Commit Graph

142 Commits

Author SHA1 Message Date
Daniel Ritz
f9cb8b71e7 [PATCH] yenta: more ENE bridges
Adds better support for the CB-710, CB-712, CB-720 and CB-722 bridges from EnE

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:29 +02:00
Daniel Ritz
6c1a10dba9 [PATCH] yenta: add support for more TI bridges
Support some more TI cardbus bridges.  most of them are multifunction
devices which adds 1394 controllers, smartcard readers etc.  this could
also help with the various problems with the XX21 controllers seen on the
linux-pcmcia list.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:27 +02:00
Komuro
81000808b6 [PATCH] pcmcia: fix Kconfig dependency
TCIC depends on ISA.  It is used with ISA-bus system only.

Signed-off-by: komurojun-mbn@nifty.com
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:26 +02:00
Dominik Brodowski
8e5d17ebe4 [PATCH] yenta: tiny cleanup
pci_set_power_state is not needed, as we call pci_enable_device() somewhere
else.  Also, the resource we write to PCI_BASE_ADDRESS_0 needs to be converted
to bus-centric view first.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:25 +02:00
Daniel Ritz
a413c09094 [PATCH] yenta: don't mess with bridge control register
In interrupt probing (both ISA and PCI) the bridge control register is used
to change interrupt routing to ISA or PCI by changing bit 7.  But this bit
only controls the routing of card functional interrupts, not the CSC
interrupts which are used for interrupt probing.

A bad side effect of messing with this register in yenta_probe_irq() is
that it can lead to irq storms if a card is inserted and already powered by
the BIOS.

Usage in yenta_sock_init() and yenta_config_init() seem to be fishy as well.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:11:24 +02:00
Daniel Ritz
8c3520d4eb [PATCH] yenta: auto-tune EnE bridges for CardBus cards
Echo Audio cardbus products are known to be incompatible with EnE bridges.
in order to maybe solve the problem a EnE specific test bit has to be set,
another cleared...but other setups have a good chance to break when just
forcing the bits.  so do the whole thingy automatically.

The patch adds a hook in cb_alloc() that allows special tuning for the
different chipsets.  for ene just match the Echo products and set/clear the
test bits, defaults to do the same thing as w/o the patch to not break
working setups.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26 13:09:20 +02:00
Linus Torvalds
5a23f34798 Fix yenta error message when unable to find a bus assignment
And mention 'pci=assign-busses' as a possible fix.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-14 13:05:17 -07:00
Ivan Kokshaysky
c7fb0b35ad [PATCH] yenta oops fix
In some cases, especially on modern laptops with a lot of PCI and
cardbus bridges, we're unable to assign correct secondary/subordinate
bus numbers to all cardbus bridges due to BIOS limitations unless
we are using "pci=assign-busses" boot option.
So some cardbus controllers may not have attached subordinate pci_bus
structure, and yenta driver must cope with it - just ignore such cardbus
bridges.

For example, see https://bugzilla.novell.com/show_bug.cgi?id=113778

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-14 12:28:15 -07:00
Dominik Brodowski
c352ec8ab8 [PATCH] pcmcia: warn on IOCTL usage
More visible user information of scheduled feature removal.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:22:27 -07:00
Brice Goglin
bd65a68574 [PATCH] pcmcia: add pcmcia to IRQ information
Add a devname parameter to the pcmcia_device structure, fills it with
"pcmcia<bus_id>" in pcmcia_device_add, and passes it to request_irq in
pcmcia_request_irq.

Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:48 -07:00
David Brownell
f74e48a51c [PATCH] pcmcia: OMAP CF controller
This adds a socket driver for the OMAP CF controller; it's currently in use on
OSK boards.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:48 -07:00
Dominik Brodowski
71ed90d89e [PATCH] pcmcia: remove unused Vpp1, Vpp2 and Vcc
config_t->Vpp1, Vpp2 and Vcc are never read, so remove them.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:48 -07:00
Dominik Brodowski
76d82ec526 [PATCH] pcmcia: remove unused client_t
client_t and CLIENT_MAGIC are unused, so remove them

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:47 -07:00
Daniel Ritz
c8751e4c0b [PATCH] pcmcia/yenta: avoid PCI write posting problem
extend cb_writel(), exca_writeb(), exca_writel() to do a read[lb]() after
the write[lb]() to avoid possible problem with PCI write posting.

