Commit Graph

3049 Commits

Author SHA1 Message Date
Zhu Yi
efa7e0691f [PATCH] ipw2200: Fix compile error when CONFIG_IPW2200_DEBUG is not selected
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:34 -04:00
Zhu Yi
8b5f9171f6 [PATCH] ipw2200: Update version stamp to 1.1.4
Update version ipw2200 stamp to 1.1.4

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:34 -04:00
Zhu Yi
094c4d2df6 [PATCH] ipw2200: enable wireless extension passive scan
This patch enables the ipw2200 driver to support passive scanning as
offered by the wireless extensions. For this, I enhanced the ipw_wx_set_scan
function in such a way that it differentiates between a passive and an
active scan request. Additionally, I added a new function called
ipw_request_passive_scan that is similiar to the ipw_request_scan
function to perform passive scans. Last but not least, I added a field
(in fact it is a work_struct struct) called request_passive_scan to
the ipw_priv struct.

Signed-off-by: Thomas King <king@informatik.uni-mannheim.de>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:34 -04:00
Zhu Yi
efbd809829 [PATCH] ipw2100: Fix deadlock detected by lockdep
Fix by removing dependency between priv->action_sem and rtnl semaphore.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:33 -04:00
Zhu Yi
c8c22c942e [PATCH] ipw2200: Add pci .shutdown handler
If we don't disable the card in the pci .shutdown method, there might be
pending interrupts still in the interrupt line after a reboot on some
platform. This patch fixes the problem by disable the hardware in the pci
.shutdown method.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:33 -04:00
Zhu Yi
b9bec768c3 [PATCH] ipw2200: Fix kernel Oops if cmdlog debug is enabled
When command error log debug is enabled, we write every host command and
parameters into a buffer. But we didn't alloc the parameter buffer for this
case. The patch adds struct cmdlog_host_cmd so that the buffer is allocated
from the stack.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:33 -04:00
Zhu Yi
d5f7ac2039 [PATCH] ipw2200: mark "iwconfig retry 255" as invalid
The ipw2200 firmware/ucode only support values from 0 to 254. So mark 255
as invalid.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:33 -04:00
Zhu Yi
88a93df4cb [PATCH] ipw2200: remove the MAC timestamp present field from radiotap head
IEEE80211_RADIOTAP_TSFT is defined as the Value in microseconds of the
MAC's 64-bit 802.11 Time Synchronization Function timer when the first bit
of the MPDU arrived at the MAC. Since ipw2200 hardware doesn't provide this
value, we disable this feature from the radiotap header present flag.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:32 -04:00
Zhu Yi
851ca2687e [PATCH] ipw2200: Fix ipw2200 QOS parameters endian issue
Signed-off-by: Jackie Wu <jackie.wu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:32 -04:00
Zhu Yi
39be0aaf20 [PATCH] ipw2200: remove unused struct ipw_rx_buffer
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:32 -04:00
Zhu Yi
a9f0d42321 [PATCH] ipw2200: Reassociate even if set the same essid.
This patch traps the case when the essid is being set to its
current value. If the essid is being set again and we are already
associated, chances are some other parameters have also been altered.
I think it is safer to do the re-association for this case.

Signed-off-by: Bill Moss <bmoss@clemson.edu>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:32 -04:00
Zhu Yi
ab644b0b51 [PATCH] ipw2200: ipw_wx_set_essid fix
This patch cleanups the ipw_wx_set_essid code and forces a reassociation
when setting the essid to "any". I have tested this patch with iwconfig. It
makes ipw2200 compliant with all the cases mentioned in the iwconfig man
page. The commands

iwconfig iface essid any
iwconfig iface essid -- any
iwconfig iface essid off
iwconfig iface essid on

all seemed to work correctly. None of this worked before the patch.

Note, this patch treats

iwconfig iface essid
iwconfig iface essid ""

The same. It produces an error message: essid: Unknown host.
Since an essid of "" is not mentioned in the iwconfig man page.

Signed-off-by: Bill Moss <bmoss@clemson.edu>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:31 -04:00
Zhu Yi
c580f67fd7 [PATCH] ipw2200: SIOCGIWFREQ ioctl returns frequency rather than channel
The SIOCGIWFREQ ioctl fills the request structure's freq field by setting
the exponent to 0 and the mantissa to the current channel number. The
iwconfig tool works around this behaviour by looking up the frequency
from the channel table if a frequency below 1kHz is returned, other tools
(e.g. kwlaninfo) don't. According to the comment in the iwconfig source
the driver is supposed to return the frequency, not the channel number.

Signed-off-by: Ingo van Lil <inguin@gmx.de>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:31 -04:00
Zhu Yi
01d478338f [PATCH] ipw2200: always enable frequently used debugging code
Moving part of the debugging code from IPW_DEBUG to IPW_LL_DEBUG (low level
debugging) and make IPW_DEBUG be always enabled. IPW_LL_DEBUG still needs
to be enabled by selecting CONFIG_IPW2200_DEBUG. But it is highly
deprecated for normal users since it adds higher debug verbosity in driver
hot paths.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:31 -04:00
Larry Finger
b6971c2191 [PATCH] bcm43xx: return correct hard_start_xmit error code
hard_start_xmit should return a NETIF_TX_FOO error code.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:30 -04:00
Larry Finger
80b60fa848 [PATCH] bcm43xx: optimization of DMA bitfields
Convert the bitfields in the bcm43xx DMA code to properly
aligned u8 booleans. These flags are accessed in the DMA
hotpath, so it's a good idea to waste a few bytes of memory
for the sake of speed by not requiring masking (and probably
shifting) of the bitfields.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:29 -04:00
Pavel Roskin
9c974fb1a4 [PATCH] orinoco: include linux/if_arp.h directly
Don't rely on linux/if_arp.h being included by other headers

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:29 -04:00
Pavel Roskin
821fe6831c [PATCH] orinoco: Don't use "extern inline" on locking functions
SPARC architecture has been fixed, so it's no longer needed.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:29 -04:00
Michael Buesch
7a9b8cdacf [PATCH] bcm43xx: re-add bcm43xx_rng_init() call
Calls to bcm43xx_rng_init() and bcm43xx_rng_exit() got
lost due to merge trouble. Re-add them.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:28 -04:00
Michael Buesch
9218e02bd4 [PATCH] bcm43xx: >1G and 64bit DMA support
This is a rewrite of the bcm43xx DMA engine. It adds support
for >1G of memory (for chips that support the extension bits)
and 64-bit DMA (for chips that support it).

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:28 -04:00
Sukadev Bhattiprolu
3b4c7d6403 [PATCH] kthread: airo.c
The airo driver is currently caching a pid for later use, but with the
implementation of containers, pids themselves do not uniquely identify a
task.  The driver is also using kernel_thread() which is deprecated in
drivers.

This patch essentially replaces the kernel_thread() with kthread_create().
It also stores the task_struct of the airo_thread rather than its pid.
Since this introduces a second task_struct in struct airo_info, the patch
renames airo_info.task to airo_info.list_bss_task.

As an extension of these changes, the patch further:

	 - replaces kill_proc() with kthread_stop()
	 - replaces signal_pending() with kthread_should_stop()
	 - removes thread completion synchronisation which is handled by
	   kthread_stop().

