Commit Graph

75 Commits

Author SHA1 Message Date
Nobuhiro Iwamatsu
4cec1a37ba sh: Renesas Solutions SH7763RDP board support
This patch adds basic support for the SH7763RDP board.
This supports a basic stuff provided in SH7763, like SCIF,
NOR Flash and USB host.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:30 +09:00
Yusuke Goda
04e917b606 sh: Add support Renesas Solutions AP-325RXA board
This board is SH7723 base board.

This has SCIF, LCDC, USB Host controler, NOR/NAND Flash, Sound,
Ether and other.

This patch supports SCIF, NOR Flash.

Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:29 +09:00
Paul Mundt
3787aa112c sh: RSK+ 7203 board support.
This adds initial support for the RTE RSK+ SH7203 board.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:28 +09:00
Paul Mundt
e50901338b sh: Add -mno-fdpic to default flags.
Presently the --fdpic specifier and the --isa matching clash when
building with FDPIC toolchains. As we have no interest in building the
kernel with --fdpic in the first place, always try to add in -mno-fdpic
to the default flags.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-06-09 16:49:43 +09:00
Adrian Bunk
f5f826c685 sh: remove the broken SH_MPC1211 support
SH_MPC1211 has been marked as BROKEN for some time.

Unless someone is working on reviving it now, I'd therefore suggest this
patch to remove it.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:39 +09:00
Yoshihiro Shimoda
6e862995a0 sh: Add support for Solution Engine SH7721 board
Add support for Solution Engine SH7721 board(MS7721RP01).

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:02 -07:00
Franck Bui-Huu
49a5ba46c5 sh: Use relative paths for mach/cpu symlinks.
When building the kernel without passing the O= command line parameter
there's no point to use absolute paths for them.

Usually relative paths are preferred because they survive directory
moves, work across networked file systems and chrooted environments.

Absolute paths are still used if an output directory is given.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-21 12:22:01 +09:00
Paul Mundt
e7d7deca60 sh: Fix up SH7710 VoIP-GW build.
The only board-specific bits that existed here were for setting up the
IRQs, which are now handled by the SH7710 CPU support code instead. As
there's nothing else to do for setup, kill off the board support code
and have the defconfig use the generic machvec instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-06 16:08:00 +09:00
Magnus Damm
70f784ec1d sh: migor board support
This patch adds basic support for the Migo-R board.

Only simple stuff provided by the cpu specific sh7722 code is in place now,
like serial console port, timers and usb gadget. There is also partial support
for the smc91c111 ethernet controller - unfortunately some driver header file
also needs patching (not included here) to make the driver get IRQ sense
information from the platform data.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:08 +09:00
Nicholas Beck
4862ec0739 sh: Add support for SDK7780 board.
Add support for Renesas Technology Europe SDK7780 board.

Signed-off-by: Nicholas Beck <nbeck@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:04 +09:00
Paul Mundt
1b1e037a89 sh: Kill off -traditional for linker script.
Some of Sam's new work in the kbuild queue depend on ## concatenation
within the linker script, which doesn't work when -traditional is
enabled. -traditional is a legacy remnant anyways, and we no longer
require it for anything, so kill it off completely.

