Commit Graph

483 Commits

Author SHA1 Message Date
Andrew Vasquez
5fa0ae1982 [SCSI] qla2xxx: Update version number to 8.03.00-k4.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:28:03 -05:00
Andrew Vasquez
ca42f2b5f5 [SCSI] qla2xxx: Correct overwrite of pre-assigned init-control-block structure size.
The value is already pre-assigned prior to the qla2x00_mem_alloc().

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:55 -05:00
Andrew Vasquez
c6b2fca820 [SCSI] qla2xxx: Correct truncation in return-code status checking.
QLA_* return codes are 'int' in size.  There were still several
legacy check-points which assumed a return-code width of 8-bits.
This could cause incorrect assumptions of 'good' status if a
return of QLA_FUNCTION_TIMEOUT.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:54 -05:00
Anirban Chakraborty
ee546b6e04 [SCSI] qla2xxx: Correct vport delete bug.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:54 -05:00
Lalit Chandivade
605aa2bcd5 [SCSI] qla2xxx: Use correct value for max vport in LOOP topology.
Use minimum value for max vport during firmware initialization in LOOP
topology. Using max vport value from get resource count in LOOP topology
causes firmware initialization failure.

Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:54 -05:00
Andrew Vasquez
6431c5dc5e [SCSI] qla2xxx: Correct address range checking for option-rom updates.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-10 09:27:53 -05:00
Andrew Vasquez
822c05b633 [SCSI] qla2xxx: Update version number to 8.03.00-k3.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-02-10 11:15:20 -05:00
Andrew Vasquez
9088608e00 [SCSI] qla2xxx: Mask out 'reserved' bits while processing FLT regions.
Bits 31-8 are marked as reserved and should be ignored while
interpreting a region's code.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-02-10 11:15:20 -05:00
Anirban Chakraborty
cf5a163127 [SCSI] qla2xxx: Correct slab-error overwrite during vport creation and deletion.
The clearing of a vha's req_ques were overrunning during vport
creation.  During deletion, vport queues should be torn-down
after all cleanup has occurred.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-02-10 11:15:20 -05:00
Andrew Vasquez
8a659571ec [SCSI] qla2xxx: Properly acknowledge IDC notification messages.
To ensure smooth operations amongst the FCoE and NIC side
components of the ISP81xx chip, the FCoE driver (qla2xxx) must
ensure the 10gb NIC driver (qlge) does not timeout waiting for
IDC (Inter-Driver Communication) acknowledgments.  The
acknowledgment requirements are trivial -- a simple mirroring of
incoming mailbox registers during the AEN to a process-context
capable mailbox command.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-02-10 11:15:20 -05:00
Anirban Chakraborty
618a752319 [SCSI] qla2xxx: Remove interrupt request bit check in the response processing path in multiq mode.
Correct response-queue-0 processing by instructing the firmware
to run with interrupt-handshaking disabled, similarly to what is
now done for all non-0 response queues.  Since all
response-queues now run in the same mode, the driver no longer
needs the hot-path 'is-disabled-HCCR' test.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-02-10 11:15:19 -05:00
Shyam_Iyer@Dell.com
7f977ddd0e [SCSI] qla2xxx: fix Kernel Panic with Qlogic 2472 Card.
Kernel Panic is observed with a Qlogic 2472 Card is plugged into the
system and the qla2xxx driver is loaded:

QLogic Fibre Channel HBA Driver: 8.02.01.02.11.0-k9
vendor=8086 device=3410
qla2xxx 0000:05:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
qla2xxx 0000:05:00.0: Found an ISP2432, irq 40, iobase
0xffffc2001091c000
qla2xxx 0000:05:00.0: Configuring PCI space...
qla2xxx 0000:05:00.0: setting latency timer to 64
qla2xxx 0000:05:00.0: Configure NVRAM parameters...
BUG: unable to handle kernel NULL pointer dereference at
0000000000000000
IP: [<ffffffff8036319a>] strncpy+0x5/0x1e
PGD 7c564067 PUD 78d8c067 PMD 0
Oops: 0000 [1] SMP
last sysfs file:
/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input4/event
4/dev
CPU 1
Modules linked in: qla2xxx(+) squashfs usb_storage scsi_transport_fc
scsi_tgt parport_pc parport arc4 ecb crypto_blkcipher acpi_cpufreq fan
loop nfs nfs_acl lockd sunrpc nls_iso8859_1 nls_cp437 ipv6 af_packet st
sr_mod ide_disk ide_cd_mod ide_core cdrom usbhid hid ff_memless sg
sd_mod crc_t10dif uhci_hcd mptsas mptscsih ehci_hcd mptbase
scsi_transport_sas rtc_cmos rtc_core rtc_lib usbcore scsi_mod thermal
bnx2 button processor thermal_sys hwmon edd
Supported: Yes
Pid: 4415, comm: insmod Not tainted 2.6.27.13-1-default #1
RIP: 0010:[<ffffffff8036319a>] [<ffffffff8036319a>] strncpy+0x5/0x1e
RSP: 0018:ffff88007b04fbc0 EFLAGS: 00010202
RAX: 00000000000000b7 RBX: ffff88007b9641e0 RCX: ffff88007c1b2ad7
RDX: 000000000000004f RSI: 0000000000000000 RDI: ffff88007c1b2ad7
RBP: ffff88007c1b0620 R08: 0000000000000010 R09: 0000000100000000
R10: 0000000000000046 R11: ffffffff803651c6 R12: ffff88007b074000
R13: ffff88007b964000 R14: ffff88007c1b2ac6 R15: 0000000000000000
FS: 00007f91a6c366f0(0000) GS:ffff88007dbeee40(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 000000007bd7c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process insmod (pid: 4415, threadinfo ffff88007b04e000, task
ffff880078586180)
Stack: ffffffffa02d82c4 0000000000002432 ffff88007d385000
ffff88007c1b0620
ffff88007c1b0620 ffff88007c1b0000 ffff88007d385000 0000000000002432
ffffffffa02dcb1e 0000000000002432 ffffc2001091c000 ffff88007c1b0620
Call Trace:
[<ffffffffa02d82c4>] qla24xx_nvram_config+0x385/0x6c2 [qla2xxx]
[<ffffffffa02dcb1e>] qla2x00_initialize_adapter+0x169/0x383 [qla2xxx]
[<ffffffffa02f2040>] qla2x00_probe_one+0x6bc/0x9c6 [qla2xxx]
[<ffffffff8037346f>] pci_device_probe+0xb8/0x105
[<ffffffff803e5a27>] really_probe+0xdd/0x1e5
[<ffffffff803e5c14>] __driver_attach+0x46/0x6d
[<ffffffff803e51e1>] bus_for_each_dev+0x44/0x78
[<ffffffff803e4ac7>] bus_add_driver+0xef/0x235
[<ffffffff803e5dd8>] driver_register+0xa2/0x11f
[<ffffffff803736fd>] __pci_register_driver+0x5d/0x90
[<ffffffffa0308126>] qla2x00_module_init+0x126/0x159 [qla2xxx]
[<ffffffff80209041>] _stext+0x41/0x110
[<ffffffff80260abd>] sys_init_module+0xa0/0x1ba
[<ffffffff8020bfbb>] system_call_fastpath+0x16/0x1b
[<00007f91a679b76a>] 0x7f91a679b76a
Code: ff c1 41 39 c0 75 05 45 85 c0 75 bf 41 29 c0 44 89 c0 c3 31 d2 8a
04 16 88 04 17 48 ff c2 84 c0 75 f3 48 89 f8 c3 48 89 f9 eb 10 <8a> 06
3c 01 88 01 48 83 de ff 48 ff c1 48 ff ca 48 85 d2 75 eb
RIP [<ffffffff8036319a>] strncpy+0x5/0x1e
RSP <ffff88007b04fbc0>
CR2: 0000000000000000
---[ end trace 829d7d78dfafb785 ]---

The attached patch fixes the issue.