Seems to fix Bug #5061.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:47 -07:00
Daniel Ritz
c181e0e00f [PATCH] fix pcmcia_request_irq() for multifunction card
multifunction cards need to have the same irq assigned to both functions.
the code tries that but fails because ret is still set to CS_IN_USE which
results in the function having the CB irq assigned.  yenta_set_socket then
just changes the irq routing to use the PCI interrupt but the first
functions irq handler is registered on an ISA interrupt.  boom.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:47 -07:00
Daniel Ritz
bf4de6f2db [PATCH] pcmcia/cs: fix possible missed wakeup
- thread_done should only be completed when the wait_queue is installed.

- all wake up conditions should be checked before schedule()

this fixes a hang of rmmod in the sequence modprobe yenta_socket; rmmod
yenta_socket as reported by Andreas Steinmetz.  w/o this rmmod yenta_socket
can hang on wait_for_completion() in pcmcia_unregister_socket()

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Dominik Brodowski <linux@brodo.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:47 -07:00
Dominik Brodowski
b3743fa444 [PATCH] yenta: share code with PCI core
Share code between setup-bus.c and yenta_socket.c: use the write-out code of
resources to the bridge also in yenta_socket.c, as it provides useful debug
output.  In addition, it fixes the bug that the CPU-centric resource view
might need to be transferred to the PCI-centric view: setup-bus.c does that,
while yenta-socket.c did not.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:47 -07:00
Ingo Molnar
76fa82fb71 [PATCH] pcmcia: reduce ds.c stack footprint
This patch reduces the stack footprint of pcmcia_device_query() from 416 bytes
to 36 bytes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:46 -07:00
Daniel Ritz
ea2f1590aa [PATCH] yenta: make ToPIC95 bridges work with 16bit cards
ToPIC95 brides (and maybe some other too) require to use the ExCA registers
to power up the socket if a 16bit card is pluged.  allow socket drivers to
set a flag so that yenta does just that.  also clean up yenta_get_status()
a bit to use the new yenta_get_power() function.

Side note: ToPIC97 bridges (at least in Rev.5 i have) don't require this.

Ryan Underwood <nemesis-lists@icequake.net> said:

 According to the mail that David Hinds received from a Toshiba engineer,
 ToPIC95 and 97 do require this, and ToPIC100 does not.  Maybe you have a
 later revision.

 For all chips, 16-bit cards can be enabled through ExCA.  So doesn't it
 make sense just to make this the default behavior for all Toshiba chips,
 to avoid corner cases showing up later?

Daniel responded:

 I disagree with ryan to change anything for topic97 bridges.  they work.
 and I couldn't find (read google) any report of a topic97 breaking on
 applying power with the CB registers.

 I'm having several toshba notebooks at work (and home) with topic95,97,100
 bridges.  Only the ones with a topic95 didn't work.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:21 -07:00
Richard Purdie
0ce7625f3c [ARM] 2882/1: pxa2xx_sharpsl: Update PCMCIA driver to support variety of new hardware
Patch from Richard Purdie

This patch updates the PCMCIA pxa2xx_sharpsl driver to support multiple scoop
devices by adding a scoop to pcmcia slot mapping structure. It adds platform
support for poodle, is known to work on spitz (which is dual slot) and
should also support collie with a minor amount of further work.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-05 20:49:54 +01:00
Richard Purdie
f36598aeca [ARM] 2873/1: PCMCIA soc: Allow access to filesystems on CF at boot time
Patch from Richard Purdie

This change makes the soc pcmcia interfaces available earlier in the
boot process meaning devices like CF microdrives can be used for the
root filesystem.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-03 19:39:25 +01:00
Al Viro
531e5ca62b [PATCH] missing include in pcmcia_resource.c
missing include of asm/irq.h

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23 18:43:43 -07:00
Dominik Brodowski
43c3473552 [PATCH] pci and yenta: pcibios_bus_to_resource
In yenta_socket, we default to using the resource setting of the CardBus
bridge.  However, this is a PCI-bus-centric view of resources and thus needs
to be converted to generic resources first.  Therefore, add a call to
pcibios_bus_to_resource() call in between.  This function is a mere wrapper on
x86 and friends, however on some others it already exists, is added in this
patch (alpha, arm, ppc, ppc64) or still needs to be provided (parisc -- where
is its pcibios_resource_to_bus() ?).