Noted-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:04 +09:00
Paul Mundt
b87bf74724 sh: Drop r7780rp_defconfig, use r7780mp_defconfig as kbuild default.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:03 +09:00
Paul Mundt
a5350a9686 sh: Kill off dead HS771RVoIP board support.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:03 +09:00
Magnus Damm
29ec6778a4 sh: remove voyagergx
This patch removes redundant irq handling code together with unused
consistent alloc code. R2D uart setup code is changed to use
sm501-regs.h and unused header files are removed.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:03 +09:00
Paul Mundt
74d99a5e26 sh: SH-2A FPU support.
Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:57 +09:00
Paul Mundt
03713bd226 sh: Move mach-cayman in with the rest of the boards.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:56 +09:00
Paul Mundt
3e0137f6c7 sh: Kill off the mach-harp and mach-sim machtypes.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:56 +09:00
Paul Mundt
35a74499a4 sh: Fix up default zImage target for sh32.
This was using the absolute path, which was confusing the make target.
Switch it to just 'zImage', as per powerpc.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:56 +09:00
Paul Mundt
d088f32357 sh: Consolidate sh/sh64 Makefiles.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:54 +09:00
Paul Mundt
c2f1755bec sh: Tidy up KBUILD_IMAGE for sh64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:54 +09:00
Paul Mundt
36763b22be sh: Switch SH-5 to use CONFIG_PAGE_OFFSET.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:51 +09:00
Paul Mundt
b4db3aec83 sh: Fix up the _stext references for SH-5.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:49 +09:00
Paul Mundt
4c91d6b105 sh: Fix up the head-y targets for _32 and _64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:45 +09:00
Paul Mundt
c20c20047b sh: Plug SH-5 in to arch/sh/Makefile.
Adds the ISA tuning and a lib64 rule.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:39 +09:00
Manuel Lauss
4d2718d00d sh: fix zImage build with >=binutils-2.18
Starting with binutils somewhere around 2.17.50.14 the vmlinux file
contains a ".note.gnu.build-id" section which doesn't get removed when
the zImage is built; resulting in a 2GB intermediate file and a broken
zImage.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-30 09:54:12 +09:00
Linus Torvalds
821f3eff7c Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (40 commits)
  kbuild: introduce ccflags-y, asflags-y and ldflags-y
  kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP
  kbuild: enable use of AFLAGS and CFLAGS on commandline
  kbuild: enable 'make AFLAGS=...' to add additional options to AS
  kbuild: fix AFLAGS use in h8300 and m68knommu
  kbuild: check for wrong use of CFLAGS
  kbuild: enable 'make CFLAGS=...' to add additional options to CC
  kbuild: fix up CFLAGS usage
  kbuild: make modpost detect unterminated device id lists
  kbuild: call export_report from the Makefile
  kbuild: move Kai Germaschewski to CREDITS
  kconfig/menuconfig: distinguish between selected-by-another options and comments
  kconfig: tristate choices with mixed tristate and boolean values
  include/linux/Kbuild: remove duplicate entries
  kbuild: kill backward compatibility checks
  kbuild: kill EXTRA_ARFLAGS
  kbuild: fix documentation in makefiles.txt
  kbuild: call make once for all targets when O=.. is used
  kbuild: pass -g to assembler under CONFIG_DEBUG_INFO
  kbuild: update _shipped files for kconfig syntax cleanup
  ...

Fix up conflicts in arch/um/sys-{x86_64,i386}/Makefile manually.
2007-10-16 11:23:06 -07:00
Sam Ravnborg
222d394d30 kbuild: enable 'make AFLAGS=...' to add additional options to AS
The variable AFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of AFLAGS with KBUILD_AFLAGS all over
the tree.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-15 21:59:31 +02:00
Sam Ravnborg
a0f97e06a4 kbuild: enable 'make CFLAGS=...' to add additional options to CC
The variable CFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of CFLAGS with KBUILD_CFLAGS all over the
tree and enabling one to use:
make CFLAGS=...
to specify additional gcc commandline options.

One usecase is when trying to find gcc bugs but other
use cases has been requested too.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k

Test was simple to do a defconfig build, apply the patch and check
that nothing got rebuild.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-14 22:21:35 +02:00
Markus Brunner
ded5431ff3 sh: Magic Panel R2 board support.
This adds support for the SH7720 (SH3-DSP) based Magic Panel R2
board.

Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
Signed-off by: Mark Jonas <toertel@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:54 +09:00
Magnus Damm
f8b40d8ce8 sh: replace sh specific CONFIG_VOYAGERGX with CONFIG_MFD_SM501
This patch replaces all instances of CONFIG_VOYAGERGX with
CONFIG_MFD_SM501. While at it we make sure the r2d code compiles
both with and without SM501.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:50 +09:00
Paul Mundt
94807a33dc sh: Initial support for SH-X3 prototype board.
This adds initial support for the SH-X3 prototype board.
Only simple logic for the IRQ controller and the heartbeat driver
for now.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:48 +09:00
Paul Mundt
da2f5f7bf4 sh: Fix DSP opcode regression for SH3-DSP parts.
Older versions of binutils do not support -Wa,-isa= tuning, which is
something we rely on for enabling DSP opcode support on the newer
parts. SH3-DSP parts can still be handled with -Wa,-dsp even if the
newer parts require the newer versions of binutils for supporting the
new opcodes.

This was broken in -rc1 when the SH4AL-DSP support was being reworked,
and is needed to get SH3-DSP working with older toolchains again.

Reported-by: Markus Brunner <super.firetwister@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-21 16:56:56 +09:00
Magnus Damm
d89ddd1c84 sh: remove support for sh7300 and solution engine 7300
This patch removes old dead code:
- kill off sh7300 cpu support
- get rid of broken solution engine 7300 board support

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26 15:37:57 +09:00
Magnus Damm
870e8a2438 sh: remove support for sh73180 and solution engine 73180
This patch removes old dead code:
- kill off sh73180 cpu support
- get rid of broken solution engine 73180 board support

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-25 10:49:21 +09:00
Kristoffer Ericson
4aafae27d0 sh: hd64461 tidying.
Kill off the hd64461 io.c, as all of the hd64461 users are now
using the generic I/O routines.