Signed-off-by: Shyam Iyer <shyam_iyer@dell.com>
Acked-by: Seokmann Ju <Seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-02-10 11:15:18 -05:00
Andrew Vasquez
f9932deb99 [SCSI] qla2xxx: Update version number to 8.03.00-k2.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25 07:59:31 -06:00
Seokmann Ju
3c01b4f9fb [SCSI] qla2xxx: Add checks for a valid fcport in dev-loss-tmo/terminate_rport_io callbacks.
Commit f78badb1ae ([SCSI] fc
transport: pre-emptively terminate i/o upon dev_loss_tmo timeout)
changed the callback semantics of dev_loss_tmo and
terminate_rport_io such that repeated calls could be made.  This
could result in the the driver using stale (NULLed-out, in
dev_loss_tmo) data from the rport.  Correct this by addint a
simple check to ensure a valid fcport is attached.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25 07:59:12 -06:00
Andrew Vasquez
53303c42d5 [SCSI] qla2xxx: Correct regression in DMA-mask setting prior to allocations.
Jeremy Higdon noted
(http://marc.info/?l=linux-scsi&m=123262143131788&w=2) that the
rework done in commit e315cd28b9
was not setting the proper consistent and streaming DMA masks
prior to memory allocations.  Correct this and remove the
unnecessary prototype.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25 07:58:55 -06:00
Joe Carnuccio
b872ca4081 [SCSI] qla2xxx: Correct descriptions in flash manipulation routines.
When clearing the flash device's SR, the comment is incorrect...
clearing the SR is 2 steps:

1. the SR protect bit is 1, so the first write zero clears only
   that bit,

2. the SR protect bit is now 0, so the next write zero clears the
   remaining bits.

The sector erase debug print more correctly identifies that the erase failed.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25 07:58:37 -06:00
Andrew Vasquez
2ac4b64f74 [SCSI] qla2xxx: Correct regression in EH abort handling.
Commit 73208dfd7a (qla2xxx: add
support for multi-queue adapter) inadvertently backed-out the fix
in 5bff55db3d (qla2xxx: Return a
FAILED status when abort mailbox-command fails.).

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25 07:58:19 -06:00
Andrew Vasquez
7c283177fa [SCSI] qla2xxx: Correct endianness issue during flash manipulation.
The flash data was incorrectly being converted (cpu_to_le32())
when using the bulk-flash-write mailbox command (ISP25xx and
above).

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25 07:57:49 -06:00
Lalit Chandivade
ad038fa824 [SCSI] qla2xxx: Correct MSI-X vector allocation for single queue mode.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25 07:57:26 -06:00
Andrew Vasquez
eaac30be26 [SCSI] qla2xxx: Modify firmware-load order precedence for ISP81XX parts.
Pre-ISP81XX parts (including ISP24xx and ISP25xx) could contain a
firmware image within a segment of flash, driver would fallback
to loading this firmware if the request-firmware interface failed
(userspace .bin file).  Moving forward, all ISP81XX parts will
ship with a suggested-to-be-used firmware image within flash
which all driver should first attempt to load.  If the flash
firmware load fails, the driver will then fallback to loading
firmware via the request-firmware interface (ql8100_fw.bin).