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-04 21:32:46 -07:00
Paul Mackerras
f7d1d23c30 [PATCH] Obvious bugfix for yenta resource allocation
Recent changes (well, dating from 12 July) have broken cardbus on my
powerbook: I get 3 messages saying "no resource of type xxx available,
trying to continue", and if I plug in my wireless card, it complains
that there are no resources allocated to the card.  This all worked in
2.6.12.

Looking at the code in yenta_socket.c, function yenta_allocate_res,
it's obvious what is wrong: if we get to line 639 (i.e. there wasn't a
usable preassigned resource), we will always flow through to line 668,
which is the printk that I was seeing, even if a resource was
successfully allocated.  It looks to me as though there should be a
return statement after the two config_writel's in each of the 3
branches of the if statements, so that the function returns after
successfully setting up the resource.

The patch below adds these return statements, and with this patch,
cardbus works on my powerbook once again.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-02 08:28:48 -07:00
Dominik Brodowski
5d546f5432 [PATCH] pcmcia: fix multiple insertion of multifunction cards
The ordering of setting and clearing device_add_pending went wrong on some
occasions, causing multifunction cards only to be handled correctly on the
first insertion, not on subsequent ones.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 10:03:56 -07:00
Linus Torvalds
889371f61f Revert "yenta free_irq on suspend"
ACPI is wrong.  Devices should not release their IRQ's on suspend and
re-aquire them on resume.  ACPI should just re-init the IRQ controller
instead of breaking most drivers very subtly.

Breakage reported by Hugh Dickins <hugh@veritas.com>

Undo: d8c4b4195c

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-30 13:41:56 -07:00
Daniel Ritz
eaaf9c68e7 [PATCH] pcmcia: disable read prefetch/write burst on old O2Micro bridges
Older O2Micro bridges have problems with both read prefetch and write burst
depending on the combination of the chipset, bridge, cardbus card.  safest is
to disable read prefetch and write burst on those old bridges.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 08:39:01 -07:00
Daniel Ritz
d8c4b4195c [PATCH] yenta: free_irq() on suspend.
Resume doesn't seem to work without.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 08:39:01 -07:00
Dominik Brodowski
a1b274fbe3 [PATCH] pcmcia: fix sharing IRQs and request_irq without IRQ_HANDLE_PRESENT
Debugging and description from: Noah Misch <noah@cs.caltech.edu>

When a driver calls pcmcia_request_irq with IRQ_HANDLE_PRESENT unset, it looks
for an open IRQ by request_irq()ing with a dummy handler and NULL dev_info.
free_irq uses dev_info as a key for identifying the handler to free among
those sharing an IRQ, so request_irq returns -EINVAL if dev_info is NULL and
the IRQ may be shared.  That unknown error code is the -EINVAL.

It looks like only pcnet_cs and axnet_cs are affected.  Most other drivers let
pcmcia_request_irq install their interrupt handlers.  sym53c500_cs requests
its IRQ manually, but it cannot share an IRQ.

The appended patch changes pcmcia_request_irq to pass an arbitrary, unique,
non-NULL dev_info with the dummy handler.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 08:39:01 -07:00
Dominik Brodowski
2e5a3e7909 [PATCH] pcmcia: avoid duble iounmap of one address
Avoid double iounmap of one address, and disable cis_virt if set_mem_map
failed.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 08:39:00 -07:00
Dominik Brodowski
dc33a4a36c [PATCH] pcmcia: update au1000 to work with recent changes
Get the au1000 PCMCIA socket drivers to work.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 08:39:00 -07:00
Pavel Roskin
ba5bb6b584 [PATCH] pcmcia: fix comment
There are two problems with the message about missing callback functions: it's
not written in correct English and it lacks newline at the end.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 08:38:59 -07:00
Michael Gernoth
821ca47886 [PATCH] ARM: 2830/1: Fix Jornada 720 PCMCIA-support
Patch from Michael Gernoth

This patch lets the Jornada 720 PCMCIA-driver compile again. The
resulting driver has been tested on a Jornada with a CF-card, which
was mounted and accessed successfully.

