Commit Graph

307 Commits

Author SHA1 Message Date
Mike Christie
e6f3b63f50 [SCSI] iscsi: rm channel usage from iscsi
I do not remember what I was thinking when we added the channel
as a argument to the session create function. It was probably
due to too much cut and paste work from the FC transport class.

The channel is meaningless for iscsi drivers so this patch drops
its usage everywhere in the iscsi related code.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29 11:08:31 -04:00
Mike Christie
a54a52caad [SCSI] iscsi: fixup set/get param functions
Reduce duplication in the software iscsi_transport modules by
adding a libiscsi function to handle the common grunt work.

This also has the drivers return specifc -EXXX values for different
errors so userspace can finally handle them in a sane way.

Also just pass the sysfs buffers to the drivers so HW iscsi can
get/set its string values, like targetname, and initiatorname.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29 11:07:14 -04:00
Mike Christie
01cb225dad [SCSI] iscsi: add target discvery event to transport class
Patch from david.somayajulu@qlogic.com:

Add target discovery event. We may have a setup where the iscsi traffic
is on a different netowrk than the other network traffic. In this case
we will want to do discovery though the iscsi card. This patch adds
a event to the transport class that can be used by hw iscsi cards that
support this.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29 11:06:59 -04:00
James Bottomley
65c92b09ac [SCSI] scsi_transport_sas: introduce a sas_port entity
this patch introduces a port object, separates out ports and phys,
with ports becoming the primary objects of the tree.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 12:40:54 -04:00
James Smart
d7a1bb0a04 [SCSI] Block I/O while SG reset operation in progress - the midlayer patch
The scsi midlayer portion of the patch

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27 10:48:11 -05:00
Luben Tuikov
03aba2f795 [SCSI] sd/scsi_lib simplify sd_rw_intr and scsi_io_completion
This patch simplifies "good_bytes" computation in sd_rw_intr().
sd: "good_bytes" computation is always done in terms of the resolution
of the device's medium, since after that it is the number of good bytes
we pass around and other layers/contexts (as opposed ot sd) can translate
that to their own resolution (block layer:512).  It also makes
scsi_io_completion() processing more straightforward, eliminating the
3rd argument to the function.

It also fixes a couple of bugs like not checking return value,
using "break" instead of "return;", etc.

I've been running with this patch for some time now on a
test (do-it-all) system.

Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 10:00:20 -05:00
Jeff Garzik
71d530cd1b Merge branch 'master' into upstream
Conflicts:

	drivers/scsi/libata-core.c
	drivers/scsi/libata-scsi.c
	include/linux/pci_ids.h
2006-06-22 22:11:56 -04:00
Linus Torvalds
28e4b22495 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (85 commits)
  [SCSI] 53c700: remove reliance on deprecated cmnd fields
  [SCSI] hptiop: don't use cmnd->bufflen
  [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver
  [SCSI] aacraid: small misc. cleanups
  [SCSI] aacraid: Update supported product information
  [SCSI] aacraid: Fix return code interpretation
  [SCSI] scsi_transport_sas: fix panic in sas_free_rphy
  [SCSI] remove RQ_SCSI_* flags
  [SCSI] remove scsi_request infrastructure
  [SCSI] mptfusion: change driver revision to 3.03.10
  [SCSI] mptfc: abort of board reset leaves port dead requiring reboot
  [SCSI] mptfc: fix fibre channel infinite request/response loop
  [SCSI] mptfc: set fibre channel fw target missing timers to one second
  [SCSI] mptfusion: move fc event/reset handling to mptfc
  [SCSI] spi transport: don't allow dt to be set on SE or HVD buses
  [SCSI] aic7xxx: expose the bus setting to sysfs
  [SCSI] scsi: remove Documentation/scsi/cpqfc.txt
  [SCSI] drivers/scsi: Use ARRAY_SIZE macro
  [SCSI] Remove last page_address from dc395x.c
  [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver
  ...

Fixed up conflicts in drivers/message/fusion/mptbase.c manually (due to
the sparc interrupt cleanups)
2006-06-21 11:18:25 -07:00
Linus Torvalds
cee4cca740 Merge git://git.infradead.org/hdrcleanup-2.6
* git://git.infradead.org/hdrcleanup-2.6: (63 commits)
  [S390] __FD_foo definitions.
  Switch to __s32 types in joystick.h instead of C99 types for consistency.
  Add <sys/types.h> to headers included for userspace in <linux/input.h>
  Move inclusion of <linux/compat.h> out of user scope in asm-x86_64/mtrr.h
  Remove struct fddi_statistics from user view in <linux/if_fddi.h>
  Move user-visible parts of drivers/s390/crypto/z90crypt.h to include/asm-s390
  Revert include/media changes: Mauro says those ioctls are only used in-kernel(!)
  Include <linux/types.h> and use __uXX types in <linux/cramfs_fs.h>
  Use __uXX types in <linux/i2o_dev.h>, include <linux/ioctl.h> too
  Remove private struct dx_hash_info from public view in <linux/ext3_fs.h>
  Include <linux/types.h> and use __uXX types in <linux/affs_hardblocks.h>
  Use __uXX types in <linux/divert.h> for struct divert_blk et al.
  Use __u32 for elf_addr_t in <asm-powerpc/elf.h>, not u32. It's user-visible.
  Remove PPP_FCS from user view in <linux/ppp_defs.h>, remove __P mess entirely
  Use __uXX types in user-visible structures in <linux/nbd.h>
  Don't use 'u32' in user-visible struct ip_conntrack_old_tuple.
  Use __uXX types for S390 DASD volume label definitions which are user-visible
  S390 BIODASDREADCMB ioctl should use __u64 not u64 type.
  Remove unneeded inclusion of <linux/time.h> from <linux/ufs_fs.h>
  Fix private integer types used in V4L2 ioctls.
  ...

Manually resolve conflict in include/linux/mtd/physmap.h
2006-06-20 15:10:08 -07:00
David Woodhouse
8555255f0b Add generic Kbuild files for 'make headers_install'
This adds the Kbuild files listing the files which are to be installed by
the 'headers_install' make target, in generic directories.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-18 12:14:01 +01:00
Ramachandra K
73c0996b1c [SCSI] srp.h: Add I/O Class values
Add enum values for I/O Class values from rev. 10 and rev. 16a SRP
drafts.  The values are used to detect targets that implement obsolete
revisions of SRP, so that the initiator can use the old format for
port identifier when connecting to them.

Signed-off-by: Ramachandra K <rkuchimanchi@silverstorm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17 20:37:38 -07:00
Christoph Hellwig
beb4048750 [SCSI] remove scsi_request infrastructure
With Achim patch the last user (gdth) is switched away from scsi_request
so we an kill it now.  Also disables some code in i2o_scsi that was
broken since the sg driver stopped using scsi_requests.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10 16:24:40 -05:00
James Bottomley
f0cd91a68a Merge ../linux-2.6 2006-06-10 13:47:26 -05:00
Mike Christie
3219e52941 [SCSI] iscsi: fix writepsace race
We can race and misset the suspend bit if iscsi_write_space is
called then iscsi_send returns with a failure indicating
there is no space.

To handle this this patch returns a error upwards allowing xmitworker
to decide if we need to try and transmit again. For the no
write space case xmitworker will not retry, and instead
let iscsi_write_space queue it back up if needed (this relies
on the work queue code to properly requeue us if needed).

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-05 19:12:25 -04:00
Mike Christie
67a611149b [SCSI] iscsi: don't switch states when just cleaning up
If recovery failed or we are in recovery only overwrite the state
if we are going to terminate the session or if we logged back in.

STOP_CONN_SUSPEND and conn_cnt are not used. We only support
a single connection session ATM, so cleanup that code while
we are working around it.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-05 19:10:45 -04:00
David Woodhouse
66643de455 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	include/asm-powerpc/unistd.h
	include/asm-sparc/unistd.h
	include/asm-sparc64/unistd.h

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-24 09:22:21 +01:00
Mike Christie
e0ecae8da2 [SCSI] iscsi: update version
update version

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:36:38 -05:00
Mike Christie
656cffc95f [SCSI] iscsi: fix command requeues during iscsi recovery
Do not flush queues then block session. This will cause commands
to needlessly swing around on us and remove goofy
recovery_failed field and replace with state value.

