Commit Graph

267 Commits

Author SHA1 Message Date
Vincent Li
f168e1b639 mm/vmscan: remove page_queue_congested() comment
Commit 084f71ae5c(kill page_queue_congested()) removed
page_queue_congested().  Remove the page_queue_congested() comment in
vmscan pageout() too.

Signed-off-by: Vincent Li <macli@brc.ubc.ca>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:39 -07:00
Wu Fengguang
f862963174 mm: do batched scans for mem_cgroup
For mem_cgroup, shrink_zone() may call shrink_list() with nr_to_scan=1, in
which case shrink_list() _still_ calls isolate_pages() with the much
larger SWAP_CLUSTER_MAX.  It effectively scales up the inactive list scan
rate by up to 32 times.

For example, with 16k inactive pages and DEF_PRIORITY=12, (16k >> 12)=4.
So when shrink_zone() expects to scan 4 pages in the active/inactive list,
the active list will be scanned 4 pages, while the inactive list will be
(over) scanned SWAP_CLUSTER_MAX=32 pages in effect.  And that could break
the balance between the two lists.

It can further impact the scan of anon active list, due to the anon
active/inactive ratio rebalance logic in balance_pgdat()/shrink_zone():

inactive anon list over scanned => inactive_anon_is_low() == TRUE
                                => shrink_active_list()
                                => active anon list over scanned

So the end result may be

- anon inactive  => over scanned
- anon active    => over scanned (maybe not as much)
- file inactive  => over scanned
- file active    => under scanned (relatively)

The accesses to nr_saved_scan are not lock protected and so not 100%
accurate, however we can tolerate small errors and the resulted small
imbalanced scan rates between zones.

Cc: Rik van Riel <riel@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:39 -07:00
Vincent Li
0b21767637 mm/vmscan: rename zone_nr_pages() to zone_nr_lru_pages()
The name `zone_nr_pages' can be mis-read as zone's (total) number pages,
but it actually returns zone's LRU list number pages.

Signed-off-by: Vincent Li <macli@brc.ubc.ca>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:38 -07:00
Johannes Weiner
ceddc3a52d mm: document is_page_cache_freeable()
Enlighten the reader of this code about what reference count makes a page
cache page freeable.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:38 -07:00
Johannes Weiner
edcf4748cd mm: return boolean from page_has_private()
Make page_has_private() return a true boolean value and remove the double
negations from the two callsites using it for arithmetic.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:38 -07:00
Johannes Weiner
6c0b13519d mm: return boolean from page_is_file_cache()
page_is_file_cache() has been used for both boolean checks and LRU
arithmetic, which was always a bit weird.

Now that page_lru_base_type() exists for LRU arithmetic, make
page_is_file_cache() a real predicate function and adjust the
boolean-using callsites to drop those pesky double negations.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:37 -07:00
Johannes Weiner
401a8e1c16 mm: introduce page_lru_base_type()
Instead of abusing page_is_file_cache() for LRU list index arithmetic, add
another helper with a more appropriate name and convert the non-boolean
users of page_is_file_cache() accordingly.

This new helper gives the LRU base type a page is supposed to live on,
inactive anon or inactive file.

[hugh.dickins@tiscali.co.uk: convert del_page_from_lru() also]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:35 -07:00
Johannes Weiner
b7c46d151c mm: drop unneeded double negations
Remove double negations where the operand is already boolean.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:35 -07:00
KOSAKI Motohiro
a26f5320c4 vmscan: kill unnecessary prefetch
The pages in the list passed move_active_pages_to_lru() are already
touched by shrink_active_list().  IOW the prefetch in
move_active_pages_to_lru() don't populate any cache.  it's pointless.

This patch remove it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:30 -07:00
KOSAKI Motohiro
74a1c48fb4 vmscan: kill unnecessary page flag test
The page_lru() already evaluate PageActive() and PageSwapBacked().  We
don't need to re-evaluate it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:30 -07:00
KOSAKI Motohiro
5205e56eea vmscan: move ClearPageActive from move_active_pages() to shrink_active_list()
The move_active_pages_to_lru() function is called under irq disabled and
ClearPageActive() doesn't need irq disabling.

Then, this patch move it into shrink_active_list().

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:30 -07:00
Minchan Kim
de2e7567c7 vmscan: don't attempt to reclaim anon page in lumpy reclaim when no swap space is available
The VM already avoids attempting to reclaim anon pages in various places,
But it doesn't avoid it for lumpy reclaim.

It shuffles lru list unnecessary so that it is pointless.

[akpm@linux-foundation.org: cleanup]
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:30 -07:00
Wu Fengguang
adea02a1be mm: count only reclaimable lru pages
global_lru_pages() / zone_lru_pages() can be used in two ways:
- to estimate max reclaimable pages in determine_dirtyable_memory()
- to calculate the slab scan ratio

When swap is full or not present, the anon lru lists are not reclaimable
and also won't be scanned.  So the anon pages shall not be counted in both
usage scenarios.  Also rename to _reclaimable_pages: now they are counting
the possibly reclaimable lru pages.

It can greatly (and correctly) increase the slab scan rate under high
memory pressure (when most file pages have been reclaimed and swap is
full/absent), thus reduce false OOM kills.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: David Howells <dhowells@redhat.com>
Cc: "Li, Ming Chun" <macli@brc.ubc.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:30 -07:00
Rik van Riel
35cd78156c vmscan: throttle direct reclaim when too many pages are isolated already
When way too many processes go into direct reclaim, it is possible for all
of the pages to be taken off the LRU.  One result of this is that the next
process in the page reclaim code thinks there are no reclaimable pages
left and triggers an out of memory kill.

One solution to this problem is to never let so many processes into the
page reclaim path that the entire LRU is emptied.  Limiting the system to
only having half of each inactive list isolated for reclaim should be
safe.

Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:29 -07:00
KOSAKI Motohiro
a731286de6 mm: vmstat: add isolate pages
If the system is running a heavy load of processes then concurrent reclaim
can isolate a large number of pages from the LRU. /proc/vmstat and the
output generated for an OOM do not show how many pages were isolated.

This has been observed during process fork bomb testing (mstctl11 in LTP).

This patch shows the information about isolated pages.

Reproduced via:

-----------------------
% ./hackbench 140 process 1000
   => OOM occur

active_anon:146 inactive_anon:0 isolated_anon:49245
 active_file:79 inactive_file:18 isolated_file:113
 unevictable:0 dirty:0 writeback:0 unstable:0 buffer:39
 free:370 slab_reclaimable:309 slab_unreclaimable:5492
 mapped:53 shmem:15 pagetables:28140 bounce:0

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:29 -07:00
KOSAKI Motohiro
b35ea17b7b mm: shrink_inactive_list() nr_scan accounting fix fix
If sc->isolate_pages() return 0, we don't need to call shrink_page_list().
In past days, shrink_inactive_list() handled it properly.

But commit fb8d14e1 (three years ago commit!) breaked it.  current
shrink_inactive_list() always call shrink_page_list() although
isolate_pages() return 0.

This patch restore proper return value check.

Requirements:
  o "nr_taken == 0" condition should stay before calling shrink_page_list().
  o "nr_taken == 0" condition should stay after nr_scan related statistics
     modification.

Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:28 -07:00
KOSAKI Motohiro
44c241f166 mm: rename pgmoved variable in shrink_active_list()
Currently the pgmoved variable has two meanings.  It causes harder
reviewing.  This patch separates it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:27 -07:00
Jens Axboe
03ba3782e8 writeback: switch to per-bdi threads for flushing data
This gets rid of pdflush for bdi writeout and kupdated style cleaning.
pdflush writeout suffers from lack of locality and also requires more
threads to handle the same workload, since it has to work in a
non-blocking fashion against each queue. This also introduces lumpy
behaviour and potential request starvation, since pdflush can be starved
for queue access if others are accessing it. A sample ffsb workload that
does random writes to files is about 8% faster here on a simple SATA drive
during the benchmark phase. File layout also seems a LOT more smooth in
vmstat:

 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
 0  1      0 608848   2652 375372    0    0     0 71024  604    24  1 10 48 42
 0  1      0 549644   2712 433736    0    0     0 60692  505    27  1  8 48 44
 1  0      0 476928   2784 505192    0    0     4 29540  553    24  0  9 53 37
 0  1      0 457972   2808 524008    0    0     0 54876  331    16  0  4 38 58
 0  1      0 366128   2928 614284    0    0     4 92168  710    58  0 13 53 34
 0  1      0 295092   3000 684140    0    0     0 62924  572    23  0  9 53 37
 0  1      0 236592   3064 741704    0    0     4 58256  523    17  0  8 48 44
 0  1      0 165608   3132 811464    0    0     0 57460  560    21  0  8 54 38
 0  1      0 102952   3200 873164    0    0     4 74748  540    29  1 10 48 41
 0  1      0  48604   3252 926472    0    0     0 53248  469    29  0  7 47 45

where vanilla tends to fluctuate a lot in the creation phase:

 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
 1  1      0 678716   5792 303380    0    0     0 74064  565    50  1 11 52 36
 1  0      0 662488   5864 319396    0    0     4   352  302   329  0  2 47 51
 0  1      0 599312   5924 381468    0    0     0 78164  516    55  0  9 51 40
 0  1      0 519952   6008 459516    0    0     4 78156  622    56  1 11 52 37
 1  1      0 436640   6092 541632    0    0     0 82244  622    54  0 11 48 41
 0  1      0 436640   6092 541660    0    0     0     8  152    39  0  0 51 49
 0  1      0 332224   6200 644252    0    0     4 102800  728    46  1 13 49 36
 1  0      0 274492   6260 701056    0    0     4 12328  459    49  0  7 50 43
 0  1      0 211220   6324 763356    0    0     0 106940  515    37  1 10 51 39
 1  0      0 160412   6376 813468    0    0     0  8224  415    43  0  6 49 45
 1  1      0  85980   6452 886556    0    0     4 113516  575    39  1 11 54 34
 0  2      0  85968   6452 886620    0    0     0  1640  158   211  0  0 46 54

A 10 disk test with btrfs performs 26% faster with per-bdi flushing. A
SSD based writeback test on XFS performs over 20% better as well, with
the throughput being very stable around 1GB/sec, where pdflush only
manages 750MB/sec and fluctuates wildly while doing so. Random buffered
writes to many files behave a lot better as well, as does random mmap'ed
writes.

A separate thread is added to sync the super blocks. In the long term,
adding sync_supers_bdi() functionality could get rid of this thread again.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11 09:20:25 +02:00
Minchan Kim
03ef83af52 mm: fix for infinite churning of mlocked pages
An mlocked page might lose the isolatation race.  This causes the page to
clear PG_mlocked while it remains in a VM_LOCKED vma.  This means it can
be put onto the [in]active list.  We can rescue it by using try_to_unmap()
in shrink_page_list().

But now, As Wu Fengguang pointed out, vmscan has a bug.  If the page has
PG_referenced, it can't reach try_to_unmap() in shrink_page_list() but is
put into the active list.  If the page is referenced repeatedly, it can
remain on the [in]active list without being moving to the unevictable
list.

This patch fixes it.

Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KOSAKI Motohiro <<kosaki.motohiro@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-26 20:06:52 -07:00
Jens Axboe
8aa7e847d8 Fix congestion_wait() sync/async vs read/write confusion
Commit 1faa16d228 accidentally broke
the bdi congestion wait queue logic, causing us to wait on congestion
for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-10 20:31:53 +02:00
KAMEZAWA Hiroyuki
cb4cbcf6b3 mm: fix incorrect page removal from LRU
The isolated page is "cursor_page" not "page".

This could cause LRU list corruption under memory pressure, caught by
CONFIG_DEBUG_LIST.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-23 10:17:28 -07:00
KAMEZAWA Hiroyuki
2ffebca6aa memcg: fix lru rotation in isolate_pages
Try to fix memcg's lru rotation sanity: make memcg use the same logic as
the global LRU does.

Now, at __isolate_lru_page() retruns -EBUSY, the page is rotated to the
tail of LRU in global LRU's isolate LRU pages.  But in memcg, it's not
handled.  This makes memcg do the same behavior as global LRU and rotate
LRU in the page is busy.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:48 -07:00
KAMEZAWA Hiroyuki
ee993b135e mm: fix lumpy reclaim lru handling at isolate_lru_pages
At lumpy reclaim, a page failed to be taken by __isolate_lru_page() can be
pushed back to "src" list by list_move().  But the page may not be from
"src" list.  This pushes the page back to wrong LRU.  And list_move()
itself is unnecessary because the page is not on top of LRU.  Then, leave
it as it is if __isolate_lru_page() fails.

Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:46 -07:00
Mel Gorman
24cf72518c vmscan: count the number of times zone_reclaim() scans and fails
On NUMA machines, the administrator can configure zone_reclaim_mode that
is a more targetted form of direct reclaim.  On machines with large NUMA
distances for example, a zone_reclaim_mode defaults to 1 meaning that
clean unmapped pages will be reclaimed if the zone watermarks are not
being met.

There is a heuristic that determines if the scan is worthwhile but it is
possible that the heuristic will fail and the CPU gets tied up scanning
uselessly.  Detecting the situation requires some guesswork and
experimentation so this patch adds a counter "zreclaim_failed" to
/proc/vmstat.  If during high CPU utilisation this counter is increasing
rapidly, then the resolution to the problem may be to set
/proc/sys/vm/zone_reclaim_mode to 0.

[akpm@linux-foundation.org: name things consistently]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:46 -07:00
Mel Gorman
fa5e084e43 vmscan: do not unconditionally treat zones that fail zone_reclaim() as full
On NUMA machines, the administrator can configure zone_reclaim_mode that
is a more targetted form of direct reclaim.  On machines with large NUMA
distances for example, a zone_reclaim_mode defaults to 1 meaning that
clean unmapped pages will be reclaimed if the zone watermarks are not
being met.  The problem is that zone_reclaim() failing at all means the
zone gets marked full.

This can cause situations where a zone is usable, but is being skipped
because it has been considered full.  Take a situation where a large tmpfs
mount is occuping a large percentage of memory overall.  The pages do not
get cleaned or reclaimed by zone_reclaim(), but the zone gets marked full
and the zonelist cache considers them not worth trying in the future.

This patch makes zone_reclaim() return more fine-grained information about
what occured when zone_reclaim() failued.  The zone only gets marked full
if it really is unreclaimable.  If it's a case that the scan did not occur
or if enough pages were not reclaimed with the limited reclaim_mode, then
the zone is simply skipped.

There is a side-effect to this patch.  Currently, if zone_reclaim()
successfully reclaimed SWAP_CLUSTER_MAX, an allocation attempt would go
ahead.  With this patch applied, zone watermarks are rechecked after
zone_reclaim() does some work.

This bug was introduced by commit 9276b1bc96
("memory page_alloc zonelist caching speedup") way back in 2.6.19 when the
zonelist_cache was introduced.  It was not intended that zone_reclaim()
aggressively consider the zone to be full when it failed as full direct
reclaim can still be an option.  Due to the age of the bug, it should be
considered a -stable candidate.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:45 -07:00
Mel Gorman
90afa5de6f vmscan: properly account for the number of page cache pages zone_reclaim() can reclaim
A bug was brought to my attention against a distro kernel but it affects
mainline and I believe problems like this have been reported in various
guises on the mailing lists although I don't have specific examples at the
moment.

The reported problem was that malloc() stalled for a long time (minutes in
some cases) if a large tmpfs mount was occupying a large percentage of
memory overall.  The pages did not get cleaned or reclaimed by
zone_reclaim() because the zone_reclaim_mode was unsuitable, but the lists
are uselessly scanned frequencly making the CPU spin at near 100%.

This patchset intends to address that bug and bring the behaviour of
zone_reclaim() more in line with expectations which were noticed during
investigation.  It is based on top of mmotm and takes advantage of
Kosaki's work with respect to zone_reclaim().

Patch 1 fixes the heuristics that zone_reclaim() uses to determine if the
	scan should go ahead. The broken heuristic is what was causing the
	malloc() stall as it uselessly scanned the LRU constantly. Currently,
	zone_reclaim is assuming zone_reclaim_mode is 1 and historically it
	could not deal with tmpfs pages at all. This fixes up the heuristic so
	that an unnecessary scan is more likely to be correctly avoided.

Patch 2 notes that zone_reclaim() returning a failure automatically means
	the zone is marked full. This is not always true. It could have
	failed because the GFP mask or zone_reclaim_mode were unsuitable.

Patch 3 introduces a counter zreclaim_failed that will increment each
	time the zone_reclaim scan-avoidance heuristics fail. If that
	counter is rapidly increasing, then zone_reclaim_mode should be
	set to 0 as a temporarily resolution and a bug reported because
	the scan-avoidance heuristic is still broken.

