Commit Graph

35194 Commits

Author SHA1 Message Date
Andi Kleen
ddb25f9ac1 x86: don't disable TSC in any C states on AMD Fam10h
The ACPI code currently disables TSC use in any C2 and C3
states. But the AMD Fam10h BKDG documents that the TSC
will never stop in any C states when the CONSTANT_TSC bit is
set. Make this disabling conditional on CONSTANT_TSC
not set on AMD.

I actually think this is true on Intel too for C2 states
on CPUs with p-state invariant TSC, but this needs
further discussions with Len to really confirm :-)

So far it is only enabled on AMD.

Cc: lenb@kernel.org

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:41 +01:00
Andrew Morton
39657b6546 git-x86: drivers/pnp/pnpbios/bioscalls.c build fix
drivers/pnp/pnpbios/bioscalls.c:64: warning: (near initialization for 'bad_bios_desc.<anonymous>')

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:31 +01:00
Venki Pallipadi
bde6f5f59c x86: voluntary leave_mm before entering ACPI C3
Aviod TLB flush IPIs during C3 states by voluntary leave_mm()
before entering C3.

The performance impact of TLB flush on C3 should not be significant with
respect to C3 wakeup latency. Also, CPUs tend to flush TLB in hardware while in
C3 anyways.

On a 8 logical CPU system, running make -j2, the number of tlbflush IPIs goes
down from 40 per second to ~ 0. Total number of interrupts during the run
of this workload was ~1200 per second, which makes it ~3% savings in wakeups.

There was no measurable performance or power impact however.

[ akpm@linux-foundation.org: symbol export fixes. ]

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:01 +01:00
Parag Warudkar
79da472111 x86: fix DMI out of memory problems
People with HP Desktops (including me) encounter couple of DMI errors
during boot - dmi_save_oem_strings_devices: out of memory and
dmi_string: out of memory.

On some HP desktops the DMI data include OEM strings (type 11) out of
which only few are meaningful and most other are empty. DMI code
religiously creates copies of these 27 strings (65 bytes each in my
case) and goes OOM in dmi_string().

If DMI_MAX_DATA is bumped up a little then it goes and fails in
dmi_save_oem_strings while allocating dmi_devices of sizeof(struct
dmi_device) corresponding to these strings.

On x86_64 since we cannot use alloc_bootmem this early, the code uses a
static array of 2048 bytes (DMI_MAX_DATA) for allocating the memory DMI
needs. It does not survive the creation of empty strings and devices.

Fix this by detecting and not newly allocating empty strings and instead
using a one statically defined dmi_empty_string.

Also do not create a new struct dmi_device for each empty string - use
one statically define dmi_device with .name=dmi_empty_string and add
that to the dmi_devices list.

On x64 this should stop the OOM with same current size of DMI_MAX_DATA
and on x86 this should save a good amount of (27*65 bytes +
27*sizeof(struct dmi_device) bootmem.

Compile and boot tested on both 32-bit and 64-bit x86.

Signed-off-by: Parag Warudkar <parag.warudkar@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:59 +01:00
Glauber de Oliveira Costa
053de04441 x86: get rid of _MASK flags
There's no need for the *_MASK flags (TF_MASK, IF_MASK, etc), found in
processor.h (both _32 and _64). They have a one-to-one mapping with the
EFLAGS value. This patch removes the definitions, and use the already
existent X86_EFLAGS_ version when applicable.

[ roland@redhat.com: KVM build fixes. ]

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:27 +01:00
Ingo Molnar
41e191e85a x86: replace outb_p() with udelay(2) in drivers/input/mouse/pc110pad.c
replace outb_p() with udelay(2). This is a real ISA device so it likely
needs this particular delay.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:24 +01:00
Glauber de Oliveira Costa
6b68f01baa x86: unify struct desc_ptr
This patch unifies struct desc_ptr between i386 and x86_64.
They can be expressed in the exact same way in C code, only
having to change the name of one of them. As Xgt_desc_struct
is ugly and big, this is the one that goes away.