And do not start recovery from within the host reset function.
This causeis too many problems becuase open-iscsi was desinged to
call out to userspace then have userpscae decide if we should
go into recovery or kill the session.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20 09:36:17 -05:00
Tejun Heo
f8bbfc247e [PATCH] SCSI: make scsi_implement_eh() generic API for SCSI transports
libata implemented a feature to schedule EH without an associated EH
by manipulating shost->host_eh_scheduled in ata_scsi_schedule_eh()
directly.  Move this function to scsi_error.c and rename it to
scsi_schedule_eh().  It is now an exported API for SCSI transports and
exported via new header file drivers/scsi/scsi_transport_api.h

This patch also de-export scsi_eh_wakeup() which was exported
specifically for ata_scsi_schedule_eh().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-20 00:39:08 -04:00
Jeff Garzik
efa6e7e9d4 Merge branch 'for-jeff' of git://htj.dyndns.org/libata-tj into tejun-merge 2006-05-15 11:26:53 -04:00
Tejun Heo
ee7863bc68 [PATCH] SCSI: implement shost->host_eh_scheduled
libata needs to invoke EH without scmd.  This patch adds
shost->host_eh_scheduled to implement such behavior.

Currently the only user of this feature is libata and no general
interface is defined.  This patch simply adds handling for
host_eh_scheduled where needed and exports scsi_eh_wakeup() to
modules.  The rest is upto libata.  This is the result of the
following discussion.

http://thread.gmane.org/gmane.linux.scsi/23853/focus=9760

In short, SCSI host is not supposed to know about exceptions unrelated
to specific device or command.  Such exceptions should be handled by
transport layer proper.  However, the distinction is not essential to
ATA and libata is planning to depart from SCSI, so, for the time
being, libata will be using SCSI EH to handle such exceptions.

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:57:20 +09:00
Luben Tuikov
89f48c4d67 [PATCH] SCSI: Introduce scsi_req_abort_cmd (REPOST)
Introduce scsi_req_abort_cmd(struct scsi_cmnd *).
This function requests that SCSI Core start recovery for the
command by deleting the timer and adding the command to the eh
queue.  It can be called by either LLDDs or SCSI Core.  LLDDs who
implement their own error recovery MAY ignore the timeout event if
they generated scsi_req_abort_cmd.

First post:
http://marc.theaimsgroup.com/?l=linux-scsi&m=113833937421677&w=2

Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 20:57:18 +09:00
Mike Christie
8d2860b3c3 [SCSI] iscsi: increment expstatsn during login
debugged by Ming and Rohan:

The problem Ming and Rohan debugged was that during a normal session
login, open-iscsi is not incrementing the exp_statsn counter. It was
stuck at zero. From the RFC, it looks like if the login response PDU has
a successful status then we should be incrementing that value. Also from
the RFC, it looks like if when we drop a connection then reconnect, we
should be using the exp_statsn from the old connection in the next
relogin attempt.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-10 10:13:21 -05:00
Or Gerlitz
be2df72e7e [SCSI] iscsi: align printks
align printk output

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-10 10:12:52 -05:00
Or Gerlitz
264faaaa12 [SCSI] iscsi: add transport end point callbacks
add transport end point callbacks so iscsi drivers that cannot connect
from userspace, like iscsi tcp, using sockets do not have to
implement their own socket infrastructure.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-10 10:11:38 -05:00
Roland Dreier
ec448a0a36 [SCSI] srp.h: avoid padding of structs
Several structs in <scsi/srp.h> get padded to a multiple of 8 bytes on
64-bit architectures and end up with a size that does not match the
definition in the SRP spec:

                                     SRP spec     64-bit
    sizeof (struct indirect_buf)        20          24
    sizeof (struct srp_login_rsp)       52          56
    sizeof (struct srp_rsp)             36          40

Fix this by adding __attribute__((packed)) to the offending structs.

Problem pointed out by Arne Redlich <arne.redlich@xiranet.com>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-28 10:14:15 -05:00
David Woodhouse
62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00
Guennadi Liakhovetski
cdb8c2a6d8 [SCSI] dc395x: dynamically map scatter-gather for PIO
The current dc395x driver uses PIO to transfer up to 4 bytes which do not
get transferred by DMA (under unclear circumstances). For this the driver
uses page_address() which is broken on highmem. Apart from this the
actual calculation of the virtual address is wrong (even without highmem).
So, e.g., for reading it reads bytes from the driver to a wrong address
and returns wrong data, I guess, for writing it would just output random
data to the device.

The proper fix, as suggested by many, is to dynamically map data using
kmap_atomic(page, KM_BIO_SRC_IRQ) / kunmap_atomic(virt). The reason why it
has not been done until now, although I've done some preliminary patches
more than a year ago was that nobody interested in fixing this problem was
able to reliably reproduce it. Now it changed - with the help from
Sebastian Frei (CC'ed) I was able to trigger the PIO path. Thus, I was
also able to test and debug it.

There are 4 cases when PIO is used in dc395x - data-in / -out with and
without scatter-gather. I was able to reproduce and test only data-in with
and without SG. So, the data-out path is still untested, but it is also
somewhat simpler than the data-in. Fredrik Roubert (also CC'ed) also had
PIO triggering on his system, and in his case it was data-out without SG.
It would be great if he could test the attached patch on his system, but
even if he cannot, I would still request to apply the patch and just wait
if anybody cries...

Implementation: I put 2 new functions in scsi_lib.c and their declarations
in scsi_cmnd.h. I exported them without _GPL, although, I don't feel
strongly about that - not many drivers are likely to use them. But there
is at least one more - I want to use them in tmscsim.c. Whether these are
the right files for the functions and their declarations - not sure
either. Actually, they are not scsi-specific, so, might go somewhere
around other scattergather magic? They are not platform specific either,
and most SG functions are defined under arch/*/... As these issues were
discussed previously there were some more routines suggested to manipulate
scattergather buffers, I think, some of them were needed around
crypto code... So, might be a common place reasonable, like
lib/scattergather.c? I am open here.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14 16:45:27 -05:00
James Bottomley
84d891d672 Merge ../scsi-rc-fixes-2.6
Conflicts:

	include/scsi/scsi_devinfo.h

Same number for two BLIST flags:  BLIST_MAX_512 and BLIST_ATTACH_PQ3

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14 15:47:45 -05:00
Mike Christie
7996a778ff [SCSI] iscsi: add libiscsi
There is a lot of code duplcited between iscsi_tcp
and the upcoming iscsi_iser driver. This patch puts
the duplicated code in a lib. There is more code
to move around but this takes care of the
basics. For iscsi_offload if they use the lib we will
probably move some things around. For example in the
queuecommand we will not assume that the LLD wants
to do queue_work, but it is better to handle that
later when we know for sure what iscsi_offload looks
like (we could probably do this for iscsi_iser though to).

Ideally I would like to get the iscsi_transports modules
to a place where all they really have to do is put data
on the wire, but how to do that will hopefully be more clear
when we see other modules like iscsi_offload. Or maybe
iscsi_offload will not use the lib and it will just be
iscsi_iser and iscsi_tcp and maybe the iscsi_tcp_tgt if that
is allowed in mainline.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14 14:09:00 -05:00
Mike Christie
30a6c65236 [SCSI] iscsi: fix up iscsi eh
The current iscsi_tcp eh is not nicely setup for dm-multipath
and performs some extra task management functions when they
are not needed.

The attached patch:

- Fixes the TMF issues. If a session is rebuilt
then we do not send aborts.

- Fixes the problem where if the host reset fired, we would
return SUCCESS even though we had not really done anything
yet. This ends up causing problem with scsi_error.c's TUR.

