Commit Graph

178 Commits

Author SHA1 Message Date
Alan Cox
593573bc55 termios: Termios defines for other platforms
Fix up the termios of the people who have not yet got with the program

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20 17:12:38 -07:00
Haavard Skinnemoen
7d2be0749a atmel-mci: Driver for Atmel on-chip MMC controllers
This is a driver for the MMC controller on the AP7000 chips from
Atmel. It should in theory work on AT91 systems too with some
tweaking, but since the DMA interface is quite different, it's not
entirely clear if it's worth merging this with the at91_mci driver.

This driver has been around for a while in BSPs and kernel sources
provided by Atmel, but this particular version uses the generic DMA
Engine framework (with the slave extensions) instead of an
avr32-only DMA controller framework.

This driver can also use PIO transfers when no DMA channels are
available, and for transfers where using DMA may be difficult or
impractical for some reason (e.g. the DMA setup overhead is usually
not worth it for very short transfers, and badly aligned buffers or
lengths are difficult to handle.)

Currently, the driver only support PIO transfers. DMA support has been
split out to a separate patch to hopefully make it easier to review.

The driver has been tested using mmc-block and ext3fs on several SD,
SDHC and MMC+ cards. Reads and writes work fine, with read transfer
rates up to 3.5 MiB/s on fast cards with debugging disabled.

The driver has also been tested using the mmc_test module on the same
cards. All tests except 7, 9, 15 and 17 succeed. The first two are
unsupported by all the cards I have, so I don't know if the driver
handles this correctly. The last two fail because the hardware flags a
Data CRC Error instead of a Data Timeout error. I'm not sure how to deal
with that.

Documentation for this controller can be found in many data sheets from
Atmel, including the AT32AP7000 data sheet which can be found here:

http://www.atmel.com/dyn/products/datasheets.asp?family_id=682

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15 14:14:49 +02:00
Linus Torvalds
6c118e43dc Merge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: (31 commits)
  avr32: Fix typo of IFSR in a comment in the PIO header file
  avr32: Power Management support ("standby" and "mem" modes)
  avr32: Add system device for the internal interrupt controller (intc)
  avr32: Add simple SRAM allocator
  avr32: Enable SDRAMC clock at startup
  rtc-at32ap700x: Enable wakeup
  macb: Basic suspend/resume support
  atmel_serial: Drain console TX shifter before suspending
  atmel_serial: Fix build on avr32 with CONFIG_PM enabled
  avr32: Use a quicklist for PTE allocation as well
  avr32: Use a quicklist for PGD allocation
  avr32: Cover the kernel page tables in the user PGDs
  avr32: Store virtual addresses in the PGD
  avr32: Remove useless zeroing of swapper_pg_dir at startup
  avr32: Clean up and optimize the TLB operations
  avr32: Rename at32ap.c -> pdc.c
  avr32: Move setup_platform() into chip-specific file
  avr32: Kill special exception handler sections
  avr32: Kill unneeded #include <asm/pgalloc.h> from asm/mmu_context.h
  avr32: Clean up time.c #includes
  ...
2008-07-14 13:37:29 -07:00
Uwe Kleine-König
ac310bb5db Fix name of Russell King in various comments
This patch was created by

	git grep -E -l 'Rus(el|s?e)l King' | xargs -r -t perl -p -i -e 's/Rus(el|s?e)l King/Russell King/g'

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Most-Definitely-Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-10 18:04:43 -07:00
Haavard Skinnemoen
02a00cf672 avr32: Power Management support ("standby" and "mem" modes)
Implement Standby support. In this mode, we'll suspend all drivers,
put the SDRAM in self-refresh mode and switch off the HSB bus
("frozen" mode.)

Implement Suspend-to-mem support. In this mode, we suspend all
drivers, put the SDRAM into self-refresh mode and switch off all
internal clocks except the 32 kHz oscillator ("stop" mode.)

The lowest-level suspend code runs from a small portion of SRAM
allocated at startup time. This gets rid of a small potential race
with the SDRAM where we might try to enter self-refresh mode in the
middle of an icache burst. We also relocate all interrupt and
exception handlers to SRAM during the small window when we enter and
exit the low-power modes.