There's also a padding field in i386, but it is not really
needed in the C structure definition.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:12 +01:00
Ingo Molnar
5fd1fe9c58 x86: clean up drivers/char/rtc.c
tons of style cleanup in drivers/char/rtc.c - no code changed:

   text    data     bss     dec     hex filename
   6400     384      32    6816    1aa0 rtc.o.before
   6400     384      32    6816    1aa0 rtc.o.after

since we seem to have a number of open breakages in this code we might
as well start with making the code more readable and maintainable.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:09 +01:00
H. Peter Anvin
faca62273b x86: use generic register name in the thread and tss structures
This changes size-specific register names (eip/rip, esp/rsp, etc.) to
generic names in the thread and tss structures.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:02 +01:00
Thomas Gleixner
02456c708e x86: nuke a ton of dead hpet code
No users, just ballast

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 13:30:27 +01:00
Balaji Rao
37a47db8d7 x86: assign IRQs to HPET timers, fix
Looks like IRQ 31 is assigned to timer 3, even without the patch!
I wonder who wrote the number 31. But the manual says that it is
zero by default.

I think we should check whether the timer has been allocated an IRQ before
proceeding to assign one to it.  Here is a patch that does this.

Signed-off-by: Balaji Rao <balajirrao@gmail.com>
Tested-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:03 +01:00
Balaji Rao
e3f37a54f6 x86: assign IRQs to HPET timers
The userspace API for the HPET (see Documentation/hpet.txt) did not work. The
HPET_IE_ON ioctl was failing as there was no IRQ assigned to the timer
device. This patch fixes it by allocating IRQs to timer blocks in the HPET.

arch/x86/kernel/hpet.c |   13 +++++--------
drivers/char/hpet.c    |   45 ++++++++++++++++++++++++++++++++++++++-------
include/linux/hpet.h   |    2 +-
3 files changed, 44 insertions(+), 16 deletions(-)

Signed-off-by: Balaji Rao <balajirrao@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:03 +01:00
Linus Torvalds
5b10ca19ea Mostly revert "e1000/e1000e: Move PCI-Express device IDs over to e1000e"
The new e1000e driver is apparently not yet suitable for general use, so
mark it experimental, and re-instate all the PCI-Express device IDs in
the old and stable e1000 driver so that people (namely me) can continue
to use a driver that actually works.

Auke & co have been appraised of the situation.

Cc: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-30 09:54:54 +11:00
Jens Axboe
e7d9dc9cfd cciss: fix bug in overriding ->data_len before completion
For BLOCK_PC requests, we need that length for completing the request.
Andrew Vasquez <andrew.vasquez@qlogic.com> reported the following
oops

Hitting a consistent BUG() with recent Linus' linux-2.6.git:

	[   12.941428] ------------[ cut here ]------------
	[   12.944874] kernel BUG at drivers/block/cciss.c:1260!
	[   12.944874] invalid opcode: 0000 [1] SMP
	[   12.944874] CPU 0
	[   12.944874] Modules linked in:
	[   12.944874] Pid: 0, comm: swapper Not tainted 2.6.24 #43
	[   12.944874] RIP: 0010:[<ffffffff8039e43d>]  [<ffffffff8039e43d>] cciss_softirq_done+0xbc/0x1bf
	[   12.944874] RSP: 0018:ffffffff8063aed0  EFLAGS: 00010202
	[   12.944874] RAX: 0000000000000001 RBX: ffff8100cf800010 RCX: ffff81042f1253b0
	[   12.944874] RDX: ffff81042de398f0 RSI: ffff81042de398f0 RDI: 0000000000000001
	[   12.944874] RBP: ffff81042daa0000 R08: ffff81042f1253b0 R09: 0000000000000001
	[   12.944874] R10: 00000000000000fe R11: 0000000000000000 R12: 0000000000000002
	[   12.944874] R13: 0000000000000001 R14: ffff8100cf800000 R15: ffff81042de398f0
	[   12.944874] FS:  0000000000000000(0000) GS:ffffffff805bb000(0000) knlGS:0000000000000000
	[   12.944874] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
	[   12.944874] CR2: 00002afed7eea340 CR3: 000000042dbba000 CR4: 00000000000006e0
	[   12.944874] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
	[   12.944874] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
	[   12.944874] Process swapper (pid: 0, threadinfo ffffffff805f4000, task ffffffff805624a0)
	[   12.944874] Stack:  0000000000000000 ffffffff8063af10 0000000000000001 ffffffff80632d60
	[   12.944874]  0000000000000000 000000000000000a ffffffff805bb900 ffffffff8032038f
	[   12.944874]  ffffffff8063af10 ffffffff8063af10 ffffffff805bb940 ffffffff802346b4
	[   12.944874] Call Trace:
	[   12.944874]  <IRQ>  [<ffffffff8032038f>] blk_done_softirq+0x69/0x78
	[   12.944874]  [<ffffffff802346b4>] __do_softirq+0x6f/0xd8
	[   12.944874]  [<ffffffff8020c45c>] call_softirq+0x1c/0x30
	[   12.944874]  [<ffffffff8020e347>] do_softirq+0x30/0x80
	[   12.944874]  [<ffffffff8020e409>] do_IRQ+0x72/0xd9
	[   12.944874]  [<ffffffff8020a50a>] mwait_idle+0x0/0x46
	[   12.944874]  [<ffffffff8020a3da>] default_idle+0x0/0x3d
	[   12.944874]  [<ffffffff8020b7e1>] ret_from_intr+0x0/0xa
	[   12.944874]  <EOI>  [<ffffffff8020a54c>] mwait_idle+0x42/0x46
	[   12.944874]  [<ffffffff8020a481>] cpu_idle+0x6a/0xae
	[   12.944874]
	[   12.944874]
	[   12.944874] Code: 0f 0b eb fe 48 8d 85 d8 c0 00 00 48 89 04 24 48 89 c7 e8 e5
	[   12.944874] RIP  [<ffffffff8039e43d>] cciss_softirq_done+0xbc/0x1bf
	[   12.944874]  RSP <ffffffff8063aed0>
	[   12.944903] ---[ end trace e9c631603f90d22f ]---

