs while bringing up gianfar ethernet
Ira Snyder found that commit 8c7396aebb
"gianfar: Merge Tx and Rx interrupt for scheduling clean up ring" can
cause hangs. It's because there was removed clearing of interrupts in
gfar_schedule_cleanup() (which is called by an interrupt handler) in
case when netif scheduling has been disabled. This patch brings back
this action and a comment.

Reported-by: Ira Snyder <iws@ovro.caltech.edu>
Reported-by: Peter Korsgaard <jacmet@sunsite.dk>
Bisected-by: Ira Snyder <iws@ovro.caltech.edu>
Tested-by: Peter Korsgaard <jacmet@sunsite.dk>
Tested-by: Ira Snyder <iws@ovro.caltech.edu>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-09 14:59:30 -08:00
David S. Miller
7870389478 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2009-02-04 16:52:41 -08:00
Andy Fleming
4d7902f22b gianfar: Fix stashing support
Stashing is only supported on the 85xx (e500-based) SoCs.  The 83xx and 86xx
chips don't have a proper cache for this.  U-Boot has been updated to add
stashing properties to the device tree nodes of gianfar devices on 85xx.  So
now we modify Linux to keep stashing off unless those properties are there.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-04 16:43:44 -08:00
Andy Fleming
0fd56bb5be gianfar: Add support for skb recycling
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-04 16:43:16 -08:00
Andy Fleming
1577ecef76 netdev: Merge UCC and gianfar MDIO bus drivers
The MDIO bus drivers for the UCC and gianfar ethernet controllers are
essentially the same.  There's no reason to duplicate that much code.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-04 16:42:35 -08:00
Andy Fleming
b98ac702f4 gianfar: Fix potential soft reset race
SOFT_RESET must be asserted for at least 3 TX clocks in order for it to work
properly.  The syncs in the gfar_write() commands have been hiding this, but
we need to guarantee it.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-04 16:38:05 -08:00
Anton Vorontsov
b2f66d1839 gianfar: Fix sparse warnings
This patch fixes following sparse warnings:

  CHECK   gianfar_ethtool.c
gianfar_ethtool.c:610:26: warning: symbol 'gfar_ethtool_ops' was not declared. Should it be static?
  CHECK   gianfar_mii.c
gianfar_mii.c:108:35: warning: cast adds address space to expression (<asn:2>)
gianfar_mii.c:119:35: warning: cast adds address space to expression (<asn:2>)
gianfar_mii.c:128:35: warning: cast adds address space to expression (<asn:2>)
gianfar_mii.c:272:5: warning: cast removes address space of expression
gianfar_mii.c:271:15: warning: cast adds address space to expression (<asn:2>)
gianfar_mii.c:340:11: warning: cast adds address space to expression (<asn:2>)
  CHECK   gianfar_sysfs.c
gianfar_sysfs.c:84:1: warning: symbol 'dev_attr_bd_stash' was not declared. Should it be static?
gianfar_sysfs.c:133:1: warning: symbol 'dev_attr_rx_stash_size' was not declared. Should it be static?
gianfar_sysfs.c:175:1: warning: symbol 'dev_attr_rx_stash_index' was not declared. Should it be static?
gianfar_sysfs.c:213:1: warning: symbol 'dev_attr_fifo_threshold' was not declared. Should it be static?
gianfar_sysfs.c:250:1: warning: symbol 'dev_attr_fifo_starve' was not declared. Should it be static?
gianfar_sysfs.c:287:1: warning: symbol 'dev_attr_fifo_starve_off' was not declared. Should it be static?

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01 00:54:16 -08:00
Anton Vorontsov
2884e5cc92 gianfar: Implement proper, per netdevice wakeup management
This patch implements wakeup management for the gianfar driver.

The driver should set wakeup enable if WOL is enabled, so that
phylib won't power off an attached PHY.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01 00:52:34 -08:00
David S. Miller
3eacdf58c2 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2009-01-26 17:43:16 -08:00
Anton Vorontsov
cd1f55a5b4 gianfar: Revive VLAN support
commit 77ecaf2d5a ("gianfar: Fix VLAN
HW feature related frame/buffer size calculation") wrongly removed
priv->vlgrp assignment, and now priv->vlgrp is always NULL.

This patch fixes the issue, plus fixes following sparse warning
introduced by the same commit:
gianfar.c:1406:13: warning: context imbalance in 'gfar_vlan_rx_register' - wrong count at exit

gfar_vlan_rx_register() checks for "if (old_grp == grp)" and tries
to return w/o dropping the lock.