[akpm@osdl.org: fix races]
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Javier Achirica <achirica@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29 17:06:28 -04:00
John W. Linville
e4ac2663ea Merge branch 'from-linus' into upstream 2006-08-29 16:17:25 -04:00
Auke Kok
1db2740d78 e1000: Use module param array code
Use module param array code to distinguish between defaults and user
specified values.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-28 14:56:32 -07:00
Auke Kok
e7b4411704 e1000: remove unused part_num reading code
Remove the code that reads part_num from the EEPROM. This part number
is never displayed or queryable by the user.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-28 14:56:30 -07:00
Auke Kok
3d1dd8cb23 e1000: error out if we cannot enable PCI device on resume
Do not ignore errors returned by pci_enable_device, instead error out.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-28 14:56:27 -07:00
Vasily Averin
3fbbc72ef1 e1000: ring buffers resources cleanup
Memory leak was found in 2.6.18-rc4 and e1000 7.2.7 from sourceforge: We
should free resources allocated for previous rings if following allocation
fails.

Signed-off-by: Vasily Averin <vvs@sw.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-28 14:56:24 -07:00
Vasily Averin
6dd62ab063 e1000: e1000_probe resources cleanup
Fix resources cleanup in e1000_probe()

Signed-off-by: Vasily Averin <vvs@sw.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-28 14:56:22 -07:00
Vasily Averin
401a552b8b e1000: IRQ resources cleanup
irq leak was found in 2.6.18-rc4 and e1000 7.2.7 from sourceforge: if
e1000_up fails in e1000_open() we do not free allocated irq

Signed-off-by: Vasily Averin <vvs@sw.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-28 14:56:19 -07:00
Auke Kok
8fc897b00a e1000: Whitespace cleanup, cosmetic changes
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-28 14:56:16 -07:00
Jeff Garzik
699a712388 Merge branch 'upstream-fixes' of git://lost.foo-projects.org/~ahkok/git/netdev-2.6 into tmp 2006-08-24 00:45:36 -04:00
Brice Goglin
85a7ea1b0a [PATCH] myri10ge: use multicast support in the firmware
Some recent myri10ge firmwares support multicast filtering as well
as an extended mcp_irq_data structure (64 instead of 40 bytes).
The new command MXGEFW_CMD_SET_STATS_DMA_V2 is used to check
whether the firmware support those. mgp->fw_multicast_support
is defined accordingly.

When fw_multicast_support is set, some new multicast filtering
commands is passed to the board in myri10ge_set_multicast_list().

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 00:43:51 -04:00
Brice Goglin
c58ac5caeb [PATCH] myri10ge: use netif_msg_link
Add msg_enable and use netif_msg_link to enable/disable reporting
of link status changes since some Ethernet switches seem to generate
a lot of status changes under some circumstances and some people
want to avoid useless flooding in the logs.

Also add a counter for link status changes to statistics.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 00:43:51 -04:00
Jeff Garzik
8d8b03297c Merge branch 'upstream-fixes' into upstream 2006-08-24 00:42:07 -04:00
Jeff Garzik
357eb4cf75 Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes 2006-08-24 00:41:25 -04:00
Richard Purdie
c5ab964deb [PATCH] spectrum_cs: Fix firmware uploading errors
spectrum_cs: Fix the logic so we error when the device is *not* present!

This fixes firmware upload failures which prevent the driver from
working (the bug is also present in 2.6.17).

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 00:40:51 -04:00
Don Fry
8d91626636 [PATCH] pcnet32: break in 2.6.18-rc1 identified
A change I made for 2.6.17 and another for 2.6.18 do not work on older
pcnet32 chips which I do not have access to.  If the chip is a 79C970 or
79C965, do not try and suspend or check the link status.
I have tested with a 79C970A, 79C971, 79C972, 79C973, 79C975, 79C976,
and 79C978.

Signed-off-by:  Don Fry <brazilnut@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 00:40:03 -04:00
Joerg Ahrens
9a469abe9c [PATCH] xirc2ps_cs: Cannot reset card in atomic context
I am using a Xircom CEM33 pcmcia NIC which has occasional hardware problems.
If the netdev watchdog detects a transmit timeout, do_reset is called which
msleeps - this is illegal in atomic context.

This patch schedules the timeout handling as a workqueue item.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 00:38:32 -04:00
Eric Sesterhenn
cb958186ed [PATCH] Signedness issue in drivers/net/3c515.c
while playing with gcc 4.1 -Wextra warnings, I came across this one:

drivers/net/3c515.c:1027: warning: comparison of unsigned expression >= 0 is always true

Since i is unsigned the >= 0 check in the for loop is always true,
so we might spin there forever unless the if condition triggers.
Since i is only used in this loop, this patch changes it to
an integer.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 00:37:04 -04:00
John W. Linville
4c2be501b7 Merge branch 'upstream-fixes' into upstream 2006-08-23 14:22:14 -04:00
Pavel Roskin
9b5cce0764 [PATCH] hostap: Restore antenna selection settings after port reset
Intersil firmware 1.7.4 (and possibly others) loses the antenna
selection settings when the port is reset.

Signed-off-by: David Acker <dacker@roinet.com>
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-23 14:20:37 -04:00
Pavel Roskin
794ccda61c [PATCH] spectrum_cs: Fix incorrect use of pcmcia_dev_present()
This bug was introduced during the PCMCIA API conversion and broke
spectrum_cs completely.

Tracked down by Fredrik Tolf <fredrik@dolda2000.com>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-23 14:20:37 -04:00
John W. Linville
69758820a4 Merge branch 'from-linus' into upstream 2006-08-22 14:42:36 -04:00
Komuro
c67eebd674 [PATCH] network: axnet_cs.c: add new id (0x021b, 0x0202)
Signed-off-by: komurojun-mbn@nifty.com
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:52:05 -04:00
Jeff Garzik
1fb0a6c8c6 Merge branch 'upstream-fixes' into upstream 2006-08-19 17:51:34 -04:00
Krzysztof Halasa
a76b044af1 [PATCH] WAN: fix C101 card carrier handling
Hi,

One of my recent changes broke C101 carrier handling, this patch
fixes it. Also fixes an old TX underrun checking bug.

2.6.18 material. Please apply.
Thanks.

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:51:25 -04:00
Jeff Garzik
299176206b drivers/net: Remove deprecated use of pci_module_init()
From: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:48:59 -04:00
Henrik Kretzschmar
5243a37b79 [PATCH] remove an unused function from the header
Removes an unused function from the via-velocity-driver.
It doesn't make the binary smaller, but the source cleaner.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:46:33 -04:00
Jeff Garzik
a513c315f9 Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream 2006-08-19 17:46:13 -04:00
Brice Goglin
fd6746daad [PATCH] myri10ge: convert to netdev_alloc_skb
Convert the myri10ge driver to use netdev_alloc_skb instead of dev_alloc_skb,
which requires to propagate the net_device across several functions.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:45:17 -04:00
Brice Goglin
e700f9f4a2 [PATCH] myri10ge: define some previously hardwired firmware constants
Define some previously hardwired firmware constants.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:45:17 -04:00
Jeff Garzik
846050dd49 Merge branch 'upstream-fixes' into upstream 2006-08-19 17:45:11 -04:00
Vitaly Bordug
5b4b845434 [PATCH] FS_ENET: use PAL for mii management
This patch should update the fs_enet infrastructure to utilize Phy Abstraction
Layer subsystem.  Along with the above, there are apparent bugfixes, overhaul
and improvements.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:31 -04:00
Vitaly Bordug
11b0bacd71 [PATCH] PAL: Support of the fixed PHY
This makes it possible for HW PHY-less boards to utilize PAL goodies.  Generic
routines to connect to fixed PHY are provided, as well as ability to specify
software callback that fills up link, speed, etc.  information into PHY
descriptor (the latter feature not tested so far).