- If someone has turned on the userspace nop daemon code to try
and detect network problems before the scsi command timeout
we can now drop and clean up the session before the scsi command
timesout and fires the eh speeding up the time it takes for a
command to go from one patch to another. For network problems
we fail the command with DID_BUS_BUSY so if failfast is set
scsi_decide_disposition fails the command up to dm for it to
try on another path.

- And we had to add some basic iscsi session block code. Previously
if we were trying to repair a session we would retrun a MLQUEUE code
in the queuecommand. This worked but it was not the most efficient
or pretty thing to do since it would take a while to relogin
to the target. For iscsi_tcp/open-iscsi a lot of the iscsi error handler
is in userspace the block code is pretty bare. We will be
adding to that for qla4xxx.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14 14:05:09 -05:00
Mike Christie
fd7255f51a [SCSI] iscsi: add sysfs attrs for uspace sync up
For iscsi boot when going from initramfs to the real root we
need to stop the userpsace iscsi daemon. To later restart it
iscsid needs to be able to rebuild itself and part of that
process is matching a session running the kernel with the
iscsid representation. To do this the attached patch
adds several required iscsi values. If the LLD does not provide
them becuase, login is done in userspace, then the transport
class and userspace set ths up for the LLD.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14 14:03:41 -05:00
Mike Christie
b5c7a12dc2 [SCSI] iscsi: rm kernel iscsi handles usage for session and connection
from hare@suse.de and michaelc@cs.wisc.edu

hw iscsi like qla4xxx does not allocate a host per session and
for userspace it is difficult to restart iscsid using the
"iscsi handles" for the session and connection, so this
patch just has the class or userspace allocate the id for
the session and connection.

Note: this breaks userspace and requires users to upgrade to the newest
open-iscsi tools. Sorry about his but open-iscsi is still too new to
say we have a stable user-kernel api and we were not good nough
designers to know that other hw iscsi drivers and iscsid itself would
need such changes. Actually we sorta did but at the time we did not
have the HW available to us so we could only guess.

Luckily, the only tools hooking into the class are the open-iscsi ones
or other tools like iscsitart hook into the open-iscsi engine from
userspace or prgroams like anaconda call our tools so they are not affected.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14 14:02:43 -05:00
Kurt Garloff
13f7e5acc8 [SCSI] BLIST_ATTACH_PQ3 flags
Some devices report a peripheral qualifier of 3 for LUN 0; with the original
code, we would still try a REPORT_LUNS scan (if SCSI level is >= 3 or if we
have the BLIST_REPORTLUNS2 passed in), but NOT any sequential scan.
Also, the device at LUN 0 (which is not connected according to the PQ) is not
registered with the OS.

Unfortunately, SANs exist that are SCSI-2 and do NOT support REPORT_LUNS, but
report a unknown device with PQ 3 on LUN 0. We still need to scan them, and
most probably we even need BLIST_SPARSELUN (and BLIST_LARGELUN). See the bug
reference for an infamous example.

This is patch 3/3:
3. Implement the blacklist flag BLIST_ATTACH_PQ3 that makes the scsi
   scanning code register PQ3 devices and continues scanning; only sg
   will attach thanks to scsi_bus_match().

Signed-off-by: Kurt Garloff <garloff@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-14 13:56:56 -05:00
James Smart
aedf349773 [SCSI] FC transport: fixes for workq deadlocks
As previously reported via Michael Reed, the FC transport took a hit
in 2.6.15 (perhaps a little earlier) when we solved a recursion error.
There are 2 deadlocks occurring:
- With scan and the delete items sharing the same workq, flushing the
  workq for the delete code was getting it stalled behind a very long
  running scan code path.
- There's a deadlock where scsi_remove_target() has to sit behind
  scsi_scan_target() due to contention over the scan_lock().

This patch resolves the 1st deadlock and significantly reduces the
odds of the second. So far, we have only replicated the 2nd deadlock
on a highly-parallel SMP system. More on the 2nd deadlock in a following
email.

This patch reworks the transport to:
- Only use the scsi host workq for scanning
- Use 2 other workq's internally. One for deletions, the other for
  scheduled deletions. Originally, we tried this with a single workq,
  but the occassional flushes of the scheduled queues was hitting the
  second deadlock with a slightly higher frequency. In the future, we'll
  look at the LLDD's and the transport to see if we can get rid of this
  extra overhead.
- When moving to the other workq's we tightened up some object states
  and some lock handling.
- Properly syncs adds/deletes
- minor code cleanups
  - directly reference fc_host_attrs, rather than through attribute
    macros
  - flush the right workq on delayed work cancel failures.

Large kudos to Michael Reed who has been working this issue for the last
month.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13 13:25:16 -05:00
James Bottomley
4d7db04a7a [SCSI] add SCSI_UNKNOWN and LUN transfer limit restrictions
Original From: Ingo Flaschberger <if@xip.at>

To support the RA4100 array from Compaq.

This patch now correctly handles SCSI_UNKNOWN types with regard to
BLIST_REPORTLUNS2 (allow it) and cdb[1] LUN inclusion (don't).

It also allows a BLIST_MAX_512 flag to restrict the maximum transfer
length to 512 blocks (apparently this is an RA4100 problem).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13 10:13:31 -05:00
Christoph Hellwig
21b2f0c803 [SCSI] unify SCSI_IOCTL_SEND_COMMAND implementations
We currently have two implementations of this obsolete ioctl, one in
the block layer and one in the scsi code.  Both of them have drawbacks.

This patch kills the scsi layer version after updating the block version
with the missing bits:

 - argument checking
 - use scatterlist I/O
 - set number of retries based on the submitted command

This is the last user of non-S/G I/O except for the gdth driver, so
getting this in ASAP and through the scsi tree would be nie to kill
the non-S/G I/O path.  Jens, what do you think about adding a check
for non-S/G I/O in the midlayer?

Thanks to  Or Gerlitz for testing this patch.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13 10:13:15 -05:00
Christoph Hellwig
9227c33de8 [PATCH] move ->eh_strategy_handler to the transport class
Overriding the whole EH code is a per-transport, not per-host thing.
Move ->eh_strategy_handler to the transport class, same as
->eh_timed_out.

Downside is that scsi_host_alloc can't check for the total lack of EH
anymore, but the transition period from old EH where we needed it is
long gone already.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-10 14:15:47 -04:00
Nigel Cunningham
082776e4be [PATCH] Make libata not powerdown drivers on PM_EVENT_FREEZE.
At the moment libata doesn't pass pm_message_t down ata_device_suspend.
This causes drives to be powered down when we just want a freeze,
causing unnecessary wear and tear. This patch gets pm_message_t passed
down so that it can be used to determine whether to power down the
drive.

Signed-off-by: Nigel Cunningham <nigel@suspend2.net>

 drivers/scsi/libata-core.c |    5 +++--
 drivers/scsi/libata-scsi.c |    4 ++--
 drivers/scsi/scsi_sysfs.c  |    2 +-
 include/linux/libata.h     |    4 ++--
 include/scsi/scsi_host.h   |    2 +-
 5 files changed, 9 insertions(+), 8 deletions(-)
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 09:51:36 -05:00
James Bottomley
d04cdb6421 Merge ../linux-2.6 2006-03-21 13:05:45 -06:00
James Bottomley
2f8600dff2 [SCSI] eliminate rphy allocation in favour of expander/end device allocation
This allows the removal of the contained flag and also does a bit of
class renaming (sas_rphy->sas_device).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-19 10:21:16 -06:00
James Bottomley
5baba830e9 [SCSI] add scsi_mode_select to scsi_lib.c
This complements the scsi_mode_sense() function

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-19 10:19:14 -06:00
James Bottomley
e28482c5b2 [SCSI] add scsi_reprobe_device
Original from Christoph Hellwig and Eric Moore.  This version exports
the scsi_reprobe_device() function as an inline.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 14:24:55 -06:00
James Bottomley
79cb1819e2 [SCSI] add preliminary expander support to the sas transport class
This patch makes expanders appear as labelled objects with properties in
the SAS tree.

I've also modified the phy code to make expander phys appear labelled by
host number, expander number and phy index.