Signed-off-by: Michael Gernoth <michael@gernoth.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-26 19:21:47 +01:00
Linus Torvalds
3f603ed319 Merge master.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-2.6 2005-07-12 16:04:50 -07:00
Dominik Brodowski
eb0a90b497 [PATCH] yenta: allocate resource fixes
The current CardBus window allocation code in yenta_socket is unable to handle
the transparent PCI-bridge handling update in 2.6.13.  We need to check _all_
resources of a given type to find the best one suitable for CardBus windows,
not just the first one.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12 16:01:00 -07:00
Dominik Brodowski
278798357d [PATCH] yenta: same resources in same structs
drivers/pci/setup-bus.c enumerates the CardBus windows (bus->resources[])

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12 16:01:00 -07:00
Dominik Brodowski
862104e563 [PATCH] yenta: fix parent resource determination
If the CardBus windows were pre-configured and the CardBus bridge is behind a
transparent PCI-PCI bridge, pci_find_parent_resource() might return a
different resource than the real parent if it is called before the window is
determined.  Therefore, move that call around.

Also fix return of value in void function.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12 16:00:59 -07:00
Len Brown
5028770a42 [ACPI] merge acpi-2.6.12 branch into latest Linux 2.6.13-rc...
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-12 17:21:56 -04:00
David Shaohua Li
d58da59045 [ACPI] S3 Suspend to RAM: fix driver suspend/resume methods
Drivers should do this:

.suspend()
	pci_disable_device()

.resume()
	pci_enable_device()

http://bugzilla.kernel.org/show_bug.cgi?id=3469

Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-11 23:23:46 -04:00
Dominik Brodowski
89b39f5d8d [PATCH] yenta: don't depend on CardBus
As a follow-up, we can allow the yenta-driver to be limited to PCMCIA
operation.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:24:07 -07:00
Russell King
5bc6b68a10 [PATCH] yenta: no CardBus if IRQ fails
If probing for the correct interrupt fails on yenta bridges, the driver falls
back to polling for interrupt actions.  However, CardBus cards cannot be used
then.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:24:07 -07:00
Dominik Brodowski
44670d2b50 [PATCH] pcmcia: remove references to pcmcia/version.h
As a follow-up, remove the inclusion of pcmcia/version.h in many files.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:24:07 -07:00
Pavel Roskin
a00db1ba7c [PATCH] pcmcia: remove client services version
The Linux PCMCIA code has some data that was apparently used (or meant to be
used) to ensure that only proper client drivers are loaded.  This is now
ensured (to a certain degree) by the fact that the most client drivers are
part of the kernel.  Also, the version information has not been updated
despite major changes in PCMCIA API.  This has made it meaningless.

This patch removes servinfo_t and pcmcia_get_card_services_info.  They are not
used in any userspace utilities such as pcmcia-cs and pcmciautils.
drivers/pcmcia/pcmcia_ioctl.c is adjusted accordingly.

CS_RELEASE and CS_RELEASE_CODE are removed.  include/pcmcia/version.h is empty
now.  It will be removed later, but for now it's left in the tree to avoid
touching all PCMCIA clients.

The only driver that needs to be changed is drivers/scsi/pcmcia/nsp_cs.c,
which uses CS_RELEASE_CODE.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:24:06 -07:00
Dominik Brodowski
2bc5a9bdc5 [PATCH] pcmcia: reduce client_handle_t usage
Reduce the occurences of "client_handle_t" which is nothing else than a
pointer to struct pcmcia_device by now.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:24:06 -07:00
Dominik Brodowski
e12a9a93a8 [PATCH] pcmcia: remove client_t usage
Reduce the occurences of "client_handle_t" which is nothing else than a
pointer to struct pcmcia_device by now.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:24:06 -07:00
Dominik Brodowski
1e212f3645 [PATCH] pcmcia: move event handler
Move the "event handler" to struct pcmcia_driver -- the unified event handler
will disappear really soon, but switching it to struct pcmcia_driver in the
meantime allows for better "step-by-step" patches.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:24:05 -07:00
Dominik Brodowski
bf45d9b0ac [PATCH] pcmcia: deprecate ioctl
Schedule removal of the PCMCIA ioctl (and thus kernel support for the
pcmcia-cs userspace package) for November 2005.