This patch:

On NUMA machines, the administrator can configure zone_reclaim_mode that
is a more targetted form of direct reclaim.  On machines with large NUMA
distances for example, a zone_reclaim_mode defaults to 1 meaning that
clean unmapped pages will be reclaimed if the zone watermarks are not
being met.

There is a heuristic that determines if the scan is worthwhile but the
problem is that the heuristic is not being properly applied and is
basically assuming zone_reclaim_mode is 1 if it is enabled.  The lack of
proper detection can manfiest as high CPU usage as the LRU list is scanned
uselessly.

Historically, once enabled it was depending on NR_FILE_PAGES which may
include swapcache pages that the reclaim_mode cannot deal with.  Patch
vmscan-change-the-number-of-the-unmapped-files-in-zone-reclaim.patch by
Kosaki Motohiro noted that zone_page_state(zone, NR_FILE_PAGES) included
pages that were not file-backed such as swapcache and made a calculation
based on the inactive, active and mapped files.  This is far superior when
zone_reclaim==1 but if RECLAIM_SWAP is set, then NR_FILE_PAGES is a
reasonable starting figure.

This patch alters how zone_reclaim() works out how many pages it might be
able to reclaim given the current reclaim_mode.  If RECLAIM_SWAP is set in
the reclaim_mode it will either consider NR_FILE_PAGES as potential
candidates or else use NR_{IN}ACTIVE}_PAGES-NR_FILE_MAPPED to discount
swapcache and other non-file-backed pages.  If RECLAIM_WRITE is not set,
then NR_FILE_DIRTY number of pages are not candidates.  If RECLAIM_SWAP is
not set, then NR_FILE_MAPPED are not.

[kosaki.motohiro@jp.fujitsu.com: Estimate unmapped pages minus tmpfs pages]
[fengguang.wu@intel.com: Fix underflow problem in Kosaki's estimate]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:45 -07:00
Daisuke Nishimura
9198e96c06 vmscan: handle may_swap more strictly
Commit 2e2e425989 ("vmscan,memcg:
reintroduce sc->may_swap) add may_swap flag and handle it at
get_scan_ratio().

But the result of get_scan_ratio() is ignored when priority == 0, so anon
lru is scanned even if may_swap == 0 or nr_swap_pages == 0.  IMHO, this is
not an expected behavior.

As for memcg especially, because of this behavior many and many pages are
swapped-out just in vain when oom is invoked by mem+swap limit.

This patch is for handling may_swap flag more strictly.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:45 -07:00
Wu Fengguang
3eb4140f03 vmscan: merge duplicate code in shrink_active_list()
The "move pages to active list" and "move pages to inactive list" code
blocks are mostly identical and can be served by a function.

Thanks to Andrew Morton for pointing this out.

Note that buffer_heads_over_limit check will also be carried out for
re-activated pages, which is slightly different from pre-2.6.28 kernels.
Also, Rik's "vmscan: evict use-once pages first" patch could totally stop
scans of active file list when memory pressure is low.  So the net effect
could be, the number of buffer heads is now more likely to grow large.

However that's fine according to Johannes' comments:

  I don't think that this could be harmful.  We just preserve the buffer
  mappings of what we consider the working set and with low memory
  pressure, as you say, this set is not big.

  As to stripping of reactivated pages: the only pages we re-activate
  for now are those VM_EXEC mapped ones.  Since we don't expect IO from
  or to these pages, removing the buffer mappings in case they grow too
  large should be okay, I guess.

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:45 -07:00
Wu Fengguang
8cab4754d2 vmscan: make mapped executable pages the first class citizen
Protect referenced PROT_EXEC mapped pages from being deactivated.

PROT_EXEC(or its internal presentation VM_EXEC) pages normally belong to some
currently running executables and their linked libraries, they shall really be
cached aggressively to provide good user experiences.

Thanks to Johannes Weiner for the advice to reuse the VMA walk in
page_referenced() to get the PROT_EXEC bit.

[more details]

( The consequences of this patch will have to be discussed together with
  Rik van Riel's recent patch "vmscan: evict use-once pages first". )

( Some of the good points and insights are taken into this changelog.
  Thanks to all the involved people for the great LKML discussions. )

the problem
===========

For a typical desktop, the most precious working set is composed of
*actively accessed*
	(1) memory mapped executables
	(2) and their anonymous pages
	(3) and other files
	(4) and the dcache/icache/.. slabs
while the least important data are
	(5) infrequently used or use-once files

For a typical desktop, one major problem is busty and large amount of (5)
use-once files flushing out the working set.

Inside the working set, (4) dcache/icache have already been too sticky ;-)
So we only have to care (2) anonymous and (1)(3) file pages.

anonymous pages
===============

Anonymous pages are effectively immune to the streaming IO attack, because we
now have separate file/anon LRU lists. When the use-once files crowd into the
file LRU, the list's "quality" is significantly lowered. Therefore the scan
balance policy in get_scan_ratio() will choose to scan the (low quality) file
LRU much more frequently than the anon LRU.

file pages
==========

Rik proposed to *not* scan the active file LRU when the inactive list grows
larger than active list. This guarantees that when there are use-once streaming
IO, and the working set is not too large(so that active_size < inactive_size),
the active file LRU will *not* be scanned at all. So the not-too-large working
set can be well protected.

But there are also situations where the file working set is a bit large so that
(active_size >= inactive_size), or the streaming IOs are not purely use-once.
In these cases, the active list will be scanned slowly. Because the current
shrink_active_list() policy is to deactivate active pages regardless of their
referenced bits. The deactivated pages become susceptible to the streaming IO
attack: the inactive list could be scanned fast (500MB / 50MBps = 10s) so that
the deactivated pages don't have enough time to get re-referenced. Because a
user tend to switch between windows in intervals from seconds to minutes.