which is caused by blk_end_request() returning 'not done' for a request,
since it gets asked to complete zero bytes.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-29 21:55:18 +01:00
Jens Axboe
9bf722598f xsysace: end request handling fix
In ace_fsm_dostate(), the variable 'i' was used only for passing
sector size of the request to end_that_request_first().
So I removed it and changed the code to pass the size in bytes
directly to __blk_end_request()

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-29 21:54:53 +01:00
Linus Torvalds
0ba6c33bcd Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.25
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.25: (1470 commits)
  [IPV6] ADDRLABEL: Fix double free on label deletion.
  [PPP]: Sparse warning fixes.
  [IPV4] fib_trie: remove unneeded NULL check
  [IPV4] fib_trie: More whitespace cleanup.
  [NET_SCHED]: Use nla_policy for attribute validation in ematches
  [NET_SCHED]: Use nla_policy for attribute validation in actions
  [NET_SCHED]: Use nla_policy for attribute validation in classifiers
  [NET_SCHED]: Use nla_policy for attribute validation in packet schedulers
  [NET_SCHED]: sch_api: introduce constant for rate table size
  [NET_SCHED]: Use typeful attribute parsing helpers
  [NET_SCHED]: Use typeful attribute construction helpers
  [NET_SCHED]: Use NLA_PUT_STRING for string dumping
  [NET_SCHED]: Use nla_nest_start/nla_nest_end
  [NET_SCHED]: Propagate nla_parse return value
  [NET_SCHED]: act_api: use PTR_ERR in tcf_action_init/tcf_action_get
  [NET_SCHED]: act_api: use nlmsg_parse
  [NET_SCHED]: act_api: fix netlink API conversion bug
  [NET_SCHED]: sch_netem: use nla_parse_nested_compat
  [NET_SCHED]: sch_atm: fix format string warning
  [NETNS]: Add namespace for ICMP replying code.
  ...
2008-01-29 22:54:01 +11:00
Stephen Hemminger
3c582b30bc [PPP]: Sparse warning fixes.
Fix a bunch of warnings in PPP and related drivers. Mostly because
sparse doesn't like it when the the function is only marked private in
the forward declaration.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:11:27 -08:00
Denis V. Lunev
f206351a50 [NETNS]: Add namespace parameter to ip_route_output_key.
Needed to propagate it down to the ip_route_output_flow.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:11:07 -08:00
Denis V. Lunev
f1b050bf7a [NETNS]: Add namespace parameter to ip_route_output_flow.
Needed to propagate it down to the __ip_route_output_key.

