Commit Graph

158 Commits

Author SHA1 Message Date
Jens Axboe
0f78ab9899 Revert "Seperate read and write statistics of in_flight requests"
This reverts commit a9327cac44.

Corrado Zoccolo <czoccolo@gmail.com> reports:

"with 2.6.32-rc1 I started getting the following strange output from
"iostat -kx 2":
Linux 2.6.31bisect (et2) 	04/10/2009 	_i686_	(2 CPU)

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
          10,70    0,00    3,16   15,75    0,00   70,38

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda              18,22     0,00    0,67    0,01    14,77     0,02
43,94     0,01   10,53 39043915,03 2629219,87
sdb              60,89     9,68   50,79    3,04  1724,43    50,52
65,95     0,70   13,06 488437,47 2629219,87

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           2,72    0,00    0,74    0,00    0,00   96,53

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00
sdb               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           6,68    0,00    0,99    0,00    0,00   92,33

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00
sdb               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           4,40    0,00    0,73    1,47    0,00   93,40

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00
sdb               0,00     4,00    0,00    3,00     0,00    28,00
18,67     0,06   19,50 333,33 100,00

Global values for service time and utilization are garbage. For
interval values, utilization is always 100%, and service time is
higher than normal.

I bisected it down to:
[a9327cac44] Seperate read and write
statistics of in_flight requests
and verified that reverting just that commit indeed solves the issue
on 2.6.32-rc1."

So until this is debugged, revert the bad commit.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-04 21:04:38 +02:00
Alexey Dobriyan
83d5cde47d const: make block_device_operations const
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:25 -07:00
Nikanth Karthikesan
a9327cac44 Seperate read and write statistics of in_flight requests
Currently, there is a single in_flight counter measuring the number of
requests in the request_queue. But some monitoring tools would like to
know how many read requests and write requests are in progress. Split the
current in_flight counter into two seperate counters for read and write.

This information is exported as a sysfs attribute, as changing the
currently available stat files would break the existing tools.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-14 08:24:52 +02:00
Jens Axboe
1f98a13f62 bio: first step in sanitizing the bio->bi_rw flag testing
Get rid of any functions that test for these bits and make callers
use bio_rw_flagged() directly. Then it is at least directly apparent
what variable and flag they check.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11 14:33:31 +02:00
Kiyoshi Ueda
a77e28c7e1 dm multipath: fix oops when request based io fails when no paths
The patch posted at http://marc.info/?l=dm-devel&m=124539787228784&w=2
which was merged into cec47e3d4a ("dm:
prepare for request based option") introduced a regression in
request-based dm.

If map_request() calls dm_kill_unmapped_request() to complete a cloned
bio without dispatching it, clone->bio is still set when
dm_end_request() is called and the BUG_ON(clone->bio) is incorrect.

The patch fixes this bug by freeing bio in dm_end_request() if the clone
has bio.  I've redone my tests to cover all I/O paths and confirmed
there's no other regression.

Here is the oops I hit in request-based dm when I do I/O to a multipath
device which doesn't have any active path nor queue_if_no_path setting:

------------[ cut here ]------------
kernel BUG at /root/2.6.31-rc4.rqdm/drivers/md/dm.c:828!
invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map
CPU 1
Modules linked in: autofs4 sunrpc cpufreq_ondemand acpi_cpufreq dm_mirror dm_region_hash dm_log dm_service_time dm_multipath scsi_dh dm_mod video output sbs sbshc battery ac sg sr_mod e1000e button cdrom serio_raw rtc_cmos rtc_core rtc_lib piix lpfc scsi_transport_fc ata_piix libata megaraid_sas sd_mod scsi_mod crc_t10dif ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
Pid: 7, comm: ksoftirqd/1 Not tainted 2.6.31-rc4.rqdm #1 Express5800/120Lj [N8100-1417]
RIP: 0010:[<ffffffffa023629d>]  [<ffffffffa023629d>] dm_softirq_done+0xbd/0x100 [dm_mod]
RSP: 0018:ffff8800280a1f08  EFLAGS: 00010282
RAX: ffffffffa02544e0 RBX: ffff8802aa1111d0 RCX: ffff8802aa1111e0
RDX: ffff8802ab913e70 RSI: 0000000000000000 RDI: ffff8802ab913e70
RBP: ffff8800280a1f28 R08: ffffc90005457040 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 00000000fffffffb
R13: ffff8802ab913e88 R14: ffff8802ab9c1438 R15: 0000000000000100
FS:  0000000000000000(0000) GS:ffff88002809e000(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000003d54a98640 CR3: 000000029f0a1000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process ksoftirqd/1 (pid: 7, threadinfo ffff8802ae50e000, task ffff8802ae4f8040)
Stack:
 ffff8800280a1f38 0000000000000020 ffffffff814f30a0 0000000000000004
<0> ffff8800280a1f58 ffffffff8116b245 ffff8800280a1f38 ffff8800280a1f38
<0> ffff8800280a1f58 0000000000000001 ffff8800280a1fa8 ffffffff810477bc
Call Trace:
 <IRQ>
 [<ffffffff8116b245>] blk_done_softirq+0x75/0x90
 [<ffffffff810477bc>] __do_softirq+0xcc/0x210
 [<ffffffff81047170>] ? ksoftirqd+0x0/0x110
 [<ffffffff8100ce7c>] call_softirq+0x1c/0x50
 <EOI>
 [<ffffffff8100e785>] do_softirq+0x65/0xa0
 [<ffffffff81047170>] ? ksoftirqd+0x0/0x110
 [<ffffffff810471e0>] ksoftirqd+0x70/0x110
 [<ffffffff81059559>] kthread+0x99/0xb0
 [<ffffffff8100cd7a>] child_rip+0xa/0x20
 [<ffffffff8100c73c>] ? restore_args+0x0/0x30
 [<ffffffff810594c0>] ? kthread+0x0/0xb0
 [<ffffffff8100cd70>] ? child_rip+0x0/0x20
Code: 44 89 e6 48 89 df e8 23 fb f2 e0 be 01 00 00 00 4c 89 f7 e8 f6 fd ff ff 5b 41 5c 41 5d 41 5e c9 c3 4c 89 ef e8 85 fe ff ff eb ed <0f> 0b eb fe 41 8b 85 dc 00 00 00 48 83 bb 10 01 00 00 00 89 83
RIP  [<ffffffffa023629d>] dm_softirq_done+0xbd/0x100 [dm_mod]
 RSP <ffff8800280a1f08>
---[ end trace 16af0a1d8542da55 ]---

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04 20:40:16 +01:00
Mike Snitzer
a732c207d1 dm: remove queue next_ordered workaround for barriers
This patch removes DM's bio-based vs request-based conditional setting
of next_ordered.  For bio-based DM the next_ordered check is no longer a
concern (as that check is now in the __make_request path).  For
request-based DM the default of QUEUE_ORDERED_NONE is now appropriate.

bio-based DM was changed to work-around the previously misplaced
next_ordered check with this commit:
99360b4c18

request-based DM does not yet support barriers but reacted to the above
bio-based DM change with this commit:
5d67aa2366

The above changes are no longer needed given Neil Brown's recent fix to
put the next_ordered check in the __make_request path:
db64f680ba

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: NeilBrown <neilb@suse.de>
Acked-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-07-23 20:30:40 +01:00
Martin K. Petersen
7878cba9f0 block: Create bip slabs with embedded integrity vectors
This patch restores stacking ability to the block layer integrity
infrastructure by creating a set of dedicated bip slabs.  Each bip slab
has an embedded bio_vec array at the end.  This cuts down on memory
allocations and also simplifies the code compared to the original bvec
version.  Only the largest bip slab is backed by a mempool.  The pool is
contained in the bio_set so stacking drivers can ensure forward
progress.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@carl.(none)>
2009-07-01 10:56:25 +02:00
Kiyoshi Ueda
523d9297d4 dm: disable interrupt when taking map_lock
This patch disables interrupt when taking map_lock to avoid
lockdep warnings in request-based dm.