This patch holds mapped executable pages in the active list as long as they
are referenced during each full scan of the active list.  Because the active
list is normally scanned much slower, they get longer grace time (eg. 100s)
for further references, which better matches the pace of user operations.

Therefore this patch greatly prolongs the in-cache time of executable code,
when there are moderate memory pressures.

	before patch: guaranteed to be cached if reference intervals < I
	after  patch: guaranteed to be cached if reference intervals < I+A
		      (except when randomly reclaimed by the lumpy reclaim)
where
	A = time to fully scan the   active file LRU
	I = time to fully scan the inactive file LRU

Note that normally A >> I.

side effects
============

This patch is safe in general, it restores the pre-2.6.28 mmap() behavior
but in a much smaller and well targeted scope.

One may worry about some one to abuse the PROT_EXEC heuristic.  But as
Andrew Morton stated, there are other tricks to getting that sort of boost.

Another concern is the PROT_EXEC mapped pages growing large in rare cases,
and therefore hurting reclaim efficiency. But a sane application targeted for
large audience will never use PROT_EXEC for data mappings. If some home made
application tries to abuse that bit, it shall be aware of the consequences.
If it is abused to scale of 2/3 total memory, it gains nothing but overheads.

benchmarks
==========

1) memory tight desktop

1.1) brief summary

- clock time and major faults are reduced by 50%;
- pswpin numbers are reduced to ~1/3.

That means X desktop responsiveness is doubled under high memory/swap pressure.

1.2) test scenario

- nfsroot gnome desktop with 512M physical memory
- run some programs, and switch between the existing windows
  after starting each new program.

1.3) progress timing (seconds)

  before       after    programs
    0.02        0.02    N xeyes
    0.75        0.76    N firefox
    2.02        1.88    N nautilus
    3.36        3.17    N nautilus --browser
    5.26        4.89    N gthumb
    7.12        6.47    N gedit
    9.22        8.16    N xpdf /usr/share/doc/shared-mime-info/shared-mime-info-spec.pdf
   13.58       12.55    N xterm
   15.87       14.57    N mlterm
   18.63       17.06    N gnome-terminal
   21.16       18.90    N urxvt
   26.24       23.48    N gnome-system-monitor
   28.72       26.52    N gnome-help
   32.15       29.65    N gnome-dictionary
   39.66       36.12    N /usr/games/sol
   43.16       39.27    N /usr/games/gnometris
   48.65       42.56    N /usr/games/gnect
   53.31       47.03    N /usr/games/gtali
   58.60       52.05    N /usr/games/iagno
   65.77       55.42    N /usr/games/gnotravex
   70.76       61.47    N /usr/games/mahjongg
   76.15       67.11    N /usr/games/gnome-sudoku
   86.32       75.15    N /usr/games/glines
   92.21       79.70    N /usr/games/glchess
  103.79       88.48    N /usr/games/gnomine
  113.84       96.51    N /usr/games/gnotski
  124.40      102.19    N /usr/games/gnibbles
  137.41      114.93    N /usr/games/gnobots2
  155.53      125.02    N /usr/games/blackjack
  179.85      135.11    N /usr/games/same-gnome
  224.49      154.50    N /usr/bin/gnome-window-properties
  248.44      162.09    N /usr/bin/gnome-default-applications-properties
  282.62      173.29    N /usr/bin/gnome-at-properties
  323.72      188.21    N /usr/bin/gnome-typing-monitor
  363.99      199.93    N /usr/bin/gnome-at-visual
  394.21      206.95    N /usr/bin/gnome-sound-properties
  435.14      224.49    N /usr/bin/gnome-at-mobility
  463.05      234.11    N /usr/bin/gnome-keybinding-properties
  503.75      248.59    N /usr/bin/gnome-about-me
  554.00      276.27    N /usr/bin/gnome-display-properties
  615.48      304.39    N /usr/bin/gnome-network-preferences
  693.03      342.01    N /usr/bin/gnome-mouse-properties
  759.90      388.58    N /usr/bin/gnome-appearance-properties
  937.90      508.47    N /usr/bin/gnome-control-center
 1109.75      587.57    N /usr/bin/gnome-keyboard-properties
 1399.05      758.16    N : oocalc
 1524.64      830.03    N : oodraw
 1684.31      900.03    N : ooimpress
 1874.04      993.91    N : oomath
 2115.12     1081.89    N : ooweb
 2369.02     1161.99    N : oowriter

Note that the last ": oo*" commands are actually commented out.

1.4) vmstat numbers (some relevant ones are marked with *)

                            before    after
 nr_free_pages              1293      3898
 nr_inactive_anon           59956     53460
 nr_active_anon             26815     30026
 nr_inactive_file           2657      3218
 nr_active_file             2019      2806
 nr_unevictable             4         4
 nr_mlock                   4         4
 nr_anon_pages              26706     27859
*nr_mapped                  3542      4469
 nr_file_pages              72232     67681
 nr_dirty                   1         0
 nr_writeback               123       19
 nr_slab_reclaimable        3375      3534
 nr_slab_unreclaimable      11405     10665
 nr_page_table_pages        8106      7864
 nr_unstable                0         0
 nr_bounce                  0         0
*nr_vmscan_write            394776    230839
 nr_writeback_temp          0         0
 numa_hit                   6843353   3318676
 numa_miss                  0         0
 numa_foreign               0         0
 numa_interleave            1719      1719
 numa_local                 6843353   3318676
 numa_other                 0         0
*pgpgin                     5954683   2057175
*pgpgout                    1578276   922744
*pswpin                     1486615   512238
*pswpout                    394568    230685
 pgalloc_dma                277432    56602
 pgalloc_dma32              6769477   3310348
 pgalloc_normal             0         0
 pgalloc_movable            0         0
 pgfree                     7048396   3371118
 pgactivate                 2036343   1471492
 pgdeactivate               2189691   1612829
 pgfault                    3702176   3100702
*pgmajfault                 452116    201343
 pgrefill_dma               12185     7127
 pgrefill_dma32             334384    653703
 pgrefill_normal            0         0
 pgrefill_movable           0         0
 pgsteal_dma                74214     22179
 pgsteal_dma32              3334164   1638029
 pgsteal_normal             0         0
 pgsteal_movable            0         0
 pgscan_kswapd_dma          1081421   1216199
 pgscan_kswapd_dma32        58979118  46002810
 pgscan_kswapd_normal       0         0
 pgscan_kswapd_movable      0         0
 pgscan_direct_dma          2015438   1086109
 pgscan_direct_dma32        55787823  36101597
 pgscan_direct_normal       0         0
 pgscan_direct_movable      0         0
 pginodesteal               3461      7281
 slabs_scanned              564864    527616
 kswapd_steal               2889797   1448082
 kswapd_inodesteal          14827     14835
 pageoutrun                 43459     21562
 allocstall                 9653      4032
 pgrotated                  384216    228631