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:31 -04:00
Alexey Dobriyan
ec42cdb624 [PATCH] xircom_cb: wire up errors from pci_register_driver()
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Valerie Henson <val_henson@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:30 -04:00
Edgar E. Iglesias
239e44e1f0 [PATCH] skge: remember to run netif_poll_disable()
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@axis.com>
Cc: Stephen Hemminger <shemminger@osdl.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:30 -04:00
Jim Lewis
b68a60e598 [PATCH] Add ethtool -g support to Spidernet network driver
Add ethtool -g (show ring sizes) support to the Spidernet network driver.

Signed-off-by: James K Lewis <jklewis@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:30 -04:00
David Brownell
7e29f8bf39 [PATCH] build fixes: smc91x
Unclear how these bugs arrived, presumably from incorrect cleanup of
the 16-bit-only paths, but smc91x wouldn't build for OMAP.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Nicolas Pitre <nico@cam.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:30 -04:00
Roger Luethi
b933b4d938 [PATCH] via-rhine: add option avoid_D3 (work around broken BIOSes)
It looks like broken BIOSes controlling Rhine chips will remain in use in
significant numbers; such systems fail to come up via PXE after they have
been put into D3 (power-saving) mode.

This patch adds a module option for disabling the call that puts the chip
to sleep.

Signed-off-by: Roger Luethi <rl@hellgate.ch>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Joerg Bashir <brak@archive.org>
Cc: Tim Phipps <tim@phipps-hutton.freeserve.co.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:30 -04:00
Russell King
76cb4fe7c0 [PATCH] lockdep: fix smc91x
When booting using root-nfs, I'm seeing (independently) two lockdep dumps
in the smc91x driver.  The patch below fixes both.  Both dumps look like
real locking issues.

Nico - please review and ack if you think the patch is correct.

Dump 1:

Sending DHCP requests .
=================================
[ INFO: inconsistent lock state ]

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:29 -04:00
Stephen Hemminger
ab1976682f [PATCH] via-rhine: NAPI poll enable
The poll_enable should be in init_registers before enabling interrupts, not
in tx_timeout.  Thanks for spotting it Roger.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Cc: Roger Luethi <rl@hellgate.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:29 -04:00
Roger Luethi
633949a145 [PATCH] via-rhine: NAPI support
Add NAPI support to the via-rhine driver so that it can handle higher
speeds and doesn't get overloaded by interrupts as easily.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Roger Luethi <rl@hellgate.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:29 -04:00
Peter Korsgaard
a4d0927248 [PATCH] smc911x: Re-release spinlock on spurious interrupt
The smc911x driver forgets to release the spinlock on spurious interrupts.
This little patch fixes it.

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:29 -04:00
Kevin Hao
2fd0e33f4f [PATCH] net: Add netconsole support to dm9000 driver
Add netconsole support to dm9000 driver.

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:29 -04:00
Andrew Morton
330ce0de93 [PATCH] s2io build fix
sparc32:

drivers/net/s2io.c:2636: warning: implicit declaration of function 'disable_irq'
drivers/net/s2io.c:2656: warning: implicit declaration of function 'enable_irq'

Cc: Ananda Raju <Ananda.Raju@neterion.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:29 -04:00
Deepak Saxena
6fd7587bc2 [PATCH] Update smc91x driver with ARM Versatile board info
We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new
generic IRQ layer will complain thusly:

No IRQF_TRIGGER set_type function for IRQ 25 (<NULL>)

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Nicolas Pitre <nico@cam.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:29 -04:00
Li Yang
ce973b141d [PATCH] Freescale QE UCC gigabit ethernet driver
QE(QUICC Engine) is a new generation communication coprocessor, which can
be found on some of the latest Freescale PowerQUICC CPUs(e.g.  MPC8360).
The UCC(Unified Communications Controller) module of QE can work as gigabit
Ethernet device.  This patch provides driver for the device.

Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:29 -04:00
Adrian Bunk
e4c780b1ff [PATCH] drivers/net/e1000/: possible cleanups
- make needlessly global functions static
- #if 0 the following unused global functions:
  - e1000_hw.c: e1000_mc_addr_list_update()
  - e1000_hw.c: e1000_read_reg_io()
  - e1000_hw.c: e1000_enable_pciex_master()
  - e1000_hw.c: e1000_ife_disable_dynamic_power_down()
  - e1000_hw.c: e1000_ife_enable_dynamic_power_down()
  - e1000_hw.c: e1000_write_ich8_word()
  - e1000_hw.c: e1000_duplex_reversal()
  - e1000_main.c: e1000_io_read()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: John Ronciak <john.ronciak@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:28 -04:00
Andrew Morton
3418e469eb [PATCH] sundance section fix
drivers/net/sundance.c:110: error: version causes a section type conflict

I don't understand this error.  It's referred to from both __init and
__devinit code.  With CONFIG_HOTPLUG=n, version[] is placed in .init.data and
is referred to from .init.text.

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:28 -04:00
Andrew Morton
90d5aed2d9 [PATCH] fealnx section fix
With CONFIG_HOTPLUG=n it won't compile:

distcc[25607] ERROR: compile drivers/net/fealnx.c on g5/64 failed

version[] is referred to from both __init code and from __devinit code, so
move it out of __init altogether.

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:28 -04:00
Andrew Morton
c9d26c9785 [PATCH] winbond-840 section fix
With CONFIG_HOTPLUG=n it won't compile:

drivers/net/tulip/winbond-840.c:141: error: version causes a section type conflict

(For some reason it gets the same error if marked __initdata.  Give up.)

Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:44:28 -04:00
Andrew Morton
c971ef46cb [PATCH] seeq8005 section fix
WARNING: drivers/net/seeq8005.o - Section mismatch: reference to .init.text:seeq8005_probe from .text between 'init_module' (at offset 0x106) and 'seeq8005_open'

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:17 -04:00
Andrew Morton
1e13b0d82d [PATCH] ni65 section fix
WARNING: drivers/net/ni65.o - Section mismatch: reference to .init.text:ni65_probe from .text between 'init_module' (at offset 0x54a) and 'ni65_stop_start'

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:17 -04:00
Andrew Morton
5e5fa01d55 [PATCH] wd section fix
WARNING: drivers/net/wd.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0xfd) and 'wd_open'
WARNING: drivers/net/wd.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x14b) and 'wd_open'
WARNING: drivers/net/wd.o - Section mismatch: reference to .init.data:wd_portlist from .text between 'init_module' (at offset 0x17f) and 'wd_open'

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:17 -04:00
Andrew Morton
daca7cd761 [PATCH] smctr section fix
WARNING: drivers/net/tokenring/smctr.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x2ba0) and 'smctr_reset_adapter'
WARNING: drivers/net/tokenring/smctr.o - Section mismatch: reference to .init.text:smctr_probe from .text between 'init_module' (at offset 0x2bf4) and 'smctr_reset_adapter'

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:16 -04:00
Andrew Morton
6d2cdb4fd1 [PATCH] ibmtr section fix
WARNING: drivers/net/tokenring/ibmtr.o - Section mismatch: reference to .init.data:ibmtr_mem_base from .text between 'ibmtr_probe1' (at offset 0x6e6) and 'ibmtr_probe_card'
WARNING: drivers/net/tokenring/ibmtr.o - Section mismatch: reference to .init.data:ibmtr_mem_base from .text between 'ibmtr_probe1' (at offset 0x74a) and 'ibmtr_probe_card'
WARNING: drivers/net/tokenring/ibmtr.o - Section mismatch: reference to .init.data:ibmtr_mem_base from .text between 'ibmtr_probe1' (at offset 0x7fd) and 'ibmtr_probe_card'

