Commit Graph

79 Commits

Author SHA1 Message Date
Matthew Wilcox
9d511a4b29 [SCSI] advansys: Changes to work on parisc
Change PortAddr to be an unsigned int instead of an unsigned short (IO
Port address are 24 bit on parisc).  Fix a couple of printk argument
warnings.  Remove the Kconfig marking as 'BROKEN'.

I haven't removed the #warning yet because virt_to_bus/bus_to_virt are
only eliminated for narrow boards.  Wide boards need more work.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:54:13 -04:00
Matthew Wilcox
d10fb2c7b5 [SCSI] advansys: Use dma mapping for overrun buffer
Convert the call to virt_to_bus() into a call to dma_map_single().  Some
architectures may require different DMA addresses for different devices,
so allocate one overrun buffer per host rather than one for all cards.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:54:05 -04:00
Matthew Wilcox
b249c7fda2 [SCSI] advansys: Remove a couple of uses of bus_to_virt
Replace ASC_VADDR_TO_U32 and ASC_U32_TO_VADDR with an auto-expanding
array that maps pointers to 32-bit IDs and back.  One of the uses of
ASC_VADDR_TO_U32 was in error; it should have been using ADV_VADDR_TO_U32.

Also replace the use of virt_to_bus when setting the sense_address with
a call to dma_map_single() followed by dma_cache_sync.  This part cribbed
from the 53c700 driver.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:54:00 -04:00
Matthew Wilcox
52c334e945 [SCSI] advansys: convert to use the data buffer accessors
- remove the unnecessary map_single path.
- convert to use the new accessors for the sg lists and the parameters.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>

- convert the statistics to not distinguish between single and sg xfers
- replace ASC_CEILING with DIV_ROUND_UP
- remove an obsolete comment

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:56 -04:00
Matthew Wilcox
fd625f4705 [SCSI] advansys: Remove DvcGetPhyAddr
This rather complex function boiled down to calling virt_to_bus().
Also get rid of some obsolete defines and variables that could never vary.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:52 -04:00
Matthew Wilcox
98d41c29a4 [SCSI] advansys: Move a couple of fields from struct board to struct adv_dvc
board->carrp is a duplicate of asc_dvc->carrier_buf, so cut out the
middle-man and assign directly to carrier_buf.  Move orig_reqp to adv_dvc
too, since it's wide-board specific.  Also eliminate an unnecessary BUG_ON
(we'll never get there with a NULL carrier_buf, and will crash if we do).
The bulk of this patch is rearranging structures so everything's declared
in the right order.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:48 -04:00
Matthew Wilcox
afbb68c35f [SCSI] advansys: Make sdtr_period_tbl a pointer
It's somewhat neater to make this a pointer to one of two tables
than initialising an array in the driver.  Also delete the unused
AscSynIndexToPeriod and rename host_init_sdtr_index to min_sdtr_index

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:45 -04:00
Matthew Wilcox
9d0e96eba1 [SCSI] advansys: Get rid of board index number
It's always a mistake to have your own index of boards; just use the
scsi host number.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:41 -04:00
Matthew Wilcox
f092d2290f [SCSI] advansys: Remove private lock
The board lock was essentially identical with the host lock.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:37 -04:00
Matthew Wilcox
b352f92376 [SCSI] advansys: Sort out debug macros
Replace ASC_DBG{,1,2,3,4,5} with a single variadic macro ASC_DBG.  As
suggested by Jeff Garzik, include DRV_NAME and __FUNCTION__ in the output.
Change all callers to no longer include the function name in the string.

Enabling ADVANSYS_DEBUG to test this feature shows a lot of other problems
that need to be fixed:
 - Reorder asc_prt_* functions now that their prototypes have been removed.
 - There is no longer a struct device in ASC_DVC_CFG/ADV_DVC_CFG, and it
   wasn't necessarily a PCI device to begin with.  Print the bus_id from
   asc_board->dev instead.
 - isr_callback no longer exists.
 - ASC_DBG_PRT_SCSI_CMND isn't being used, so delete asc_prt_scsi_cmnd
   too.
 - A missing semicolon

