Commit Graph

23046 Commits

Author SHA1 Message Date
Mithlesh Thukral
5d512f5594 NetXen: Removal of redundant macros
NetXen: Remove 2 redundant macro definitions from header file.

Signed-off by: Mithlesh Thukral <mithlesh@netxen.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:06 -04:00
Mithlesh Thukral
595e3fb8cf NetXen: Multi PCI support for Quad cards
NetXen: Fix the multi PCI function for cards with more than 2 ports.
This patch fixes the working of multi PCI capable driver on cards with
more than 2 ports by adding the addresses for their rings and sizes.

Signed-off by: Mithlesh Thukral <mithlesh@netxen.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:05 -04:00
Mithlesh Thukral
13ba9c7714 NetXen: Removal of redundant argument passing
NetXen: Removal of redundant function call parameters and bug fixes.
This patch will remove the redundant paramters which were being passed to
many functions since now adapter->portnum can be used.

Signed-off-by: Mithlesh Thukral <mithlesh@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:05 -04:00
Mithlesh Thukral
3176ff3ee7 NetXen: Use multiple PCI functions
NetXen: Make driver use multiple PCI functions.
This patch will make NetXen driver work with multiple PCI functions. This will
make the usage of memory resources as well as interrupts more independent
among different functions which results in better throughput. This change has
been done after the multiport support is added in firmware.

Signed-off by: Mithlesh Thukral <mithlesh@netxen.com>

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:05 -04:00
Scott Feldman
d52df4a35a [netdrvr e100] experiment with doing RX in a similar manner to eepro100
I was going to say that eepro100's speedo_rx_link() does the same DMA
abuse as e100, but then I noticed one little detail: eepro100 sets  both
EL (end of list) and S (suspend) bits in the RFD as it chains it  to the
RFD list.  e100 was only setting the EL bit.  Hmmm, that's  interesting.
That means that if HW reads a RFD with the S-bit set,  it'll process
that RFD and then suspend the receive unit.  The  receive unit will
resume when SW clears the S-bit.  There is no need  for SW to restart
the receive unit.  Which means a lot of the receive  unit state tracking
code in the driver goes away.

So here's a patch against 2.6.14.  (Sorry for inlining it; the mailer
I'm using now will mess with the word wrap).  I can't test this on
XScale (unless someone has an e100 module for Gumstix :) .  It should
be doing exactly what eepro100 does with RFDs.  I don't believe this
change will introduce a performance hit because the S-bit and EL-bit  go
hand-in-hand meaning if we're going to suspend because of the S- bit,
we're on the last resource anyway, so we'll have to wait for SW  to
replenish.
(cherry picked from 29e79da9495261119e3b2e4e7c72507348e75976 commit)
2007-04-28 11:01:05 -04:00
Randy Dunlap
32684ec616 mii: add kernel-doc notation
Add kernel-doc notation to drivers/net/mii.c functions.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:05 -04:00
Michael Ellerman
493a684ab8 Fix sparse errors in drivers/net/ibmveth.c
drivers/net/ibmveth.c:96:46: error: marked inline, but without a definition
drivers/net/ibmveth.c:96: warning: 'ibmveth_rxq_harvest_buffer' declared inline after being called
drivers/net/ibmveth.c:96: warning: previous declaration of 'ibmveth_rxq_harvest_buffer' was here

Just let the compiler decide, as it happens gcc 4.~ inlines it anyway.

drivers/net/ibmveth.c:957:71: warning: Using plain integer as NULL pointer
drivers/net/ibmveth.c:964:85: warning: Using plain integer as NULL pointer

Split the long lines as well, ugly, but < 80 columns.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:05 -04:00
Kim Phillips
c2bcf00b43 ucc_geth: version 1.1
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:05 -04:00
Nicu Ioan Petru
3a8205ead4 ucc_geth: fixes for ucc_geth_memclean
The ucc_geth_memclean function can be called before the Tx BD rings, Rx
BD rings and associated socket buffers are allocated (for example if
ucc_fast_init fails). The current code doesn't check if p_tx_bd_ring[i]
is null, generating a kernel panic when trying to free the associated
socket buffers.