[ hd64461/ moved to hd64461.c by Paul ]

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 12:18:19 +09:00
Paul Mundt
aab1b16a61 sh: Don't let SH-4A clobber SH-4 CFLAGS.
Older compilers don't support the -m4a{,nofpu} flags, which has the
side-effect of allowing FP operations to be emitted. Switch this to
incremental tuning, so we at least have -m4-nofpu as a fallback for
the gcc3 toolchains.

Without this, certain modules emit references to __udivsi3_i4 and
__sdivsi3_i4.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-12 09:48:54 +09:00
Paul Mundt
5296307de6 sh: Drop -Wa,-dsp for DSP tuning.
We already hand off the proper ISA variant with the dsp specifier
appended, so we don't need to explicitly set -dsp. This causes some
confusion with certain toolchains that are restricted to -dsp family
opcodes artificially.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-07 07:25:56 +09:00
Paul Mundt
880dec1007 sh: Add cpu and mach links to CLEAN_FILES.
These weren't being cleaned up, so add them to the CLEAN_FILES.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-06 10:22:59 +09:00
Paul Mundt
b9601c5e59 sh: Kill off dead SH7604 support.
This was added during 2.5.x, but was never moved along. This
can easily be resurrected if someone has one they wish to work
with, but it's not worth keeping around in its current form.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 11:55:28 +09:00
Paul Mundt
6240d92f2f sh: Wrap CPU tuning through cc-option.
Some compilers don't support the explicit CPU tuning, while binutils
is still able to handle the special subtype-specific opcodes. Make
the CFLAG optional, falling back on the compiler default if nothing
better exists.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:46 +00:00
Paul Mundt
fd8f20e8e2 sh: Rip out special unknown machvec.
This kills off the BareCPU board as a "special" machvec, rather,
we leave this as a default for when no other vector is available,
or when we want to use it in combination with other vectors for
testing with generic ops. As sh_mv is copied out anyways (or
overloaded when an alternate vector is explicitly selected), this
doesn't consume any additional memory.

The generic machvec can be forcibly selected with sh_mv=generic,
or by not having any other boards enabled.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:40 +00:00
Paul Mundt
25f8151bdc sh: Get multiple boards in one image working again.
This tidies up the build rules and permits multiple boards to be
linked in to the same kernel. The earlier Kconfig work ensures that
the CPU configuration is consistent across the boards, as this is
the only thing that we can't do dynamically.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:39 +00:00
Andrew Morton
4e1c208420 sh: support older gcc's
Make my version of gcc happy.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-31 13:48:57 +09:00
Ryusuke Sakato
6865f0ea6a sh: Solution Engine 7722 board support.
This adds more full-featured support for the SH7722 Solution Engine.
Previously this was using the generic board, and lacked most of the
peripheral support.

Signed-off-by: Ryusuke Sakato <sakato.ryusuke@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:57 +00:00
Nobuhiro Iwamatsu
b75762302e sh: SH7780 Solution Engine board support.
This adds support for the SH7780-based Solution Engine reference board.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:11:55 +00:00
Nobuhiro Iwamatsu
c86c5a9104 sh: L-BOX RE2 support.
This adds support for the L-BOX RE2 router.

	http://www.nttcom.co.jp/l-box/

L-BOX RE2 is a SH7751R-based router. It has CF, Cardbus, serial,
and LAN x2. This is one of the very few SH boards that a general
person can obtain now.

The L-BOX shipped with a 2.4.28 kernel, this is a rewritten patch
adding it to current git.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:54 +00:00
Paul Mundt
32351a28a7 sh: Add SH7785 Highlander board support (R7785RP).
This adds preliminary support for the SH7785-based Highlander board.
Some of the Highlander support code is reordered so that most of it
can be reused directly.

This also plugs in missing SH7785 checks in the places that need it,
as this is the first board to support the CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:53 +00:00
Paul Mundt
fa5da2f7bd sh: Bring kgdb back from the dead.
This code has suffered quite a bit of bitrot, do some basic
tidying to get it to a reasonably functional state again.
This gets the basic support and the console working again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:51 +00:00
Paul Mundt
e65fa9f59e sh: Kill off dead bigsur and ec3104 boards.
Neither of these have had any maintenance in years, and there's
no interest in keeping them straggling along. These have already
been slated for removal some time, so finally just get rid of them.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-14 15:06:09 +09:00
Paul Mundt
702dd80375 sh: Use proper SH-2A CFLAGS on newer compilers.
-m2 doesn't end up working particularly well when we've got a constrained
toolchain target. Switch to the same semantics used by SH-4A to attempt
to get it right. Spotted by Alex Song <songqf9@yahoo.ca>.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:43 +09:00