1.5) free numbers at the end of the tests

before patch:
                             total       used       free     shared    buffers     cached
                Mem:           474        467          7          0          0        236
                -/+ buffers/cache:        230        243
                Swap:         1023        418        605

after patch:
                             total       used       free     shared    buffers     cached
                Mem:           474        457         16          0          0        236
                -/+ buffers/cache:        221        253
                Swap:         1023        404        619

2) memory flushing in a file server

2.1) brief summary

The number of major faults from 50 to 3 during 10% cache hot reads.

That means this patch successfully stops major faults when the active file
list is slowly scanned when there are partially cache hot streaming IO.

2.2) test scenario

Do 100000 pread(size=110 pages, offset=(i*100) pages), where 10% of the
pages will be activated:

        for i in `seq 0 100 10000000`; do echo $i 110;  done > pattern-hot-10
        iotrace.rb --load pattern-hot-10 --play /b/sparse
	vmmon  nr_mapped nr_active_file nr_inactive_file   pgmajfault pgdeactivate pgfree

and monitor /proc/vmstat during the time. The test box has 2G memory.

I carried out tests on fresh booted console as well as X desktop, and
fetched the vmstat numbers on

(1) begin:     shortly after the big read IO starts;
(2) end:       just before the big read IO stops;
(3) restore:   the big read IO stops and the zsh working set restored
(4) restore X: after IO, switch back and forth between the urxvt and firefox
               windows to restore their working set.

2.3) console mode results

        nr_mapped   nr_active_file nr_inactive_file       pgmajfault     pgdeactivate           pgfree

2.6.29 VM_EXEC protection ON:
begin:       2481             2237             8694              630                0           574299
end:          275           231976           233914              633           776271         20933042
restore:      370           232154           234524              691           777183         20958453

2.6.29 VM_EXEC protection ON (second run):
begin:       2434             2237             8493              629                0           574195
end:          284           231970           233536              632           771918         20896129
restore:      399           232218           234789              690           774526         20957909

2.6.30-rc4-mm VM_EXEC protection OFF:
begin:       2479             2344             9659              210                0           579643
end:          284           232010           234142              260           772776         20917184
restore:      379           232159           234371              301           774888         20967849

The above console numbers show that

- The startup pgmajfault of 2.6.30-rc4-mm is merely 1/3 that of 2.6.29.
  I'd attribute that improvement to the mmap readahead improvements :-)

- The pgmajfault increment during the file copy is 633-630=3 vs 260-210=50.
  That's a huge improvement - which means with the VM_EXEC protection logic,
  active mmap pages is pretty safe even under partially cache hot streaming IO.

- when active:inactive file lru size reaches 1:1, their scan rates is 1:20.8
  under 10% cache hot IO. (computed with formula Dpgdeactivate:Dpgfree)
  That roughly means the active mmap pages get 20.8 more chances to get
  re-referenced to stay in memory.

- The absolute nr_mapped drops considerably to 1/9 during the big IO, and the
  dropped pages are mostly inactive ones. The patch has almost no impact in
  this aspect, that means it won't unnecessarily increase memory pressure.
  (In contrast, your 20% mmap protection ratio will keep them all, and
  therefore eliminate the extra 41 major faults to restore working set
  of zsh etc.)

The iotrace.rb read throughput is
	151.194384MB/s 284.198252s 100001x 450560b --load pattern-hot-10 --play /b/sparse
which means the inactive list is rotated at the speed of 250MB/s,
so a full scan of which takes about 3.5 seconds, while a full scan
of active file list takes about 77 seconds.

2.4) X mode results

We can reach roughly the same conclusions for X desktop:

        nr_mapped   nr_active_file nr_inactive_file       pgmajfault     pgdeactivate           pgfree

2.6.30-rc4-mm VM_EXEC protection ON:
begin:       9740             8920            64075              561                0           678360
end:          768           218254           220029              565           798953         21057006
restore:      857           218543           220987              606           799462         21075710
restore X:   2414           218560           225344              797           799462         21080795

2.6.30-rc4-mm VM_EXEC protection OFF:
begin:       9368             5035            26389              554                0           633391
end:          770           218449           221230              661           646472         17832500
restore:     1113           218466           220978              710           649881         17905235
restore X:   2687           218650           225484              947           802700         21083584

- the absolute nr_mapped drops considerably (to 1/13 of the original size)
  during the streaming IO.
- the delta of pgmajfault is 3 vs 107 during IO, or 236 vs 393
  during the whole process.

Cc: Elladan <elladan@eskimo.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:44 -07:00
Wu Fengguang
6fe6b7e357 vmscan: report vm_flags in page_referenced()
Collect vma->vm_flags of the VMAs that actually referenced the page.