According to net/8021q/vlan.c VLAN core issues rx_register() callback:
1. In register_vlan_dev() only on a newly created group;
2. In unregister_vlan_dev() only if the group becomes empty.

Thus the check in the gianfar driver isn't needed.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-26 14:33:23 -08:00
Ben Hutchings
288379f050 net: Remove redundant NAPI functions
Following the removal of the unused struct net_device * parameter from
the NAPI functions named *netif_rx_* in commit 908a7a1, they are
exactly equivalent to the corresponding *napi_* functions and are
therefore redundant.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 14:33:50 -08:00
Anton Vorontsov
a6d0b91ae5 gianfar: Fix soft lockup with multi-interrupt TSECs
This patch fixes following bug:

BUG: soft lockup - CPU#0 stuck for 61s! [S03mountvirtfs-:922]
Modules linked in:
NIP: c006505c LR: c00675f0 CTR: c0020438
REGS: c7a1db90 TRAP: 0901   Not tainted  (2.6.28-rc8-01311-g8c7396a)
MSR: 00009032 <EE,ME,IR,DR>  CR: 28248442  XER: 20000000
TASK = c7a288a0[922] 'S03mountvirtfs-' THREAD: c7a1c000
GPR00: 00009032 c7a1dc40 c7a288a0 00000024 c79a1840 00000000 00000300 00000020
GPR08: c035f97c 00000000 00004008 c04d5210 00000000
NIP [c006505c] handle_IRQ_event+0x34/0xb0
LR [c00675f0] handle_level_irq+0xa8/0x144
Call Trace:
[c7a1dc40] [c00204d8] ipic_mask_irq+0xa0/0xb4 (unreliable)
[c7a1dc60] [c00675f0] handle_level_irq+0xa8/0x144
[c7a1dc80] [c00067f8] do_IRQ+0x78/0x108
[c7a1dc90] [c0014d7c] ret_from_except+0x0/0x14
--- Exception: 501 at gfar_schedule_cleanup+0x54/0x7c
    LR = gfar_transmit+0x14/0x28
[c7a1dd50] [c0352a3c] _spin_unlock_irqrestore+0x18/0x30 (unreliable)
[c7a1dd60] [c01f49a8] gfar_transmit+0x14/0x28
[c7a1dd70] [c0065084] handle_IRQ_event+0x5c/0xb0
[c7a1dd90] [c00675f0] handle_level_irq+0xa8/0x144
[c7a1ddb0] [c00067f8] do_IRQ+0x78/0x108
[c7a1ddc0] [c0014d7c] ret_from_except+0x0/0x14
--- Exception: 501 at up_read+0x10/0x48
    LR = do_page_fault+0x2b0/0x3e0
[c7a1de80] [c7a177e8] 0xc7a177e8 (unreliable)
[c7a1de90] [c0017964] do_page_fault+0x2b0/0x3e0
[c7a1df40] [c0014b14] handle_page_fault+0xc/0x80
--- Exception: 301 at 0xfe98b7c
    LR = 0xfe989c0
Instruction dump:
7c0802a6 bf810010 7c9f2378 7c7c1b78 90010024 80040004 70090020 40820010
7c0000a6 60008000 7c000124 3bc00000 <3ba00000> 48000010 83ff0014 2f9f0000


The bug introduced by commit 8c7396aebb
("gianfar: Merge Tx and Rx interrupt for scheduling clean up ring").

The commit merged TX and RX interrupt code into a single routine that
schedules NAPI, but no locks were introduced. This causes irq races, so
when irqs are enabled and netif_rx_schedule_prep() returns 0, nobody
disable the interrupts again. This leads to interrupt storm and finally
to the lockup.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-12 21:57:34 -08:00
Clifford Wolf
0faac9f75f netdev: gianfar: add MII ioctl handler
This is the same kind of wrapper that can also be found in many
other network device drivers.

Tested with a freescale MPC8349E host CPU:
Toggled the interface LEDs on a DP83865 PHY.

Signed-off-by: Clifford Wolf <clifford@clifford.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:06:35 -08:00
Kumar Gala
a1d8f6015e gianfar: Fixup use of BUS_ID_SIZE
Commit b31a1d8b41 ("gianfar: Convert
gianfar to an of_platform_driver") went back to using BUS_ID_SIZE
instead of sizeof() as per the larger patch series that will remove
"char bus_id[20]" from struct device.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-08 10:58:38 -08:00
Li Yang
f430e49e9e gianfar: ensure ECNTRL[R100] is cleared on link state change
When changing the link between 100Mbps and 1Gbps in SGMII mode it was
found out that the link would stop working.  The issue is that ECNTRL[R100]
needs to be cleared when in 1Gbps mode.  Older reference manuals didn't
require the explicitly clearing but has since been found it that it is
needed.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-06 14:08:10 -08:00
Neil Horman
908a7a16b8 net: Remove unused netdev arg from some NAPI interfaces.
When the napi api was changed to separate its 1:1 binding to the net_device
struct, the netif_rx_[prep|schedule|complete] api failed to remove the now
vestigual net_device structure parameter.  This patch cleans up that api by
properly removing it..