Signed_off_by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:11:06 -08:00
Denis V. Lunev
1ab352768f [NETNS]: Add namespace parameter to ip_dev_find.
in_dev_find() need a namespace to pass it to fib_get_table(), so add
an argument.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:11:04 -08:00
Bruno Randolf
c0e1899bdb ath5k: always extend rx timestamp with tsf
always extend the rx timestamp with the local TSF, since this information is
also needed for proper IBSS merging. this is done in the tasklet for now, maybe
has to be moved to the interrupt handler like in madwifi.

drivers/net/wireless/ath5k/base.c:      Changes-licensed-under: 3-Clause-BSD

Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:54 -08:00
Bruno Randolf
6d91e1d808 ath5k: configure backoff for IBSS beacon queue
in "11.1.2.2 Beacon generation in an IBSS" the IEEE802.11 standard says, each
STA should... "b) Calculate a random delay uniformly distributed in the range
between zero and twice aCWmin × aSlotTime,".

configure cwmin and cwmax of the beacon queue in IBSS mode according to this.
unfortunately beacon backoff does not work reliably yet, so i suspect we have a
problem somewhere else, since the same settings (and similar beacon timer
configuration) work for madwifi.

drivers/net/wireless/ath5k/base.c:      Changes-licensed-under: 3-Clause-BSD

Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:53 -08:00
Bruno Randolf
036cd1ec03 ath5k: use SWBA to detect IBSS HW merges
use SWBA (software beacon alert) interrupts to keep track of the next beacon
time und check if a HW merge (automatic TSF update) has happened on every
received beacon with the same BSSID.

this is necessary because the atheros hardware will silently update the local
TSF in IBSS mode, but not its beacon timers. if the TSF is ahead of the beacon
timers no beacons are sent until the timers wrap around (typically after about
1 minute).

this solution is not very nice, since we have to look into every beacon, but
there is apparently no other way to detect HW merges.

drivers/net/wireless/ath5k/base.c:      Changes-licensed-under: 3-Clause-BSD
drivers/net/wireless/ath5k/base.h:      Changes-licensed-under: 3-Clause-BSD

Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:52 -08:00
Bruno Randolf
9804b98d57 ath5k: better beacon timer calculation
update ath5k_beacon_update_timers() for better beacon timer calculation in a
variety of situations. most important is the possibility to call it with the
timestamp of a received beacon, when we detected that a HW merge has happened
and we need to reconfigure the beacon timers based on that.

we call this from the mac80211 callback reset_tsf now instead of beacon_update,
and there will be more use of it in the next patch.

drivers/net/wireless/ath5k/base.c:      Changes-licensed-under: 3-Clause-BSD

Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:51 -08:00
Bruno Randolf
e535c1ac7e ath5k: beacon interval is in TU
the beacon interval is passed by mac80211 in TU already, so we can directly use
it without conversion. also update the comments about TU (1 TU is defined by
802.11 as 1024usec).

drivers/net/wireless/ath5k/ath5k.h:     Changes-licensed-under: ISC
drivers/net/wireless/ath5k/base.c:      Changes-licensed-under: 3-Clause-BSD
drivers/net/wireless/ath5k/base.h:      Changes-licensed-under: 3-Clause-BSD

Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:50 -08:00
Bruno Randolf
1008e0f7b9 ath5k: use 3 instead of 0x00000003
reviewed beacon timer initialization with register traces from madwifi: what we
are doing is correct :). one minor fix: use 3 instead of 0x00000003 - it's more
readable.

drivers/net/wireless/ath5k/hw.c:        Changes-licensed-under: ISC

Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:50 -08:00
Michael Buesch
1f7d87b0ec b43: Fix MAC control and microcode init
This zeros out all microcode related memory before loading
the microcode.

This also fixes initialization of the MAC control register.
The _only_ place where we overwrite the contents of the MAC control
register is at the beginning of b43_chip_init().
All other places must do read() -> mask/set -> write() to not
overwrite existing bits.

This also adds a longer delay for waiting for the microcode
to initialize itself. It seems that the current timeout is sufficient
on all available devices, but there's no real reason why we shouldn't
wait for up to one second. Slow embedded devices might exist.
Better safe than sorry.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:49 -08:00
John W. Linville
247ae44920 ath5k: reset key cache after resume
Otherwise it may be impossible to connected to an open network after a
resume.

This is a modified version of an original patch by
Alex Eskin <alexeskin@yahoo.com>:

	https://bugzilla.redhat.com/show_bug.cgi?id=425950#c8

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:48 -08:00
John W. Linville
c65638a72c ath5k: use AR5K_KEYTABLE_SIZE when initializing key table
...instead of using AR5K_KEYCACHE_SIZE, which would seem to be a
typo/thinko...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:47 -08:00
Michael Buesch
61cb5dd6d1 b43: Fix firmware caching
We must also store the ID string (filename) for the cached firmware blobs
and verify that we really have the right firmware cached before using it.
If we don't have the right fw cached, we must free it and request the
correct blobs.

