Commit Graph

195 Commits

Author SHA1 Message Date
Dave Jones
129f8ae9b1 Revert "[CPUFREQ] Disable sysfs ui for p4-clockmod."
This reverts commit e088e4c9cd.

Removing the sysfs interface for p4-clockmod was flagged as a
regression in bug 12826.

Course of action:
 - Find out the remaining causes of overheating, and fix them
   if possible. ACPI should be doing the right thing automatically.
   If it isn't, we need to fix that.
 - mark p4-clockmod ui as deprecated
 - try again with the removal in six months.

It's not really feasible to printk about the deprecation, because
it needs to happen at all the sysfs entry points, which means adding
a lot of strcmp("p4-clockmod".. calls to the core, which.. bleuch.

Signed-off-by: Dave Jones <davej@redhat.com>
2009-03-09 15:07:33 -04:00
Venkatesh Pallipadi
1ca3abdb6a [CPUFREQ] Make ignore_nice_load setting of ondemand work as expected.
ondemand micro-accounting of idle time changes broke ignore_nice_load
sysfs setting due to a thinko in the code.

The bug entry:
http://bugzilla.kernel.org/show_bug.cgi?id=12310

Reported-by: Jim Bray <jimsantelmo@gmail.com>

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2009-02-05 12:25:26 -05:00
Linus Torvalds
4e9b1c184c Merge branch 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  [IA64] fix typo in cpumask_of_pcibus()
  x86: fix x86_32 builds for summit and es7000 arch's
  cpumask: use work_on_cpu in acpi-cpufreq.c for read_measured_perf_ctrs
  cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write
  cpumask: use cpumask_var_t in acpi-cpufreq.c
  cpumask: use work_on_cpu in acpi/cstate.c
  cpumask: convert struct cpufreq_policy to cpumask_var_t
  cpumask: replace CPUMASK_ALLOC etc with cpumask_var_t
  x86: cleanup remaining cpumask_t ops in smpboot code
  cpumask: update pci_bus_show_cpuaffinity to use new cpumask API
  cpumask: update local_cpus_show to use new cpumask API
  ia64: cpumask fix for is_affinity_mask_valid()
2009-01-10 06:12:18 -08:00
Frederik Schwarzer
0211a9c850 trivial: fix an -> a typos in documentation and comments
It is always "an" if there is a vowel _spoken_ (not written).
So it is:
"an hour" (spoken vowel)
but
"a uniform" (spoken 'j')

Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-06 11:28:07 +01:00
Rusty Russell
835481d9bc cpumask: convert struct cpufreq_policy to cpumask_var_t
Impact: use new cpumask API to reduce memory usage

This is part of an effort to reduce structure sizes for machines
configured with large NR_CPUS.  cpumask_t gets replaced by
cpumask_var_t, which is either struct cpumask[1] (small NR_CPUS) or
struct cpumask * (large NR_CPUS).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-06 09:05:31 +01:00
Mike Chan
187d9f4ed4 [CPUFREQ] Fix on resume, now preserves user policy min/max.
Previously driver resume would always set the current policy min/max with
the cpuinfo min/max, defined by user_policy.min/max. Resulting in a reset
of policy settings when policy.min/max != cpuinfo.min/max when coming out
of suspend. Now user_policy is saved as the policy instead of cpuinfo to
preserve what the user actually set.

Signed-off-by: Mike Chan <mike@android.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-12-05 15:20:11 -05:00
Matthew Garrett
e088e4c9cd [CPUFREQ] Disable sysfs ui for p4-clockmod.
p4-clockmod has a long history of abuse.   It pretends to be a CPU
frequency scaling driver, even though it doesn't actually change
the CPU frequency, but instead just modulates the frequency with
wait-states.
The biggest misconception is that when running at the lower 'frequency'
p4-clockmod is saving power.  This isn't the case, as workloads running
slower take longer to complete, preventing the CPU from entering deep C states.

However p4-clockmod does have a purpose.  It can prevent overheating.
Having it hooked up to the cpufreq interfaces is the wrong way to achieve
cooling however. It should instead be hooked up to ACPI.