request-based dm takes map_lock after taking queue_lock with
disabling interrupt:
  spin_lock_irqsave(queue_lock)
  q->request_fn() == dm_request_fn()
    => dm_get_table()
         => read_lock(map_lock)
while queue_lock could be (but isn't) taken in interrupt context.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:37 +01:00
Kiyoshi Ueda
5d67aa2366 dm: do not set QUEUE_ORDERED_DRAIN if request based
Request-based dm doesn't have barrier support yet.
So we need to set QUEUE_ORDERED_DRAIN only for bio-based dm.
Since the device type is decided at the first table loading time,
the flag set is deferred until then.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:36 +01:00
Kiyoshi Ueda
e6ee8c0b76 dm: enable request based option
This patch enables request-based dm.

o Request-based dm and bio-based dm coexist, since there are
  some target drivers which are more fitting to bio-based dm.
  Also, there are other bio-based devices in the kernel
  (e.g. md, loop).
  Since bio-based device can't receive struct request,
  there are some limitations on device stacking between
  bio-based and request-based.

                     type of underlying device
                   bio-based      request-based
   ----------------------------------------------
    bio-based         OK                OK
    request-based     --                OK

  The device type is recognized by the queue flag in the kernel,
  so dm follows that.

o The type of a dm device is decided at the first table binding time.
  Once the type of a dm device is decided, the type can't be changed.

o Mempool allocations are deferred to at the table loading time, since
  mempools for request-based dm are different from those for bio-based
  dm and needed mempool type is fixed by the type of table.

o Currently, request-based dm supports only tables that have a single
  target.  To support multiple targets, we need to support request
  splitting or prevent bio/request from spanning multiple targets.
  The former needs lots of changes in the block layer, and the latter
  needs that all target drivers support merge() function.
  Both will take a time.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:36 +01:00
Kiyoshi Ueda
cec47e3d4a dm: prepare for request based option
This patch adds core functions for request-based dm.

When struct mapped device (md) is initialized, md->queue has
an I/O scheduler and the following functions are used for
request-based dm as the queue functions:
    make_request_fn: dm_make_request()
    pref_fn:         dm_prep_fn()
    request_fn:      dm_request_fn()
    softirq_done_fn: dm_softirq_done()
    lld_busy_fn:     dm_lld_busy()
Actual initializations are done in another patch (PATCH 2).

Below is a brief summary of how request-based dm behaves, including:
  - making request from bio
  - cloning, mapping and dispatching request
  - completing request and bio
  - suspending md
  - resuming md

  bio to request
  ==============
  md->queue->make_request_fn() (dm_make_request()) calls __make_request()
  for a bio submitted to the md.
  Then, the bio is kept in the queue as a new request or merged into
  another request in the queue if possible.

  Cloning and Mapping
  ===================
  Cloning and mapping are done in md->queue->request_fn() (dm_request_fn()),
  when requests are dispatched after they are sorted by the I/O scheduler.

  dm_request_fn() checks busy state of underlying devices using
  target's busy() function and stops dispatching requests to keep them
  on the dm device's queue if busy.
  It helps better I/O merging, since no merge is done for a request
  once it is dispatched to underlying devices.

  Actual cloning and mapping are done in dm_prep_fn() and map_request()
  called from dm_request_fn().
  dm_prep_fn() clones not only request but also bios of the request
  so that dm can hold bio completion in error cases and prevent
  the bio submitter from noticing the error.
  (See the "Completion" section below for details.)

  After the cloning, the clone is mapped by target's map_rq() function
    and inserted to underlying device's queue using
    blk_insert_cloned_request().

  Completion
  ==========
  Request completion can be hooked by rq->end_io(), but then, all bios
  in the request will have been completed even error cases, and the bio
  submitter will have noticed the error.
  To prevent the bio completion in error cases, request-based dm clones
  both bio and request and hooks both bio->bi_end_io() and rq->end_io():
      bio->bi_end_io(): end_clone_bio()
      rq->end_io():     end_clone_request()