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:34 -04:00
Matthew Wilcox
b08fc56550 [SCSI] advansys: Remove library version & serial numbers
With the ASC and ADV libraries merged into the driver, there really is
no point in reporting their version numbers, or even trying to maintain
them.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:29 -04:00
Matthew Wilcox
d241149558 [SCSI] advansys: Remove asc_board_t typedef and ASC_BOARDP macro
asc_board_t was simply a typedef for struct asc_board.  ASC_BOARDP()
can be replaced by shost_priv() except in the ASC_STATS* macros which
rely on the cast; add an explicit cast there.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:26 -04:00
Matthew Wilcox
720349a879 [SCSI] advansys: Merge ASC_IERR definitions
There were two blocks of ASC_IERR definitions; one for narrow and one for
wide boards.  Some of the same names were used (with the same values),
and some of the same values were used with different names.  This could
only lead to confusion, so I unified them in one block of definitions
with no overlapping values.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:22 -04:00
Matthew Wilcox
d361db4832 [SCSI] advansys: Sort out irq number mess
The interrupt number was being stored in 4-5 different places, each with
its own type, rules and usage.  Fix this by keeping an unsigned int in
the struct asc_board, and filling it in from the bus probe functions
(since it's different for each of the four bus types).  In order to do
this, we have to allocate the Scsi_Host in the bus probe functions too.
Then we can return an error from advansys_board_found, which requires
a little rearranging of code (and removing of the err_code variable).
Move the Wide Board flag setting into the PCI bus probe function.

Split the AscGetChipIRQ function into three functions (one for each bus
type that needs it) and add some commentary to explain what's going on.
Also get rid of the AscSetChipIRQ function as we only ever set the
interrupt number to the same value it already had.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:18 -04:00
Matthew Wilcox
9a256fa50e [SCSI] advansys: Remove ASC_WIDE_BOARD predicate
Replace it with !ASC_NARROW_BOARD

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:14 -04:00
Matthew Wilcox
ae002fec69 [SCSI] advansys: Remove ASC_SELECT_QUEUE_DEPTHS
It was only ever set; never tested, nor cleared.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:11 -04:00
Matthew Wilcox
52fa077709 [SCSI] advansys: Improve reset handler
- Don't need to set ASC_HOST_IN_RESET any more
 - Don't need to test scp->device->host for NULL -- if it's NULL, we
   couldn't've been called.
 - Use scmd_printk instead of ASC_PRINT

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:06 -04:00
Matthew Wilcox
05848b6e66 [SCSI] advansys: Fix simultaneous calls to ->queuecommand
The narrow board used two global structures to set up a command;
unfortunately they weren't locked, so with two boards in the machine,
one call to queuecommand could corrupt the data being used by the other
call to queuecommand.

Fix this by allocating asc_scsi_q on the stack (64 bytes) and using kmalloc
for the asc_sg_head (2k)

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:53:02 -04:00
Matthew Wilcox
41d2493d34 [SCSI] advansys: Restructure asc_execute_scsi_cmnd()
The wide and narrow boards share identical handling of the return value,
except for some trivial error messages.  Move the handling to the common
end of the function.  Also move variable declarations to the arms of
the `if' that they're used in and delete some pointless comments.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:52:59 -04:00
Matthew Wilcox
6e8905f4a0 [SCSI] advansys: Remove array of scsi targets
The driver was saving a scsi_device for each target, but wasn't doing
anything useful with them.  Just delete the array.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:52:55 -04:00
Matthew Wilcox
512193588d [SCSI] advansys: Eliminate prototypes
Rearrange a lot of the functions in the file to get rid of all the forward
declarations.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:52:49 -04:00
Matthew Wilcox
01fbfe0b83 [SCSI] advansys: Use DRV_NAME
Follow the example of some other drivers by defining DRV_NAME to be
"advansys".  Prevents spelling mistakes.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:48:19 -04:00
Matthew Wilcox
95c9f16284 [SCSI] advansys: Comment/indentation/macro cleanup
- Delete comments relating to the previous structure of the driver.
   I have no intention of honouring them ;-)
 - Reformat comments > 80 columns
 - Remove now-obsolete comments from advansys_interrupt
 - Change adv_get_sglist() from do {} while (1) to for (;;)
 - Return void from AscInitQLinkVar()
 - Take out a level of indentation in adv_get_sglist()
 - Reduce indentation level of AscAsyncFix()
 - Remove unused macros
 - Refactor AscSendScsiQueue slightly