This diff introduces a means for a cpufreq driver to register with the
cpufreq core, but not present a sysfs interface.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-12-05 15:20:10 -05:00
Andrea Righi
4f6e6b9f97 [CPUFREQ] Fix BUG: using smp_processor_id() in preemptible code
Use get_cpu()/put_cpu() in cpufreq_ondemand init routine, instead of
smp_processor_id() to avoid the following BUG:

[   35.313118] BUG: using smp_processor_id() in preemptible [00000000] code=: modprobe/4952
[   35.313132] caller is cpufreq_gov_dbs_init+0xa/0x8f [cpufreq_ondemand]
[   35.313140] Pid: 4952, comm: modprobe Not tainted 2.6.27-rc5-mm1 #23
[   35.313145] Call Trace:
[   35.313158]  [<ffffffff80361ff7>] debug_smp_processor_id+0xd7/0xe0
[   35.313167]  [<ffffffffa010800a>] cpufreq_gov_dbs_init+0xa/0x8f [cpufreq_ondemand]
[   35.313176]  [<ffffffff8020903b>] _stext+0x3b/0x160
[   35.313185]  [<ffffffff804768c5>] __mutex_unlock_slowpath+0xe5/0x190
[   35.313195]  [<ffffffff8026236a>] trace_hardirqs_on_caller+0xca/0x140
[   35.313205]  [<ffffffff8026ef4c>] sys_init_module+0xdc/0x210
[   35.313212]  [<ffffffff8020b7cb>] system_call_fastpath+0x16/0x1b

Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09 13:52:44 -04:00
Sven Wegener
c4d14bc0bb [CPUFREQ] Don't export governors for default governor
We don't need to export the governors for use as the default governor,
because the default governor will be built-in anyway and we can access
the symbol directly.

This also fixes the following sparse warnings:

drivers/cpufreq/cpufreq_conservative.c:578:25: warning: symbol 'cpufreq_gov_conservative' was not declared. Should it be static?
drivers/cpufreq/cpufreq_ondemand.c:582:25: warning: symbol 'cpufreq_gov_ondemand' was not declared. Should it be static?
drivers/cpufreq/cpufreq_performance.c:39:25: warning: symbol 'cpufreq_gov_performance' was not declared. Should it be static?
drivers/cpufreq/cpufreq_powersave.c:38:25: warning: symbol 'cpufreq_gov_powersave' was not declared. Should it be static?
drivers/cpufreq/cpufreq_userspace.c:190:25: warning: symbol 'cpufreq_gov_userspace' was not declared. Should it be static?

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09 13:52:44 -04:00
venkatesh.pallipadi@intel.com
8080091310 [CPUFREQ][6/6] cpufreq: Add idle microaccounting in ondemand governor
Use get_cpu_idle_time_us() to get micro-accounted idle information.
This enables ondemand to get more accurate idle and busy timings
than the jiffy based calculation. As a result, we can decrease
the ondemand safety gaurd band from 80-10 to 95-3.

Results in more aggressive power savings.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09 13:52:44 -04:00
venkatesh.pallipadi@intel.com
e9d95bf7eb [CPUFREQ][4/6] cpufreq_ondemand: Parameterize down differential
Use a parameter for down differential, instead of hardcoded 10%. Follow-on
patch changes the down-differential dynamically, based on whether
we are using idle micro-accounting or not.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09 13:52:44 -04:00
venkatesh.pallipadi@intel.com
3430502d35 [CPUFREQ][3/6] cpufreq: get_cpu_idle_time() changes in ondemand for idle-microaccounting
Preparatory changes for doing idle micro-accounting in ondemand governor.
get_cpu_idle_time() gets extra parameter and returns idle time and also the
wall time that corresponds to the idle time measurement.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09 13:52:44 -04:00
venkatesh.pallipadi@intel.com
c43aa3bd99 [CPUFREQ][2/6] cpufreq: Change load calculation in ondemand for software coordination
Change the load calculation algorithm in ondemand to work well with software
coordination of frequency across the dependent cpus.