A big "thank you" to Dave Hinds for his great work on supporting PCMCIA in
Linux.  Things are just done differently by now, so the ongoing work to make
PCMCIA behave like any other hotpluggable bus should continue.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:24:04 -07:00
Ian Campbell
69a4d56bae [PATCH] pcmcia: fix i82365 request_region double usage
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=f354942cb301fed273f423fb5c4f57bde3efc5b2
converted the check_region() calls in drivers/pcmcia/i82365.c into
request_regions.  Unfortunately this seems to have broken things.

isa_probe() used to call check_region() and then call add_pcic() which would
request_region().

Now isa_probe() calls request_region() and then calls add_pcic() which calls
request_region() again, this fails and add_pcic() returns immediately without
doing all the setup etc.

On the face of it the patch below fixes the problem, by not doing the second
request region in add_pcic().  I think this is preferable to remove the call
in isa_probe() since identify() touches the I/O regions and is called before
add_pcic().

However I haven't fully grokked the meaning of the code which follows the
request_region() in isa_probe(), so I'm not sure that the handling WRT
multiple sockets and multiple bridge chips is correct.  In particular I'm not
convinced that the regions for subsequent sockets and/or bridges will be
requested at all.  I suspect a more thorough reworking by someone who
understands what is going on there might be in order.

I should mention that I'm actually messing about with this on an ARM platform
with wacky memory and i/o mapping offsets etc, it doesn't quite work yet for
other reasons which preclude full testing etc, but I think the problem above
is still present for more normal x86 stuff.

Signed-off-by: Ian Campbell <icampbell@arcom.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07 18:24:04 -07:00
Dominik Brodowski
3704511b2e [PATCH] pcmcia: fix modalias attribute in sysfs
Fix up PCMCIA modalias file in sysfs

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-30 08:45:08 -07:00
Dominik Brodowski
b6d00f0de9 [PATCH] ACPI-based PCI resources: PCMCIA bugfix, but resources missing in trees
Don't auto-configure yenta sockets for PCMCIA devices if it is connected to
the root PCI bus on the x86 or x86_64 architectures.  Previously, this was
handled by the "ioport_resource"/"iomem_resource" check a few lines below,
but with the new ACPI-based resource handling this doesn't catch all cases
any longer.

pci-yenta-cardbus-fix.patch and this patch should solve the initialization
time trouble.  However, the ACPI-based PCI resource handling is badly
broken, IMHO:

- many resources of devices don't show up in the resource trees (
  /proc/iomem and /proc/ioports) any longer. This means that PCMCIA, but
  also possibly other subsystems (ISA, PnP, ...) do not know which resources
  it cannot use.

- verify_root_windows() should fail if there are no iomem _or_ ioport
  resources, not only if there are no iomem _and_ ioport resources.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:22 -07:00
Dominik Brodowski
3248ff43f8 [PATCH] pcmcia: export modalias in sysfs
Provide a "modalias" entry in sysfs for PCMCIA devices.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:22 -07:00
Dominik Brodowski
57b6281cea [PATCH] pcmcia: 8 and 16 bit access for static_map
The PCMCIA card services layer is never setting the i/o map attributes when
SS_CAP_STATIC_MAP is specified.  Net result, sockets' set_io_map() calls
always see requests with most flags clear, meaning 8 bit access.

For hardware that always autosizes, that won't matter; and all current
STATIC_MAP drivers ignore those attributes.  A new driver (for at91rm9200)
suffers badly from this, since this forces everything into 8 bit mode and
that breaks both (a) cards requiring 16 bit access, and (b) ide-cs; but of
course 8-bit cards work OK (as does accessing card attributes).

So this patch arranges to pass the attributes down, matching the behavior
for non-static mappings (using the first/only I/O window).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:22 -07:00
Dominik Brodowski
1a8ceafce5 [PATCH] pcmcia: properly handle all errors of register_chrdev
register_chrdev() can return errors (negative) other then -EBUSY, so check
for any negative error code.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:22 -07:00
Dominik Brodowski
2ad0a0a793 [PATCH] pcmcia: resource handling fixes
- properly bail out in set_cis_map if call to socket driver's set_mem_map
  failed
- don't abort do_mem_probe cycle if one entry failed (!CONFIG_PCMCIA_PROBE)
- don't do iomem probing in chunks larger than 0x800000 (1 << 23) as
  yenta_socket and vrc4173_cardu.c fail to set_mem_map for windows equal to
  or larger than (1 << 24).