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:48:15 -04:00
Matthew Wilcox
b009bef6cd [SCSI] advansys: Remove some custom wrappers
- Replace ASC_ASSERT() with BUG_ON().
   In a few places, get rid of the assertion altogether -- the ensuing
   crash will tell us all we need to know.  Use BUG() where it fits better
   than BUG_ON().  Also fix a fencepost error in advansys_proc_info().
 - Replace DvcSleepMilliSecond with mdelay.
   Despite its name using 'sleep', the implementation was a delay.
   I've marked some places with XXX where we should probably be using
   msleep instead.  They need to be audited to be sure we can sleep in
   that context.
 - Replace DvcDelayMicroSecond with udelay.
 - Replace DvcDelayNanoSecond with udelay too.
   All callers were multiples of 1000.
 - Remove DvcEnterCritical and DvcLeaveCritical.
   These functions are no-ops, and as the comments said, the spinlock
   protects the critical sections.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:48:11 -04:00
Matthew Wilcox
faac48ecf4 [SCSI] advansys: Remove a check for an impossible condition
AscExeScsiQueue() has one caller, and it passes the address of a
variable; this cannot ever be NULL.  This is the only place that ever
sets ASCQ_ERR_SCSIQ_NULL_PTR, so delete that error code too, as well as
several other unused ASCQ_ERR codes.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:48:07 -04:00
Matthew Wilcox
f05ec594fe [SCSI] advansys: Support 16-byte commands properly
The SCSI midlayer won't send commands greater than ->max_cmd_len.
So the checks on length in asc_build_req and adv_build_req are obsolete
and can be deleted, but also we have to set the max_cmd_len in
advansys_board_found().  Also move the length definitions together, and
write a helpful comment.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:48:03 -04:00
Matthew Wilcox
b2a7a4ba04 [SCSI] advansys: Enable interrupts earlier in queuecommand
Move as much as possible outside the critical section in queuecommand, eg:
 - Set the scsi_done field before acquiring the lock
 - Call asc_scsi_done after dropping the lock

Also remove a comment suggesting we should enable interrupts (now we do)
and do some minor reformatting for readability.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:47:59 -04:00
Matthew Wilcox
349d2c4429 [SCSI] advansys: Remove `active' queue and all remaining internal queueing code
The `active' list was used in the reset handler -- but the midlayer
guarantees that list is empty by the time the reset handler is invoked.
It was also checked in the interrupt routines to be sure that this command
belonged to this board, but we don't need to check that either.  We can
then delete the asc_prt_target_stats() function as it will never print
anything, along with asc_enqueue(), asc_dequeue_list(), asc_rmqueue(),
asc_scsi_done_list(), struct asc_queue, ASC_QUEUE_EMPTY, ASC_TID_ALL,
ASC_FRONT, ASC_BACK, and all the REQ* macros.  Also remove this item from
the todo list.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:47:56 -04:00
Matthew Wilcox
6ed1ef0786 [SCSI] advansys: Remove `done' queue
- Move the guts of asc_scsi_done_list() into a new function, asc_scsi_done.
 - Call asc_scsi_done() in asc_isr_callback() and adv_isr_callback().  The
   comment was wrong; scsi_done cannot enable interrupts.
 - All other places which queued an scp on the done list are error paths
   for queuecommand, and so we can just call asc_scsi_done() in queuecommand
   if we receive an error.
 - We no longer need to keep a list of done requests in advansys_interrupt

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:47:52 -04:00
Matthew Wilcox
7686f02aa8 [SCSI] advansys: Remove a check for an impossible condition
The midlayer guarantees it won't call ->queuecommand for a host which
is handling a reset condition.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:47:48 -04:00
Matthew Wilcox
b66229258f [SCSI] advansys: Remove `waiting' queue
If the adapter is busy, return the request to the midlayer rather than
queueing it in the driver.  asc_execute_queue() and asc_dequeue() become
unused, and we don't need to print out stats on the waiting queue any more.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:47:44 -04:00
Matthew Wilcox
c2dce2fabc [SCSI] advansys: Shrink advansys_board_found a little more
Move the error reporting into AscInitGetConfig, AdvInitGetConfig and
AscInitSetConfig.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:47:41 -04:00
Matthew Wilcox
629d688d5c [SCSI] advansys: Reformat microcode
It's just data, so format it to something that looks more visually
appealing (and saves some lines)

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:47:37 -04:00
Matthew Wilcox
b9d9661400 [SCSI] advansys: Create AdvLoadMicrocode
Split AdvLoadMicrocode out of AdvInitAsc3550Driver, AdvInitAsc38C0800Driver
and AdvInitAsc38C1600Driver.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:47:33 -04:00
Matthew Wilcox
a9f4a59a94 [SCSI] advansys: Create AdvBuildCarrierFreelist
Split AdvBuildCarrierFreelist out of AdvInitAsc3550Driver,
AdvInitAsc38C0800Driver and AdvInitAsc38C1600Driver.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:47:29 -04:00
Matthew Wilcox
b8e5152bf1 [SCSI] advansys: Fix VLB driver name
You can't have two drivers for the same bus type with the same name.
Since ISA and VLB are both isa_drivers, rename the VLB one to advansys_vlb.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:47:25 -04:00
Matthew Wilcox
4bd6d7f356 [SCSI] advansys: Move documentation to Documentation/scsi
The 700+-line comment at the top of the advansys driver fits more comfortably
in Documentation/scsi.