Multiply individual CPU utilization with the average freq of that logical CPU
during the measurement interval (using getavg call). And find the max CPU
utilization number in terms of CPU freq. That number is then used to
get to the target freq for next sampling interval.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09 13:52:43 -04:00
venkatesh.pallipadi@intel.com
bf0b90e357 [CPUFREQ][1/6] cpufreq: Add cpu number parameter to __cpufreq_driver_getavg()
Add a cpu parameter to __cpufreq_driver_getavg(). This is needed for software
cpufreq coordination where policy->cpu may not be same as the CPU on which we
want to getavg frequency.

A follow-on patch will use this parameter to getavg freq from all cpus
in policy->cpus.

Change since last patch. Fix the offline/online and suspend/resume
oops reported by Youquan Song <youquan.song@intel.com>

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09 13:52:43 -04:00
Ben Slusky
8217e4f4c9 [CPUFREQ] use deferrable delayed work init in conservative governor
Venki Pallipadi made a similar change to the ondemand governor a while
back (in commit 28287033e1). It seems to
work just as well in the conservative governor, leading to fewer wakeups
as reported by powertop.

Signed-off-by: Ben Slusky <sluskyb@paranoiacs.org>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09 13:52:43 -04:00
Julia Lawall
f1829e4a37 [CPUFREQ] drivers/cpufreq/cpufreq.c: Adjust error handling code involving cpufreq_cpu_put
After calling cpufreq_cpu_get, error handling code should call
cpufreq_cpu_put.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r@
expression x,E;
statement S;
position p1,p2,p3;
@@

(
if ((x = cpufreq_cpu_get@p1(...)) == NULL || ...) S
|
x = cpufreq_cpu_get@p1(...)
... when != x
if (x == NULL || ...) S
)
<...
if@p3 (...) { ... when != cpufreq_cpu_put(x)
                  when != if (x) { ... cpufreq_cpu_put(x); ...}
    return@p2 ...;
}
...>
(
return x;
|
return 0;
|
x = E
|
E = x
|
cpufreq_cpu_put(x)
)

@exists@
position r.p1,r.p2,r.p3;
expression x;
int ret != 0;
statement S;
@@

* x = cpufreq_cpu_get@p1(...)
  <...
* if@p3 (...)
  S
  ...>
* return@p2 \(NULL\|ret\);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09 13:52:43 -04:00
Akinobu Mita
888a794cac [CPUFREQ] add error handling for cpufreq_register_governor() error
Add error handling for cpufreq_register_governor() error

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: cpufreq@lists.linux.org.uk
Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09 13:52:43 -04:00
Dave Jones
f068c04ba6 [CPUFREQ] Fix -Wshadow warning in conservative governor.
drivers/cpufreq/cpufreq_conservative.c:336:15: warning: symbol 'freq_step' shadows an earlier one

Just rename the local variable.

Signed-off-by: Dave Jones <davej@redhat.com>
2008-08-08 16:00:48 -04:00
Thomas Renninger
a1531acd43 cpufreq acpi: only call _PPC after cpufreq ACPI init funcs got called already
Ingo Molnar provided a fix to not call _PPC at processor driver
initialization time in "[PATCH] ACPI: fix cpufreq regression" (git
commit e4233dec74)

But it can still happen that _PPC is called at processor driver
initialization time.

This patch should make sure that this is not possible anymore.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-30 09:41:43 -07:00
Linus Torvalds
26dcce0fab Merge branch 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
  NR_CPUS: Replace NR_CPUS in speedstep-centrino.c
  cpumask: Provide a generic set of CPUMASK_ALLOC macros, FIXUP
  NR_CPUS: Replace NR_CPUS in cpufreq userspace routines
  NR_CPUS: Replace per_cpu(..., smp_processor_id()) with __get_cpu_var
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genapic_flat_64.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genx2apic_uv_x.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/proc.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/mcheck/mce_64.c
  cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c, fix
  cpumask: Use optimized CPUMASK_ALLOC macros in the centrino_target
  cpumask: Provide a generic set of CPUMASK_ALLOC macros
  cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c
  cpumask: Optimize cpumask_of_cpu in kernel/time/tick-common.c
  cpumask: Optimize cpumask_of_cpu in drivers/misc/sgi-xp/xpc_main.c
  cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/ldt.c
  cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/io_apic_64.c
  cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr
  Revert "cpumask: introduce new APIs"
  cpumask: make for_each_cpu_mask a bit smaller
  net: Pass reference to cpumask variable in net/sunrpc/svc.c
  ...