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:21 -07:00
Dominik Brodowski
f861bd2307 [PATCH] pcmcia: select crc32 in Kconfig for PCMCIA
PCMCIA needs CRC32.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:21 -07:00
Dominik Brodowski
f354942cb3 [PATCH] pcmcia: use request_region in i82365
randy_dunlap <rdunlap@xenotime.net>

Convert deprecated check_region() calls to request/release region.
Add return value check on one request_region().

I suspect that it may do an extra release_region(), which should
generate a warning message from the kernel.

Signed-off-by: randy_dunlap <rdunlap@xenotime.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:21 -07:00
Dominik Brodowski
378a33a686 [PATCH] pcmcia: release_class
Properly wait for the class refcount to reach zero.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:20 -07:00
Dominik Brodowski
3448139b41 [PATCH] pcmcia: ds.c cleanup
Clean up ds.c

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:20 -07:00
Dominik Brodowski
33519ddd43 [PATCH] pcmcia: cs.c cleanup
Clean up cs.c

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:20 -07:00
Dominik Brodowski
1a8d46631e [PATCH] pcmcia: move pcmcia resource handling out of cs.c
Move the 16-bit PCMICA resource handling from pcmcia_core.o to pcmcia.o.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:20 -07:00
Dominik Brodowski
e6ea0b9ec5 [PATCH] pcmcia: rename some functions
Rename some functions in drivers/pcmcia/ to show they belong to the PCMCIA
subsystem.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:19 -07:00
Dominik Brodowski
3b659fb862 [PATCH] pcmcia: remove unneeded includes in ds.c
Remove unnecessary includes in ds.c and pcmcia_ioctl.c

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:19 -07:00
Dominik Brodowski
dc109497bd [PATCH] pcmcia: merge struct pcmcia_bus_socket into struct pcmcia_socket
Merge struct pcmcia_bus_socket into struct pcmcia_socket.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:19 -07:00
Dominik Brodowski
b5e43913cf [PATCH] pcmcia: make PCMCIA status a bitfield
make pcmcia_bus_socket->state a bitfield, and rename it pcmcia_state to
prepare for struct pcmcia_bus_socket integration into struct pcmcia_socket.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:19 -07:00
Dominik Brodowski
90c6cdd1fa [PATCH] pcmcia: clean up cs ds callback
struct pcmcia_callback isn't needed for each socket, one is enough for all
sockets.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:19 -07:00
Dominik Brodowski
e7a480d229 [PATCH] pcmcia: move PCMCIA ioctl to a separate file
Move all PCMCIA_IOCTL-related code to a different file.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

From: Richard Purdie <rpurdie@rpsys.net>

The pcmcia-move-pcmcia-ioctl-to-a-separate-file patch was corrupted in -mm2
causing this problem.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:18 -07:00
Dominik Brodowski
9a5555b81f [PATCH] pcmcia: add a config option for the PCMICA ioctl
Add a new config option to control the building of the PCMCIA IOCTL. Currently,
it is not yet made public, though the help text is there already.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowksi.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:18 -07:00
Dominik Brodowski
3c29976a64 [PATCH] pcmcia: mark parent bridge windows as resources available for PCMCIA devices
Automatically mark the parent PCI-PCI bridge windows as resources available
for PCMCIA usage.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:18 -07:00
Dominik Brodowski
22916638b1 [PATCH] pcmcia: update resource database adjust routines to use unsigned long values
Make adjust_io and adjust_memory independent of adjust_t to allow for IO
resources > x86's IO_SPACE_LIMIT.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:18 -07:00
Dominik Brodowski
5085cb2650 [PATCH] pcmcia: add some Documentation
Add some information useful for PCMCIA device driver authors to
Documentation/pcmcia/, and reference it in dmesg in case of hash mismatches.