So, for my current config, you see something like this in sysfs:

/sys/class/scsi_host/host1/device/phy-1:4/expander-1:0/phy-1-0:12/rphy-1:0-12/target1:0:1

And the expander properties are:

jejb@sparkweed> cd /sys/class/sas_expander/expander-1\:0/
jejb@sparkweed> for f in *; do echo -n $f ": "; cat $f; done
component_id : 29024
component_revision_id : 4
component_vendor_id : VITESSE
device : cat: device: Is a directory
level : 0
product_id : VSC7160 Eval Brd
product_rev : 4
uevent : cat: uevent: Permission denied
vendor_id : VITESSE

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14 12:36:19 -06:00
James Smart
c829c39416 [SCSI] FC transport : Avoid device offline cases by stalling aborts until device unblocked
This moves the eh_timed_out functionality from the scsi_host_template
to the transport_template. Given that this is now a transport function,
the EH_RESET_TIMER case no longer caps the timer reschedulings. The
transport guarantees that this is not an infinite condition.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-13 08:58:58 -06:00
James Bottomley
42ab03609c [PATCH] convert aic94xx over to using the sas transport end device
Begin introducing the concept of sas remote devices that have an rphy
embedded.  The first one (this) is a simple end device.  All that an
end device really does is have port mode page parameters contained.
The next and more complex piece will be expander remote devices.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06 09:43:17 -06:00
James Bottomley
7e6dff62da [SCSI] add 6.0 Gbit phy definitions to the sas transport class
I don't think these exist in silicon yet, but the aic94xx driver has a
register setting for them.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-02 22:36:58 -06:00
James Bottomley
ffedb45225 [SCSI] fix scsi process problems and clean up the target reap issues
In order to use the new execute_in_process_context() API, you have to
provide it with the work storage, which I do in SCSI in scsi_device and
scsi_target, but which also means that we can no longer queue up the
target reaps, so instead I moved the target to a state model which
allows target_alloc to detect if we've received a dying target and wait
for it to be gone.  Hopefully, this should also solve the target
namespace race.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27 23:37:45 -06:00
Alan Stern
1bfc5d9d5e [SCSI] Recognize missing LUNs for non-standard devices
Some non-standard SCSI targets or protocols, such as USB UFI, report "no
LUN present" by setting the Peripheral Device Type to 0x1f and the
Peripheral Qualifier to 0 (not 3 as the standard requires) in the INQUIRY
response.  This patch (as650b) adds a new target flag and code to
accomodate such targets.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27 23:24:09 -06:00
Christoph Hellwig
a012564136 [SCSI] sas: add support for enclosure and bad ID rphy attributes
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27 22:55:13 -06:00
Matthew Wilcox
6ea3c0b2da [SCSI] Add spi_populate_*_msg functions
Introduce new helpers:
 - spi_populate_width_msg()
 - spi_populate_sync_msg()
 - spi_populate_ppr_msg()

and use them in drivers which already enable the SPI transport.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27 22:55:09 -06:00
Greg KH
5e3c34c1e9 [SCSI] Remove devfs support from the SCSI subsystem
As devfs has been disabled from the kernel tree for a number of months
now (5 to be exact), here's a patch against 2.6.16-rc1-git1 that removes
support for it from the SCSI subsystem.

The patch also removes the scsi_disk devfs_name field as it's no longer
needed.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27 22:55:04 -06:00
Matthew Wilcox
c67a848c35 [SCSI] Neaten comments in scsi_cmnd.h
Wrap these two comments at 80 columns

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27 22:55:02 -06:00
Jeff Garzik
5b2ffed906 Merge branch 'master' 2006-02-20 02:16:23 -05:00
James Bottomley
faead26d7a [PATCH] add scsi_execute_in_process_context() API
We have several points in the SCSI stack (primarily for our device
functions) where we need to guarantee process context, but (given the
place where the last reference was released) we cannot guarantee this.

This API gets around the issue by executing the function directly if
the caller has process context, but scheduling a workqueue to execute
in process context if the caller doesn't have it.  Unfortunately, it
requires memory allocation in interrupt context, but it's better than
what we have previously.  The true solution will require a bit of
re-engineering, so isn't appropriate for 2.6.16.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-14 11:14:26 -06:00
Mike Christie
7b7232f3fb [SCSI] iscsi update: cleanup iscsi class interface
From:
michaelc@cs.wisc.edu
fujita.tomonori@lab.ntt.co.jp
da-x@monatomic.org

and err path fixup from:
ogerlitz@voltaire.com

This patch cleans up that interface by having the lld and class
pass a iscsi_cls_session or iscsi_cls_conn between each other when
the function is used by HW and SW iscsi llds. This way the lld
does not have to remember if it has to send a handle or pointer
and a handle or pointer to connection, session or host.

This also has the class verify the session handle that gets passed from
userspace instead of using the pointer passed into the kernel directly.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04 16:17:03 -06:00
Jeff Garzik
18ee361004 Merge branch 'master' 2006-02-02 01:12:54 -05:00
Linus Torvalds
e0ae23550f Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 2006-01-31 13:12:41 -08:00
Tejun Heo
041c5fc33c [PATCH] SCSI: export scsi_eh_finish_cmd() and scsi_eh_flush_done_q()
Export two SCSI EH command handling functions.  To be used by libata EH.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26 22:36:28 -05:00
brking@us.ibm.com
bb1d1073a1 [SCSI] Prevent scsi_execute_async from guessing cdb length
When the scsi_execute_async interface was added it ended up reducing
the flexibility of userspace to send arbitrary scsi commands through
sg using SG_IO. The SG_IO interface allows userspace to specify the
CDB length. This is now ignored in scsi_execute_async and it is
guessed using the COMMAND_SIZE macro, which is not always correct,
particularly for vendor specific commands. This patch adds a cmd_len
parameter to the scsi_execute_async interface to allow the caller
to specify the length of the CDB.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-26 15:13:50 -05:00
Tetsuo Takata
dfcd77d16b [SCSI] Remove host template ordered_flush variable
After the recent overhaul of the block layer the variable
"ordered_flush" is no longer used.

Signed-off-by: Tetsuo Takata <takatatt@intellilink.co.jp>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-25 11:12:40 +01:00
Andrew Morton
c8d338c8db [PATCH] scsi_transport_spi build fix
On alpha:

In file included from drivers/scsi/sym53c8xx_2/sym_glue.h:59,
                 from drivers/scsi/sym53c8xx_2/sym_fw.c:40:
include/scsi/scsi_transport_spi.h:57: error: field `dv_mutex' has incomplete type

Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:16 -08:00
Mike Christie
7b8631b53b [SCSI] iscsi: seperate iscsi interface from setup functions
This is the second version of the patch to address Christoph's comments.
Instead of doing the lib, I just kept everything in scsi_trnapsort_iscsi.c
like the FC and SPI class. This was becuase the driver model and sysfs
class is tied to the session and connection setup so separating did not
buy very much at this time.

The reason for this patch was becuase HW iscsi LLDs like qla4xxx cannot
use the iscsi class becuase the scsi_host was tied to the interface and
class code. This patch just seperates the session from scsi host so
that LLDs that allocate the host per some resource like pci device
can still use the class.

This is also fixes a couple refcount bugs that can be triggered
when users have a sysfs file open, close the session, then
read or write to the file.

Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:20 -06:00
Christoph Hellwig
e02f3f5922 [SCSI] remove target parent limitiation
When James Smart fixed the issue of the userspace scan atributes
crashing the system with the FC transport class he added a patch to
let the transport class check if the parent is valid for a given
transport class.

When adding support for the integrated raid of fusion sas devices
we ran into a problem with that, as it didn't allow adding virtual
raid volumes without the transport class knowing about it.

So this patch adds a user_scan attribute instead, that takes over from
scsi_scan_host_selected if the transport class sets it and thus lets
the transport class control the user-initiated scanning.  As this
plugs the hole about user-initiated scanning the target_parent hook
goes away and we rely on callers of the scanning routines to do
something sensible.