The function can also fail when accessing the uninitialized list_head
structures ugeth->group_hash_q and ugeth->ind_hash_q. In the current
implementation the list heads are initialized only when
maxGroupAddrInHash and maxIndAddrInHash are positive values, although I
think it's better to always initialize them.

Signed-off-by: Ionut Nicu <ionut.nicu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:05 -04:00
Michael Reiss
d5b9049df2 ucc_geth: Implement Transmit on Demand support
Transmit on Demand: Fix spelling in config option, and make it actually enable TOD.

Signed-off-by: Michael Reiss <michael.f.reiss@freescale.com>
Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:04 -04:00
Michael Barkowski
7563907eb8 ucc_geth: Fix interrupt coalescing size and alignment
The rx interrupt coalescing table alignment was "guessed" to be 4,
but should be 64. The size should be 8 * number of queues + 4.
Verified in the MPC8323E manual.

Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:04 -04:00
Michael Reiss
702ff12ce7 ucc_geth: NAPI-related bug fixes
Based partly on the gianfar driver, this patch fixes several
bugs which were causing NAPI to be completely unusable.
* An IRQ is still needed in NAPI, to kick off NAPI task,
  and for Tx processing.  Request the IRQ.
* If rx_work_limit = 0 we are not complete.
* While running Rx NAPI processing we must mask Rx events,
  including Rx busy.
* ucc_geth_rx function does not need a lock.
  Could lead to deadlock in NAPI case.
* There's no need to loop reading ucce multiple times in the ISR,
  so while adding the call to schedule NAPI which was not there,
  simplify the event processing into if-else format.
* Rx Busy now kicks off NAPI processing, while still
  being counted as an error.

Signed-off-by: Michael Reiss <michael.f.reiss@freescale.com>
Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:04 -04:00
Kim Phillips
728de4c927 ucc_geth: migrate ucc_geth to phylib
migrate ucc_geth to use the common phylib code.

There are several side effects from doing this:

o deprecate 'interface' property specification present
  in some old device tree source files in
  favour of a split 'max-speed' and 'interface-type'
  description to appropriately match definitions
  in include/linux/phy.h.  Note that 'interface' property
  is still honoured if max-speed or interface-type
  are not present (backward compatible).
o compile-time CONFIG_UGETH_HAS_GIGA is eliminated
  in favour of probe time speed derivation logic.
o adjust_link streamlined to only operate on maccfg2
  and upsmr.r10m, instead of reapplying static initial
  values related to the interface-type.
o Addition of UEC MDIO of_platform driver requires
  platform code add 'mdio' type to id list
  prior to calling of_platform_bus_probe (separate patch).
o ucc_struct_init introduced to reduce ucc_geth_startup
  complexity.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:04 -04:00
Daniel Drake
5d082fe85b [PATCH] zd1211rw: Add ID for ZyXEL AG-220
Tested by Christoph Sager and Tomas Klas

zd1211b chip 0586:3412 v4810 high 00-13-49 AL7230B_RF pa0 g----

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:01:04 -04:00
Daniel Drake
ba528c4587 [PATCH] zd1211rw: Add AL7230B RF support for ZD1211B
This patch adds support for some new ZD1211B devices which ship with
the AL7230B RF.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:01:04 -04:00
Daniel Drake
72018b223d [PATCH] zd1211rw: rework band edge patching
This change allows RF drivers to provide their own 6M band edge patching
implementation, while providing a generic implementation shared by most
currently supported RF's.

The upcoming ZD1211B/AL7230B code will use this to define its own
patching function, which is different from the other RF configurations.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:01:03 -04:00
Daniel Drake
dc536a7069 [PATCH] zd1211rw: Remove invalid CR write during ZD1211 phy reset
The vendor driver only does the CR123 write for non-USB devices (which
don't exist on the consumer market)

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:01:03 -04:00
Marcin Juszkiewicz
25ac6c2627 [PATCH] hostap_cs: support ADLINK 345 CF
Add ADLINK 345 CF card into hostap_cs

product info: "ADLINK 345 CF"
 manfid 0xd601, 0x0005

Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:01:03 -04:00
Larry Finger
3a5c393e6f [PATCH] bcm43xx: Change initialization for 2050 radios
This patch implements the changes in the specifications for
2050radio_init that were recently posted.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:01:03 -04:00
Adrian Bunk
b1fc1fa9b3 make drivers/net/qla3xxx.c:PHY_DEVICES[] static
On Fri, Mar 30, 2007 at 01:05:59AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.21-rc5-mm2:
>...
>  git-netdev-all.patch
>...
>  git trees
>...