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:16 -04:00
Andrew Morton
19a8664d8a [PATCH] ni52 section fix
WARNING: drivers/net/ni52.o - Section mismatch: reference to .init.text:ni52_probe from .text between 'init_module' (at offset 0x997) and 'ni52_close'
WARNING: drivers/net/ni65.o - Section mismatch: reference to .init.text:ni65_probe from .text between 'init_module' (at offset 0x54a) and 'ni65_stop_start'

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:16 -04:00
Andrew Morton
dab3d02ec0 [PATCH] lne390 section fix
WARNING: drivers/net/lne390.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x100) and 'lne390_close'

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:16 -04:00
Andrew Morton
3805f0e28c [PATCH] lance section fix
WARNING: drivers/net/lance.o - Section mismatch: reference to .init.data:lance_portlist from .text between 'init_module' (at offset 0x8d3) and 'lance_purge_ring'
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:16 -04:00
Andrew Morton
58f149fc65 [PATCH] eth16i section fix
WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.data:cardname from .text between 'init_module' (at offset 0x6d2) and 'eth16i_multicast'
WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x6ef) and 'eth16i_multicast'
WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x702) and 'eth16i_multicast'
WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.data:cardname from .text between 'init_module' (at offset 0x70e) and 'eth16i_multicast'
WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x71d) and 'eth16i_multicast'
WARNING: drivers/net/eth16i.o - Section mismatch: reference to .init.data:cardname from .text between 'init_module' (at offset 0x729) and 'eth16i_multicast'

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:16 -04:00
Andrew Morton
5757f5c6d7 [PATCH] es3210 section fix
WARNING: drivers/net/es3210.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0xdf) and 'es_close'
WARNING: drivers/net/es3210.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x100) and 'es_close'

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:16 -04:00
Andrew Morton
b1176b95b4 [PATCH] eexpress section fix
WARNING: drivers/net/eexpress.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x6c3) and 'eexp_hw_lasttxstat'
WARNING: drivers/net/eexpress.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x74f) and 'eexp_hw_lasttxstat'

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:15 -04:00
Andrew Morton
02a3245fcf [PATCH] eepro section fix
WARNING: drivers/net/eepro.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x284) and 'eepro_ethtool_get_drvinfo'
WARNING: drivers/net/eepro.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x2a7) and 'eepro_ethtool_get_drvinfo'
WARNING: drivers/net/eepro.o - Section mismatch: reference to .init.data:eepro_portlist from .text between 'init_module' (at offset 0x2b3) and 'eepro_ethtool_get_drvinfo'

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:15 -04:00
Andrew Morton
d543cbb6d1 [PATCH] e2100 section fix
WARNING: drivers/net/e2100.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0xd9) and 'e21_reset_8390'

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:15 -04:00
Andrew Morton
5d930108c9 [PATCH] at1700 section fix
WARNING: drivers/net/at1700.o - Section mismatch: reference to .init.text:at1700_probe from .text between 'init_module' (at offset 0x75) and 'net_get_stats'

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:15 -04:00
Andrew Morton
e26c129a49 [PATCH] cs89x0 section fix
WARNING: drivers/net/cs89x0.o - Section mismatch: reference to .init.data:version from .text between 'init_module' (at offset 0x13d8) and 'net_get_stats'
WARNING: drivers/net/cs89x0.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x1634) and 'net_get_stats'
WARNING: drivers/net/cs89x0.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x1a1f) and 'net_get_stats'

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:15 -04:00
Andrew Morton
5f3bc456ce [PATCH] cops section fix
WARNING: drivers/net/appletalk/cops.o - Section mismatch: reference to .init.text:cops_probe from .text between 'init_module' (at offset 0xae) and 'cops_rx'

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:15 -04:00
Andrew Morton
62a87b8051 [PATCH] ac3200 section fixes
WARNING: drivers/net/ac3200.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0xf9) and 'ac_close_card'

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:15 -04:00
Andrew Morton
864fe05dfa [PATCH] 82596 section fixes
WARNING: drivers/net/82596.o - Section mismatch: reference to .init.text:i82596_probe from .text between 'init_module' (at offset 0x141) and 'i596_add_cmd'

Also nail a couple of crazy inlines.

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:40:15 -04:00
Jeff Garzik
49666145de Merge branch 'upstream-fixes' into upstream 2006-08-19 17:25:47 -04:00
Jeff Garzik
41ace1861a Merge branch 'master' into upstream-fixes 2006-08-19 17:25:34 -04:00
Panagiotis Issaris
d4274b51a5 [PPP]: handle kmalloc failures and convert to using kzalloc
The PPP code contains two kmalloc()s followed by memset()s without
handling a possible memory allocation failure.  (Suggested by Joe
Perches).

And furthermore, conversions from kmalloc+memset to kzalloc.

[akpm@osdl.org: fix error-path leak]
[akpm@osdl.org: cleanups]
[paulus@samba.org: don't add useless printk and cardmap_destroy calls]

Signed-off-by: Panagiotis Issaris <takis@issaris.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17 16:29:55 -07:00
Michael Chan
932f3772cf [BNX2]: Convert to netdev_alloc_skb()
Convert dev_alloc_skb() to netdev_alloc_skb() and increase default
rx ring size to 255. The old ring size of 100 was too small.

Update version to 1.4.44.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17 16:29:52 -07:00
Michael Chan
2f8af120a1 [BNX2]: Fix tx race condition.
Fix a subtle race condition between bnx2_start_xmit() and bnx2_tx_int()
similar to the one in tg3 discovered by Herbert Xu:

CPU0					CPU1
bnx2_start_xmit()
	if (tx_ring_full) {
		tx_lock
					bnx2_tx()
						if (!netif_queue_stopped)
		netif_stop_queue()
		if (!tx_ring_full)
						update_tx_ring
			netif_wake_queue()
		tx_unlock
	}

Even though tx_ring is updated before the if statement in bnx2_tx_int() in
program order, it can be re-ordered by the CPU as shown above.  This
scenario can cause the tx queue to be stopped forever if bnx2_tx_int() has
just freed up the entire tx_ring.  The possibility of this happening
should be very rare though.

The following changes are made, very much identical to the tg3 fix:

1. Add memory barrier to fix the above race condition.

2. Eliminate the private tx_lock altogether and rely solely on
netif_tx_lock.  This eliminates one spinlock in bnx2_start_xmit()
when the ring is full.