For SAS this meant I had to switch from a spinlock to a mutex to
synchronize the topology linked lists, in FC they were completely
unsynchronized which seems wrong.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:05 -06:00
Jes Sorensen
d158d26167 [SCSI] sem2mutex: scsi_transport_spi.c
Convert the SCSI transport class code to use a mutex rather than a
semaphore.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:01 -06:00
Andreas Herrmann
6b7281d0a0 [SCSI] fc transport: add permanent_port_name fc_host attribute
Add fc_host attribute permanent_port_name which is
used to show the port name of the primary port -
the port that initially logged into the fabric.

For a virtual port (registered via the primary port with
FDISC command) it is useful to know not only its (virtual)
port name but also the permanent port name.

Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:54:48 -06:00
Christoph Hellwig
776b23a036 [SCSI] always handle REQ_BLOCK_PC requests in common code
LLDDs should never see REQ_BLOCK_PC requests, we can handle them just
fine in the core code.  There is a small behaviour change in that some
check in sr's rw_intr are bypassed, but I consider the old behaviour
a bug.

Mike found this cleanup opportunity and provdided early patches, so all
the credit goes to him, even if I redid the patches from scratch beause
that was easier than forward-porting the old patches.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:54:45 -06:00
Arjan van de Ven
0b95067238 [SCSI] turn most scsi semaphores into mutexes
the scsi layer is using semaphores in a mutex way, this patch converts
these into using mutexes instead

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-12 11:53:11 -06:00
Linus Torvalds
d99cf9d679 Merge branch 'post-2.6.15' of git://brick.kernel.dk/data/git/linux-2.6-block
Manual fixup for merge with Jens' "Suspend support for libata", commit
ID 9b84754866.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 09:01:25 -08:00
Jens Axboe
9b84754866 [PATCH] Suspend support for libata
This patch adds suspend patch to libata, and ata_piix in particular. For
most low level drivers, they should just need to add the 4 hooks to
work. As I can only test ata_piix, I didn't enable it for more
though.

Suspend support is the single most important feature on a notebook, and
most new notebooks have sata drives. It's quite embarrassing that we
_still_ do not support this. Right now, it's perfectly possible to
suspend the drive in mid-transfer.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:36:09 -08:00
Tejun Heo
461d4e90c8 [BLOCK] update SCSI to use new blk_ordered for barriers
All ordered request related stuff delegated to HLD.  Midlayer
now doens't deal with ordered setting or prepare_flush
callback.  sd.c updated to deal with blk_queue_ordered
setting.  Currently, ordered tag isn't used as SCSI midlayer
cannot guarantee request ordering.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06 09:52:55 +01:00
Linus Torvalds
f61ea1b0c8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 2006-01-04 16:30:12 -08:00
James.Smart@Emulex.Com
42e33148df [SCSI] fix for fc transport recursion problem.
In the scenario that a link was broken, the devloss timer for each
rport was expire at roughly the same time, causing lots of "delete"
workqueue items being queued. Depth is dependent upon the number of
rports that were on the link.

The rport target remove calls were calling flush_scheduled_work(),
which would interrupt the stream, and start the next workqueue item,
which did the same thing, and so on until recursion depth was large.

This fix stops the recursion in the initial delete path, and pushes it
off to a host-level work item that reaps the dead rports.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-15 19:22:14 -08:00
Matthew Wilcox
1abfd37013 [SCSI] Rename scsi_print_msg to spi_print_msg
Rename scsi_print_msg to spi_print_msg and move its prototype from
scsi_dbg.h to scsi_transport_spi.h

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-15 18:41:27 -08:00
James Bottomley
7b16318dea Fix up SCSI mismerge
I forgot to do a git-update-cache on the merged files ...
2005-12-15 20:17:02 -06:00
James Bottomley
2a1e1379ba Merge by hand (conflicts in scsi_lib.c)
This merge is pretty extensive.  The conflict is over the new
req->retries parameter, so I had to change the prototype to
scsi_setup_blk_pc_cmnd() and the usage in sd, sr and st.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-15 17:35:24 -06:00
Mike Christie
6e68af666f [SCSI] Convert SCSI mid-layer to scsi_execute_async
Add scsi helpers to create really-large-requests and convert
scsi-ml to scsi_execute_async().

Per Jens's previous comments, I placed this function in scsi_lib.c.
I made it follow all the queue's limits - I think I did at least :), so
I removed the warning on the function header.

I think the scsi_execute_* functions should eventually take a request_queue
and be placed some place where the dm-multipath hw_handler can use them
if that failover code is going to stay in the kernel. That conversion
patch will be sent in another mail though.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-14 19:03:35 -08:00
James Bottomley
c9526497cf [SCSI] Consolidate REQ_BLOCK_PC handling path (fix ipod panic)
This follows on from Jens' patch and consolidates all of the ULD
separate handlers for REQ_BLOCK_PC into a single call which has his
fix for our direction bug.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13 21:29:27 -08:00
Matthew Wilcox
829b84675e [SCSI] Make scsi_transport_spi.h includable by itself
Add forward declarations to allow scsi_transport_spi.h to be compiled by
itself.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13 18:54:40 -07:00
James Bottomley
7f23e146a1 [SCSI] correct some dropped const compiler warnings
Make the vendor, model and rev fields in scsi_device pointers to const
and update a few prototypes of functions using them.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13 18:12:05 -07:00
Christoph Hellwig
7dfdc9a52b [SCSI] use a completion in scsi_send_eh_cmnd
scsi_send_eh_cmnd currently uses a semaphore and an overload of eh_timer
to either get a completion for a command for a timeout.
Switch to using a completion and wait_for_completion_timeout to simply
the code and not having to deal with the races ourselves.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 12:49:36 -06:00
Christoph Hellwig
262eef663b [SCSI] remove scsi_wait_req
This function has been superceeded by the block request based interfaces
and is unused (except for the uncompilable cpqfc driver).

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 12:45:20 -06:00
Christoph Hellwig
474838d5e5 [SCSI] remove Scsi_Host.eh_active
now that the abuse in qla2xxx is gone this field can be remove.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 12:44:44 -06:00
James Bottomley
849a8924a6 Merge by Hand
Conflicts in dec_esp.c (Thanks Bacchus), scsi_transport_iscsi.c and
scsi_transport_fc.h

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-04 22:29:52 -06:00
Linus Torvalds
127f2fa31a Merge branch 'srp' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband 2005-11-04 16:32:36 -08:00
Roland Dreier
aef9ec39c4 IB: Add SCSI RDMA Protocol (SRP) initiator
Add an InfiniBand SCSI RDMA Protocol (SRP) initiator.  This driver is
used to talk talk to InfiniBand SRP targets (storage devices).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02 14:07:13 -08:00
Tim Schmielau
4e57b68178 [PATCH] fix missing includes
I recently picked up my older work to remove unnecessary #includes of
sched.h, starting from a patch by Dave Jones to not include sched.h
from module.h. This reduces the number of indirect includes of sched.h
by ~300. Another ~400 pointless direct includes can be removed after
this disentangling (patch to follow later).
However, quite a few indirect includes need to be fixed up for this.

In order to feed the patches through -mm with as little disturbance as
possible, I've split out the fixes I accumulated up to now (complete for
i386 and x86_64, more archs to follow later) and post them before the real
patch.  This way this large part of the patch is kept simple with only
adding #includes, and all hunks are independent of each other.  So if any
hunk rejects or gets in the way of other patches, just drop it.  My scripts
will pick it up again in the next round.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:32 -08:00
James.Smart@Emulex.Com
19a7b4aebf [SCSI] update fc_transport for removal of block/unblock functions
We recently went back to implement a board reset. When we perform the
reset, we wanted to tear down the internal data structures and rebuild
them. Unfortunately, when it came to the rport structure, things were
odd. If we deleted them, the scsi targets and sdevs would be
torn down. Not a good thing for a temporary reset. We could block the
rports, but we either maintain the internal structures to keep the
rport reference (perhaps even replicating what's in the transport),
or we have to fatten the fc transport with new search routines to find
the rport (and deal with a case of a dangling rport that the driver
forgets).