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25 07:57:08 -06:00
Andrew Vasquez
8eca3f39c4 [SCSI] qla2xxx: Always serialize mailbox command execution.
Original code would incorrectly bypass serialization if the DPC
thread were performing a big-hammer operation (ISP abort).  This
short circuit, though rare, would subsequently stomp on a
secondary thread's mailbox command execution.  Found during
ISP81XX testing.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25 07:56:52 -06:00
Andrew Vasquez
09ff36d30c [SCSI] qla2xxx: Ensure RISC-interrupt-enabled consistency for IS_NOPOLLING_TYPE() ISPs.
Original code should work as well given qla24xx_reset_adapter()
is only called in extreme cases where the HBA is taken offline.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25 07:56:35 -06:00
Andrew Vasquez
85d0acbb2e [SCSI] qla2xxx: Simplify sector-mask calculation in preparation for larger flash parts.
Also removes unneeded 'findex' local variable within routine.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25 07:56:16 -06:00
Anirban Chakraborty
6e9f21f3d3 [SCSI] qla2xxx: Fix memory leak in error path
Reviewed-by:  Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25 07:55:42 -06:00
Anirban Chakraborty
29bdccbee6 [SCSI] qla2xxx: Fix ISP restart bug in multiq code
After restarting ISP the additional queues are not being setup correctly. The
following patch fixes the issue.
Please apply.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-13 10:36:01 -06:00
Andrew Vasquez
ffda8c7dc4 [SCSI] qla2xxx: Update version number to 8.03.00-k1.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07 15:52:04 -06:00
Andrew Vasquez
3a03eb797c [SCSI] qla2xxx: Add ISP81XX support.
Codes to support new FCoE boards.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07 15:51:44 -06:00
Andrew Vasquez
444786d7fd [SCSI] qla2xxx: Use proper request/response queues with MQ instantiations.
Original code would inadvertanly place I/Os on the default
request-queue.  Also, correctly pass in the proper MSI-X vector
during response-queue initialization.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07 15:51:20 -06:00
Andrew Vasquez
d63ab53394 [SCSI] qla2xxx: Correct MQ-chain information retrieval during a firmware dump.
Original code would not read request/response queue pointers.
Also, collapse code into a helper qla25xx_copy_mq() function in
preparation for newer ISP parts.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07 15:50:59 -06:00
Andrew Vasquez
bb99de6703 [SCSI] qla2xxx: Collapse EFT/FCE copy procedures during a firmware dump.
In preparation for new ISP types with varying dump procedures.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07 15:50:31 -06:00
Andrew Vasquez
3fd67cdf9e [SCSI] qla2xxx: Don't pollute kernel logs with ZIO/RIO status messages.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07 15:50:09 -06:00
Andrew Vasquez
124f85e6cc [SCSI] qla2xxx: Don't fallback to interrupt-polling during re-initialization with MSI-X enabled.
ROMs in recent ISPs have MSI-X support, so it's no longer
necessary for the driver to fallback to interrupt polling during
ISP re-initialization.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07 15:49:45 -06:00
Andrew Vasquez
1ded85e285 [SCSI] qla2xxx: Remove support for reading/writing HW-event-log.
Software should not touch this region of flash, as the firmware
will be the only writer and consumer of the region.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07 15:49:15 -06:00
Anirban Chakraborty
17d98630a4 [SCSI] qla2xxx: changes in multiq code
Following changes have been made:
 1. Scan outstanding commands only in the queue where it is submitted
 2. Update queue registers directly in the fast path
 3. Queue specific BAR is remapped only for multiq capable adapters

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:35 -06:00
Anirban Chakraborty
73208dfd7a [SCSI] qla2xxx: add support for multi-queue adapter
Following changes have been made.
1. qla_hw_data structure holds an array for request queue pointers,
and an array for response queue pointers.
2. The base request and response queues are created by default.
3. Additional request and response queues are created at the time of vport
creation. If queue resources are exhausted during vport creation, newly
created vports use the default queue.
4. Requests are sent to the request queue that the vport was assigned
in the beginning.
5. Responses are completed on the response queue with which the request queue
is associated with.

[fixup memcpy argument reversal spotted by davej@redhat.com]
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:33 -06:00
Anirban Chakraborty
749af3d54a [SCSI] qla2xxx: Code changes for vport bus reset
The following patch changes the handling of bus reset when issued from a
vport. In the bus reset code, an extra check is made to make sure that the lip
reset is not done before resetting the targets if the bus reset came from a
vport.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:19 -06:00
Anirban Chakraborty
c51da4ecb0 [SCSI] qla2xxx: Fix for build warning
drivers/scsi/qla2xxx/qla_os.c: In function 'qla2x00_probe_one':
drivers/scsi/qla2xxx/qla_os.c:1582: warning: 'mem_only' is used uninitialized in this function

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:16 -06:00
Anirban Chakraborty
e315cd28b9 [SCSI] qla2xxx: Code changes for qla data structure refactoring
Following changes have been made:

1. Outstanding commands are based on a request queue, scsi_qla_host
   does not maintain it anymore.

2. start_scsi is accessed via isp_ops struct instead of direct
   invocation.

3. Interrupt registrations are done using response queue instead of
   device id.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:16 -06:00
Anirban Chakraborty
7b867cf76f [SCSI] qla2xxx: Refactor qla data structures
Following changes have been made to the qla2xxx FC driver in
preparation for the multi- queue and future SR IOV hardware.