Fix up trivial conflicts in drivers/cpufreq/cpufreq.c manually
2008-07-23 18:37:44 -07:00
Linus Torvalds
6d52dcbe56 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] cpufreq: remove CVS keywords
  [CPUFREQ] change cpu freq arrays to per_cpu variables
2008-07-21 15:10:37 -07:00
Mike Travis
b38868aabe NR_CPUS: Replace NR_CPUS in cpufreq userspace routines
* Replace arrays sized by NR_CPUS with percpu variables.

    Prior reference: http://marc.info/?l=linux-kernel&m=120251421825989&w=4
    Subject:    [PATCH 1/4] cpufreq: change cpu freq tables to per_cpu variables
    From:       Mike Travis <travis () sgi ! com>
    Date:       2008-02-08 23:37:39

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 10:21:11 +02:00
Ingo Molnar
68083e05d7 Merge commit 'v2.6.26-rc9' into cpus4096 2008-07-06 14:23:39 +02:00
Linus Torvalds
cc55875e26 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix format string bug.
2008-06-09 11:27:55 -07:00
Chris Wright
326f6a5c9c [CPUFREQ] Fix format string bug.
Format string bug.  Not exploitable, as this is only writable by root,
but worth fixing all the same.

Spotted-by: Ilja van Sprundel <ilja@netric.org>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-06-09 13:24:55 -04:00
CHIKAMA masaki
879000f944 cpufreq: fix null object access on Transmeta CPU
If cpu specific cpufreq driver(i.e.  longrun) has "setpolicy" function,
governor object isn't set into cpufreq_policy object at "__cpufreq_set_policy"
function in driver/cpufreq/cpufreq.c .

This causes a null object access at "store_scaling_setspeed" and
"show_scaling_setspeed" function in driver/cpufreq/cpufreq.c when reading or
writing through /sys interface (ex.  cat
/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed)

Addresses:
	http://bugzilla.kernel.org/show_bug.cgi?id=10654
	https://bugzilla.redhat.com/show_bug.cgi?id=443354

Signed-off-by: CHIKAMA Masaki <masaki.chikama@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Chuck Ebbert <cebbert@redhat.com>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06 11:29:11 -07:00
Lothar Waßmann
dca0261393 [CPUFREQ] fix double unlock of cpu_policy_rwsem in drivers/cpufreq/cpufreq.c
In drivers/cpufreq/cpufreq.c the function cpufreq_add_dev() takes the
error exit 'err_out_unregister' from different places once with the
'cpu_policy_rwsem' lock held, once with the lock released:
|		if (ret)
|			goto err_out_unregister;
|	}
|
|	policy->governor = NULL; /* to assure that the starting sequence is
|				  * run in cpufreq_set_policy */
|
|	/* set default policy */
|	ret = __cpufreq_set_policy(policy, &new_policy);
|	policy->user_policy.policy = policy->policy;
|	policy->user_policy.governor = policy->governor;
|
|	unlock_policy_rwsem_write(cpu);
|
|	if (ret) {
|		dprintk("setting policy failed\n");
|		goto err_out_unregister;
|	}

This leads to the following error message in case of a failing
__cpufreq_set_policy() call:
=====================================
[ BUG: bad unlock balance detected! ]
-------------------------------------
swapper/1 is trying to release lock (&per_cpu(cpu_policy_rwsem, cpu)) at:
[<c01b4564>] unlock_policy_rwsem_write+0x30/0x40
but there are no more locks to release!

