Commit Graph

24 Commits

Author SHA1 Message Date
Russell King
10dd5ce28d [ARM] Remove compatibility layer for ARM irqs
set_irq_chipdata -> set_irq_chip_data
get_irq_chipdata -> get_irq_chip_data
do_level_IRQ -> handle_level_irq
do_edge_IRQ -> handle_edge_irq
do_simple_IRQ -> handle_simple_irq
irqdesc -> irq_desc
irqchip -> irq_chip

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30 12:24:47 +00:00
Linus Torvalds
0cd61b68c3 Initial blind fixup for arm for irq changes
Untested, but this should fix up the bulk of the totally mechanical
issues, and should make the actual detail fixing easier.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06 10:59:54 -07:00
Komal Shah
1630b52ddf [PATCH] ARM: OMAP: Check gpio_fck not gpio_ick
Check gpio_fck not gpio_ick.

Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:51:08 +03:00
Hiroshi DOYU
bee7930f4a ARM: OMAP: GPIO: IRQSTATUS2 workaround for retention state
In OMAP2420, an incoming GPIO interrupt always sets both GPIO_IRQSTATUS1
and GPIO_IRQSTATUS2, even if the relevant bit is disabled in
GPIO_IRQENABLE1/2 and DSP doesn't use GPIO at all. GPIO_IRQSTATUS1
is for MPU and GPIO_IRQSTATUS2 is for DSP. If IRQSTATUS is set, this
will prevent the system from going to idle state. This patch also clears
IRQSTATUS2 to avoid the above situation.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:46 +03:00
Tony Lindgren
0d9356cbb5 ARM: OMAP: Fix typo for 24xx GPIO resume
Fix typo for 24xx GPIO resume

Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:45 +03:00
David Brownell
893a668ee2 ARM: OMAP: Remove Remove superfluous/recursive locking for GPIO
Remove Remove superfluous/recursive locking for GPIO

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:41 +03:00
Tony Lindgren
4196dd6baa ARM: OMAP: Reset GPIO irq state after free_irq()
This is needed to reset GPIO after free_irq().

Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:38 +03:00
Jonathan McDowell
193e68be33 ARM: OMAP: Fix OMAP1 compilation after MPUIO check change
The recent MPUIO range change fix breaks compilation if
CONFIG_ARCH_OMAP24XX isn't defined; it should be OMAP_MAX_GPIO_LINES not
MAX_GPIO_LINES I believe. This one liner fixes it.

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:30 +03:00
Imre Deak
5a4e86daa2 ARM: OMAP: GPIO: fix MPUIO check
- MPUIO doesn't exist on OMAP2
- no error was returned for too big MPUIO numbers

Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25 12:41:27 +03:00
David Brownell
38c677cb9a [ARM] 3739/1: genirq updates: irq_chip, add and use irq_chip.name
Patch from David Brownell

ARM genirq cleanups/updates:

    - Start switching platforms to newer APIs
        * use "irq_chip" name, not "irqchip"
        * providing irq_chip.name

    - Show irq_chip.name in /proc/interrupts, like on x86.

This update a bit more than half of the ARM code.  The irq_chip.name
values were chosen to match docs (if I have them) or be otherwise
obvious ("FPGA", "CPLD", or matching the code).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-01 22:26:25 +01:00
Thomas Gleixner
29454dde27 [PATCH] genirq: Fixup ARM devel merge
ARM devel merge introduced new machine functionality which was not
covered by the ARM -> genirq patches. Fix it up and make it compile
again.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 17:29:57 -07:00
Linus Torvalds
b4b9034132 Merge branch 'genirq' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'genirq' of master.kernel.org:/home/rmk/linux-2.6-arm: (24 commits)
  [ARM] 3683/2:  ARM: Convert at91rm9200 to generic irq handling
  [ARM] 3682/2:  ARM: Convert ixp4xx to generic irq handling
  [ARM] 3702/1: ARM: Convert ixp23xx to generic irq handling
  [ARM] 3701/1: ARM: Convert plat-omap to generic irq handling
  [ARM] 3700/1: ARM: Convert lh7a40x to generic irq handling
  [ARM] 3699/1: ARM: Convert s3c2410 to generic irq handling
  [ARM] 3698/1: ARM: Convert sa1100 to generic irq handling
  [ARM] 3697/1: ARM: Convert shark to generic irq handling
  [ARM] 3696/1: ARM: Convert clps711x to generic irq handling
  [ARM] 3694/1: ARM: Convert ecard driver to generic irq handling
  [ARM] 3693/1: ARM: Convert omap1 to generic irq handling
  [ARM] 3691/1: ARM: Convert imx to generic irq handling
  [ARM] 3688/1: ARM: Convert clps7500 to generic irq handling
  [ARM] 3687/1: ARM: Convert integrator to generic irq handling
  [ARM] 3685/1: ARM: Convert pxa to generic irq handling
  [ARM] 3684/1: ARM: Convert l7200 to generic irq handling
  [ARM] 3681/1: ARM: Convert ixp2000 to generic irq handling
  [ARM] 3680/1: ARM: Convert footbridge to generic irq handling
  [ARM] 3695/1: ARM drivers/pcmcia: Fixup includes
  [ARM] 3689/1: ARM drivers/input/touchscreen: Fixup includes
  ...