This is preparing for more informed reclaim heuristics, eg.  to protect
executable file pages more aggressively.  For now only the VM_EXEC bit
will be used by the caller.

Thanks to Johannes, Peter and Minchan for all the good tips.

Acked-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:44 -07:00
KAMEZAWA Hiroyuki
cb4b86ba47 mm: add swap cache interface for swap reference
In a following patch, the usage of swap cache is recorded into swap_map.
This patch is for necessary interface changes to do that.

2 interfaces:

  - swapcache_prepare()
  - swapcache_free()

are added for allocating/freeing refcnt from swap-cache to existing swap
entries.  But implementation itself is not changed under this patch.  At
adding swapcache_free(), memcg's hook code is moved under
swapcache_free().  This is better than using scattered hooks.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Balbir Singh <balbir@in.ibm.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:42 -07:00
KOSAKI Motohiro
6837765963 mm: remove CONFIG_UNEVICTABLE_LRU config option
Currently, nobody wants to turn UNEVICTABLE_LRU off.  Thus this
configurability is unnecessary.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andi Kleen <andi@firstfloor.org>
Acked-by: Minchan Kim <minchan.kim@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:42 -07:00
MinChan Kim
69c8548175 vmscan: prevent shrinking of active anon lru list in case of no swap space V3
shrink_zone() can deactivate active anon pages even if we don't have a
swap device.  Many embedded products don't have a swap device.  So the
deactivation of anon pages is unnecessary.

This patch prevents unnecessary deactivation of anon lru pages.  But, it
don't prevent aging of anon pages to swap out.

Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:41 -07:00
Wu Fengguang
af166777cf vmscan: ZVC updates in shrink_active_list() can be done once
This effectively lifts the unit of updates to nr_inactive_* and
pgdeactivate from PAGEVEC_SIZE=14 to SWAP_CLUSTER_MAX=32, or
MAX_ORDER_NR_PAGES=1024 for reclaim_zone().

Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:39 -07:00
Wu Fengguang
6e08a369ee vmscan: cleanup the scan batching code
The vmscan batching logic is twisting.  Move it into a standalone function
nr_scan_try_batch() and document it.  No behavior change.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:39 -07:00
Rik van Riel
56e49d2188 vmscan: evict use-once pages first
When the file LRU lists are dominated by streaming IO pages, evict those
pages first, before considering evicting other pages.

This should be safe from deadlocks or performance problems
because only three things can happen to an inactive file page:

1) referenced twice and promoted to the active list
2) evicted by the pageout code
3) under IO, after which it will get evicted or promoted

The pages freed in this way can either be reused for streaming IO, or
allocated for something else.  If the pages are used for streaming IO,
this pageout pattern continues.  Otherwise, we will fall back to the
normal pageout pattern.

Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Elladan <elladan@eskimo.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:38 -07:00
Mel Gorman
418589663d page allocator: use allocation flags as an index to the zone watermark
ALLOC_WMARK_MIN, ALLOC_WMARK_LOW and ALLOC_WMARK_HIGH determin whether
pages_min, pages_low or pages_high is used as the zone watermark when
allocating the pages.  Two branches in the allocator hotpath determine
which watermark to use.

This patch uses the flags as an array index into a watermark array that is
indexed with WMARK_* defines accessed via helpers.  All call sites that
use zone->pages_* are updated to use the helpers for accessing the values
and the array offsets for setting.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:35 -07:00
KOSAKI Motohiro
78dc583d3a vmscan: low order lumpy reclaim also should use PAGEOUT_IO_SYNC
Commit 33c120ed28 ("more aggressively use
lumpy reclaim") increased how aggressive lumpy reclaim was by isolating
both active and inactive pages for asynchronous lumpy reclaim on
costly-high-order pages and for cheap-high-order when memory pressure is
high.  However, if the system is under heavy pressure and there are dirty
pages, asynchronous IO may not be sufficient to reclaim a suitable page in
time.

This patch causes the caller to enter synchronous lumpy reclaim for
costly-high-order pages and for cheap-high-order pages when under memory
pressure.

Minchan.kim@gmail.com said:

Andy added synchronous lumpy reclaim with
c661b078fd.  At that time, lumpy reclaim is
not agressive.  His intension is just for high-order users.(above
PAGE_ALLOC_COSTLY_ORDER).

After some time, Rik added aggressive lumpy reclaim with
33c120ed28.  His intention was to do lumpy
reclaim when high-order users and trouble getting a small set of
contiguous pages.

So we also have to add synchronous pageout for small set of contiguous
pages.

Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <Minchan.kim@gmail.com>
Reviewed-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:31 -07:00
Rafael J. Wysocki
c6f37f1219 PM/Suspend: Do not shrink memory before suspend
Remove the shrinking of memory from the suspend-to-RAM code, where
it is not really necessary.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Nigel Cunningham <nigel@tuxonice.net>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
2009-06-12 21:32:32 +02:00
Daisuke Nishimura
e767e0561d memcg: fix deadlock between lock_page_cgroup and mapping tree_lock
mapping->tree_lock can be acquired from interrupt context.  Then,
following dead lock can occur.

Assume "A" as a page.

 CPU0:
       lock_page_cgroup(A)
		interrupted
			-> take mapping->tree_lock.
 CPU1:
       take mapping->tree_lock
		-> lock_page_cgroup(A)

This patch tries to fix above deadlock by moving memcg's hook to out of
mapping->tree_lock.  charge/uncharge of pagecache/swapcache is protected
by page lock, not tree_lock.

After this patch, lock_page_cgroup() is not called under mapping->tree_lock.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Andrew Morton
8713e01295 vmscan: avoid multiplication overflow in shrink_zone()
Local variable `scan' can overflow on zones which are larger than

	(2G * 4k) / 100 = 80GB.