This patch makes the needlessly global PHY_DEVICES[] static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:03 -04:00
Ramkrishna Vepa
3ef34b807d S2io: Change of driver maintainers
- Changed the maintainers for the S2io driver.

Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:03 -04:00
Shani
d7ef45b049 Patch:replace with time_after in drivers/net/eexpress.c
Replacing with time_after in drivers/net/eexpress.c
Applies and compiles clean on latest tree.Not tested.

Signed-off-by: Shani Moideen <shani.moideen@wipro.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:03 -04:00
Jan-Bernd Themann
acbddb591b ehea: removing unused functionality
This patch includes:
- removal of unused fields in structs
- ethtool statistics cleanup
- removes unsed functionality from send path

Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:02 -04:00
Gabriel Paubert
144213d71c mv643xx_eth: make eth_port_uc_addr_{get,set}() calls symmetric
There is no good reason for the asymmetry in the parameters of
eth_port_uc_addr_get() and eth_port_uc_addr_set().  Make them
symmetric.  Remove some gratuitous block comments while we're here.

Signed-off-by: Gabriel Paubert <paubert@iram.es>
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:02 -04:00
Ron Mercer
201f27e625 qla3xxx: Bumping driver version number to v2.03.00-k4
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:02 -04:00
Ron Mercer
3efedf2e5b qla3xxx: Adding support for the Agere PHY (ET1011C)
This PHY support patch was written by Benjamin Li.
Signed-off-by: Benjamin Li <benjamin.li@qlogic.com>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:02 -04:00
Ron Mercer
ec8263839a qla3xxx: Add ethtool get_pauseparam for improved bonding support.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:02 -04:00
Robert P. J. Day
f930e46a85 remove unused header file: drivers/net/skfp/h/lnkstat.h
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:02 -04:00
Folkert van Heusden
939456ac51 baycom_ser_fdx: also allow i/o ports >= 0x1000 and enhanced failure logging
The baycom_ser_fdx driver did not allow i/o ports >= 0x1000.  Now that
there are pci cards (with rs232 ports) which use for example 0xb800 this
limit should not exists.

Also, for non kernel coders find the cause of problems was challenging so I
added extra logging.

Signed-off-by: Folkert van Heusden <folkert@vanheusden.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:02 -04:00
Jean Delvare
4eccccb362 strlcpy is smart enough
strlcpy already accounts for the trailing zero in its length
computation, so there is no need to substract one to the buffer size.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jan-Bernd Themann <themann@de.ibm.com>
Cc: Thomas Klein <osstklei@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:02 -04:00
Daniel Drake
a3fa3aba7a [PATCH] zd1211rw: Add another ID for Linksys WUSBF54G
Tested by TiCPU on irc

zd1211 chip 13b1:001e v4802 high 00-14-bf AL2230_RF pa0 g---

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:01:02 -04:00
Daniel Drake
44713b1da5 [PATCH] zd1211rw: Don't handle broken frames in monitor mode
Using monitor mode, Johannes Berg observed out that lots of corrupted
and otherwise invalid frames were being passed to the host.

When in monitor mode we were disabling the hardware filtering here, but
this is not how monitor mode should work.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:01:01 -04:00
Daniel Drake
d2d7c05210 [PATCH] zd1211rw: Mark some data const
This is a backport of Helge Deller's recent patch for wireless-dev.git

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:01:01 -04:00
Jouni Malinen
85d32e7b0e [PATCH] Update my email address from jkmaline@cc.hut.fi to j@w1.fi
After 13 years of use, it looks like my email address is finally going
to disappear. While this is likely to drop the amount of incoming spam
greatly ;-), it may also affect more appropriate messages, so let's
update my email address in various places. In addition, Host AP mailing
list is subscribers-only and linux-wireless can also be used for
discussing issues related to this driver which is now shown in
MAINTAINERS.

Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:01:01 -04:00
Jan-Bernd Themann
e542aa6bd5 ehea: code cleanup
This patch includes:

- code cleanup related to resource management
- extended error data gathering for resource management
- removing trailing whitespaces

Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:01 -04:00
Jan-Bernd Themann
1eef4e04c9 ehea: fix for dynamic lpar support
The patch fixes bugs related to the probe / remove adapter
functionality (handling of OFDT nodes)

Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:01 -04:00
Deepak Saxena
d683001828 Netpoll support for Sibyte MAC
NETPOLL support for Sibyte MAC

Signed-off-by: Manish Lachwani <mlachwani@mvista.com>
Signed-off-by: Deepak Saxena <dsaxena@mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:01 -04:00
Ramkrishna Vepa
0c61ed5fe2 S2io: Remove unused variables
- Remove unused variables from s2io_nic structure

- Changed the memory failure printk messages to print only in debug mode

- Updated the copyright messages

(Resending; due to patch being corrupted)

Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:01 -04:00
Ralf Baechle
1e2b980fdf MIPSnet: Modernize use platform_device API.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:01 -04:00
Stephen Hemminger
a5f8f3b6c9 skge: version 1.11
New version to track changes.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:00 -04:00
Stephen Hemminger
3f0dec7f60 skge: rearrange fields
Do some minor rearrangement of data structures to try and optimize
cache usage.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:00 -04:00
Stephen Hemminger
992c9623b1 skge: transmit locking improvements
Don't need to lock when processing transmit complete unless queue fills.
Modeled after tg3.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:00 -04:00
Stephen Hemminger
7e0038a414 skge: ignore unused error interrupts
The following hardware error bits only show up on Genesis chipset
and are handled elsewhere, so they can be masked off.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-28 11:01:00 -04:00
Tony Breeds
d2f11e0991 [PATCH] libertas: use standard kernel macros
Cleanup drivers/net/wireless/libertas/debugfs.c to use standard kernel
macros and functions.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:01:00 -04:00
Michal Schmidt
af5b5c9aa9 [PATCH] airo: Make /sys/bus/pci/drivers/airo/{,un}bind work
The way airo.c keeps track of all its devices is complicated and buggy
as well (del_airo_dev forgets to free the memory add_airo_dev allocates).
It's cleaner to use the standard list primitives.
While we're at it, it's not necessary to put PCI cards in the list, because
the kernel already keeps track of them. We can take advantage of it and
use the .remove callback as it was meant to be.
This makes /sys/bus/pci/drivers/airo/{,un}bind work.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:01:00 -04:00
Michal Schmidt
fd48f8d3a3 [PATCH] airo: Don't check for NULL before kfree()
It's unnecessary to check for NULL before calling kfree().

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:01:00 -04:00
Larry Finger
aa93c85d09 [PATCH] bcm43xx:Eliminate some 'G Mode Enable' magic numbers
In code manipulating the TM State Low register of 802.11 cores, two
different magic numbers are used to reference the 'G Mode Enable' bit.
One of these, 0x20000000, is clear, but the other, (0x800 << 18), is not.
This patch replaces both types with a defined constant. In addition, two
bits in the TM State High registers are given definitions to help in
following the code.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:00:59 -04:00
Daniel Drake
aec91028db [PATCH] zd1211rw: More device IDs
ASUS A9Rp
Tested by Serge
zd1211b chip 0b05:171b v4802 high 00-17-31 AL2230_RF pa0 g--

ZyXEL G-202
Tested by Marcus D. Hanwell
zd1211b chip 0586:3410 v4810 high 00-13-49 AL2230_RF pa0 g---

US Robotics USR805423
Tested by Pascal S. de Kloe
FCC ID: RAXWN4501H
zd1211b chip 0baf:0121 v4810 high 00-14-c1 AL2230_RF pa0 g--N
Julien Pinon reports this also comes in AL2230S form

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:00:59 -04:00
Daniel Drake
f2a81a161d [PATCH] zd1211rw: Add AL2230S RF support
ZD1211 appears to be back in production: a number of new devices have
been appearing! Some of them are using new radios.

This patch adds support for the next generation AL2230 RF chip which has
been spotted in a few new devices.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:00:59 -04:00
Daniel Drake
832855dc5a [PATCH] zd1211rw: Use compare_ether_addr()
Suggested by Maxime Austruy, based on mac80211 changes from Stephen
Hemminger

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-04-28 11:00:59 -04:00