Commit Graph

98 Commits

Author SHA1 Message Date
Paul Mundt
6f5cd2bd59 sh: mach-rsk: Use uImage generation by default for rsk7201/7203.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:49 +09:00
Paul Mundt
180ae2037f sh: Provide sdivsi3/udivsi3/udivdi3 for sh64, kill off libgcc linking.
This moves in the necessary libgcc bits and kills off the libgcc linking
for sh64 kernels as well.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:05 +09:00
Paul Mundt
ea0aac1e13 sh: Consolidate rsk7203/7201 in to a new mach-rsk.
RSK+ platforms have quite a few characteristics in common, so roll them
together in to a shiny new RSK mach-type.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:02 +09:00
Paul Mundt
5dd614761f sh: Re-add support for best fit ISA tuning if none is available.
This was removed in the libgcc integration, but there are still some
compilers that need this. We also relax the rules on the ISA tuning in
the cases where there are no matches for the CPU tuning and adopt the
-any default, which matches the intent of the isa-y target list. This
compensates for mismatches where binutils supports a wide array of
targets whilst the compiler is much more restricted.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:49 +09:00
Paul Mundt
8bcc5c1c33 sh: Add -m4al tuning for SH4AL-DSP.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:54 +09:00
Paul Mundt
709420dd4e sh: Specify sane default image targets for the SH-2 platforms.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:53 +09:00
Paul Mundt
1aad54a99b sh: Migrate necessary libgcc bits in to arch/sh/lib for SUPERH32.
This moves in the necessary libgcc bits for SUPERH32 and drops the
libgcc linking for the regular targets. This in turn allows us to rip
out quite a few hacks both in sh_ksyms_32 and arch/sh/Makefile.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:53 +09:00
Paul Mundt
ddb72b0241 sh: SHmedia ISA tuning fixups.
SH-5 doesn't support any elaborate ISA inheritance schemes (-dsp, -up,
etc.), so only bother with that if we are building an sh32 kernel.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-31 15:58:53 +09:00
Paul Mundt
b2d86a3fd9 sh: Simplify and lock down the ISA tuning.
The ISA tuning as it is today can not cope with all of the different
variations that are possible, so all we can do is a best attempt based on
the CPU family. The DSP and FPU generation are already at odds with each
other, and the nommu tuning we weren't handling at all.  Additionally,
for platforms that never had an FPU, the -nofpu variant never existed,
meaning that we would lose out on family granular tuning completely in
certain cases.

With tat out of the way, we were also using -up versions, allowing for
later instructions that branched off of a particular subset of the ISA,
but are not actually reflected on the hardware being targetted. This
leads to some confusion, and the possibility of bogus instructions on
older parts. Kill that off and lock it down to the family being built
for specifically.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-28 19:37:05 +09:00
Paul Mundt
1a30603233 sh: sh7785lcr: Select uImage as default image target.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-28 18:50:00 +09:00
Paul Mundt
8a2fd5f3ab sh: Fix FPU tuning on toolchains with mismatched multilib targets.
Presently there is very little standing in the way of using an SH-4
toolchain for building an SH-2 kernel, and vice versa. Binutils itself
has no limitations whatsoever and supports explicit ISA hinting, which
we already use with varying degrees of success today.

This leaves GCC as the odd one out, due to a rather dubious policy
decision by the GCC folks to not include all of the CPU family variants
in the default list of multilib targets in GCC4. Despite best efforts to
the contrary, libgcc itself already contains awareness of the various CPU
types and remains generally usable, allowing it to safely be referenced
even on a mismatched target (and indeed, explicit ISA tuning by binutils
keeps us honest in terms of ensuring that we do not link incompatible
objects in).

In order to support this, a couple of changes had to be made. Firstly,
the introduction of MAYBE_DECLARE_EXPORT(), which provides a __weak
extern reference for libgcc resident routines when finer-grained
-m<cpu-family> based tuning is not supported by the toolchain. This
fixes up the __sdivsi3_i4i and __udivsi3_i4i references when dealing
with SH-2 kernels linked with an SH-4 libgcc. Secondly, in case where we
are unable to find a suitable match for CPU family tuning but still
have a toolchain that defaults to FP instruction generation, a suitable
nofpu target must be selected. This is accomplished by selecting the
first nofpu multilib target supported by the toolchain, which is
also necessary for selecting the proper libgcc to link against.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-28 17:19:35 +09:00
Paul Mundt
7639a4541f sh: Migrate common board headers to mach-common/.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 13:02:48 +09:00
Paul Mundt
0955874846 sh: Provide a fixed UTS_MACHINE definition for sh64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-12 18:58:28 +09:00
Adrian Bunk
49de935c10 sh: fix LIBGCC
Commit f15cbe6f1a
(sh: migrate to arch/sh/include/) moved KBUILD_CFLAGS
(which is used by LIBGCC) below LIBGCC, causing build
errors like the following:

<--  snip  -->

...
  LD      .tmp_vmlinux1
arch/sh/kernel/built-in.o: In function `module_clk_recalc':
clock-sh4.c:(.text+0x80f0): undefined reference to `__udivsi3_i4i'
...
make[1]: *** [.tmp_vmlinux1] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02 07:23:31 +09:00
Paul Mundt
4385e12b29 sh: Revert the location change of auto-generated asm/machtypes.h
This ended up causing build breakage on O= builds, as reported by Adrian:

<--  snip  -->

...
  CC      init/main.o
In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/irq.h:4,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/irq.h:23,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/hardirq.h:5,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/hardirq.h:7,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/asm-generic/local.h:5,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/local.h:4,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/module.h:19,
                 from /home/bunk/linux/kernel-2.6/git/linux-2.6/init/main.c:13:
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/machvec.h:15:27:
error: asm/machtypes.h: No such file or directory
make[2]: *** [init/main.o] Error 1

<--  snip  -->

So we simply move machtypes.h back to its original place. asm-offsets.h is
still generated there regardless, until such a time that we find a better place
to stash auto-generated files.

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02 07:14:09 +09:00
Paul Mundt
9b4d10ff24 sh: Kill off stray mach-rsk7203 reference.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-30 01:01:08 +09:00
Paul Mundt
c8b5d9dcbc sh: Move out individual boards without mach groups.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-30 00:13:39 +09:00
Paul Mundt
93dc544cf4 sh: Provide common CPU headers, prune the SH-2 and SH-2A directories.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29 22:46:55 +09:00
Paul Mundt
939a24a6df sh: Move out the solution engine headers to arch/sh/include/mach-se/
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29 21:41:37 +09:00
Paul Mundt
da2014a2b0 sh: Shuffle the board directories in to mach groups.
This flattens out the board directories in to individual mach groups,
we will use this for getting rid of unneeded directories, simplifying
the build system, and becoming more coherent with the refactored
arch/sh/include topology.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29 21:01:19 +09:00
Paul Mundt
cfb81f361a sh: Switch KBUILD_DEFCONFIG to shx3_defconfig.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29 20:19:43 +09:00
Paul Mundt
f15cbe6f1a sh: migrate to arch/sh/include/
This follows the sparc changes a439fe51a1.

Most of the moving about was done with Sam's directions at:

http://marc.info/?l=linux-sh&m=121724823706062&w=2

with subsequent hacking and fixups entirely my fault.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29 08:09:44 +09:00
Yoshihiro Shimoda
cbe9da029d sh: Renesas R0P7785LC0011RL board support
This adds initial support for the Renesas R0P7785LC0011RL board.
This patch supports 29bit address mode only.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:35 +09:00
Nobuhiro Iwamatsu
4cec1a37ba sh: Renesas Solutions SH7763RDP board support
This patch adds basic support for the SH7763RDP board.
This supports a basic stuff provided in SH7763, like SCIF,
NOR Flash and USB host.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:30 +09:00
Yusuke Goda
04e917b606 sh: Add support Renesas Solutions AP-325RXA board
This board is SH7723 base board.

This has SCIF, LCDC, USB Host controler, NOR/NAND Flash, Sound,
Ether and other.

This patch supports SCIF, NOR Flash.

Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:29 +09:00
Paul Mundt
3787aa112c sh: RSK+ 7203 board support.
This adds initial support for the RTE RSK+ SH7203 board.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28 18:10:28 +09:00
Paul Mundt
e50901338b sh: Add -mno-fdpic to default flags.
Presently the --fdpic specifier and the --isa matching clash when
building with FDPIC toolchains. As we have no interest in building the
kernel with --fdpic in the first place, always try to add in -mno-fdpic
to the default flags.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-06-09 16:49:43 +09:00
Adrian Bunk
f5f826c685 sh: remove the broken SH_MPC1211 support
SH_MPC1211 has been marked as BROKEN for some time.

Unless someone is working on reviving it now, I'd therefore suggest this
patch to remove it.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:39 +09:00
Yoshihiro Shimoda
6e862995a0 sh: Add support for Solution Engine SH7721 board
Add support for Solution Engine SH7721 board(MS7721RP01).

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:02 -07:00
Franck Bui-Huu
49a5ba46c5 sh: Use relative paths for mach/cpu symlinks.
When building the kernel without passing the O= command line parameter
there's no point to use absolute paths for them.

Usually relative paths are preferred because they survive directory
moves, work across networked file systems and chrooted environments.