3. Because of 2, use netif_tx_lock in bnx2_tx_int() before calling
netif_wake_queue().

4. Add memory barrier to bnx2_tx_avail().

5. Add bp->tx_wake_thresh which is set to half the tx ring size.

6. Check for the full wake queue condition before getting
netif_tx_lock in tg3_tx().  This reduces the number of unnecessary
spinlocks when the tx ring is full in a steady-state condition.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-17 16:29:51 -07:00
Auke Kok
891b11f619 ixgb: Increment version to 1.0.109-k4
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-16 13:47:31 -07:00
Jesse Brandeburg
3ae84d9269 ixgb: fix cache miss due to miscalculation
Reduce writeback threshold by 1. We were instructing the hardware to
wait until the 17th descriptor which went over the cache line limit.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke.jan.h.kok@intel.com>
2006-08-16 13:47:25 -07:00
Manasi Deval
0fe198a5e1 ixgb: Add CX4 PHY type detection and subdevice ID.
Signed-off-by: Manasi Deval <manasi.deval@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-16 13:47:20 -07:00
Auke Kok
dc335d9735 e1000: Increment driver version to 7.1.9-k6
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-16 13:39:09 -07:00
Jeff Kirsher
600c977c08 e1000: Disable aggressive clocking on esb2 with SERDES port
Disable aggressive clocking on esb2 with SERDES port as it causes
hardware problems.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-16 13:39:04 -07:00
Jeff Kirsher
7820d4281a e1000: Force full DMA clocking for 10/100 speed
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-16 13:39:00 -07:00
Jeff Kirsher
c9c1b834c7 e1000: Allow NVM to setup LPLU for IGP2 and IGP3
Allow NVM to setup LPLU for IGP2 and IGP3. Only IGP needs LPLU D3
disabled during init here.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-16 13:38:54 -07:00
Jesse Brandeburg
1a821ca595 e1000: explicit locking for two ethtool path functions
Explicitly lock two more ethtool entry points completely instead
of the hardware reset only to prevent a race condition.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-16 13:38:46 -07:00
Jesse Brandeburg
d658266ed6 e1000: Explicitly power up the PHY during loopback testing.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-16 13:31:33 -07:00
Jeff Kirsher
673a052fde e1000: Remove 0x1000 as supported device
Remove pci ID 8086:1000 from the list fo supported devices. This device
has not functioned with the driver for very long (since v. 5.2.4!)
and we lack the resources to come with a substantial fix. There are only
few cards of this type out there.

Signed-off-by: Jeff Kirsher <Jeffrey.t.kirsher@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-16 11:28:49 -07:00
Auke Kok
e15fdd0391 e1000: Same cosmetic fix as earlier sent out for IPV4.
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-16 11:28:45 -07:00
Auke Kok
4e1dc97d5e e100: increment version to 3.5.10-k4
Increment the version of e100 to 3.5.10-k4, increment dates.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-16 11:28:35 -07:00
Jeff Kirsher
60ffa47875 e100: Fix MDIO/MDIO-X
MDIO/MDIO-X was broken due to a wrong errata. Removing the workaround
code fixes for affected NICs.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-16 11:28:14 -07:00
Michael Wu
113b898e38 [PATCH] ray_cs: Remove dependency on ieee80211
This patch removes the dependency on ieee80211.h from
the ray_cs driver. ray_cs only needs iw_handler.h.

Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14 15:43:23 -04:00
Ulrich Kunitz
c48cf12514 [PATCH] zd1211rw: cleanups
Add static to 2 internal functions. Thanks goes to Adrian Bunk, who found that.

Also made some modifications to the clear functions:

After a discussion on the mailing list, I implemented this code to
have on the one hand sufficient test in debug mode, but on the
other hand reduce the overhead for structure clearing to a
minimum.

A new macro ZD_MEMCLEAR is introduced, which produces code if
DEBUG is set. Locks are not set anymore for structure clearing,
but in debug mode, there is a verification, that the locks have
not been set.

Finally, removed a misleading comment regarding locking in the disconnect
path.

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14 15:43:23 -04:00
Ulrich Kunitz
943599ee2c [PATCH] zd1211rw: USB id 1582:6003 for Longshine 8131G3 added
The Longshine device is a ZD1211B and has a AL2230 RF. I tested it
successfully with no encryption and WEP.

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14 15:43:23 -04:00
Daniel Drake
a1030e92c1 [PATCH] zd1211rw: Convert installer CDROM device into WLAN device
Some devices identify themselves as a virtual USB CDROM drive. The virtual CD
includes the windows driver. We aren't interested in this, so we eject the
virtual CDROM and then the real wireless device appears.

Patch fixed over the earlier version to not leak cmd, thanks to Michael Buesch
for spotting that.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14 15:43:23 -04:00
Daniel Drake
4ceb7e9936 [PATCH] zd1211rw: Add ID for ZyXEL G220F
zd1211 chip 0586:3402 v4916 high 00-13-49 AL2230_RF pa0 ----

This device pops up after the virtual driver CD has been ejected.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14 15:43:22 -04:00
Daniel Drake
d066c2190d [PATCH] zd1211rw: Firmware version vs bootcode version mismatch handling
This is needed for my G220F, otherwise it fails to initialize after the
existing firmware upload routine.

The vendor driver actually does more than what I have done here: it
downloads the firmware + boot code, modifies it, and uploads it again
(really messy). I have not copied that part over, as my device can get
on its feet without it.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14 15:43:22 -04:00
Daniel Drake
12f3930897 [PATCH] zd1211rw: Add ID for Allnet ALLSPOT Hotspot finder
Tested by Wonka on IRC.

zd1211 chip 157e:3204 v4810 high 00-11-e0 AL7230B_RF pa0 g---

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14 15:43:22 -04:00
Daniel Drake
1b865491fc [PATCH] zd1211rw: Add ID for Senao NUB-8301
Tested by lyakh on IRC

zd1211 chip 1740:2000 v4721 high 00-02-6f AL7230B_RF pa0 g---

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14 15:43:22 -04:00
Daniel Drake
ec62bd91bb [PATCH] zd1211rw: Support AL7230B RF
This patch adds support for another Airoha RF which is present in some
ZD1211 adapters. This RF supports 802.11a as well as 802.11b/g, but 802.11a
connectivity is not yet supported by this driver.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14 15:43:21 -04:00
Daniel Drake
20fe2176e5 [PATCH] zd1211rw: AL2230 ZD1211B vendor sync
This patch synchronizes our code to some recent vendor driver modifications.
A new PHY layout is supported, some values are tweaked, and the AL2230 is now
programmed over a new interface which is many times faster.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14 15:43:21 -04:00
Daniel Drake
98227a90a7 [PATCH] zd1211rw: Match vendor driver IFS values
The vendor driver resets the IFS value every time the channel changes,
to this one.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14 15:43:21 -04:00
Daniel Drake
fe7215caa0 [PATCH] zd1211rw: ZD1211B ASIC/FWT, not jointly decoder
The vendor driver chooses this value based on an ifndef ASIC,
and ASIC is never defined.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14 15:43:21 -04:00
John W. Linville
e9ffb3d7ec Merge branch 'from-linus' into upstream 2006-08-14 15:33:54 -04:00
Dave Jones
bcd6837387 [PATCH] remove unnecessary config.h includes from drivers/net/
config.h is automatically included by kbuild these days.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-14 14:00:43 -04:00
Jeff Garzik
0c913bdf3e Merge branch 'upstream-fixes' into upstream 2006-08-14 13:59:38 -04:00
Daniele Venzano
80a8003f92 [PATCH] Add new PHY to sis900 supported list
Please include the attached patch that adds support for a new PHY to the
sis900 driver. See also Bugzilla 6919.