Delete the sections on:
 - kernels supported
 - other files modified (obsolete)
 - source comments (obsolete)
 - tests to run
 - release history (that's what a VCS is for)
 - contacting connectcom (the domain has expired and the phone number is
   now in use by another organisation)

Known problems/fix list is moved down to the section where jejb put his FIXME.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:39:56 -04:00
Matthew Wilcox
d68f432135 [SCSI] advansys: use memcpy instead of open-coded loop
Use memcpy to initialise eep_config instead of a loop.  For
AdvInitFrom38C1600EEP where we need to modify the default EEPROM
configuration, do it after the loop, and do it using the structure
definition, not by finding the right byte.  I think it was wrong for
big-endian machines.

Also delete some non-useful comments and prototypes.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:39:52 -04:00
Matthew Wilcox
13ac2d9c79 [SCSI] advansys: Remove pci_slot_info
The driver kept a copy of the PCI config address; refer to the pci_dev
associated with the card instead.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:39:49 -04:00
Matthew Wilcox
895d6b4ca8 [SCSI] advansys: Remove library-style callback routines
Convert adv_isr_callback, adv_async_callback and asc_isr_callback into
direct calls.  Remove the unused asc_exe_callback.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:39:45 -04:00
Matthew Wilcox
394dbf3f40 [SCSI] advansys: Move struct device out of the cfg structures
The cfg structures are supposed to be disposable after initialisation;
with the 'dev' used for DMA mapping in there, that's not possible.  Move
the dev to the board.

Also inline AscInitFromAscDvcVar into its only caller, remove some
unnecessary prototypes and sort out a few minor formatting issues.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:39:41 -04:00
Matthew Wilcox
4a2d31c811 [SCSI] advansys: Stop using n_io_port in Scsi_Host structure
n_io_port isn't suitable for advansys because some of the boards have
more than 255 bytes of io port space.  There's already a driver-private
replacement, asc_n_io_port, but for some reason the driver was still
setting and occasionally reporting n_io_port.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:39:37 -04:00
Matthew Wilcox
57ba5fe988 [SCSI] advansys: ioremap no longer needs page-aligned addresses
At some point during Linux 2.1 development, ioremap() gained the ability
to handle addresses which weren't page-aligned.  Also expand the CONFIG_PCI
range to encompass that entire section of wide board initialisation, since
all wide boards are PCI.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:39:33 -04:00
Matthew Wilcox
59fcf84409 [SCSI] advansys: delete AscGetChipBusType
By moving a test from AscGetChipBusType into its only caller, we can delete
the whole function

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:39:30 -04:00
Matthew Wilcox
ecec194747 [SCSI] advansys: misc reformatting
Remove some useless forward declarations
Reformat some comments, debug messages, and the occasional piece of real code
Removal of unnecessary braces
Remove duplicate setting of shost->irq

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:39:26 -04:00
Matthew Wilcox
47d853ccbe [SCSI] advansys: remove INQUIRY sniffing
Use slave_configure() to do all the work that used to be done in
AscInquiryHandling and AdvInquiryHandling.  Split slave_configure into
two functions, one for wide and one for narrow controllers.

Remove some unused definitions, duplicate definitions, unnecessary
declarations, and scsireqq, cap_info and inquiry from struct asc_board.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:39:22 -04:00
Matthew Wilcox
ce3a7f1202 [SCSI] advansys: remove AscCompareString()
AscCompareString() is just another name for strncmp

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:39:15 -04:00
Matthew Wilcox
9649af39e3 [SCSI] advansys: More PCI cleanups
- Remove wrappers around the PCI configuration space accessors
 - Call pci_set_master() instead of poking at config space directly
 - Move the latency setting into one function called for both narrow and
   wide boards.
 - Tidy up AdvInitGetConfig() a little.
 - Delete a few unused prototypes and definitions.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:39:12 -04:00
Matthew Wilcox
71f36115d2 [SCSI] advansys: Update resource management
Make sure the resources are reserved and released by all the callers of
advansys_board_found().  This eliminates the check_region-style race.
It also allows us to use the pci_request_regions() API.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:39:08 -04:00
Matthew Wilcox
c304ec9473 [SCSI] advansys: Convert to ISA driver model
Register two isa_drivers, one for ISA and one for VLB, in order to
preserve detection order.  When deleting advansys_detect, we lose the
last vestiges of the code that limited IO port scanning.  This code
has been effectively disabled for many years anyway; I'll restore it
in a module_param later.  We also lose the code that placed all ISA PnP
cards into WaitForKey state -- drivers shouldn't be doing this anyway.
The asc_host array goes away too.  Also remove some IOADR and other
definitions, such as ASC_NUM_BOARD_SUPPORTED.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:39:04 -04:00