It dawned on me that we had actually reached this state incorrectly.
When the fc transport first started, we did the block/unblock first, then
added the rport interface. The purpose of block/unblock is to hide the
temporary disappearance of the rport (e.g. being deleted, then readded).
Why are we making the driver do the block/unblock ? We should be making
the transport have only an rport add/delete, and the let the transport
handle the block/unblock.

So... This patch removes the existing fc_remote_port_block/unblock
functions. It moves the block/unblock functionality into the
fc_remote_port_add/delete functions.  Updates for the lpfc driver are
included. Qlogic driver updates are also enclosed, thanks to the
contributions of Andrew Vasquez. [Note: the qla2xxx changes are
relative to the scsi-misc-2.6 tree as of this morning - which does
not include the recent patches sent by Andrew]. The zfcp driver does
not use the block/unblock functions.

One last comment: The resulting behavior feels very clean. The LLDD is
concerned only with add/delete, which corresponds to the physical
disappearance.  However, the fact that the scsi target and sdevs are
not immediately torn down after the LLDD calls delete causes an
interesting scenario... the midlayer can call the xxx_slave_alloc and
xxx_queuecommand functions with a sdev that is at the location the
rport used to be. The driver must validate the device exists when it
first enters these functions. In thinking about it, this has always
been the case for the LLDD and these routines. The existing drivers
already check for existence. However, this highlights that simple
validation via data structure dereferencing needs to be watched.
To deal with this, a new transport function, fc_remote_port_chkready()
was created that LLDDs should call when they first enter these two
routines. It validates the rport state, and returns a scsi result
which could be returned. In addition to solving the above, it also
creates consistent behavior from the LLDD's when the block and deletes
are occuring.

Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 21:20:07 -05:00
Jeff Garzik
01d7b3b8d0 [SCSI] introduce sfoo_printk, sfoo_id, sfoo_channel helpers
New dev_printk wrappers, which allow us to shrink code, and
eliminate direct references to host/channel/id/lun members:
	scmd_printk()

Introduce wrappers for highly common idioms, which may also help us
eliminate some ->{channel,id} references in the future:
	{scmd,sdev}_id()
	{scmd,sdev}_channel()

The scmd_* wrappers are present in scsi/scsi_device.h because they all
employ the dereference chain cmd->device->$member.  We would prefer to
use static inline functions rather than macros, but that would have a

Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 20:47:24 -05:00
Jeff Garzik
13ec92b33e [SCSI] kill unused scsi_scan_single_target()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 20:29:18 -05:00
Andrew Vasquez
91ca7b01ec [SCSI] Add an 'Issue LIP' device attribute in fc_transport class
Ok, here's a patch to add such a common API for fc transport users.
Relevant LLD changes (lpfc and qla2xxx) also present.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 19:35:25 -05:00
Christoph Hellwig
07ba3a9547 [SCSI] sas: add support for PHY resets
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 19:08:03 -05:00
Christoph Hellwig
ac01bbbd3b [SCSI] sas: add flag for locally attached PHYs
Add a flag to mark a PHY as attached to the HBA as opposed to beeing on
an expander.  This is needed because various features are only supported
on those.  This is a crude hack, the proper fix would be to use
different classes for host-attached vs expander phys.  I'm looking into
that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 19:06:45 -05:00
Christoph Hellwig
c3ee74c4e9 [SCSI] scsi_transport_sas: support link error attributes
For now supporting the ->get_linkerrors method is mandatory.  I'll
probably be beaten to implement the .show_foo variables and different
types of attributes soon..

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 14:57:58 -05:00
James Bottomley
9ccfc756a7 [SCSI] move the mid-layer printk's over to shost/starget/sdev_printk
This should eliminate (at least in the mid layer) to make numeric
assumptions about any of the enumeration variables.  As a side effect,
it will also make all the messages consistent and line us up nicely for
the error logging strategy (if it ever shows itself again).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 14:23:02 -05:00
James Bottomley
38a9a621ab Merge HEAD from ../scsi-misc-2.6-old 2005-10-28 11:41:41 -05:00
Jeff Garzik
96b88fb850 Merge branch 'master' 2005-10-28 12:31:34 -04:00
Al Viro
c53033f6b0 [PATCH] gfp_t: drivers/scsi
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28 08:16:50 -07:00
Jeff Garzik
2ee73cc2d5 Merge /spare/repo/linux-2.6/ 2005-10-04 10:16:31 -04:00
James Bottomley
6f3a20242d [SCSI] allow REPORT LUN scanning even for LUN 0 PQ of 3
Currently we just ignore the device, which means there are a few
arrays out there that we don't find.

This patch updates the scsi_report_lun_scan() to take a target instead
of a device so it can be called on a return of
SCSI_SCAN_TARGET_PRESENT, which is what a PQ 3 device returns.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-25 12:01:48 -05:00
Jeff Garzik
c1d9728ecc Merge /spare/repo/linux-2.6/ 2005-09-24 00:25:02 -04:00
Mike Christie
fa0a6957aa [SCSI] iscsi: rename some proto defs
From: hare@suse.de

for a proper alignment between open-iscsi and iscsitarget the
definitions in include/iscsi_proto.h do not match exactly.

With this patch it's possible to have iscsitarget use
'include/iscsi_proto.h' instead of its own iscsi_hdr.h.

Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-20 12:35:27 -05:00
Mike Christie
baebc497b4 [SCSI] iscsi: update some iscsi proto defs
From: michaelc@cs.wisc.edu

Cleanup some iscsi_proto defs, add some missing values, and
fix some defs.

Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-20 12:33:30 -05:00
James Bottomley
3ed7a4704b [SCSI] Fix thread termination for the SCSI error handle
From: 	Alan Stern <stern@rowland.harvard.edu>

This patch (as561) fixes the error handler's thread-exit code.  The
kthread_stop call won't wake the thread from a down_interruptible, so
the patch gets rid of the semaphore and simply does

        set_current_state(TASK_INTERRUPTIBLE);

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>

Modified to simplify the termination loop and correct the sleep condition.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19 09:50:04 -05:00
James Bottomley
939647ee30 [SCSI] fix oops on usb storage device disconnect
We fix the oops by enforcing the host state model.  There have also
been two extra states added: SHOST_CANCEL_RECOVERY and
SHOST_DEL_RECOVERY so we can take the model through host removal while
the recovery thread is active.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19 09:24:52 -05:00
Andreas Herrmann
1832a5862f [SCSI] change port speed definitions for scsi_transport_fc
obviously FC Port Speeds in scsi_transport_fc.h are defined according
to FC-HBA:

#define FC_PORTSPEED_1GBIT              1
#define FC_PORTSPEED_2GBIT              2
#define FC_PORTSPEED_10GBIT             4
#define FC_PORTSPEED_4GBIT              8

Problem is, whoever invented FC-HBA did not care about FC-FS or
FC-GS-x. Following FC-FS/FC-GS-x defintions of port speeds would look
like:

1 GBit: 0x0001
2 GBit: 0x0002
4 GBit: 0x0004
10GBit: 0x0008

(and new in FC-LS:
8 Gbit: 0x0010
16GBit: 0x0020)

I really appreciate if scsi_transport_fc.h would define port speeds
according to FC-GS-x/FC-FS. Thus mapping of port speed capabilities to
values defined in scsi_transport_fc.h can be avoided in the LLDD.

Attached is a patch to change the definitions.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-16 11:25:50 -04:00
Jeff Garzik
165415f700 Merge /spare/repo/linux-2.6/ 2005-09-14 08:12:20 -04:00
James Bottomley
146f7262ee [SCSI] Alter the scsi_add_device() API to conform to what users expect
The original API returned either an ERR_PTR() or a refcounted sdev.
Unfortunately, if it's successful, you need to do a scsi_device_put() on
the sdev otherwise the refcounting is wrong.

Everyone seems to expect that scsi_add_device() should be callable
without doing the ref put, so alter the API so it is (we still have
__scsi_add_device with the original behaviour).