We don't need to do any special tricks to start and stop the PLL. The
main clock is automatically gated by hardware until the PLL is stable.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-07-02 11:05:01 +02:00
Haavard Skinnemoen
b83d6ee175 avr32: Add simple SRAM allocator
Add SRAM allocator for avr32, which is just a thin wrapper around
genalloc.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-07-02 11:05:01 +02:00
Haavard Skinnemoen
38510754a5 avr32: Use a quicklist for PTE allocation as well
Using a quicklist to allocate PTEs might be slightly faster than using
the page allocator directly since we might avoid zeroing the page
after each allocation.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-02 11:01:29 +02:00
Haavard Skinnemoen
5a4d529277 avr32: Use a quicklist for PGD allocation
Use a quicklist to allocate process PGDs. This is expected to be
slightly faster since we need to copy entries from swapper_pg_dir,
which can stay around for pages on the PGD quick list.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-02 11:01:29 +02:00
Haavard Skinnemoen
a9a934f278 avr32: Cover the kernel page tables in the user PGDs
Expand the per-process PGDs so that they cover the kernel virtual
memory area as well. This simplifies the TLB miss handler fastpath
since it doesn't have to check for kernel addresses anymore.

If a TLB miss happens on a kernel address and a second-level page
table can't be found, we check swapper_pg_dir and copy the PGD entry
into the user PGD if it can be found there.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-02 11:01:29 +02:00
Haavard Skinnemoen
cfd23e93a0 avr32: Store virtual addresses in the PGD
Instead of storing physical addresses along with page flags in the
PGD, store virtual addresses and use NULL to indicate a not present
second-level page table. A non-page-aligned page table indicates a bad
PMD.

This simplifies the TLB miss handler since it no longer has to check
the Present bit and no longer has to convert the PGD entry from
physical to virtual address. Instead, it has to check for a NULL
entry, which is slightly cheaper than either.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-02 11:01:28 +02:00
Haavard Skinnemoen
b13d618b44 avr32: Clean up and optimize the TLB operations
This and the following patches aim to optimize the code dealing with
page tables and TLB operations. Each patch reduces the time it takes
to gzip a 16 MB file slightly, but I expect things like fork() and
mmap() will improve somewhat more.

This patch deals with the low-level TLB operations:

  * Remove unused _TLBEHI_I define
  * Use gcc builtins instead of inline assembly
  * Remove a few unnecessary pipeline flushes and nops
  * Introduce NR_TLB_ENTRIES define and use it instead of hardcoding it
    to 32 a few places throughout the code.
  * Use sysreg bitops instead of hardcoded shifts and masks
  * Make a few needlessly global functions static

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-02 11:01:28 +02:00
Haavard Skinnemoen
65033ed740 avr32: Move setup_platform() into chip-specific file
Combine at32_clock_init() and at32_portmux_init() into
setup_platform() and remove setup_platform() from at32ap.c. No
functional change since all setup_platform() ever did was call those
two functions.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-06-28 15:08:39 +02:00
Haavard Skinnemoen
5b72b52cab avr32: Kill unneeded #include <asm/pgalloc.h> from asm/mmu_context.h
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 17:48:05 +02:00
Hans-Christian Egtvedt
d86d314f67 avr32: Add PSIF platform devices
This patch adds the PS/2 interface (PSIF) to the device code, split into
two platform devices, one for each port.

The function for adding the PSIF platform device is also added to the
board header file.

Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:32:28 +02:00
Hans-Christian Egtvedt
47882cf620 avr32: Add pin configuration choice to LCDC peripheral
This patch lets the board code choose which pin out to use for the LCD
interface.

On AT32AP7000 the LCDC is wired to two sets of pins, which lets the user
choose between dual ethernet and 32-bit EBI. For the ATNGW100 board it
is vital to have the choice to select the alternative pinout since this
pinout is routed to the external headers.

Update ATSTK1002 and ATSTK1004 to use the new interface.

Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:32:27 +02:00
Alex
60ed7951d0 avr32: Allow board to define oscillator rates
On our custom board we have other oscillator rates than on atngw100 and
atstk100x.

Currently these rates are hardcoded in arch/avr32/mach-at32ap/at32ap700x.c.