  Summary of the request completion flow is below:
  blk_end_request() for a clone request
    => blk_update_request()
       => bio->bi_end_io() == end_clone_bio() for each clone bio
          => Free the clone bio
          => Success: Complete the original bio (blk_update_request())
             Error:   Don't complete the original bio
    => blk_finish_request()
       => rq->end_io() == end_clone_request()
          => blk_complete_request()
             => dm_softirq_done()
                => Free the clone request
                => Success: Complete the original request (blk_end_request())
                   Error:   Requeue the original request

  end_clone_bio() completes the original request on the size of
  the original bio in successful cases.
  Even if all bios in the original request are completed by that
  completion, the original request must not be completed yet to keep
  the ordering of request completion for the stacking.
  So end_clone_bio() uses blk_update_request() instead of
  blk_end_request().
  In error cases, end_clone_bio() doesn't complete the original bio.
  It just frees the cloned bio and gives over the error handling to
  end_clone_request().

  end_clone_request(), which is called with queue lock held, completes
  the clone request and the original request in a softirq context
  (dm_softirq_done()), which has no queue lock, to avoid a deadlock
  issue on submission of another request during the completion:
      - The submitted request may be mapped to the same device
      - Request submission requires queue lock, but the queue lock
        has been held by itself and it doesn't know that

  The clone request has no clone bio when dm_softirq_done() is called.
  So target drivers can't resubmit it again even error cases.
  Instead, they can ask dm core for requeueing and remapping
  the original request in that cases.

  suspend
  =======
  Request-based dm uses stopping md->queue as suspend of the md.
  For noflush suspend, just stops md->queue.

  For flush suspend, inserts a marker request to the tail of md->queue.
  And dispatches all requests in md->queue until the marker comes to
  the front of md->queue.  Then, stops dispatching request and waits
  for the all dispatched requests to complete.
  After that, completes the marker request, stops md->queue and
  wake up the waiter on the suspend queue, md->wait.

  resume
  ======
  Starts md->queue.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:35 +01:00
Mike Snitzer
754c5fc7eb dm: calculate queue limits during resume not load
Currently, device-mapper maintains a separate instance of 'struct
queue_limits' for each table of each device.  When the configuration of
a device is to be changed, first its table is loaded and this structure
is populated, then the device is 'resumed' and the calculated
queue_limits are applied.

This places restrictions on how userspace may process related devices,
where it is often advantageous to 'load' tables for several devices
at once before 'resuming' them together.  As the new queue_limits
only take effect after the 'resume', if they are changing and one
device uses another, the latter must be 'resumed' before the former
may be 'loaded'.

This patch moves the calculation of these queue_limits out of
the 'load' operation into 'resume'.  Since we are no longer
pre-calculating this struct, we no longer need to maintain copies
within our dm structs.

dm_set_device_limits() now passes the 'start' of the device's
data area (aka pe_start) as the 'offset' to blk_stack_limits().

init_valid_queue_limits() is replaced by blk_set_default_limits().

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: martin.petersen@oracle.com
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:34 +01:00
Milan Broz
60935eb21d dm ioctl: support cookies for udev
Add support for passing a 32 bit "cookie" into the kernel with the
DM_SUSPEND, DM_DEV_RENAME and DM_DEV_REMOVE ioctls.  The (unsigned)
value of this cookie is returned to userspace alongside the uevents
issued by these ioctls in the variable DM_COOKIE.

This means the userspace process issuing these ioctls can be notified
by udev after udev has completed any actions triggered.

To minimise the interface extension, we pass the cookie into the
kernel in the event_nr field which is otherwise unused when calling
these ioctls.  Incrementing the version number allows userspace to
determine in advance whether or not the kernel supports the cookie.
If the kernel does support this but userspace does not, there should
be no impact as the new variable will just get ignored.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:30 +01:00
Mikulas Patocka
52b1fd5a27 dm: send empty barriers to targets in dm_flush
Pass empty barrier flushes to the targets in dm_flush().

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:21 +01:00
Alasdair G Kergon
9015df24a8 dm: initialise tio in alloc_tio
Move repeated dm_target_io initialisation inside alloc_tio().

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:21 +01:00
Mikulas Patocka
f9ab94cee3 dm: introduce num_flush_requests
Introduce num_flush_requests for a target to set to say how many flush
instructions (empty barriers) it wants to receive.  These are sent by
__clone_and_map_empty_barrier with map_info->flush_request going from 0
to (num_flush_requests - 1).