other info that might help us debug this:
1 lock held by swapper/1:
 #0:  (sysdev_drivers_lock){--..}, at: [<c018fd18>] sysdev_driver_register+0x74/0x130

stack backtrace:
[<c002f588>] (dump_stack+0x0/0x14) from [<c00692fc>] (print_unlock_inbalance_bug+0xc8/0x104)
[<c0069234>] (print_unlock_inbalance_bug+0x0/0x104) from [<c006b7ac>] (lock_release_non_nested+0xc4/0x19c)
 r6:00000028 r5:c3c1ab80 r4:c01b4564
[<c006b6e8>] (lock_release_non_nested+0x0/0x19c) from [<c006b9e0>] (lock_release+0x15c/0x18c)
 r8:60000013 r7:00000001 r6:c01b4564 r5:c0541bb4 r4:c3c1ab80
[<c006b884>] (lock_release+0x0/0x18c) from [<c0061ba0>] (up_write+0x24/0x30)
 r8:c0541b80 r7:00000000 r6:ffffffea r5:c3c34828 r4:c0541b8c
[<c0061b7c>] (up_write+0x0/0x30) from [<c01b4564>] (unlock_policy_rwsem_write+0x30/0x40)
 r4:c3c34884
[<c01b4534>] (unlock_policy_rwsem_write+0x0/0x40) from [<c01b4c40>] (cpufreq_add_dev+0x324/0x398)
[<c01b491c>] (cpufreq_add_dev+0x0/0x398) from [<c018fd64>] (sysdev_driver_register+0xc0/0x130)
[<c018fca4>] (sysdev_driver_register+0x0/0x130) from [<c01b3574>] (cpufreq_register_driver+0xbc/0x174)

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-05-29 12:10:12 -04:00
Mike Travis
068b12772a cpufreq: use performance variant for_each_cpu_mask_nr
Change references from for_each_cpu_mask to for_each_cpu_mask_nr
where appropriate

Reviewed-by: Paul Jackson <pj@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 18:35:12 +02:00
Dominik Brodowski
4f74369422 [CPUFREQ] clarify license of freq_table.c
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-05-22 16:38:03 -04:00
Mike Travis
7a6aedfac9 [CPUFREQ] change cpu freq arrays to per_cpu variables
Change cpufreq_policy and cpufreq_governor pointer tables
from arrays to per_cpu variables in the cpufreq subsystem.

Also some minor complaints from checkpatch.pl fixed.

Based on:
	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
	git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-05-19 18:17:49 -04:00
Shaohua Li
6501faf8c1 [CPUFREQ] state info wrong after resume
Sometimes old_index != stat->last_index, see cpufreq_update_policy, bios can
change cpu setting in resume.  In my test, after resume cpu is in lowest
speed, but the stat info shows cpu is in full speed.  This patch makes the
stat info correct after a resume.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-04-28 16:27:08 -04:00
Alessandro Guido
30d221db44 [CPUFREQ] allow use of the powersave governor as the default one
Allow use of the powersave cpufreq governor as the default one for EMBEDDED
configs.

Signed-off-by: Alessandro Guido <alessandro.guido@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-04-28 16:27:08 -04:00
Darrick J. Wong
e8628dd06d [CPUFREQ] expose cpufreq coordination requirements regardless of coordination mechanism
Currently, affected_cpus shows which CPUs need to have their frequency
coordinated in software.  When hardware coordination is in use, the contents
of this file appear the same as when no coordination is required.  This can
lead to some confusion among user-space programs, for example, that do not
know that extra coordination is required to force a CPU core to a particular
speed to control power consumption.

To fix this, create a "related_cpus" attribute that always displays the
coordination map regardless of whatever coordination strategy the cpufreq
driver uses (sw or hw).  If the cpufreq driver does not provide a value, fall
back to policy->cpus.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-04-28 16:27:08 -04:00
Cesar Eduardo Barros
25aca347d4 [CPUFREQ] fix show_trans_table
Fix show_trans_table when it overflows PAGE_SIZE.