This patch moves them into board specific code.

Signed-off-by: Alex Raimondi <raimondi@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:07:16 +02:00
Haavard Skinnemoen
b788ed5c97 avr32: Provide PCI DMA mapping API
Some non-PCI drivers need the PCI variant of the DMA mapping API.
Include <asm-generic/pci-dma-compat.h> to provide this through the
non-PCI DMA mapping API.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:07:01 +02:00
H. Peter Anvin
63eae0ccac avr32: types: use <asm-generic/int-*.h> for the avr32 architecture
This modifies <asm-avr32/types.h> to use the <asm-generic/int-*.h>
generic include files.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-05-02 16:18:20 -07:00
Harvey Harrison
6510d41954 kernel: Move arches to use common unaligned access
Unaligned access is ok for the following arches:
cris, m68k, mn10300, powerpc, s390, x86

Arches that use the memmove implementation for native endian, and
the byteshifting for the opposite endianness.
h8300, m32r, xtensa

Packed struct for native endian, byteshifting for other endian:
alpha, blackfin, ia64, parisc, sparc, sparc64, mips, sh

m86knommu is generic_be for Coldfire, otherwise unaligned access is ok.

frv, arm chooses endianness based on compiler settings, uses the byteshifting
versions.  Remove the unaligned trap handler from frv as it is now unused.

v850 is le, uses the byteshifting versions for both be and le.

Remove the now unused asm-generic implementation.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:27 -07:00
Nick Piggin
7e675137a8 mm: introduce pte_special pte bit
s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory
model (which is more dynamic than most).  Instead, they had proposed to
implement it with an additional path through vm_normal_page(), using a bit in
the pte to determine whether or not the page should be refcounted:

vm_normal_page()
{
	...
        if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) {
                if (vma->vm_flags & VM_MIXEDMAP) {
#ifdef s390
			if (!mixedmap_refcount_pte(pte))
				return NULL;
#else
                        if (!pfn_valid(pfn))
                                return NULL;
#endif
                        goto out;
                }
	...
}

This is fine, however if we are allowed to use a bit in the pte to determine
refcountedness, we can use that to _completely_ replace all the vma based
schemes.  So instead of adding more cases to the already complex vma-based
scheme, we can have a clearly seperate and simple pte-based scheme (and get
slightly better code generation in the process):

vm_normal_page()
{
#ifdef s390
	if (!mixedmap_refcount_pte(pte))
		return NULL;
	return pte_page(pte);
#else
	...
#endif
}

And finally, we may rather make this concept usable by any architecture rather
than making it s390 only, so implement a new type of pte state for this.
Unfortunately the old vma based code must stay, because some architectures may
not be able to spare pte bits.  This makes vm_normal_page a little bit more
ugly than we would like, but the 2 cases are clearly seperate.

So introduce a pte_special pte state, and use it in mm/memory.c.  It is
currently a noop for all architectures, so this doesn't actually result in any
compiled code changes to mm/memory.o.

BTW:
I haven't put vm_normal_page() into arch code as-per an earlier suggestion.
The reason is that, regardless of where vm_normal_page is actually
implemented, the *abstraction* is still exactly the same. Also, while it
depends on whether the architecture has pte_special or not, that is the
only two possible cases, and it really isn't an arch specific function --
the role of the arch code should be to provide primitive functions and
accessors with which to build the core code; pte_special does that. We do
not want architectures to know or care about vm_normal_page itself, and
we definitely don't want them being able to invent something new there
out of sight of mm/ code. If we made vm_normal_page an arch function, then
we have to make vm_insert_mixed (next patch) an arch function too. So I
don't think moving it to arch code fundamentally improves any abstractions,
while it does practically make the code more difficult to follow, for both
mm and arch developers, and easier to misuse.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Cc: Jared Hulbert <jaredeh@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:23 -07:00
Adrian Bunk
29a0c39386 avr32: add include/asm-avr32/serial.h
On Mon, Apr 14, 2008 at 03:36:24PM +0100, Alan Cox wrote:
> On Mon, 14 Apr 2008 17:17:21 +0300
> Adrian Bunk <bunk@kernel.org> wrote:
>
> > This patch fixes the following build error:
> >
> > <--  snip  -->
> >
> > ...
> >   CC [M]  drivers/serial/8250.o
> > /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/serial/8250.c:95:24: error: asm/serial.h: No such file or directory
> > make[3]: *** [drivers/serial/8250.o] Error 1
> >
> > <--  snip  -->
> >
> > Signed-off-by: Adrian Bunk <bunk@kernel.org>
> >
> > ---
> > 3cb4ef80d75e118ccfd44f7006aea3db54afb31c diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> > index b1bbaa0..b0e216d 100644
> > --- a/drivers/serial/Kconfig
> > +++ b/drivers/serial/Kconfig
> > @@ -11,7 +11,7 @@ menu "Serial drivers"
> >  # The new 8250/16550 serial drivers
> >  config SERIAL_8250
> >  	tristate "8250/16550 and compatible serial support"
> > -	depends on (BROKEN || !SPARC)
> > +	depends on (BROKEN || !SPARC) && !AVR32
> >  	select SERIAL_CORE
> >  	---help---
>
> NAK.
>
> Add an asm/serial.h to the platform as it has PCI so will have 8250 PCI
> devices available to it. A copy of the MIPS one should be right.