Old targets without flush support won't receive any flush requests.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:20 +01:00
Mikulas Patocka
27eaa14975 dm: remove check that prevents mapping empty bios
Remove the check that the size of the cloned bio is not zero because a
subsequent patch needs to send zero-sized barriers down this path.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:20 +01:00
Mikulas Patocka
fdb9572b73 dm: remove EOPNOTSUPP for barriers
If the underlying device doesn't support barriers and dm receives a
barrier, it waits until all requests on that device drain so it no
longer needs to report -EOPNOTSUPP to the caller.

This patch deals with the confusing situation when moving a volume from
one physical device to another triggers an EOPNOTSUPP on a volume that
didn't report it before.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:19 +01:00
Mikulas Patocka
5aa2781d96 dm: store only first barrier error
With the following patches, more than one error can occur during
processing.  Change md->barrier_error so that only the first one is
recorded and returned to the caller.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:18 +01:00
Mikulas Patocka
2761e95fe4 dm: process requeue in dm_wq_work
If barrier request was returned with DM_ENDIO_REQUEUE,
requeue it in dm_wq_work instead of dec_pending.

This allows us to correctly handle a situation when some targets
are asking for a requeue and other targets signal an error.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:18 +01:00
Mikulas Patocka
531fe96364 dm: make dm_flush return void
Make dm_flush return void.

The first error during flush is stored in md->barrier_error instead.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:17 +01:00
Mikulas Patocka
32a926da5a dm: always hold bdev reference
Fix a potential deadlock when creating multiple snapshots by holding a
reference to struct block_device for the whole lifecycle of every dm
device instead of obtaining it independently at each point it is needed.

bdget_disk() was called while the device was being suspended, in
dm_suspend().  However there could be other devices already suspended,
for example when creating additional snapshots of a device. bdget_disk()
can wait for IO and allocate memory resulting in waiting for the
already-suspended device - deadlock.

This patch changes the code so that it gets the reference to struct
block_device when struct mapped_device is allocated and initialized in
alloc_dev() where it is always OK to allocate memory or wait for I/O.
It drops the reference when it is destroyed in free_dev().  Thus there
is no call to bdget_disk() while any device is suspended.

Previously unlock_fs() was called only if bdev was held.  Now it is
called unconditionally, but the superfluous calls are harmless because
it returns immediately if the filesystem was not previously frozen.

This patch also now allows the device size to be changed in a
noflush suspend because the bdev is held.  This has no adverse effect.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:17 +01:00
Mikulas Patocka
db8fef4fab dm: rename suspended_bdev to bdev
Rename suspended_bdev to bdev.

This patch doesn't change any functionality, just renames the variable.
In the next patch, the variable will be used even for non-suspended device.

(Pre-requisite for the per-target barrier support patches.)

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:15 +01:00
Mikulas Patocka
8cbeb67ad5 dm: avoid unsupported spanning of md stripe boundaries
A bio that has two or more vector entries, size less than or equal to
page size, that crosses a stripe boundary of an underlying md device is
accepted by device mapper (it conforms to all its limits) but not by the
underlying device.

The fix is: If device mapper selects the one-page maximum request size,
it also needs to set its own q->merge_bvec_fn to reject any bios with
multiple vector entries that span more pages.

The problem was discovered in the following scenario:
  * MD - RAID-0
  * LV on the top of it (raid1, snapshot or striped with chunk
size/stripe larger than RAID-0 stripe)
  * one of the logical volumes is exported to xen domU
  * inside xen domU it is partitioned, the key point is that the partition
must be unaligned on page boundary (fdisk normally aligns the partition to
63 sectors which will trigger it)
  * install the system on the partitioned disk in domU
This causes I/O failures in dom0.
Reference: https://bugzilla.redhat.com/show_bug.cgi?id=223947

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:14 +01:00
Milan Broz
4d89b7b4e4 dm: sysfs skip output when device is being destroyed
Do not process sysfs attributes when device is being destroyed.

Otherwise code can cause
  BUG_ON(test_bit(DMF_FREEING, &md->flags));
in dm_put() call.