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22 20:43:12 -08:00
Andy Fleming
4219988459 gianfar: Continue polling until both tx and rx are empty
gfar_poll would declare polling done once the rx queue was empty,
but the tx queue could still have packets left.

Stolen mostly from the e1000 driver.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 16:52:30 -08:00
Dai Haruki
8c7396aebb gianfar: Merge Tx and Rx interrupt for scheduling clean up ring
No clean up function is executed in the interrupt context by this patch.

Signed-off-by: Dai Haruki <dai.haruki@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 16:52:00 -08:00
Dai Haruki
c50a5d9aed gianfar: Use interface name in interrupt name to distinguish the source.
Interface name (ex. eth0) is used as the prefix for the interrupt name,
with _rx, _tx, and _er appended to distinguish multiple interrupts on
the same interface.

Signed-off-by: Dai Haruki <dai.haruki@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 16:51:32 -08:00
Dai Haruki
4669bc9074 gianfar: Add Scatter Gather support
Scatter Gather support in gianfar driver to handle fragmented frames on
the transmit side.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Dai Haruki <dai.haruki@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 16:51:04 -08:00
Andy Fleming
8882d9a600 gianfar: Fix packet drop when out of memory
The patch which fixed gianfar so it drops packets when it runs out
of memory left in the code which frees the skb when it drops packets.
Change the code so that we only free the skb if the new skb was successfully
created.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 16:50:22 -08:00
Dai Haruki
5a5efed481 gianfar: Make all BD status writes 32-bit
Whenever we want to update the status field in a BD, we usually want to
update the length field, too.  By combining them into one 32-bit field, we
reduce the number of stores to memory shared with the controller, and we
eliminate the need for order-enforcement, as the length and "READY" bit are
now updated atomically at the same time.

Signed-off-by: Dai Haruki <Dai.Haruki@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 15:34:50 -08:00
Andy Fleming
31de198b4d gianfar: Add macros for stepping through BDs
This code is based strongly on code from Dai Haruki <Dai.Haruki@freescale.com>.

The gianfar Buffer Descriptors are arranged in a circular array, the end of
which is denoted by setting the "WRAP" bit in the descriptor.  However, the
software knows the end of the ring because it knows how many descriptors are
there.  Rather than check each descriptor for whether the WRAP bit is set,
use pointer math to determine where the next BD is.  This is also useful for
when we want to look at BDs other than the very next one (for Scatter-Gather).

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 15:33:40 -08:00
Dai Haruki
a22823e72a gianfar: Remove unused gfar_add_fcb() function parameter
- Also, use cacheable_memzero instead of memset for performance reasons.

Signed-off-by: Dai Haruki <dai.haruki@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 15:32:11 -08:00
Dai Haruki
2c2db48acb gianfar: Enable padding and Optimize the frame prepended bytes handling
The eTSEC can prepend up to 32 bytes to a received frame, usually for the
purpose of aligning the IP address to a word boundary, so this turns it on.

While we're in there, make the handling of the pre-frame bytes (padding and
Frame Control Block) cleaner.

Signed-off-by: Dai Haruki <dai.haruki@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 15:31:15 -08:00
Dai Haruki
77ecaf2d5a gianfar: Fix VLAN HW feature related frame/buffer size calculation.
Optimize the VLAN checking logic as well.

Signed-off-by: Dai Haruki <dai.haruki@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 15:30:48 -08:00
Dai Haruki
12dea57be5 gianfar: Fix eTSEC configuration procedure
Fix some bugs in the ethtool configuration functions:
* gfar_clean_rx_ring should not be called with interrupts disabled.
* Update last transmission time to avoid tx timeout.
* Delete redundant NETIF_F_IP_CSUM check in gfar_start_xmit
* Use netif_tx_lock_bh when reconfiguring the tx csum

Signed-off-by: Dai Haruki <dai.haruki@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 15:30:20 -08:00
Dai Haruki
b46a8454cd gianfar: Optimize interrupt coalescing configuration
Store the interrupt coalescing values in the form in which they will be
written to the interrupt coalescing registers.  This puts a little overhead
into the ethtool configuration, and takes it out of the interrupt handler