Making it 64-bit on 64-bit will fix that up.

Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-02 15:36:10 -07:00
KOSAKI Motohiro
2e2e425989 vmscan,memcg: reintroduce sc->may_swap
Commit a6dc60f897 ("vmscan: rename
sc.may_swap to may_unmap") removed the may_swap flag, but memcg had used
it as a flag for "we need to use swap?", as the name indicate.

And in the current implementation, memcg cannot reclaim mapped file
caches when mem+swap hits the limit.

re-introduce may_swap flag and handle it at get_scan_ratio().  This
patch doesn't influence any scan_control users other than memcg.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21 13:41:51 -07:00
Rafael J. Wysocki
a21e255361 PM/Hibernate: Fix memory shrinking
Commit d979677c4c ("mm: shrink_all_memory(): use sc.nr_reclaimed")
broke the memory shrinking used by hibernation, becuse it did not update
shrink_all_zones() in accordance with the other changes it made.

Fix this by making shrink_all_zones() update sc->nr_reclaimed instead of
overwriting its value.

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=13058

Reported-and-tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-18 11:36:58 -07:00
Linus Torvalds
90975ef712 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: (36 commits)
  cpumask: remove cpumask allocation from idle_balance, fix
  numa, cpumask: move numa_node_id default implementation to topology.h, fix
  cpumask: remove cpumask allocation from idle_balance
  x86: cpumask: x86 mmio-mod.c use cpumask_var_t for downed_cpus
  x86: cpumask: update 32-bit APM not to mug current->cpus_allowed
  x86: microcode: cleanup
  x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c
  cpumask: fix CONFIG_CPUMASK_OFFSTACK=y cpu hotunplug crash
  numa, cpumask: move numa_node_id default implementation to topology.h
  cpumask: convert node_to_cpumask_map[] to cpumask_var_t
  cpumask: remove x86 cpumask_t uses.
  cpumask: use cpumask_var_t in uv_flush_tlb_others.
  cpumask: remove cpumask_t assignment from vector_allocation_domain()
  cpumask: make Xen use the new operators.
  cpumask: clean up summit's send_IPI functions
  cpumask: use new cpumask functions throughout x86
  x86: unify cpu_callin_mask/cpu_callout_mask/cpu_initialized_mask/cpu_sibling_setup_mask
  cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_t
  cpumask: convert node_to_cpumask_map[] to cpumask_var_t
  x86: unify 32 and 64-bit node_to_cpumask_map
  ...
2009-04-05 10:33:07 -07:00
David Howells
266cf658ef FS-Cache: Recruit a page flags for cache management
Recruit a page flag to aid in cache management.  The following extra flag is
defined:

 (1) PG_fscache (PG_private_2)

     The marked page is backed by a local cache and is pinning resources in the
     cache driver.

If PG_fscache is set, then things that checked for PG_private will now also
check for that.  This includes things like truncation and page invalidation.
The function page_has_private() had been added to make the checks for both
PG_private and PG_private_2 at the same time.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:36 +01:00
KAMEZAWA Hiroyuki
327c0e9686 vmscan: fix it to take care of nodemask
try_to_free_pages() is used for the direct reclaim of up to
SWAP_CLUSTER_MAX pages when watermarks are low.  The caller to
alloc_pages_nodemask() can specify a nodemask of nodes that are allowed to
be used but this is not passed to try_to_free_pages().  This can lead to
unnecessary reclaim of pages that are unusable by the caller and int the
worst case lead to allocation failure as progress was not been make where
it is needed.

This patch passes the nodemask used for alloc_pages_nodemask() to
try_to_free_pages().

Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:15 -07:00
David Rientjes
88c3bd707c vmscan: print shrink_slab symbol name on negative shrinker objects
When a shrinker has a negative number of objects to delete, the symbol
name of the shrinker should be printed, not shrink_slab.  This also makes
the error message slightly more informative.

Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:15 -07:00
Johannes Weiner
ad1c3544d0 mm: don't free swap slots on page deactivation
The pagevec_swap_free() at the end of shrink_active_list() was introduced
in 68a22394 "vmscan: free swap space on swap-in/activation" when
shrink_active_list() was still rotating referenced active pages.

In 7e9cd48 "vmscan: fix pagecache reclaim referenced bit check" this was
changed, the rotating removed but the pagevec_swap_free() after the
rotation loop was forgotten, applying now to the pagevec of the
deactivation loop instead.

Now swap space is freed for deactivated pages.  And only for those that
happen to be on the pagevec after the deactivation loop.

Complete 7e9cd48 and remove the rest of the swap freeing.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:13 -07:00
Johannes Weiner
2443462b0a mm: move pagevec stripping to save unlock-relock
In shrink_active_list() after the deactivation loop, we strip buffer heads
from the potentially remaining pages in the pagevec.

Currently, this drops the zone's lru lock for stripping, only to reacquire
it again afterwards to update statistics.

It is not necessary to strip the pages before updating the stats, so move
the whole thing out of the protected region and save the extra locking.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: MinChan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:13 -07:00
Johannes Weiner
bd2f6199cf vmscan: respect higher order in zone_reclaim()
During page allocation, there are two stages of direct reclaim that are
applied to each zone in the preferred list.  The first stage using
zone_reclaim() reclaims unmapped file backed pages and slab pages if over
defined limits as these are cheaper to reclaim.  The caller specifies the
order of the target allocation but the scan control is not being correctly
initialised.

The impact is that the correct number of pages are being reclaimed but
that lumpy reclaim is not being applied.  This increases the chances of a
full direct reclaim via try_to_free_pages() is required.

This patch initialises the order field of the scan control as requested by
the caller.

[mel@csn.ul.ie: rewrote changelog]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 08:59:12 -07:00