Signed-off-by: Daniele Venzano <venza@brownhat.org>

--
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-14 13:59:31 -04:00
Lennert Buytenhek
09e590e5d5 [PATCH] smc91x: disable DMA mode on the logicpd pxa270
Enabling PXA DMA for the smc91x on the logicpd pxa270 produces
unacceptable interference with the TFT panel, so disable it.  Also
delete the lpd270 versions of the SMC_{in,out}[bl]() macros, as they
aren't used, since the board only supports 16bit accesses.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-14 13:58:58 -04:00
Jeff Garzik
f5c7db1c91 Merge branch 'upstream-fixes' into upstream 2006-08-10 08:31:03 -04:00
Stephen Hemminger
8d3d35b4e2 [PATCH] sky2: phy power problems on 88e805X chips
On the 88E805X chipsets (used in laptops), the PHY was not getting powered
out of shutdown properly. The variable reg1 was getting reused incorrectly.
This is probably the cause of the bug.
	http://bugzilla.kernel.org/show_bug.cgi?id=6471

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10 08:30:48 -04:00
Greg Kroah-Hartman
a465714109 Merge gregkh@master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2006-08-09 11:49:13 -07:00
Brice Goglin
013b68bf7c [PATCH] myri10ge: always re-enable dummy rdmas in myri10ge_resume
Dummy RDMA are always enabled on device startup since commit
9a71db721a (to work around buggy
PCIe chipsets which do not implement resending properly). But,
we also need to always re-enable them when resuming the device.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-09 00:12:47 -04:00
Philippe De Muyter
e714d99cac [PATCH] sundance: small cleanup
This patch uses the sundance_reset function everywhere a reset is done,
and adds a link to the archives of the original mailing list.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-09 00:02:46 -04:00
Stephen Hemminger
e27cdba53b [PATCH] forcdeth: revised NAPI support
Revised version of the forcedeth NAPI support.
This version is based against netdev-2.6#upstream
(after the MAC patches from Ayaz today).

Can't use nv_disable_hw_interrupts because NAPI only wants to
mask off receive irq's and leave the others alone.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-08 23:47:59 -04:00
Ayaz Abdulla
5070d34084 [PATCH] forcedeth: mac address corrected
This patch will correct the mac address and set a flag to indicate that
it is already corrected in case nv_probe is called again. For example,
when you use kexec to restart the kernel.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-08 23:47:30 -04:00
Ayaz Abdulla
f1489653e9 [PATCH] forcedeth: move mac address setup/teardown
This patch moves the mac address setup/teardown to the
nv_probe/nv_remove functions. This fixes WOL wakeup since on nv_close we
would reverse the mac address. Also, bonding driver will reset address
after nv_close is called.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-08 23:47:30 -04:00
Komuro
fcf194d19b [PATCH] network: pcnet_cs.c: remove unnecessary 'mdio_reset'
'mdio_reset' has bad side effects that moves the phy_id.
DL10022-based cards work properly without 'mdio_reset'.

 Signed-off-by: komurojun-mbn@nifty.com

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-08 23:38:29 -04:00
Paul Mackerras
32bc6e095d Merge branch 'merge' 2006-08-08 17:09:11 +10:00
Michael Chan
1b2a720506 [TG3]: Fix tx race condition
Fix a subtle race condition between tg3_start_xmit() and tg3_tx()
discovered by Herbert Xu <herbert@gondor.apana.org.au>:

CPU0					CPU1
tg3_start_xmit()
	if (tx_ring_full) {
		tx_lock
					tg3_tx()
						if (!netif_queue_stopped)
		netif_stop_queue()
		if (!tx_ring_full)
						update_tx_ring 
			netif_wake_queue()
		tx_unlock
	}

Even though tx_ring is updated before the if statement in tg3_tx() in
program order, it can be re-ordered by the CPU as shown above.  This
scenario can cause the tx queue to be stopped forever if tg3_tx() has
just freed up the entire tx_ring.  The possibility of this happening
should be very rare though.

The following changes are made:

1. Add memory barrier to fix the above race condition.

2. Eliminate the private tx_lock altogether and rely solely on
netif_tx_lock.  This eliminates one spinlock in tg3_start_xmit()
when the ring is full.

3. Because of 2, use netif_tx_lock in tg3_tx() before calling
netif_wake_queue().

4. Change TX_BUFFS_AVAIL to an inline function with a memory barrier.
Herbert and David suggested using the memory barrier instead of
volatile.

5. Check for the full wake queue condition before getting
netif_tx_lock in tg3_tx().  This reduces the number of unnecessary
spinlocks when the tx ring is full in a steady-state condition.

6. Update version to 3.65.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-07 21:46:02 -07:00
Christoph Hellwig
d14cc9a342 [TG3]: skb->dev assignment is done by netdev_alloc_skb
All caller of netdev_alloc_skb need to assign skb->dev shortly
afterwards.  Move it into common code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-07 16:11:48 -07:00
John W. Linville
71bfe47f02 Merge branch 'from-linus' into upstream 2006-08-04 14:24:15 -04:00
Stephen Hemminger
fe2a24dfc5 [PATCH] sky2: status interrupt handling improvement
More changes to prevent losing status and causing hangs.
The hardware is smarter than I gave it credit for.
Clearing the status IRQ causes the status state machine to
toggle an IRQ if needed and post any more transmits.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03 17:36:39 -04:00
Jeff Garzik
834695ee41 Merge branch 'upstream-fixes' into upstream 2006-08-03 17:33:27 -04:00
Stephen Hemminger
57fa442c1e [PATCH] sky2: more pci device ids
Recent vendor driver and customer reports show more devices.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03 17:31:56 -04:00
Brice Goglin
c54772e751 [PATCH] myri10ge - Fix spurious invokations of the watchdog reset handler
Fix spurious invocations of the watchdog reset handler.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03 17:31:10 -04:00
Brice Goglin
e454358ace [PATCH] myri10ge - Write the firmware in 256-bytes chunks
When writing the firmware to the NIC, the FIFO is 256-bytes long,
so we use 256-bytes chunks and a read to wait until the previous
write is done.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03 17:31:10 -04:00
Sergei Shtylylov
817acf5ebd [PATCH] Stop calling phy_stop_interrupts() twice
Prevent phylib from freeing PHY IRQ twice on closing an eth device:
phy_disconnect() first calls phy_stop_interrupts(), then it calls
phy_stop_machine() which in turn calls phy_stop_interrupts() making the
kernel complain on each bootup...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03 17:29:59 -04:00
Jeff Garzik
534abebaf7 Merge branch 'upstream-fixes' into upstream 2006-08-03 17:28:34 -04:00
Ananda Raju
75c30b1368 [PATCH] s2io driver bug fixes #2
This patch contains some of the bug fixes and enhancements done to
	s2io driver. Following are the brief description of changes

	1. code cleanup to handle gso modification better
	2. Move repeated code in rx path, to a common function
	   s2io_chk_rx_buffers()
	3. Bug fix in MSI interrupt
	4. clear statistics when card is down
	5. Avoid linked list traversing in lro aggregation.
	6. Use pci_dma_sync_single_for_cpu for buffer0 in case of 2/3
	   buffer mode.
	7. ethtool tso get/set functions to set clear NETIF_F_TSO6
	8. Stop LRO aggregation when we receive ECN notification

Signed-off-by: Ananda Raju <ananda.raju@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03 17:27:26 -04:00
Ananda Raju
b41477f32a [PATCH] s2io driver bug fixes #1
This patch contains some of the bug fixes and enhancements done to
	s2io driver. Following are the brief description of changes

	1. Introduced macro "S2IO_PARM_INT" for declaring integer load parameter
	2. UDP_RR test failure, memset txdl after Tx completion
	3. PXE boot may leave adapter in unknown state so do reset in probe.
	4. Add Tx completion code in netpoll
	5. In s2io_vpd_read() move array vpd_data[] to pointer, saves stack memory
	6. Fix bug in ethtool online test

Signed-off-by: Ananda Raju <ananda.raju@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-03 17:27:25 -04:00
Jeff Garzik
fd39c68892 Merge branch 'bcm43xx' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream 2006-08-03 17:20:58 -04:00
Jeff Garzik
23946a8a98 Merge branch 'upstream-fixes' into upstream 2006-08-03 17:20:37 -04:00
Jeff Garzik
2b14c30b46 Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes 2006-08-03 17:19:44 -04:00
David S. Miller
87f5032e0c [E1000]: Convert to netdev_alloc_skb
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-02 13:38:27 -07:00
David S. Miller
a20e9c6291 [TG3]: Convert to netdev_alloc_skb
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-02 13:38:26 -07:00
David S. Miller
9cac2c35e2 [ATALK]: Make CONFIG_DEV_APPLETALK a tristate.
Otherwise we allow building appletalk drivers in-kernel when
CONFIG_ATALK is modular.  That doesn't work because these drivers use
symbols such as "alloc_talkdev" which is exported from code built
by CONFIG_ATALK.