* Not all snprintf calls were protected against being passed a negative
length.
* When show_trans_table overflows, len might be > PAGE_SIZE. In that case,
returns PAGE_SIZE.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
2008-04-28 15:05:44 -04:00
Cesar Eduardo Barros
74212ca432 [CPUFREQ] Warn when cpufreq_register_notifier called before pure initcalls
If cpufreq_register_notifier is called before pure initcalls,
init_cpufreq_transition_notifier_list will overwrite whatever it did,
causing notifiers to be ignored.

Print some noise to the kernel log if that happens.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
2008-04-28 15:05:44 -04:00
Dave Jones
4570911811 [CPUFREQ] Refactor locking in cpufreq_add_dev
Simplify this by moving the unlocking out of the error
paths into the exit path.

Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
2008-04-28 15:05:42 -04:00
Dave Jones
905d77cd95 [CPUFREQ] more CodingStyle
void * p   ->  void *p
no space between function parameters
removed excess whitespace

Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
2008-04-28 15:05:42 -04:00
Dave Jones
4d34a67d02 [CPUFREQ] CodingStyle
return is not a function.

Signed-off-by: Dave Jones <davej@redhat.com>
2008-04-28 15:05:41 -04:00
Dave Jones
c906049447 [CPUFREQ] Slightly shorten the error paths of cpufreq_suspend/cpufreq_resume
Signed-off-by: Dave Jones <davej@redhat.com>
2008-04-28 15:05:41 -04:00
Sam Ravnborg
f6ebef30e2 [CPUFREQ] fix section mismatch warnings
Fix the following warnings:
WARNING: vmlinux.o(.text+0xfe6711): Section mismatch in reference from the function cpufreq_unregister_driver() to the variable .cpuinit.data:cpufreq_cpu_notifier
WARNING: vmlinux.o(.text+0xfe68af): Section mismatch in reference from the function cpufreq_register_driver() to the variable .cpuinit.data:cpufreq_cpu_notifier
WARNING: vmlinux.o(.exit.text+0xc4fa): Section mismatch in reference from the function cpufreq_stats_exit() to the variable .cpuinit.data:cpufreq_stat_cpu_notifier

The warnings were casued by references to unregister_hotcpu_notifier()
from normal functions or exit functions.
This is flagged by modpost as a potential error because
it does not know that for the non HOTPLUG_CPU
scenario the unregister_hotcpu_notifier() is a nop.
Silence the warning by replacing the __initdata
annotation with a __refdata annotation.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
2008-03-05 14:45:31 -05:00
Dave Jones
a07530b445 [CPUFREQ] Fix missing cpufreq_cpu_put() call in ->store
refactor to use gotos instead of explicit exit paths

Signed-off-by: Dave Jones <davej@redhat.com>
2008-03-05 14:45:31 -05:00
Dave Jones
0db4a8a99f [CPUFREQ] Fix missing cpufreq_cpu_put() call in ->show
refactor to use gotos instead of explicit exit paths

Signed-off-by: Dave Jones <davej@redhat.com>
2008-03-05 14:45:31 -05:00
Balaji Rao
7ab4705045 cpufreq: fix kobject reference count handling
The cpufreq core should not take an extra kobject reference count for no
reason, and then refuse to release it.  This has been reported as
keeping machines from properly powering down all the way.


Signed-off-by: Balaji Rao <balajirrao@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Yi Yang <yi.y.yang@intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Frans Pop <elendil@planet.nl>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21 15:27:06 -08:00
Stefano Brivio
232e8884cb [CPUFREQ] fix configuration help message
cpufreq support can't be built as a module. Fix the related configuration
help message.

Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-02-06 22:57:58 -05:00
Venki Pallipadi
9e76988e93 [CPUFREQ] Eliminate cpufreq_userspace scaling_setspeed deadlock
Eliminate cpufreq_userspace scaling_setspeed deadlock.

Luming Yu recently uncovered yet another cpufreq related deadlock.
One thread that continuously switches the governors and the other thread that
repeatedly cats the contents of cpufreq directory causes both these threads to
go into a deadlock.