The only actual caller that needs altering is the one in firewire ...
not because it gets this right, but because it acts on the error if one
is returned.

Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-10 14:43:25 -05:00
Andrew Vasquez
218fba0004 [SCSI] fc_transport: Generalize WWN to u64 interger conversions.
On some platforms the hard-casting of 8 byte node_name and
port_name arrays to an u64 would cause unaligned-access
warnings.  Generalize the conversions with a transport
helper function which performs consistent shifting of WWN
bytes.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-10 11:10:43 -05:00
Christoph Hellwig
c7ebbbce36 [SCSI] SAS transport class
The SAS transport class contains common code to deal with SAS HBAs, an
aproximated representation of SAS topologies in the driver model,
and various sysfs attributes to expose these topologies and managment
interfaces to userspace.

In addition to the basic SCSI core objects this transport class introduces
two additional intermediate objects:  The SAS PHY as represented by struct
sas_phy defines an "outgoing" PHY on a SAS HBA or Expander, and the SAS
remote PHY represented by struct sas_rphy defines an "incoming" PHY on a
SAS Expander or end device.  Note that this is purely a software concept, the
underlying hardware for a PHY and a remote PHY is the exactly the same.

There is no concept of a SAS port in this code, users can see what PHYs
form a wide port based on the port_identifier attribute, which is the same
for all PHYs in a port.

This submission doesn't handle hot-plug addition or removal of SAS devices
and thus doesn't do scanning in a workqueue yet, that will be added in
phase2 after this submission.  In a third phase I will add additional
managment infrastructure.

I think this submission is ready for 2.6.14, but additional comments are
of course very welcome.

I'd like to thanks James Smart a lot for his very useful input on the
design.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-09 16:43:37 -05:00
James Bottomley
f5c7f03113 Merge HEAD from ../scsi-iscsi-2.6 2005-09-08 09:37:35 -05:00
Jeff Garzik
c324b44c34 Merge /spare/repo/linux-2.6/ 2005-09-08 05:39:55 -04:00
James Bottomley
17fa53da12 Merge by hand (conflicts in sd.c) 2005-09-06 17:52:54 -05:00
Christoph Hellwig
fe1b2d544d [SCSI] unexport scsi_add_timer/scsi_delete_timer
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06 17:26:37 -05:00
Christoph Hellwig
c5478def7a [SCSI] switch EH thread startup to the kthread API
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06 17:26:06 -05:00
Jeff Garzik
da61396d24 Merge upstream kernel into libata 'passthru' branch 2005-08-29 19:01:43 -04:00
James Bottomley
ea73a9f239 [SCSI] convert sd to scsi_execute_req (and update the scsi_execute_req API)
This one removes struct scsi_request entirely from sd.  In the process,
I noticed we have no callers of scsi_wait_req who don't immediately
normalise the sense, so I updated the API to make it take a struct
scsi_sense_hdr instead of simply a big sense buffer.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-28 11:33:52 -05:00
James Bottomley
33aa687db9 [SCSI] convert SPI transport class to scsi_execute
This one's slightly more difficult.  The transport class uses
REQ_FAILFAST, so another interface (scsi_execute) had to be invented to
take the extra flag.  Also, the sense functions are shifted around to
allow spi_execute to place data directly into a struct scsi_sense_hdr.
With this change, there's probably a lot of unnecessary sense buffer
allocation going on which we can fix later.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-28 11:31:14 -05:00
James Bottomley
1cf72699c1 [SCSI] convert the remaining mid-layer pieces to scsi_execute_req
After this, we just have some drivers, all the ULDs and the SPI
transport class using scsi_wait_req().

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-28 11:27:01 -05:00
James Bottomley
7a93aef7fb Merge HEAD from ../scsi-misc-2.6-tmp 2005-08-28 11:18:35 -05:00
James Bottomley
392160335c [SCSI] use scatter lists for all block pc requests and simplify hw handlers
Original From: Mike Christie <michaelc@cs.wisc.edu>

Add scsi_execute_req() as a replacement for scsi_wait_req()

Fixed up various pieces (added REQ_SPECIAL and caught req use after
free)

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-28 10:46:40 -05:00
James Bottomley
10c1b88987 [SCSI] add ability to deny binding to SPI transport class
This patch is necessary if we begin exposing underlying physical disks
(which can attach to the SPI transport class) of the hardware RAID
cards, since we don't want any SPI parameters binding to the RAID
devices.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-14 14:42:25 -05:00
Jeff Garzik
2f058256cb Merge /spare/repo/linux-2.6/ 2005-08-10 13:46:28 -04:00
James.Smart@Emulex.Com
5c44cd2afa [SCSI] fix target scanning oops with fc transport class
We have some nasty issues with 2.6.12-rc6. Any request to scan on
the lpfc or qla2xxx FC adapters will oops. What is happening is the
system is defaulting to non-transport registered targets, which
inherit the parent of the scan. On this second scan, performed by
the attribute, the parent becomes the shost instead of the rport.
The slave functions in the 2 FC adapters use starget_to_rport()
routines, which incorrectly map the shost as an rport pointer.

Additionally, this pointed out other weaknesses:
- If the target structure is torn down outside of the transport,
  we have no method for it to be regenerated at the proper parent.
- We have race conditions on the target being allocated by both
  the midlayer scan (parent=shost) and by the fc transport
  (parent=rport).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-08 17:14:55 -05:00
James Bottomley
b21a413851 [SCSI] add global timeout to the scsi mid-layer
There are certain rogue devices (and the aic7xxx driver) that return
BUSY or QUEUE_FULL forever.  This code will apply a global timeout (of
the total number of retries times the per command timer) to a given
command.  If it is exceeded, the command is completed regardless of its
state.

The patch also removes the unused field in the command: timeout and
timeout_total.

This solves the problem of detecting an endless loop in the mid-layer
because of BUSY/QUEUE_FULL bouncing, but will not recover the device.
In the aic7xxx case, the driver can be recovered by sending a bus reset,
so possibly this should be tied into the error handler?

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-08 09:55:39 -05:00
Alex Aizman
39e84790d3 [SCSI] open-iscsi/linux-iscsi-5 Initiator: Header files
open-iscsi-headers.patch - common header files:
	- iscsi_if.h (user/kernel #defines and user/kernel events);
	- iscsi_proto.h (RFC3720 #defines and types);
	- scsi_transport_iscsi.h (transport API, transport #defines and types).

Signed-off-by: Alex Aizman <itn780@yahoo.com>
Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-06 09:33:41 -05:00
James Bottomley
d872ebe454 [SCSI] add missing hold_mcs parameter to the spi transport class
This parameter is important only to people who take the time to tune the
margin control settings, otherwise it's completely irrelevant.  However,
just in case anyone should want to do this, it's appropriate to include
the parameter.

I don't do anything with it in DV by design, so the parameter will come
up as off by default, so if anyone actually wants to play with the
margin control settings they'll have to enable it under the
spi_transport class first.

I also updated the transfer settings display to report all of the PPR
settings instead of only DT, IU and QAS

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-03 15:54:55 -05:00
James Bottomley
47ba39eead [SCSI] add template for scsi_host_set_state()
Fixes up some warnings in the tree.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-30 11:39:53 -05:00
Mike Anderson
82f29467a0 [SCSI] host state model update: mediate host add/remove race
Add support to not allow additions to a host when it is being removed.

Signed-off-by: Mike Anderson <andmike@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-30 11:13:01 -05:00
Mike Anderson
d330187408 [SCSI] host state model update: replace old host bitmap state
Migrate the current SCSI host state model to a model like SCSI
device is using.

Signed-off-by: Mike Anderson <andmike@us.ibm.com>

Rejections fixed up and

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-30 11:10:24 -05:00
James Bottomley
e10fb91c4d [SCSI] fix function prototype warning
int_to_scsilun() takes a pointer to a struct scsi_lun in it's
prototype, so add this structure to scsi_device.h to avoid declaration
inside function prototype warnings.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14 11:54:17 -05:00
James.Smart@Emulex.Com
2f4701d827 [SCSI] add int_to_scsilun() function
One of the issues we had was reverting the midlayers lun value
into the 8byte lun value that we wanted to send to the device.
Historically, there's been some combination of byte swapping,
setting high/low, etc. There's also been no common thread between
how our driver did it and others.  I also got very confused as
to why byteswap routines were being used.