Noticed by Toralf Förster.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-02 13:38:17 -07:00
John W. Linville
73c1ac1e3b Merge branch 'upstream' into bcm43xx 2006-08-02 14:31:12 -04:00
John W. Linville
4456403f5e Merge branch 'upstream-fixes' into upstream 2006-08-02 14:29:40 -04:00
Ulrich Kunitz
fde627b54c [PATCH] zd1211rw: Packet filter fix for managed (STA) mode
I had problems with my AVM Fritz!Box access point. It appeared
that the AP deauthorized me and the softmac didn't reconnect me.
This patch handles the problem.

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-02 14:26:51 -04:00
Ulrich Kunitz
b269825b9b [PATCH] zd1211rw: Fixed endianess issue with length info tag detection
Discovered a problem while accessing www.python.org on my PPC32.
The problem was pretty consistent for all sticks. The reason was
that while testing for the length info tag, I ignored the
endianess of the host system.

Please recognize that converting the constant to little endian, we
create faster code.

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-02 14:26:51 -04:00
Daniel Drake
b1162b639c [PATCH] zd1211rw: Remove bogus assert
This function is never called in interrupt context, and it doesn't
matter if it is called in IRQ context or not.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-02 14:26:50 -04:00
Daniel Drake
40da08bca6 [PATCH] zd1211rw: Fix software encryption/decryption
Apparently the ZD1211 doesn't mind, but the ZD1211B absolutely must be
told that encryption is happening in software.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-02 14:26:50 -04:00
Daniel Drake
71eae25ece [PATCH] zd1211rw: Pass more management frame types up to host
We'll be needing these at some point...

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-02 14:26:50 -04:00
Ulrich Kunitz
99f65f25c1 [PATCH] zd1211rw: Fixes radiotap header
There has been a problem in the radiotap header. Monitor mode
works now with tcpdump 3.94 + libpcap 0.9.4. ethereal 0.99.0 +
libpcap 0.9.4 is broken, because it doesn't find the right offset
for the IEEE 802.11 header.

Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-02 14:26:50 -04:00
John W. Linville
02b311bce9 Merge branch 'from-linus' into upstream 2006-08-02 14:15:39 -04:00
John W. Linville
ebf572b448 Merge branch 'from-linus' into bcm43xx 2006-08-02 14:15:21 -04:00
Anton Blanchard
b9377ffc3a [POWERPC] clean up pseries hcall interfaces
Our pseries hcall interfaces are out of control:

	plpar_hcall_norets
	plpar_hcall
	plpar_hcall_8arg_2ret
	plpar_hcall_4out
	plpar_hcall_7arg_7ret
	plpar_hcall_9arg_9ret

Create 3 interfaces to cover all cases:

	plpar_hcall_norets:	7 arguments no returns
	plpar_hcall:		6 arguments 4 returns
	plpar_hcall9:		9 arguments 9 returns

There are only 2 cases in the kernel that need plpar_hcall9, hopefully
we can keep it that way.

Pass in a buffer to stash return parameters so we avoid the &dummy1,
&dummy2 madness.

Signed-off-by: Anton Blanchard <anton@samba.org>
--
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-01 16:19:15 +10:00
Paul Mackerras
57cad8084e Merge branch 'merge' 2006-08-01 10:37:25 +10:00
John W. Linville
48c86da1a2 [PATCH] bcm43xx: reduce mac_suspend delay loop count
Drop the mac_suspend loop count to reduce the maximum delay to 10ms.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-31 14:58:18 -04:00
Larry Finger
894b62748b [PATCH] bcm43xx: add missing mac_suspended initialization
Fix-up missing mac_suspended initialization which resulted from
Linville's sloppy patch mangling.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-31 14:21:56 -04:00
Mike Kravetz
cb18bd4003 [POWERPC] Instrument Hypervisor Calls: merge headers
Move all the Hypervisor call definitions to to a single header file.

Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-31 15:56:35 +10:00
Jeremy Kerr
1a2509c946 [POWERPC] netdevices: Constify & voidify get_property()
Now that get_property() returns a void *, there's no need to cast its
return value. Also, treat the return value as const, so we can
constify get_property later.

powerpc-specific network device driver changes.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-31 15:55:05 +10:00
Henrik Kretzschmar
e1c3e50140 [PATCH] initialisation cleanup for ULI526x-net-driver
removes the unneeded local variable rc
replace pci_module_init() with pci_register_driver()
two coding style issues on switch

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-29 01:31:33 -04:00
Stephen Hemminger
a8bed49ecf [PATCH] forcedeth: le32 annotation
Use __le32 to indicate byte order of hardware ring elements

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>

 drivers/net/forcedeth.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-29 01:29:30 -04:00
Stephen Hemminger
f82a9352f6 [PATCH] forcedeth: coding style cleanups
Fix the coding style of the nForce Ethernet driver.
 - typedef's should not be used
 - variable names should not be capitialized
 - structure tags should be lower case
 - add whitespace near keywords
 - don't add paren's to switch cases
 - remove paren's from return
 - don't use __constant_ntohs unless necessary.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>

 drivers/net/forcedeth.c |  246 ++++++++++++++++++++++++------------------------
 1 file changed, 123 insertions(+), 123 deletions(-)
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-29 01:29:30 -04:00
Jeff Garzik
053dd21789 Merge branch 'upstream-fixes' into upstream 2006-07-29 01:29:27 -04:00
Jeff Garzik
4da3dcf346 Merge branch 'upstream' of git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into upstream-fixes 2006-07-29 01:26:51 -04:00
Jeff Garzik
d7446c0b52 Merge branch 'upstream-fixes' into upstream 2006-07-29 01:24:00 -04:00
Stephen Hemminger
187ff3b857 [PATCH] skge: chip clock rate typo
Okay, Fix both typo's in one patch .The impact is that the incorrect value
was being computed for blinking LED and interrupt moderation values.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-29 01:23:51 -04:00
Brice Goglin
9a71db721a [PATCH] myri10ge - Always do a dummy RDMA after loading the firmware
Always do a dummy RDMA after loading the firmware to work around
buggy PCIe chipsets which do not implement resending properly.
This is so cheap as to be almost free, and should never have been
conditional on the tx boundary != 4096.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-29 01:23:51 -04:00
Jeff Garzik
7d2d8259a2 Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream 2006-07-29 00:33:35 -04:00
Jeff Garzik
a47e920948 Merge branch 'upstream-fixes' into upstream 2006-07-29 00:32:42 -04:00
Jeff Garzik
5b84b6fa9b Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes 2006-07-29 00:32:29 -04:00
Ron Mercer
5a4faa8737 [PATCH] qla3xxx NIC driver
This is a complementary network driver for our ISP4XXX parts.