Also add a reference to pcmciautils to Documentation/Changes.  With recent
changes, you don't need to concern yourself with pcmcia-cs even if you have
PCMCIA hardware, so the example above the list needed to be adapted as well.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowksi.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:18 -07:00
Dominik Brodowski
e2f0b53441 [PATCH] pcmcia: rescan bus always upon echoing into setup_done
Always rescan the devices upon echo'ing something to
available_resources_setup_done.  This is needed for proper "coldplug" support.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:08 -07:00
Dominik Brodowski
e94e15f705 [PATCH] pcmcia: cleanups
From: Adrian Bunk <bunk@stusta.de>

This patch contains the following cleanups:
- make needlessly global code static
- remove the following unneeded EXPORT_SYMBOL's:
  - ds.c: pcmcia_report_error
  - ds.c: pcmcia_bus_type

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:08 -07:00
Dominik Brodowski
daa9517d9e [PATCH] pcmcia: request CIS via firmware interface
Use the firmware method to load replacement CIS tables.  It is recommended
that the /lib/firmware/cis/ points to /etc/pcmcia/cis or the other way round
so that both old-style cardmgr and new-style hotplug/firmware can access these
"overwrite" files

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:08 -07:00
Dominik Brodowski
a5b5577898 [PATCH] pcmcia: allow function-ID based match
The "func_id"-based matching is very fuzzy and can lead to false positives.
Therefore, it should be tried to avoid relying on these matches.  Until
most/all existing func_id-based matches are replaced by
manf_id/card_id/prod_id matches (a patch which will ask to send the
appropriate card information to the PCMCIA mailing list will be added once
other, more pressing issues are adressed), we need to emulate cardmgr
behaviour by allowing func_id matches if no manf_id/card_id/prod_id match
occurs.  This can only be done in userspace because of modules possibly loaded
with long delays.  So, add a per-device sysfs file for this purpose.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:07 -07:00
Dominik Brodowski
f602ff7eb4 [PATCH] pcmcia: match "anonymous" cards
If a card doesn't provide _any_ information about itself, assume it is a
so-called "anonymous" card.  pcmciamtd will bind to it if it is configured to
do so.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:07 -07:00
Dominik Brodowski
ff1fa9ef3c [PATCH] pcmcia: CIS overrid via sysfs
The one thing which surprises me in this patch that cis->Length needs to be
set to count+1.  Without it, it doesn't work, but with it, it doesn't make
sense to me.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:07 -07:00
Dominik Brodowski
7f299bccb4 [PATCH] pcmcia: export CIS in sysfs
Export the CIS to userspace using a sysfs binary file in
/sys/class/pcmcia_socket/pcmcia_scoket%n/

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:07 -07:00
Dominik Brodowski
ea7b38825b [PATCH] pcmcia: match for fake CIS
Add another match flag for devices needing a CIS override.  The driver will
only probe/attach if the CIS has been replaced before.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:06 -07:00
Dominik Brodowski
23a83bfe6a [PATCH] pcmcia: check for invalid crc32 hashes in id_tables
Check for invalid crc32 hashes in drivers' id_tables if CONFIG_PCMCIA_DEBUG is
set.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:06 -07:00
Dominik Brodowski
1ad275e3e7 [PATCH] pcmcia: device and driver matching
The actual matching of pcmcia drivers and pcmcia devices.  The original
version of this was written by David Woodhouse.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:06 -07:00
Dominik Brodowski
3ee1393752 [PATCH] pcmcia: hotplug event for PCMCIA socket devices
Generate hotplug event for PCMCIA sockets being registered.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:06 -07:00
Dominik Brodowski
840c2ac5d3 [PATCH] pcmcia: hotplug event for PCMCIA devices
Export information to /sbin/hotplug for PCMCIA devices: card_id, manf_id,
func_id, bus_id (like pcmcia1.0) and crc32-hashes of the prod_id strings.

Why not the prod_id strings themselves?

a) They may contain all sorts of strange and difficult to handle characters,
   like " ".

b) It's impossible to pass multiple strings to userspace.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:05 -07:00
Ivan Kokshaysky
7925407aa0 [PATCH] pci: yenta cardbus fix
On Mon, Jun 20, 2005 at 07:15:34PM +1000, Grant Coady wrote:
> Yenta: CardBus bridge found at 0000:00:0b.0 [1179:0001]
> yenta 0000:00:0b.0: Preassigned resource 0 busy, reconfiguring...