Signed-off-by: Dai Haruki <dai.haruki@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 15:29:52 -08:00
Andy Fleming
b31a1d8b41 gianfar: Convert gianfar to an of_platform_driver
Does the same for the accompanying MDIO driver, and then modifies the TBI
configuration method.  The old way used fields in einfo, which no longer
exists.  The new way is to create an MDIO device-tree node for each instance
of gianfar, and create a tbi-handle property to associate ethernet controllers
with the TBI PHYs they are connected to.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 15:29:15 -08:00
Andy Fleming
257d938a0c gianfar: Use gfar_halt to stop DMA in gfar_probe
gfar_halt does everything we want to do there, including disabling
TX/RX.  It also doesn't unnecessarily enable DMA if it's already
stopped.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 15:25:45 -08:00
David S. Miller
198d6ba4d7 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/isdn/i4l/isdn_net.c
	fs/cifs/connect.c
2008-11-18 23:38:23 -08:00
Andy Fleming
81183059e8 gianfar: Fix DMA unmap invocations
We weren't unmapping DMA memory, which will break when gianfar gets used
on systems with more than 32-bits of memory.  Also, it's just plain wrong.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-14 18:18:30 -05:00
Kay Sievers
fb28ad3590 net: struct device - replace bus_id with dev_name(), dev_set_name()
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-10 13:55:14 -08:00
David S. Miller
babcda74e9 drivers/net: Kill now superfluous ->last_rx stores.
The generic packet receive code takes care of setting
netdev->last_rx when necessary, for the sake of the
bonding ARP monitor.

Drivers need not do it any more.

Some cases had to be skipped over because the drivers
were making use of the ->last_rx value themselves.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03 21:11:17 -08:00
David S. Miller
a1744d3bee Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/wireless/p54/p54common.c
2008-10-31 00:17:34 -07:00
Trent Piepho
bdb59f949d gianfar: Don't reset TBI<->SerDes link if it's already up
The link may be up already via the chip's reset strapping, or though action
of U-Boot, or from the last time the interface was brought up.  Resetting
the link causes it to go down for several seconds.  This can significantly
increase the time from power-on to DHCP completion and a device being
accessible to the network.

Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-31 00:59:53 -04:00
Trent Piepho
c132419e56 gianfar: Fix race in TBI/SerDes configuration
The init_phy() function attaches to the PHY, then configures the
SerDes<->TBI link (in SGMII mode).  The TBI is on the MDIO bus with the PHY
(sort of) and is accessed via the gianfar's MDIO registers, using the
functions gfar_local_mdio_read/write(), which don't do any locking.

The previously attached PHY will start a work-queue on a timer, and
probably an irq handler as well, which will talk to the PHY and thus use
the MDIO bus.  This uses phy_read/write(), which have locking, but not
against the gfar_local_mdio versions.

The result is that PHY code will try to use the MDIO bus at the same time
as the SerDes setup code, corrupting the transfers.

Setting up the SerDes before attaching to the PHY will insure that there is
no race between the SerDes code and *our* PHY, but doesn't fix everything.
Typically the PHYs for all gianfar devices are on the same MDIO bus, which
is associated with the first gianfar device.  This means that the first
gianfar's SerDes code could corrupt the MDIO transfers for a different
gianfar's PHY.

The lock used by phy_read/write() is contained in the mii_bus structure,
which is pointed to by the PHY.  This is difficult to access from the
gianfar drivers, as there is no link between a gianfar device and the
mii_bus which shares the same MDIO registers.  As far as the device layer
and drivers are concerned they are two unrelated devices (which happen to
share registers).

Generally all gianfar devices' PHYs will be on the bus associated with the
first gianfar.  But this might not be the case, so simply locking the
gianfar's PHY's mii bus might not lock the mii bus that the SerDes setup
code is going to use.

We solve this by having the code that creates the gianfar platform device
look in the device tree for an mdio device that shares the gianfar's
registers.  If one is found the ID of its platform device is saved in the
gianfar's platform data.

A new function in the gianfar mii code, gfar_get_miibus(), can use the bus
ID to search through the platform devices for a gianfar_mdio device with
the right ID.  The platform device's driver data is the mii_bus structure,
which the SerDes setup code can use to lock the current bus.

Signed-off-by: Trent Piepho <tpiepho@freescale.com>
CC: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-31 00:59:46 -04:00
Johannes Berg
e174961ca1 net: convert print_mac to %pM
This converts pretty much everything to print_mac. There were
a few things that had conflicts which I have just dropped for
now, no harm done.

I've built an allyesconfig with this and looked at the files
that weren't built very carefully, but it's a huge patch.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27 17:06:18 -07:00