There is a concurrent effort underway to get the iSCSI driver (qla4xxx)
integrated upstream as well.

I have been through several iterations with the linux-netdev list and have had
much response from Stephen Hemminger.

- Built and tested using kernel 2.6.17-rc4.

- The chip supports two ethernet and two iSCSI functions.

- The functions ql_sem_lock, ql_sem_spinlock, ql_sem_unlock, and
  ql_wait_for_drvr_lock are used to protect resources that are shared across
  the network and iSCSI functions.  This protection is mostly during chip
  initialization and resets, but also include link management.

- The PHY/MII are not exported through ethtool due to the fact that the
  iSCSI function will control the common link at least 50% of the time.

This driver has been through several iterations on the netdev list and we feel
this driver is ready for inclusion in the upstream kernel.

It has been built and tested on x86 and PPC64 platforms.

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-29 00:28:51 -04:00
Jeff Garzik
572e432e01 Merge branch 'master' into upstream 2006-07-29 00:28:36 -04:00
Alexey Dobriyan
93853fd0d4 [SUNLANCE]: fix compilation on sparc-UP
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-28 01:09:40 -07:00
John W. Linville
f1207ba1a7 [PATCH] bcm43xx: fix-up build breakage from merging patches out of order
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 18:24:54 -04:00
Larry Finger
27be44ff8e [PATCH] bcm43xx: improved statistics
This minor patch for wireless-2.6 (softmac) adjusts the parameters of
the wireless statistics to improve the display of programs such as the
"Wireless Network Information" applet of KDE. Thanks to Dan Williams
and Jean Tourrilhes for valuable help in setting up the return of
info in dBm.

Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 18:19:25 -04:00
Michael Buesch
58e5528ee4 [PATCH] bcm43xx: init routine rewrite
Rewrite of the bcm43xx initialization routines.
This fixes several issues:
* up-down-up-down-up... stale data issue
  (May fix some DHCP issues)
* Fix the init vs IRQ handler race (and remove the workaround)
* Fix init for cards with multiple cores (APHY)
  As softmac has no internal PHY handling (unlike dscape),
  this adds the file "phymode" to sysfs.
  The active PHY can be selected by writing either a, b or g
  to this file. Current PHY can be determined by reading from it.
* Fix the controller restart code.
  Controller restart can now also be triggered through
  echo 1 > /debug/bcm43xx/ethX/restart

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 18:19:18 -04:00
Michael Buesch
3234faa8ab [PATCH] bcm43xx: fix mac_suspend refcount
This fixes mac_suspend reference counting for
ifconfig up
ifconfig down
ifconfig up

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 18:19:14 -04:00
Michael Buesch
b8e7cdb391 [PATCH] bcm43xx: lower mac_suspend udelay
Microoptimization:
This reduces the udelay in bcm43xx_mac_suspend.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 18:19:10 -04:00
Michael Buesch
062caf43d8 [PATCH] bcm43xx: suspend MAC while executing long pwork
Suspend MAC (and make MAC-suspend refcounting) when doing
long periodic work.
On long periodic work, we disable IRQs on the device, so
we don't want the MAC to stay operating and probably miss
packets due do non-delivery of interrupts.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 18:19:02 -04:00
Dan Williams
eab411f1e8 [PATCH] prism54: update to WE-19 for WPA support
Add WE-19 capabilities to prism54 fullmac driver so that it supports the
necessary Wireless Extensions WPA calls.  Convert reporting of WPA/RSN
Generic Information Elements to IWEVGENIE rather than pre-WE-19
IWEVCUSTOM as well.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 16:17:27 -04:00
Daniel Drake
089f99d8ac [PATCH] zd1211rw: Implement SIOCGIWNICKN
wireless.h discourages using SIOCGIWNAME to publish the driver name
which the interface belongs to. Use SIOCGIWNICKN instead.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 16:17:27 -04:00
Pavel Machek
67fd6b4523 [PATCH] cleanup // comments from ipw2200
ipw2200 uses // comments, and uses them for removing unneeded
code. Clean it up a bit.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 16:17:26 -04:00
Robert Schulze
13dca9b87e [PATCH] airo: collapse debugging-messages in issuecommand to one line
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 16:17:26 -04:00
John W. Linville
416512cb75 Merge branch 'upstream-fixes' into upstream 2006-07-27 15:06:13 -04:00
Dan Williams
fe397d469f [PATCH] orinoco: fix setting transmit key only
When determining whether there's a key to set or not, orinoco should be
looking at the key length, not the key data.  Otherwise confusion reigns
when trying to set TX key only, passing in zero-length key, but non-NULL
pointer.  Key length takes precedence over non-NULL key data.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 14:37:31 -04:00
Daniel Drake
345f6b8beb [PATCH] softmac: do shared key auth in workqueue
Johann Uhrmann reported a bcm43xx crash and Michael Buesch tracked
it down to a problem with the new shared key auth code (recursive
calls into the driver)

This patch (effectively Michael's patch with a couple of small
modifications) solves the problem by sending the authentication
challenge response frame from a workqueue entry.

I also removed a lone \n from the bcm43xx messages relating to
authentication mode - this small change was previously discussed but
not patched in.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 14:37:30 -04:00
Robert Schulze
8fa9ea18e8 [PATCH] airo: should select crypto_aes
The driver airo (for Cisco Wlan-Cards) complains about "failed to load
transform for AES", when it is loaded and CRYPTO_AES is not selected
in Kconfig.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 14:37:30 -04:00
Pavel Machek
d91928e906 [PATCH] zd1201: workaround interference problem
zd1201 has nasty tendency to emit magicall anti-wifi cloud when it is
inserted into slot, but not used.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 14:37:30 -04:00
John W. Linville
20f99dcf41 Merge branch 'from-linus' into upstream 2006-07-27 14:27:06 -04:00
Francois Romieu
bcf0bf90cd r8169: sync with vendor's driver
- add several PCI ID for the PCI-E adapters ;
- new identification strings ;
- the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the
  out-of-tree driver. It makes the comparison less hairy ;
- various magic ;
- the PCI region for the device with PCI ID 0x8136 is guessed.
  Explanation: the in-kernel Linux driver is written to allow MM register
  accesses and avoid the IO tax. The relevant BAR register was found at
  base address 1 for the plain-old PCI 8169. User reported lspci show that
  it is found at base address 2 for the new Gigabit PCI-E 816{8/9}.
  Typically:
  01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01)
          Subsystem: Unknown device 1631:e015
          Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
          Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
          Latency: 0, cache line size 20
          Interrupt: pin A routed to IRQ 16
          Region 0: I/O ports at b800 [size=256]
          Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K]
          ^^^^^^^^
  So far I have not received any lspci report for the 0x8136 and
  Realtek's driver do not help: be it under BSD or Linux, their r1000 driver
  include a USE_IO_SPACE #define but the bar address is always hardcoded
  to 1 in the MM case. :o/
- the 8168 has been reported to require an extra alignment for its receive
  buffers. The status of the 8167 and 8136 is not known in this regard.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-26 23:23:15 +02:00
Francois Romieu
4ff96fa673 r8169: remove rtl8169_init_board
Rationale:
- its signature is not exactly pretty;
- it has no knowledge of pci_device_id;
- kiss 23 lines good bye.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-26 23:23:14 +02:00
Francois Romieu
623a1593c8 r8169: hardware flow control
The datasheet suggests that the device handles the hardware flow
control almost automagically. User report a different story, so
let's try to twiddle the mii registers.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-26 23:23:13 +02:00