In -mm1 the cardbus resources might be assigned in
pci_assign_unassigned_resources() pass. From your dmesg:
PCI: Bus 2, cardbus bridge: 0000:00:0b.0
  IO window: 00002000-00002fff
  IO window: 00003000-00003fff
  PREFETCH window: 12000000-13ffffff
  MEM window: 14000000-15ffffff

Then yenta_allocate_res() tries to assign these resources again and,
naturally, fails.

This adds check for already assigned cardbus resources.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 18:03:05 -07:00
Christoph Lameter
3e1d1d28d9 [PATCH] Cleanup patch for process freezing
1. Establish a simple API for process freezing defined in linux/include/sched.h:

   frozen(process)		Check for frozen process
   freezing(process)		Check if a process is being frozen
   freeze(process)		Tell a process to freeze (go to refrigerator)
   thaw_process(process)	Restart process
   frozen_process(process)	Process is frozen now

2. Remove all references to PF_FREEZE and PF_FROZEN from all
   kernel sources except sched.h

3. Fix numerous locations where try_to_freeze is manually done by a driver

4. Remove the argument that is no longer necessary from two function calls.

5. Some whitespace cleanup

6. Clear potential race in refrigerator (provides an open window of PF_FREEZE
   cleared before setting PF_FROZEN, recalc_sigpending does not check
   PF_FROZEN).

This patch does not address the problem of freeze_processes() violating the rule
that a task may only modify its own flags by setting PF_FREEZE. This is not clean
in an SMP environment. freeze(process) is therefore not SMP safe!

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 17:10:13 -07:00
Daniel Ritz
fa912bcb06 [PATCH] yenta TI: turn off interrupts during card power-on #2
- make boot-up card recognition more reliable (ie.  redo interrogation
  always if there is no valid 'card inserted' state) (and yes, i saw it
  happening on an o2micro controller that both CB_CBARD and CB_16BITCARD
  bits were set at the same time)

- also redo interrogation before probing the ISA interrupts.  it's safer
  to do the probing with the socket in a clean state.

- make card insert detect more reliable.  yenta_get_status() now returns
  SS_PENDING as long as the card is not completley inserted and one of the
  voltage bits is set.  also !CB_CBARD doesn't mean CB_16BITCARD.  there is
  CB_NOTACARD as well, so make an explicit check for CB_16BITCARD.

- for TI bridges: disable IRQs during power-on.  in all-serial and tied
  interrupt mode the interrupts are always disabled for single-slot
  controllers.  for two-slot contollers the disabling is only done when the
  other slot is empty.  to force disabling there is a new module parameter
  now: pwr_irqs_off=Y (which is a regression for working setups.  that's
  why it's an option, only use when required)

- modparm to disable ISA interrupt probing (isa_probe, defaults to on)

- remove unneeded code/cleanups (ie.  merge yenta_events() into
  yenta_interrupts())

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:31 -07:00
Hirokazu Takata
934bb7f88e [PATCH] m32r: Update m32r_cfc.[ch] to support Mappi-III platform
This patch is for the M32R CF/PCMCIA drivers to support a new platform,
Mappi-III evaluation board.

Signed-off-by: Mamoru Sakugawa <sakugawa@linux-m32r.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:30 -07:00
Yani Ioannou
e404e274f6 [PATCH] Driver Core: drivers/i2c/chips/w83781d.c - drivers/s390/block/dcssblk.c: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:34 -07:00
Randy Dunlap
afbf510d47 [PATCH] pcmcia/ds: handle any error code
register_chrdev() can return errors (negative) other then -EBUSY, so check
for any negative error code.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 07:59:21 -07:00
Daniel Ritz
c835a38896 [PATCH] pcmcia: yenta TI: align irq of func1 to func0 if INTRTIE is set
Make sure that if the INTRTIE bit is set both functions of the cardbus
bridge use the same IRQ before doing any probing...

[ yes i hate the TI bridges for the fact that they are very flexible
  so that so many BIOS vendors get it wrong. ]

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:43 -07:00
Dominik Brodowski
c35e66a421 [PATCH] pcmcia: enable 32-bit memory windows on pd6729
Enable 32-bit memory windows on pd6729 PCI-PCMCIA bridges.

Signed-off-by: Jarkko Raja <jar@pcuf.fi>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:43 -07:00
Pavel Machek
8bf28030f3 [PATCH] fix u32 vs. pm_message_t in pcmcia
This fixes u32 vs. pm_message_t in pcmcia.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:26 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00