Manual conflict resolved in kernel/irq/handle.c (butt-ugly ARM tickless
code).
2006-07-02 15:07:45 -07:00
Linus Torvalds
a8c4c20dfa Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits)
  [ARM] 3541/2: workaround for PXA27x erratum E7
  [ARM] nommu: provide a way for correct control register value selection
  [ARM] 3705/1: add supersection support to ioremap()
  [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure
  [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support
  [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency
  [ARM] 3703/1: Add help description for ARCH_EP80219
  [ARM] 3678/1: MMC: Make OMAP MMC work
  [ARM] 3677/1: OMAP: Update H2 defconfig
  [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1
  [ARM] Add section support to ioremap
  [ARM] Fix sa11x0 SDRAM selection
  [ARM] Set bit 4 on section mappings correctly depending on CPU
  [ARM] 3666/1: TRIZEPS4 [1/5] core
  ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring
  ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE
  ARM: OMAP: Update dmtimers
  ARM: OMAP: Make clock variables static
  ARM: OMAP: Fix GPMC compilation when DEBUG is defined
  ARM: OMAP: Mux updates for external DMA and GPIO
  ...
2006-07-02 15:04:12 -07:00
Thomas Gleixner
418ca1f0a0 [ARM] 3701/1: ARM: Convert plat-omap to generic irq handling
Patch from Thomas Gleixner

From: Thomas Gleixner <tglx@linutronix.de>

Fixup the conversion to generic irq subsystem.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01 22:32:41 +01:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Imre Deak
99c477074d ARM: OMAP: Fix GPIO IRQ mask handling
The GPIO IRQ mask was retrieved incorrectly in cases where we have a mask
register instead of an enable register. Also we should only return the
valid bits depending on the bank size.

This fixes a bug on 1510/1610 based OMAPs where GPIO IRQs are not
delivered.

Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26 16:16:07 -07:00
Imre Deak
ea6dedd7fb ARM: OMAP: GPIO IRQ lazy IRQ disable fix
- The current OMAP GPIO IRQ framework doesn't use the do_edge_IRQ,
  do_level_IRQ handlers, but instead calls do_simple_IRQ. This
  doesn't handle disabled interrupts properly, so drivers will
  still get interrupts after calling disable_irq. The patch solves
  this by respecting the irq_desc.disable_depth and irq_desc.running
  counters.  When one of these is non-zero the handler is not called,
  the interrupt is masked and marked as pending. The pending interrupt
  will be serviced when the running handler returns. This is according
  to the same semantics as the standard do_edge_IRQ and do_level_IRQ
  handlers have, so one day we should use them instead of do_simple_IRQ.

- Process only interrupts that are not masked. The ISR may contain
  pending interrupts that are masked these shouldn't be processed.

- Move the bank IRQ unmasking out of the IRQ dispatch loop. If there
  are further iterations we shouldn't unmask it if there are level
  triggered interrupts pending.

Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26 16:16:00 -07:00
Tony Lindgren
6e60e79a1d [ARM] 3429/1: ARM: OMAP: 4/8 Update GPIO
Patch from Tony Lindgren

Update OMAP GPIO code from linux-omap tree:

- Fix omap16xx edge control by Juha Yrjola
- Support for additional omap16xx trigger modes by Dirk Behme
- Fix edge detection by Tony Lindgren et al.
- Better support for omap15xx and omap310 by Andrej Zaborowski
- Fix omap15xx interrupt bug by Petukhov Nikolay

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 17:46:23 +01:00
Tony Lindgren
30ff720b40 ARM: OMAP: 4/4 Fix clock framework to use clk_enable/disable misc
This patch fixes OMAP clock framework to use clk_enable/disable
instead of clk_use/unuse as specified in include/linux/clk.h.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-01-17 15:33:51 -08:00
Russell King
f8ce25476d [ARM] Move asm/hardware/clock.h to linux/clk.h
This is needs to be visible to other architectures using the AMBA
bus and peripherals.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 16:15:52 +00:00
Tony Lindgren
1a8bfa1eb9 [ARM] 3142/1: OMAP 2/5: Update files common to omap1 and omap2
Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.
The highlights of the patch are:

- Serial port and framebuffer init improvments by Imre Deak

- Common omap pin mux framework by Tony Lindgren

- Common omap clock framework by Tony Lindren

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10 14:26:50 +00:00
Tony Lindgren
92105bb706 [ARM] 2887/1: OMAP 2/4: Update files common to omap1 and omap2, take 2
Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.
The highlights of the patch are:
- Clock updates by Tuukka Tikkanen, Juha Yrjola,
  Daniel Petrini and Tony Lindgren
- DMA fixes by Imre Deak, Juha Yrjola and Daniel Petrini
- Add support to dual-mode hardware timers by Lauri Leukkunen
- GPIO support for 24xx by Paul Mundt
- GPIO wake-up support by Tony Lindgren
- Better GPIO interrupt handler to not lose interrupts by
  Ralph Walden and Ladislav Michl
- Power Management updates by Tuukka Tikkanen
- Make Power Management code use new SRAM functions by
  Tony Lindgren

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-07 17:20:26 +01:00
Russell King
664399e1fb [ARM] Wrap calls to descriptor handlers
This is part of Thomas Gleixner's generic IRQ patch, which converts
ARM to use the generic IRQ subsystem.  Here, we wrap calls to
desc->handler() in an inline function, desc_handle_irq().  This
reduces the size of Thomas' patch since the changes become more
localised.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-04 19:45:00 +01:00
Tony Lindgren
5e1c5ff478 [PATCH] ARM: 2812/1: OMAP update 7c/11: Move arch-omap to plat-omap
Patch from Tony Lindgren

This patch move common OMAP code from arch-omap to plat-omap
directory.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10 19:58:15 +01:00