This fixes bandswitch on A/B/G multi-PHY devices.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:46 -08:00
Michael Buesch
95b66bad55 b43: Add more N-PHY init code
This also adds lots of TODOs. Oh well. Lots of work. :)

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:44 -08:00
Michael Buesch
bfe6a50156 b43legacy: Remove the PHY spinlock
This fixes a sparse warning about weird locking.
The spinlock is not needed, so simply remove it.
This also adds some sanity checks to the PHY and radio locking
to protect against recursive locking.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:42 -08:00
Auke Kok
9d5c824399 igb: PCI-Express 82575 Gigabit Ethernet driver
We are pleased to announce a new Gigabit Ethernet product and its
driver to the linux community. This product is the Intel(R) 82575
Gigabit Ethernet adapter family. Physical adapters will be available
to the public soon. These adapters come in 2- and 4-port versions
(copper PHY) currently. Other variants will be available later.

The 82575 chipset supports significantly different features that
warrant a new driver. The descriptor format is (just like the
ixgbe driver) different. The device can use multiple MSI-X vectors
and multiple queues for both send and receive. This allows us to
optimize some of the driver code specifically as well compared to
the e1000-supported devices.

This version of the igb driver no lnger uses fake netdevices and
incorporates napi_struct members for each ring to do the multi-
queue polling. multi-queue is enabled by default and the driver
supports NAPI mode only.

All the namespace collisions should be gone in this version too. The
register macro's have been condensed to improve readability.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:33 -08:00
Al Viro
b491edd581 bnx2 annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:10:32 -08:00
Al Viro
f305f789bb annotate netxen
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:10:31 -08:00
Al Viro
66341fffd4 annotate myri10ge
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:10:31 -08:00
Al Viro
05e5c11653 annotate cxgb3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:10:30 -08:00
Al Viro
ac390c60a8 annotate chelsio
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:10:29 -08:00
Michael Chan
583c28e564 [BNX2]: Fix driver phy_flags name space.
Prefix "bp->phy_flags" names with BNX2_PHY_FLAG_* for consistency.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:23 -08:00
David S. Miller
f86e82fb54 [BNX2]: Fix driver software flag namespace.
Prefix "bnx2->flags" names with BNX2_* for consistency.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:16 -08:00
Michael Chan
feebb33183 [BNX2] Update version to 1.7.2.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:16 -08:00
Michael Chan
b2fadeae13 [BNX2]: Add link-down workaround on 5706 serdes.
In some blade systems using the 5706 serdes, the hardware sometimes
does not properly generate link down interrupts.  We add a workaround
in the driver's timer to force a link-down when some PHY registers
report loss of SYNC.

The parallel detect logic is cleaned up slightly to better integrate
the workaround.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:15 -08:00
Michael Chan
1097f5e921 [BNX2]: Fix minor bug in bnx2_has_work().
It is more correct to get the status block from the bnx2_napi struct
instead of the bnx2 struct.  It happens that they are the same in this
case because we are using the first MSIX vector.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:14 -08:00
Michael Chan
2dd201d7b7 [BNX2]: Disable jumbo rx paging on 5709 Ax.
The chip has problem running in this mode and needs to be disabled.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:13 -08:00
John W. Linville
819d772b0c b43/nphy.c: include headers to avoid build breakage on some platforms
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:13 -08:00
Andrew Morton
73738001ac drivers/net/wireless/rt2x00/rt2x00usb.c: fix uninitialized var warning
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:12 -08:00
Andrew Morton
d2594d07ab drivers/net/wireless/iwlwifi/iwl-3945.c: fix printk warning
drivers/net/wireless/iwlwifi/iwl-3945.c: In function 'iwl3945_add_radiotap':
drivers/net/wireless/iwlwifi/iwl-3945.c:269: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:11 -08:00
Stefano Brivio
222b01b7fe b43legacy: fix use-after-free rfkill bug
Fix rfkill code which caused a use-after-free bug. Thanks to David
Woodhouse for spotting this out.

Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:10 -08:00
Holger Schurig
61d30020dc libertas: pepper main with debug statement
libertas: re-pepper debug statementThe recent fluff of updates
didn't put proper lbs_deb_enter/leave calls into the source code.
Add them where appropriate.

Also contains some whitespace changes.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:07 -08:00
Holger Schurig
c9d1be3619 libertas: don't blindly try mesh
The CF card only has a very old firmware (5.0.16p0). This firmware doesn't
know anything about mesh config. However, current code blindly calls
mesh_config when the card is inserted. So check the firmware version before
issuing this command.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:06 -08:00