Cc: stable@kernel.org
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:11 +01:00
Li Zefan
e212d6f250 block: remove some includings of blktrace_api.h
When porting blktrace to tracepoints, we changed to trace/block.h
for trace prober declarations.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16 11:19:36 +02:00
Li Zefan
55782138e4 tracing/events: convert block trace points to TRACE_EVENT()
TRACE_EVENT is a more generic way to define tracepoints. Doing so adds
these new capabilities to this tracepoint:

  - zero-copy and per-cpu splice() tracing
  - binary tracing without printf overhead
  - structured logging records exposed under /debug/tracing/events
  - trace events embedded in function tracer output and other plugins
  - user-defined, per tracepoint filter expressions
  ...

Cons:

  - no dev_t info for the output of plug, unplug_timer and unplug_io events.
    no dev_t info for getrq and sleeprq events if bio == NULL.
    no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL.

    This is mainly because we can't get the deivce from a request queue.
    But this may change in the future.

  - A packet command is converted to a string in TP_assign, not TP_print.
    While blktrace do the convertion just before output.

    Since pc requests should be rather rare, this is not a big issue.

  - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT
    has a unique format, which means we have some unused data in a trace entry.

    The overhead is minimized by using __dynamic_array() instead of __array().

I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing:

      dd                   dd + ioctl blktrace       dd + TRACE_EVENT (splice)
1     7.36s, 42.7 MB/s     7.50s, 42.0 MB/s          7.41s, 42.5 MB/s
2     7.43s, 42.3 MB/s     7.48s, 42.1 MB/s          7.43s, 42.4 MB/s
3     7.38s, 42.6 MB/s     7.45s, 42.2 MB/s          7.41s, 42.5 MB/s

So the overhead of tracing is very small, and no regression when using
those trace events vs blktrace.

And the binary output of TRACE_EVENT is much smaller than blktrace:

 # ls -l -h
 -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0
 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1
 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out

Following are some comparisons between TRACE_EVENT and blktrace:

plug:
  kjournald-480   [000]   303.084981: block_plug: [kjournald]
  kjournald-480   [000]   303.084981:   8,0    P   N [kjournald]

unplug_io:
  kblockd/0-118   [000]   300.052973: block_unplug_io: [kblockd/0] 1
  kblockd/0-118   [000]   300.052974:   8,0    U   N [kblockd/0] 1

remap:
  kjournald-480   [000]   303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384
  kjournald-480   [000]   303.085043:   8,0    A   W 102736992 + 8 <- (8,8) 33384

bio_backmerge:
  kjournald-480   [000]   303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald]
  kjournald-480   [000]   303.085086:   8,0    M   W 102737032 + 8 [kjournald]

getrq:
  kjournald-480   [000]   303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084975:   8,0    G   W 102736984 + 8 [kjournald]

  bash-2066  [001]  1072.953770:   8,0    G   N [bash]
  bash-2066  [001]  1072.953773: block_getrq: 0,0 N 0 + 0 [bash]

rq_complete:
  konsole-2065  [001]   300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0]
  konsole-2065  [001]   300.053191:   8,0    C   W 103669040 + 16 [0]

  ksoftirqd/1-7   [001]  1072.953811:   8,0    C   N (5a 00 08 00 00 00 00 00 24 00) [0]
  ksoftirqd/1-7   [001]  1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0]

rq_insert:
  kjournald-480   [000]   303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084986:   8,0    I   W 102736984 + 8 [kjournald]

Changelog from v2 -> v3:

- use the newly introduced __dynamic_array().

Changelog from v1 -> v2:

- use __string() instead of __array() to minimize the memory required
  to store hex dump of rq->cmd().

- support large pc requests.

- add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT.

- some cleanups.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 12:34:23 -04:00
Ingo Molnar
44347d947f Merge branch 'linus' into tracing/core
Merge reason: tracing/core was on a .30-rc1 base and was missing out on
              on a handful of tracing fixes present in .30-rc5-almost.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-07 11:17:34 +02:00
Alan D. Brunelle
22a7c31a96 blktrace: from-sector redundant in trace_block_remap
Remove redundant from-sector parameter: it's /always/ the bio's sector
passed in.