Detailed examination of the deadlock showed the exact flow before the deadlock
as:

Thread 1			Thread 2
________			________
				cats files under /sys/devices/.../cpufreq/
Set governor to userspace
  Adds a new sysfs entry for
  scaling_setspeed
				cats files under /sys/devices/.../cpufreq/

Set governor to performance
  Holds cpufreq_rw_sem in write
  mode
  Sends a STOP notify to
  userspace governor
				cat /sys/devices/.../cpufreq/scaling_setspeed
				  Gets a handle on the above sysfs entry with
				  sysfs_get_active
				  Blocks while trying to get cpufreq_rw_sem
				  in read mode
  Remove a sysfs entry for
  scaling_setspeed
    Blocks on sysfs_deactivate
    while waiting for earlier
    get_active (on other thread)
    to drain

At this point both threads go into deadlock and any other thread that tries to
do anything with sysfs cpufreq will also block.

There seems to be no easy way to avoid this deadlock as long as
cpufreq_userspace adds/removes the sysfs entry under same kobject as cpufreq.
Below patch moves scaling_setspeed to cpufreq.c, keeping it always and calling
back the governor on read/write. This is the cleanest fix I could think of,
even though adding two callbacks in governor structure just for this seems
unnecessary.

Note that the change makes scaling_setspeed under /sys/.../cpufreq permanent
and returns <unsupported> when governor is not userspace.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-02-06 22:57:58 -05:00
Fenghua Yu
e32d22f776 [CPUFREQ] fix incorrect comment on show_available_freqs() in freq_table.c
In freq_table.c, show_available_freqs()'s comment is oberviously wrong.
Change the comment to a new one to avoid confusion.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-02-06 22:57:58 -05:00
Joe Perches
a4a9df5825 [CPUFREQ] drivers/cpufreq: Add missing "space"
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2008-02-06 22:57:57 -05:00
Yi Yang
53391fa20c cpufreq: fix obvious condition statement error
The function __cpufreq_set_policy in file drivers/cpufreq/cpufreq.c
has a very obvious error:

        if (policy->min > data->min && policy->min > policy->max) {
                ret = -EINVAL;
                goto error_out;
        }

This condtion statement is wrong because it returns -EINVAL only if
policy->min is greater than policy->max (in this case,
"policy->min > data->min" is true for ever.). In fact, it should
return -EINVAL as well if policy->max is less than data->min.

The correct condition should be:

	if (policy->min > data->max || policy->max < data->min) {

The following test result testifies the above conclusion:

Before applying this patch:

[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
2394000 1596000
[root@yangyi-dev /]# echo 1596000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
1596000
[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
1596000
[root@yangyi-dev /]# echo "2000000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
-bash: echo: write error: Invalid argument
[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
1596000
[root@yangyi-dev /]# echo "0" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
1596000
[root@yangyi-dev /]# echo "1595000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
1596000
[root@yangyi-dev /]#

After applying this patch:

[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
2394000 1596000
[root@yangyi-dev /]# echo 1596000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
1596000
[root@yangyi-dev /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
1596000
[root@localhost /]# echo "2000000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
-bash: echo: write error: Invalid argument
[root@localhost /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
1596000
[root@localhost /]# echo "0" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
-bash: echo: write error: Invalid argument
[root@localhost /]# echo "1595000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
-bash: echo: write error: Invalid argument
[root@localhost /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
1596000
[root@localhost /]# echo "1596000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
[root@localhost /]# echo "2394000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
[root@localhost /]# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
2394000
[root@localhost /]

Signed-off-by: Yi Yang <yi.y.yang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:34 +01:00
Greg Kroah-Hartman
c10997f657 Kobject: convert drivers/* from kobject_unregister() to kobject_put()
There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:40 -08:00
Greg Kroah-Hartman
038c5b3e41 Kobject: change drivers/cpufreq/cpufreq.c to use kobject_init_and_add
Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Dominik Brodowski <linux@brodo.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Shin <jacob.shin@amd.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:28 -08:00