Absolute paths are still used if an output directory is given.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-21 12:22:01 +09:00
Paul Mundt
e7d7deca60 sh: Fix up SH7710 VoIP-GW build.
The only board-specific bits that existed here were for setting up the
IRQs, which are now handled by the SH7710 CPU support code instead. As
there's nothing else to do for setup, kill off the board support code
and have the defconfig use the generic machvec instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-06 16:08:00 +09:00
Magnus Damm
70f784ec1d sh: migor board support
This patch adds basic support for the Migo-R board.

Only simple stuff provided by the cpu specific sh7722 code is in place now,
like serial console port, timers and usb gadget. There is also partial support
for the smc91c111 ethernet controller - unfortunately some driver header file
also needs patching (not included here) to make the driver get IRQ sense
information from the platform data.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:08 +09:00
Nicholas Beck
4862ec0739 sh: Add support for SDK7780 board.
Add support for Renesas Technology Europe SDK7780 board.

Signed-off-by: Nicholas Beck <nbeck@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:04 +09:00
Paul Mundt
1b1e037a89 sh: Kill off -traditional for linker script.
Some of Sam's new work in the kbuild queue depend on ## concatenation
within the linker script, which doesn't work when -traditional is
enabled. -traditional is a legacy remnant anyways, and we no longer
require it for anything, so kill it off completely.

Noted-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:04 +09:00
Paul Mundt
b87bf74724 sh: Drop r7780rp_defconfig, use r7780mp_defconfig as kbuild default.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:03 +09:00
Paul Mundt
a5350a9686 sh: Kill off dead HS771RVoIP board support.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:03 +09:00
Magnus Damm
29ec6778a4 sh: remove voyagergx
This patch removes redundant irq handling code together with unused
consistent alloc code. R2D uart setup code is changed to use
sm501-regs.h and unused header files are removed.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:03 +09:00
Paul Mundt
74d99a5e26 sh: SH-2A FPU support.
Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:57 +09:00
Paul Mundt
03713bd226 sh: Move mach-cayman in with the rest of the boards.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:56 +09:00
Paul Mundt
3e0137f6c7 sh: Kill off the mach-harp and mach-sim machtypes.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:56 +09:00
Paul Mundt
35a74499a4 sh: Fix up default zImage target for sh32.
This was using the absolute path, which was confusing the make target.
Switch it to just 'zImage', as per powerpc.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:56 +09:00
Paul Mundt
d088f32357 sh: Consolidate sh/sh64 Makefiles.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:54 +09:00
Paul Mundt
c2f1755bec sh: Tidy up KBUILD_IMAGE for sh64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:54 +09:00
Paul Mundt
36763b22be sh: Switch SH-5 to use CONFIG_PAGE_OFFSET.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:51 +09:00
Paul Mundt
b4db3aec83 sh: Fix up the _stext references for SH-5.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:49 +09:00
Paul Mundt
4c91d6b105 sh: Fix up the head-y targets for _32 and _64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:45 +09:00
Paul Mundt
c20c20047b sh: Plug SH-5 in to arch/sh/Makefile.
Adds the ISA tuning and a lib64 rule.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:39 +09:00
Manuel Lauss
4d2718d00d sh: fix zImage build with >=binutils-2.18
Starting with binutils somewhere around 2.17.50.14 the vmlinux file
contains a ".note.gnu.build-id" section which doesn't get removed when
the zImage is built; resulting in a 2GB intermediate file and a broken
zImage.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-30 09:54:12 +09:00
Linus Torvalds
821f3eff7c Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (40 commits)
  kbuild: introduce ccflags-y, asflags-y and ldflags-y
  kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP
  kbuild: enable use of AFLAGS and CFLAGS on commandline
  kbuild: enable 'make AFLAGS=...' to add additional options to AS
  kbuild: fix AFLAGS use in h8300 and m68knommu
  kbuild: check for wrong use of CFLAGS
  kbuild: enable 'make CFLAGS=...' to add additional options to CC
  kbuild: fix up CFLAGS usage
  kbuild: make modpost detect unterminated device id lists
  kbuild: call export_report from the Makefile
  kbuild: move Kai Germaschewski to CREDITS
  kconfig/menuconfig: distinguish between selected-by-another options and comments
  kconfig: tristate choices with mixed tristate and boolean values
  include/linux/Kbuild: remove duplicate entries
  kbuild: kill backward compatibility checks
  kbuild: kill EXTRA_ARFLAGS
  kbuild: fix documentation in makefiles.txt
  kbuild: call make once for all targets when O=.. is used
  kbuild: pass -g to assembler under CONFIG_DEBUG_INFO
  kbuild: update _shipped files for kconfig syntax cleanup
  ...

Fix up conflicts in arch/um/sys-{x86_64,i386}/Makefile manually.
2007-10-16 11:23:06 -07:00
Sam Ravnborg
222d394d30 kbuild: enable 'make AFLAGS=...' to add additional options to AS
The variable AFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of AFLAGS with KBUILD_AFLAGS all over
the tree.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-15 21:59:31 +02:00