1. scsi_qla_host structure has been changed to contain scsi host
   specific data only.

2. A new structure, qla_hw_data is created to contain HBA specific
   hardware data.

3. Request and response IO specific data strucures are created.

4. The global list of fcports for the hba is not maintained anymore,
   instead a fcport list is construted on per scsi_qla_host.

Signed-of-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-12-29 11:24:15 -06:00
Andrew Vasquez
3869a17288 [SCSI] qla2xxx: Update version number to 8.02.01-k9.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05 12:42:29 -05:00
Michael Reed
5bff55db3d [SCSI] qla2xxx: Return a FAILED status when abort mailbox-command fails.
Mike Reed noted
(https://bugzilla.novell.com/show_bug.cgi?id=421330) that the
driver was incorrectly returning a SUCCESS status if the driver's
request to the firmware to abort a command failed.  By doing so,
the mid-layer believed, incorrectly, that the command has
completed and has been returned (ultimately clearing
scsi_cmnd.request_buffer) yet the driver still has the command.
What should correctly happen is a mid-layer escalation
(device-reset, etc.) of recovery during which the driver will
eventually return the outstanding commands to the mid-layer.

Cc: Stable Tree <stable@kernel.org>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05 12:42:12 -05:00
Shyam Sundar
680d7db88a [SCSI] qla2xxx: Do not honour max_vports from firmware for 2G ISPs and below.
For 23XX ISPs, max_vports may return an invalid value.
Do not honour it.

Cc: Stable Tree <stable@kernel.org>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05 12:41:49 -05:00
Andrew Vasquez
737faece27 [SCSI] qla2xxx: Use pci_disable_rom() to manipulate PCI config space.
http://bugzilla.kernel.org/show_bug.cgi?id=9422

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05 12:41:28 -05:00
Lalit Chandivade
821b399600 [SCSI] qla2xxx: Correct Atmel flash-part handling.
Use correct block size (4K) for erase command 0x20 for Atmel
Flash. Use dword addresses for determining sector boundary.

Cc: Stable Tree <stable@kernel.org>
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-05 12:41:06 -05:00
Jesse Barnes
0927678f55 PCI: use pci_find_ext_capability everywhere
Remove some open coded (and buggy) versions of pci_find_ext_capability
in favor of the real routine in the PCI core.

Tested-by: Tomasz Czernecki <czernecki@gmail.com>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 11:01:51 -07:00
Yinghai Lu
16dbef4a83 PCI: change MSI-x vector to 32bit
We are using 28bit pci (bus/dev/fn + 12 bits) as irq number, so the
cache for irq number should be 32 bit too.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 10:53:42 -07:00
Mike Christie
056a448349 [SCSI] qla2xxx: use new host byte transport errors.
This has qla2xxx use the new transport error values instead of
DID_BUS_BUSY. I am not sure if all the errors
in qla_isr.c I changed are transport related. We end up blocking/deleting
the rport for all of them so it is better to use the new transport error since
the fc classs will decide when to fail the IO.

With this patch if I pull a cable then IO that had reached
the driver, will be failed with DID_TRANSPORT_DISRUPTED (not including
tape). The fc class will then fail the IO when the fast io fail tmo
has fired, and the driver will flush any other commands running.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:51 -04:00
Mike Christie
9cc328f502 [SCSI] ibmvfc, qla2xxx, lpfc: remove scsi_target_unblock calls in terminate callbacks
The fc class now calls scsi_target_unblock after calling the
terminate callback, so this patch removes the calls from the
drivers.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:48 -04:00
Mike Christie
7b594131c4 [SCSI] qla2xxx: return SCSI_MLQUEUE_TARGET_BUSY when driver has detected rport error or race
If the fcport is not online then we do not want to block IO to all ports on
the host. We just want to stop IO on port not online, so we should be using
the SCSI_MLQUEUE_TARGET_BUSY return value.

For the case where we race with the rport memset initialization
we do not want the queuecommand to be called again so we can just use
SCSI_MLQUEUE_TARGET_BUSY for this.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:46 -04:00
Alexander Beregalov
4a3e1ea8b2 [SCSI] qla2xxx: fix printk format warnings
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-03 11:46:19 -05:00