[ Impact: cleanup ]

Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <49FF517C.7000503@hp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-06 14:13:01 +02:00
Christoph Hellwig
8f3d8ba20e block: move bio list helpers into bio.h
It's used by DM and MD and generally useful, so move the bio list
helpers into bio.h.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 08:28:09 +02:00
Mikulas Patocka
af7e466a1a dm: implement basic barrier support
Barriers are submitted to a worker thread that issues them in-order.

The thread is modified so that when it sees a barrier request it waits
for all pending IO before the request then submits the barrier and
waits for it.  (We must wait, otherwise it could be intermixed with
following requests.)

Errors from the barrier request are recorded in a per-device barrier_error
variable. There may be only one barrier request in progress at once.

For now, the barrier request is converted to a non-barrier request when
sending it to the underlying device.

This patch guarantees correct barrier behavior if the underlying device
doesn't perform write-back caching. The same requirement existed before
barriers were supported in dm.

Bottom layer barrier support (sending barriers by target drivers) and
handling devices with write-back caches will be done in further patches.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:16 +01:00
Mikulas Patocka
92c639021c dm: remove dm_request loop
Remove queue_io return value and a loop in dm_request.

IO may be submitted to a worker thread with queue_io().  queue_io() sets
DMF_QUEUE_IO_TO_THREAD so that all further IO is queued for the thread. When
the thread finishes its work, it clears DMF_QUEUE_IO_TO_THREAD and from this
point on, requests are submitted from dm_request again. This will be used
for processing barriers.

Remove the loop in dm_request. queue_io() can submit I/Os to the worker thread
even if DMF_QUEUE_IO_TO_THREAD was not set.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:15 +01:00
Mikulas Patocka
3b00b2036f dm: rework queueing and suspension
Rework shutting down on suspend and document the associated rules.

Drop write lock in __split_and_process_bio to allow more processing
concurrency.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:15 +01:00
Alasdair G Kergon
54d9a1b451 dm: simplify dm_request loop
Refactor the code in dm_request().

Require the new DMF_BLOCK_FOR_SUSPEND flag on readahead bios we will
discard so we don't drop such bios while processing a barrier.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:14 +01:00
Alasdair G Kergon
1eb787ec18 dm: split DMF_BLOCK_IO flag into two
Split the DMF_BLOCK_IO flag into two.

DMF_BLOCK_IO_FOR_SUSPEND is set when I/O must be blocked while suspending a
device.  DMF_QUEUE_IO_TO_THREAD is set when I/O must be queued to a
worker thread for later processing.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:14 +01:00
Alasdair G Kergon
df12ee9963 dm: rearrange dm_wq_work
Refactor dm_wq_work() to make later patch more readable.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:13 +01:00
Mikulas Patocka
692d0eb9e0 dm: remove limited barrier support
Prepare for full barrier implementation: first remove the restricted support.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:13 +01:00
Martin K. Petersen
9c47008d13 dm: add integrity support
This patch provides support for data integrity passthrough in the device
mapper.

 - If one or more component devices support integrity an integrity
   profile is preallocated for the DM device.

 - If all component devices have compatible profiles the DM device is
   flagged as capable.

 - Handle integrity metadata when splitting and cloning bios.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-09 00:27:12 +01:00
Mikulas Patocka
99360b4c18 dm: set queue ordered mode
Set queue ordered mode.  It doesn't really matter what we set here
because we don't ever put any requests on the queue.  But we need to set
something other than QUEUE_ORDERED_NONE so that __generic_make_request
passes barrier requests to us.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:39 +01:00
Mikulas Patocka
b44ebeb017 dm: move wait queue declaration
Move wait queue declaration and unplug to dm_wait_for_completion.

The purpose is to minimize duplicate code in the further patches.

The patch reorders functions a little bit. It doesn't change any
functionality. For proper non-deadlock operation, add_wait_queue must
happen before set_current_state(interruptible) and before the test for
!atomic_read(&md->pending).

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:39 +01:00
Mikulas Patocka
022c261100 dm: merge pushback and deferred bio lists
Merge pushback and deferred lists into one list - use deferred list
for both deferred and pushed-back bios.