Patch below.

> Alan

cu
Adrian

<--  snip  -->

This patch fixes the following build error with CONFIG_SERIAL_8250:

<--  snip  -->

...
  CC [M]  drivers/serial/8250.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/serial/8250.c:95:24: error: asm/serial.h: No such file or directory
make[3]: *** [drivers/serial/8250.o] Error 1

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-04-19 20:40:10 -04:00
Adrian Bunk
5e840eca46 add include/asm-avr32/xor.h
This patch fixes the following compile error with CONFIG_MD_RAID456
on avr32:

<--  snip  -->

...
  CC [M]  crypto/xor.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/crypto/xor.c:23:21: error: asm/xor.h: No such file or directory
/home/bunk/linux/kernel-2.6/git/linux-2.6/crypto/xor.c: In function 'calibrate_xor_blocks':
/home/bunk/linux/kernel-2.6/git/linux-2.6/crypto/xor.c:131: error: 'XOR_TRY_TEMPLATES' undeclared (first use in this function)
/home/bunk/linux/kernel-2.6/git/linux-2.6/crypto/xor.c:131: error: (Each undeclared identifier is reported only once
/home/bunk/linux/kernel-2.6/git/linux-2.6/crypto/xor.c:131: error: for each function it appears in.)
make[2]: *** [crypto/xor.o] Error 1

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-04-19 20:40:09 -04:00
David Brownell
e723ff666a avr32: Generic clockevents support
This combines three patches from David Brownell:
  * avr32: tclib support
  * avr32: simplify clocksources
  * avr32: Turn count/compare into a oneshot clockevent device

Register both TC blocks (instead of just the first one) so that
the AT32/AT91 tclib code will pick them up (instead of just the
avr32-only PIT-style clocksource).

Rename the first one and its resources appropriately.

More cleanups to the cycle counter clocksource code

 - Disable all the weak symbol magic; remove the AVR32-only TCB-based
   clocksource code (source and header).

 - Mark the __init code properly.

 - Don't forget to report IRQF_TIMER.

 - Make the system work properly with this clocksource, by preventing
   use of the CPU "idle" sleep state in the idle loop when it's used.

Package the avr32 count/compare timekeeping support as a oneshot
clockevent device, so it supports NO_HZ and high res timers.
This means it also supports plugging in other clockevent devices
and clocksources.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-04-19 20:40:08 -04:00
Haavard Skinnemoen
7e59128f31 avr32: Move sleep code into mach-at32ap
Create a new file, pm-at32ap700x.S, in mach-at32ap and move the CPU
idle sleep code there. Make it possible to disable the sleep code.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-04-19 20:40:07 -04:00
Haavard Skinnemoen
02f99d1ca7 avr32: Use constants from sysreg.h in asm.h
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-04-19 20:40:07 -04:00
Haavard Skinnemoen
46acb55b4b avr32: Delete mostly unused header asm/intc.h
Move the only thing that was actually implemented and used in
asm/intc.h, intc_get_pending(), into asm/irq.h and delete asm/intc.h

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-04-19 20:40:07 -04:00
Ben Nizette
040b28fc0a avr32: pass i2c board info through at32_add_device_twi
New-style I2C drivers require that motherboard-mounted I2C devices are
registered with the I2C core, typically at arch_initcall time.  This
can be done nice and neat by passing the struct i2c_board_info[]
through at32_add_device_twi just like we do for the SPI board info.