Anyway, this patch is a LLDD-callable function that reverts the
midlayer's lun value, stored in an int, to the 8-byte quantity
(note: this is not the real 8byte quantity, just the same amount
that scsilun_to_int() was able to convert and store originally).

This also solves the dilemma of the thread:
http://marc.theaimsgroup.com/?l=linux-kernel&m=112116767118981&w=2

A patch for the lpfc driver to use this function will be along
in a few days (batched with other patches).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14 11:21:27 -04:00
James Bottomley
7f602c5393 [SCSI] add TYPE_RBC to our type table
Here's a tiny update that means we print the correct ASCII type
information

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11 12:38:33 -05:00
Christoph Hellwig
8d115f845a [SCSI] remove scsi_cmnd->state
We never look at it except for the old megaraid driver that abuses it
for sending internal commands.  That usage can be fixed easily because
those internal commands are single-threaded by a mutex and we can easily
use a completion there.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26 12:16:24 -05:00
Christoph Hellwig
b4edcbcafd [SCSI] remove scsi_cmnd->owner
never checked anywhere

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26 12:15:28 -05:00
Christoph Hellwig
f5ad56145d [SCSI] remove scsi_cmnd->abort_reason
Never used for anything but printing it out in debug routines.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26 12:14:46 -05:00
Christoph Hellwig
a4c8f62851 [SCSI] remove scsi_cmnd.eh_state
it's never set to anything, and just three broken drivers are looking
at it and doing odd things.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26 12:14:10 -05:00
Christoph Hellwig
12413197ee [SCSI] remove scsi_set_device
scsi_add_host is the proper place to set the device, but people copy
the scsi_set_device usage from older drivers again and again.

note that this leaves some legacy drivers like qlogicisp/qlogicfc
without pci association in sysfs, but they're scheduled to go away soon
anyway.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26 08:31:47 -05:00
Markus Lidel
b2aaee33fb [PATCH] I2O: Adaptec specific SG_IO access, firmware access through sysfs and 2400A workaround
Changes:
 - Provide SG_IO access to BLOCK and EXECUTIVE class on Adaptec
   controllers
 - Use PRIVATE messages in SCSI-OSM because on some controllers normal
   SCSI class commands like READ or READ CAPACITY cause errors
 - Use new DMA and SG list creation function
 - Added workaround to limit sectors per request for Adaptec 2400A
   controllers

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:28 -07:00
Jeff Garzik
80bd6d7f5e Merge /spare/repo/linux-2.6/ 2005-06-22 13:10:49 -04:00
James Bottomley
153b1e1fd9 Automatic merge of ../scsi-misc-2.6-old/ 2005-05-26 14:14:55 -04:00
James Bottomley
c3e9dda4f5 [SCSI] allow the HBA to reserve target and device private areas
This patch basically allows any HBA attached to the SPI transport class
to declare an extra area which the mid-layer will allocate as part of
its device and target allocations.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-26 11:49:20 -04:00
James Bottomley
a283bd37d0 [SCSI] Add target alloc/destroy callbacks to the host template
This gives the HBA driver notice when a target is created and
destroyed to allow it to manage its own target based allocations
accordingly.

This is a much reduced verson of the original patch sent in by
James.Smart@Emulex.com

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-26 11:27:53 -04:00
Al Viro
631e8a1398 [SCSI] TYPE_RBC cache fixes (sbp2.c affected)
a) TYPE_SDAD renamed to TYPE_RBC and taken to scsi.h
	b) in sbp2.c remapping of TYPE_RPB to TYPE_DISK turned off
	c) relevant places in midlayer and sd.c taught to accept TYPE_RBC
	d) sd.c::sd_read_cache_type() looks into page 6 when dealing with
TYPE_RBC - these guys have writeback cache flag there and are not guaranteed
to have page 8 at all.
	e) sd_read_cache_type() got an extra sanity check - it checks that
it got the page it asked for before using its contents.  And screams if
mismatch had happened.  Rationale: there are broken devices out there that
are "helpful" enough to go for "I don't have a page you've asked for, here,
have another one".  For example, PL3507 had been caught doing just that...
	f) sbp2 sets sdev->use_10_for_rw and sdev->use_10_for_ms instead
of bothering to remap READ6/WRITE6/MOD_SENSE, so most of the conversions
in there are gone now.

	Incidentally, I wonder if USB storage devices that have no
mode page 8 are simply RBC ones.  I haven't touched that, but it might
be interesting to check...

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-26 08:41:15 -05:00
949d33e70f Automatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git branch HEAD 2005-05-26 01:47:10 -04:00
James Bottomley
62a8612972 [SCSI] implement parameter limits in the SPI transport class
There's a basic need not to have parameters go under or over certain
values when doing domain validation.  The basic ones are

max_offset, max_width and min_period

This patch makes the transport class take and enforce these three
limits.  Currently they can be set by the user, although they could
obviously be read from the HBA's on-board NVRAM area during
slave_configure (if it has one).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 15:54:32 -05:00
Gerd Knorr
daa6eda65a [SCSI] add scsi changer driver
This patch adds a device driver for scsi media changer devices.

Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20 12:53:50 -05:00
Jeff Garzik
b095518ef5 [libata] ATA passthru (arbitrary ATA command execution)
Authors:
Brett Russ <russb@emc.com>
John W. Linville <linville@tuxdriver.com>
Andy Warner <andyw@pobox.com>
2005-05-12 15:45:22 -04:00
James Bottomley
c46f2ffb9e merge by hand (scsi_device.h) 2005-04-18 13:45:00 -05:00
06f81ea8ca [PATCH] scsi: remove volatile from scsi data
This patch removes volatile qualifier from scsi_device->device_busy,
Scsi_Host->host_busy and ->host_failed as the volatile qualifiers
don't serve any purpose now.  While at it, convert those fields from
unsigned short to unsigned int as suggested by Christoph.


Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 12:35:31 -05:00
bf341919db scsi: add DID_REQUEUE to the error handling
We have a DID_IMM_RETRY to require a retry at once, but we could do with
a DID_REQUEUE to instruct the mid-layer to treat this command in the
same manner as QUEUE_FULL or BUSY (i.e. halt the submission until
another command returns ... or the queue pressure builds if there are no
outstanding commands).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 12:35:06 -05:00
c6295cdf65 [PATCH] scsi: remove meaningless scsi_cmnd->serial_number_at_timeout field
scsi_cmnd->serial_number_at_timeout doesn't serve any purpose
anymore.  All serial_number == serial_number_at_timeout tests
are always true in abort callbacks.  Kill the field.  Also, as
->pid always equals ->serial_number and ->serial_number
doesn't have any special meaning anymore, update comments
above ->serial_number accordingly.  Once we remove all uses of
this field from all lldd's, this field should go.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 12:33:15 -05:00
d3a933dc98 [PATCH] scsi: remove unused scsi_cmnd->internal_timeout field
scsi_cmnd->internal_timeout field doesn't have any meaning
anymore.  Kill the field.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 12:32:47 -05:00
b6651129cc [PATCH] consolidate timeout defintions in scsi.h
Adapted from a patch in SuSE's kernel SRPM.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 12:31:52 -05:00
c2a9331c62 updates for CFQ oops fix
- add a comment to the device structure that the device_busy field
  is now protected by the request_queue->queue_lock
- null out sdev->request_queue after the queue is released to trap
  any (and there shouldn't be any) use after the queue is freed.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-16 20:10:34 -05:00
152587deb8 [PATCH] fix NMI lockup with CFQ scheduler
The current problem seen is that the queue lock is actually in the
SCSI device structure, so when that structure is freed on device
release, we go boom if the queue tries to access the lock again.

The fix here is to move the lock from the scsi_device to the queue.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-16 20:10:09 -05:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00