This will be needed for proper support of barrier bios: it is impossible to
support ordering correctly with two lists because the requests on both lists
will be mixed up.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:39 +01:00
Mikulas Patocka
401600dfd3 dm: allow uninterruptible wait for pending io
Allow uninterruptible wait for pending IOs.

Add argument "interruptible" to dm_wait_for_completion that specifies
either interruptible or uninterruptible waiting.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:38 +01:00
Mikulas Patocka
ef2085870e dm: merge __flush_deferred_io into caller
Merge __flush_deferred_io() into the only caller, dm_wq_work().

There's no need to have a function that has only one caller.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:38 +01:00
Mikulas Patocka
f0b9a4502b dm: move bio_io_error into __split_and_process_bio
Move the bio_io_error() calls directly into __split_and_process_bio().

This avoids some code duplication in later patches.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:38 +01:00
Mikulas Patocka
8a53c28db4 dm: rename __split_bio
Rename __split_bio() to __split_and_process_bio() because it not only splits
the bio to serveral parts, but also submits them to target drivers.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:37 +01:00
Mikulas Patocka
53d5914f28 dm: remove unnecessary struct dm_wq_req
Remove struct dm_wq_req and move "work" directly into struct mapped_device.

In the revised implementation, the thread will do just one type of work
(processing the queue).

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:37 +01:00
Mikulas Patocka
9a1fb46448 dm: remove unnecessary work queue context field
Remove the context field from struct dm_wq_req because we will no longer
need it.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:36 +01:00
Mikulas Patocka
143773965b dm: remove unnecessary work queue type field
Remove "type" field from struct dm_wq_req because we no longer need it
to have more than one value.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:36 +01:00
Milan Broz
b35f8caa08 dm crypt: wait for endio to complete before destruction
The following oops has been reported when dm-crypt runs over a loop device.

...
[   70.381058] Process loop0 (pid: 4268, ti=cf3b2000 task=cf1cc1f0 task.ti=cf3b2000)
...
[   70.381058] Call Trace:
[   70.381058]  [<d0d76601>] ? crypt_dec_pending+0x5e/0x62 [dm_crypt]
[   70.381058]  [<d0d767b8>] ? crypt_endio+0xa2/0xaa [dm_crypt]
[   70.381058]  [<d0d76716>] ? crypt_endio+0x0/0xaa [dm_crypt]
[   70.381058]  [<c01a2f24>] ? bio_endio+0x2b/0x2e
[   70.381058]  [<d0806530>] ? dec_pending+0x224/0x23b [dm_mod]
[   70.381058]  [<d08066e4>] ? clone_endio+0x79/0xa4 [dm_mod]
[   70.381058]  [<d080666b>] ? clone_endio+0x0/0xa4 [dm_mod]
[   70.381058]  [<c01a2f24>] ? bio_endio+0x2b/0x2e
[   70.381058]  [<c02bad86>] ? loop_thread+0x380/0x3b7
[   70.381058]  [<c02ba8a1>] ? do_lo_send_aops+0x0/0x165
[   70.381058]  [<c013754f>] ? autoremove_wake_function+0x0/0x33
[   70.381058]  [<c02baa06>] ? loop_thread+0x0/0x3b7

When a table is being replaced, it waits for I/O to complete
before destroying the mempool, but the endio function doesn't
call mempool_free() until after completing the bio.

Fix it by swapping the order of those two operations.

The same problem occurs in dm.c with md referenced after dec_pending.
Again, we swap the order.

Cc: stable@kernel.org
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-03-16 17:44:36 +00:00
Milan Broz
784aae735d dm: add name and uuid to sysfs
Implement simple read-only sysfs entry for device-mapper block device.

This patch adds a simple sysfs directory named "dm" under block device
properties and implements
	- name attribute (string containing mapped device name)
	- uuid attribute (string containing UUID, or empty string if not set)

The kobject is embedded in mapped_device struct, so no additional
memory allocation is needed for initializing sysfs entry.

During the processing of sysfs attribute we need to lock mapped device
which is done by a new function dm_get_from_kobj, which returns the md
associated with kobject and increases the usage count.

Each 'show attribute' function is responsible for its own locking.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:05:12 +00:00