While we've got the hood up, remove a duplicate declaration of
at32_add_device_twi() in board.h.

[hskinnemoen@atmel.com: add missing i2c_board_info forward-declaration]
Signed-Off-By: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-04-19 20:40:06 -04:00
Cyrill Gorcunov
e573ebb032 avr32: cleanup - use _AC macro to define PAGE_SIZE
PAGE_SIZE is used both from assembly and C code. We want to have type
specifiers when using it from C, but this will make the assembler
confused, so we need to make it conditional.

This is exactly what the _AC macro is for, so using it allows us to
get rid of a few lines of cpp noise.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-04-19 20:40:06 -04:00
Haavard Skinnemoen
e1c25dc638 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/usba-2.6.26 into base 2008-04-19 20:38:41 -04:00
Matthew Wilcox
64ac24e738 Generic semaphore implementation
Semaphores are no longer performance-critical, so a generic C
implementation is better for maintainability, debuggability and
extensibility.  Thanks to Peter Zijlstra for fixing the lockdep
warning.  Thanks to Harvey Harrison for pointing out that the
unlikely() was unnecessary.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 10:42:34 -04:00
Stelian Pop
8d855317fc atmel_usba_udc: move endpoint declarations into platform data.
The atmel_usba_udc driver is being used by several platforms and arches
(avr32 and at91 ATM), and each platform may have different endpoint
settings.

The patch below moves the endpoint declarations into the platform
data and make the necessary adjustments for AVR32 (improved by
Haavard Skinnemoen <hskinnemoen@atmel.com>).

Signed-off-by: Stelian Pop <stelian@popies.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-04-06 17:15:08 -04:00
Christian Borntraeger
dd135ebbd2 kvm: provide kvm.h for all architecture: fixes headers_install
Currently include/linux/kvm.h is not considered by make headers_install,
because Kbuild cannot handle " unifdef-$(CONFIG_FOO) += foo.h.  This problem
was introduced by

commit fb56dbb31c
Author: Avi Kivity <avi@qumranet.com>
Date:   Sun Dec 2 10:50:06 2007 +0200

    KVM: Export include/linux/kvm.h only if $ARCH actually supports KVM

    Currently, make headers_check barfs due to <asm/kvm.h>, which <linux/kvm.h>
    includes, not existing.  Rather than add a zillion <asm/kvm.h>s, export kvm.
    only if the arch actually supports it.

    Signed-off-by: Avi Kivity <avi@qumranet.com>

which makes this an 2.6.25 regression.

One way of solving the issue is to enhance Kbuild, but Avi and David conviced
me, that changing headers_install is not the way to go.  This patch changes
the definition for linux/kvm.h to unifdef-y.

If  unifdef-y is used for linux/kvm.h "make headers_check" will fail on all
architectures without asm/kvm.h.  Therefore, this patch also provides
asm/kvm.h on all architectures.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Avi Kivity <avi@qumranet.com>
Cc: Sam Ravnborg <sam@ravnborg.org
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02 15:28:18 -07:00
Haavard Skinnemoen
bafe68034e avr32: Work around byteswap bug in gcc < 4.2
gcc versions earlier than 4.2 sign-extends the result of le16_to_cpu()
and friends when we implement __arch__swabX() using
__builtin_bswap_X(). Disable our arch-specific optimizations when those
gcc versions are being used.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-03-10 13:32:33 +01:00
Haavard Skinnemoen
e48a411fa0 AVR32: Define PAGE_SHARED
The virtual framebuffer driver needs PAGE_SHARED, which is not defined
on avr32. Define it.

Reported-by: Oliver Zander <ozander@como.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-02-13 14:44:03 +01:00
Martin Schwidefsky
2f569afd9c CONFIG_HIGHPTE vs. sub-page page tables.
Background: I've implemented 1K/2K page tables for s390.  These sub-page
page tables are required to properly support the s390 virtualization
instruction with KVM.  The SIE instruction requires that the page tables
have 256 page table entries (pte) followed by 256 page status table entries
(pgste).  The pgstes are only required if the process is using the SIE
instruction.  The pgstes are updated by the hardware and by the hypervisor
for a number of reasons, one of them is dirty and reference bit tracking.
To avoid wasting memory the standard pte table allocation should return
1K/2K (31/64 bit) and 2K/4K if the process is using SIE.

Problem: Page size on s390 is 4K, page table size is 1K or 2K.  That means
the s390 version for pte_alloc_one cannot return a pointer to a struct
page.  Trouble is that with the CONFIG_HIGHPTE feature on x86 pte_alloc_one
cannot return a pointer to a pte either, since that would require more than
32 bit for the return value of pte_alloc_one (and the pte * would not be
accessible since its not kmapped).

Solution: The only solution I found to this dilemma is a new typedef: a
pgtable_t.  For s390 pgtable_t will be a (pte *) - to be introduced with a
later patch.  For everybody else it will be a (struct page *).  The
additional problem with the initialization of the ptl lock and the
NR_PAGETABLE accounting is solved with a constructor pgtable_page_ctor and
a destructor pgtable_page_dtor.  The page table allocation and free
functions need to call these two whenever a page table page is allocated or
freed.  pmd_populate will get a pgtable_t instead of a struct page pointer.
 To get the pgtable_t back from a pmd entry that has been installed with
pmd_populate a new function pmd_pgtable is added.  It replaces the pmd_page
call in free_pte_range and apply_to_pte_range.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:42 -08:00
David Brownell
9a1e8eb1f0 Basic PWM driver for AVR32 and AT91
PWM device setup, and a simple PWM driver exposing a programming interface
giving access to each channel's full capabilities.  Note that this doesn't
support starting several channels in synch.

[hskinnemoen@atmel.com: allocate platform device dynamically]
[hskinnemoen@atmel.com: Kconfig fix]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:38 -08:00
Mike Frysinger
531d7d4256 asm-*/posix_types.h: scrub __GLIBC__
Some arches (like alpha and ia64) already have a clean posix_types.h header.
This brings all the others in line by removing all references to __GLIBC__
(and some undocumented __USE_ALL).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:34 -08:00
David Howells
922a70d327 aout: move STACK_TOP[_MAX] to asm/processor.h
Move STACK_TOP[_MAX] out of asm/a.out.h and into asm/processor.h as they're
required whether or not A.OUT format is available.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:29 -08:00
Mathieu Desnoyers
5e86c11d3e Add cmpxchg_local to avr32
Use the new generic cmpxchg_local (disables interrupt) for 8, 16 and 64 bits
cmpxchg_local. Use the __cmpxchg_u32 primitive for 32 bits cmpxchg_local.

Note that cmpxchg only uses the __cmpxchg_u32 or __cmpxchg_u64 and will cause
a linker error if called with 8 or 16 bits argument.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:31 -08:00
H. Peter Anvin
6e16d89bcd Sanitize the type of struct user.u_ar0
struct user.u_ar0 is defined to contain a pointer offset on all
architectures in which it is defined (all architectures which define an
a.out format except SPARC.) However, it has a pointer type in the headers,
which is pointless -- <asm/user.h> is not exported to userspace, and it
just makes the code messy.

Redefine the field as "unsigned long" (which is the same size as a pointer
on all Linux architectures) and change the setting code to user offsetof()
instead of hand-coded arithmetic.

Cc: Linux Arch Mailing List <linux-arch@vger.kernel.org>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Håvard Skinnemoen <hskinnemoen@atmel.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:30 -08:00
Kirill A. Shutemov
516c25a86f Cleanup asm/{elf,page,user}.h: #ifdef __KERNEL__ is no longer needed
asm/elf.h, asm/page.h and asm/user.h don't export to userspace now, so we can
drop #ifdef __KERNEL__ for them.

[k.shutemov@gmail.com: remove #ifdef __KERNEL_]
Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:30 -08:00
Jeff Dike
5ab24c79af Fix __const_udelay declaration and definition mismatches
The declaration and implementation of __const_udelay use different
names for the parameter on a number of architectures:

include/asm-avr32/delay.h:15:extern void __const_udelay(unsigned long usecs);
arch/avr32/lib/delay.c:39:inline void __const_udelay(unsigned long xloops)

include/asm-sh/delay.h:15:extern void __const_udelay(unsigned long usecs);
arch/sh/lib/delay.c:22:inline void __const_udelay(unsigned long xloops)

include/asm-m32r/delay.h:15:extern void __const_udelay(unsigned long usecs);
arch/m32r/lib/delay.c:58:void __const_udelay(unsigned long xloops)

include/asm-x86/delay.h:16:extern void __const_udelay(unsigned long usecs);
arch/x86/lib/delay_32.c:82:inline void __const_udelay(unsigned long xloops)
arch/x86/lib/delay_64.c:46:inline void __const_udelay(unsigned long xloops)

The units of the parameter isn't usecs, so that name is definitely
wrong.  It's also not exactly loops, so I suppose xloops is an OK
name.

This patch changes these names from usecs to xloops.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:06 -08:00
Andrew Morton
941e492bdb read_current_timer() cleanups
- All implementations can be __devinit

- The function prototypes were in asm/timex.h but they all must be the same,
  so create a single declaration in linux/timex.h.

- uninline the sparc64 version to match the other architectures

- Don't bother #defining ARCH_HAS_READ_CURRENT_TIMER to a particular value.

[ezk@cs.sunysb.edu: fix build]
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:02 -08:00
Haavard Skinnemoen
46a56c5a02 Fix timerfd breakage on avr32
Hmm. Someone removed the timerfd() syscall...

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 14:37:15 -08:00
Benjamin Herrenschmidt
5e5419734c add mm argument to pte/pmd/pud/pgd_free
(with Martin Schwidefsky <schwidefsky@de.ibm.com>)

The pgd/pud/pmd/pte page table allocation functions get a mm_struct pointer as
first argument.  The free functions do not get the mm_struct argument.  This
is 1) asymmetrical and 2) to do mm related page table allocations the mm
argument is needed on the free function as well.

[kamalesh@linux.vnet.ibm.com: i386 fix]
[akpm@linux-foundation.org: coding-syle fixes]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:18 -08:00
David Brownell
b98348bdd0 gpiolib: avr32 at32ap platform support
Teach AVR32 to use the "GPIO Library" when exposing its GPIOs, so that signals
on external chips (like GPIO expanders) can easily be used.

This mostly reorganizes some existing logic, with two minor changes in
behavior:

 - The PSR registers are used instead of the previous "gpio_mask" values,
   matching AT91 behavior and removing some duplication between that role
   and that of "pinmux_mask".

 - NR_IRQs grew to acommodate a bank of external GPIOs.  Eventually this
   number should probably become a board-specific config option.

There's a debugfs dump of status for the built-in GPIOs, showing which pins
have deglitching, pullups, or open drain drive enabled, as well as the ID
string used when requesting each IRQ.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:13 -08:00
Laszlo Attila Toth
4a19ec5800 [NET]: Introducing socket mark socket option.
A userspace program may wish to set the mark for each packets its send
without using the netfilter MARK target. Changing the mark can be used
for mark based routing without netfilter or for packet filtering.

It requires CAP_NET_ADMIN capability.

Signed-off-by: Laszlo Attila Toth <panther@balabit.hu>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:19 -08:00
Adrian Bunk
3ff6eecca4 remove __attribute_used__
Remove the deprecated __attribute_used__.

[Introduce __section in a few places to silence checkpatch /sam]

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Andrew Victor
2b3b3516b6 [ARM] 4764/1: [AT91] AT91CAP9 core support
Add support for Atmel's AT91CAP9 Customizable Microcontroller family.
  <http://www.atmel.com/products/AT91CAP/Default.asp>

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:01:13 +00:00
Haavard Skinnemoen
e7ba176b47 [AVR32] NMI debugging
Change the NMI handler to use the die notifier chain to signal anyone
who cares. Add a simple "nmi debugger" which hooks into this chain and
that may dump registers, task state, etc. when it happens.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-01-25 08:31:43 +01:00