Commit Graph

295 Commits

Author SHA1 Message Date
Ingo Molnar
6d5b43a67a Merge branch 'tip/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/urgent 2008-11-19 09:00:50 +01:00
Steven Rostedt
32464779a1 ftrace: fix dyn ftrace filter selection
Impact: clean up and fix for dyn ftrace filter selection

The previous logic of the dynamic ftrace selection of enabling
or disabling functions was complex and incorrect. This patch simplifies
the code and corrects the usage. This simplification also makes the
code more robust.

Here is the correct logic:

  Given a function that can be traced by dynamic ftrace:

  If the function is not to be traced, disable it if it was enabled.
  (this is if the function is in the set_ftrace_notrace file)

  (filter is on if there exists any functions in set_ftrace_filter file)

  If the filter is on, and we are enabling functions:
    If the function is in set_ftrace_filter, enable it if it is not
      already enabled.
    If the function is not in set_ftrace_filter, disable it if it is not
      already disabled.

  Otherwise, if the filter is off and we are enabling function tracing:
    Enable the function if it is not already enabled.

  Otherwise, if we are disabling function tracing:
    Disable the function if it is not already disabled.

This code now sets or clears the ENABLED flag in the record, and at the
end it will enable the function if the flag is set, or disable the function
if the flag is cleared.

The parameters for the function that does the above logic is also
simplified. Instead of passing in confusing "new" and "old" where
they might be swapped if the "enabled" flag is not set. The old logic
even had one of the above always NULL and had to be filled in. The new
logic simply passes in one parameter called "nop". A "call" is calculated
in the code, and at the end of the logic, when we know we need to either
disable or enable the function, we can then use the "nop" and "call"
properly.

This code is more robust than the previous version.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:19:47 -05:00
Steven Rostedt
8204327831 ftrace: make filtered functions effective on setting
Impact: fix filter selection to apply when set

It can be confusing when the set_filter_functions is set (or cleared)
and the functions being recorded by the dynamic tracer does not
match.

This patch causes the code to be updated if the function tracer is
enabled and the filter is changed.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:18:54 -05:00
Steven Rostedt
f10ed36ec1 ftrace: fix set_ftrace_filter
Impact: fix of output of set_ftrace_filter

The commit "ftrace: do not show freed records in
             available_filter_functions"

Removed a bit too much from the set_ftrace_filter code, where we now see
all functions in the set_ftrace_filter file even when we set a filter.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-19 00:17:45 -05:00
Vegard Nossum
641d2f63cf trace: introduce missing mutex_unlock()
Impact: fix tracing buffer mutex leak in case of allocation failure

This error was spotted by this semantic patch:

  http://www.emn.fr/x-info/coccinelle/mut.html

It looks correct as far as I can tell. Please review.

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-18 21:37:15 +01:00
Julia Lawall
0bb943c7a2 tracing: kernel/trace/trace.c: introduce missing kfree()
Impact: fix memory leak

Error handling code following a kzalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,l;
position p1,p2;
expression *ptr != NULL;
@@

(
if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S
|
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
)
<... when != x
     when != if (...) { <+...x...+> }
x->f = E
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-18 16:59:58 +01:00
walimis
5821e1b74f function tracing: fix wrong pos computing when read buffer has been fulfilled
Impact: make output of available_filter_functions complete

phenomenon:

The first value of dyn_ftrace_total_info is not equal with
`cat available_filter_functions | wc -l`, but they should be equal.

root cause:

When printing functions with seq_printf in t_show, if the read buffer
is just overflowed by current function record, then this function
won't be printed to user space through read buffer, it will
just be dropped. So we can't see this function printing.

So, every time the last function to fill the read buffer, if overflowed,
will be dropped.

This also applies to set_ftrace_filter if set_ftrace_filter has
more bytes than read buffer.

fix:

Through checking return value of seq_printf, if less than 0, we know
this function doesn't be printed. Then we decrease position to force
this function to be printed next time, in next read buffer.

Another little fix is to show correct allocating pages count.

Signed-off-by: walimis <walimisdev@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16 08:32:05 +01:00
Ingo Molnar
ee51a1de7e tracing: fix mmiotrace resizing crash
Pekka reported a crash when resizing the mmiotrace tracer (if only
mmiotrace is enabled).

This happens because in that case we do not allocate the max buffer,
but we try to use it.

Make ring_buffer_resize() idempotent against NULL buffers.

Reported-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-13 14:58:31 +01:00
Steven Rostedt
47e74f2ba8 ring-buffer: no preempt for sched_clock()
Impact: disable preemption when calling sched_clock()

The ring_buffer_time_stamp still uses sched_clock as its counter.
But it is a bug to call it with preemption enabled. This requirement
should not be pushed to the ring_buffer_time_stamp callers, so
the ring_buffer_time_stamp needs to disable preemption when calling
sched_clock.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-12 11:23:36 +01:00
Ingo Molnar
c1e7abbc7a Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/urgent 2008-11-11 21:34:07 +01:00
Steven Rostedt
a358324466 ring-buffer: buffer record on/off switch
Impact: enable/disable ring buffer recording API added

Several kernel developers have requested that there be a way to stop
recording into the ring buffers with a simple switch that can also
be enabled from userspace. This patch addes a new kernel API to the
ring buffers called:

 tracing_on()
 tracing_off()

When tracing_off() is called, all ring buffers will not be able to record
into their buffers.

tracing_on() will enable the ring buffers again.

These two act like an on/off switch. That is, there is no counting of the
number of times tracing_off or tracing_on has been called.

A new file is added to the debugfs/tracing directory called

  tracing_on

This allows for userspace applications to also flip the switch.

  echo 0 > debugfs/tracing/tracing_on

disables the tracing.

  echo 1 > /debugfs/tracing/tracing_on

enables it.

Note, this does not disable or enable any tracers. It only sets or clears
a flag that needs to be set in order for the ring buffers to write to
their buffers. It is a global flag, and affects all ring buffers.

The buffers start out with tracing_on enabled.

There are now three flags that control recording into the buffers:

 tracing_on: which affects all ring buffer tracers.

 buffer->record_disabled: which affects an allocated buffer, which may be set
     if an anomaly is detected, and tracing is disabled.

 cpu_buffer->record_disabled: which is set by tracing_stop() or if an
     anomaly is detected. tracing_start can not reenable this if
     an anomaly occurred.

The userspace debugfs/tracing/tracing_enabled is implemented with
tracing_stop() but the user space code can not enable it if the kernel
called tracing_stop().

Userspace can enable the tracing_on even if the kernel disabled it.
It is just a switch used to stop tracing if a condition was hit.
tracing_on is not for protecting critical areas in the kernel nor is
it for stopping tracing if an anomaly occurred. This is because userspace
can reenable it at any time.

Side effect: With this patch, I discovered a dead variable in ftrace.c
  called tracing_on. This patch removes it.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2008-11-11 15:02:04 -05:00
Ingo Molnar
45b86a96f1 Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/urgent 2008-11-11 09:16:20 +01:00
Steven Rostedt
4143c5cb36 ring-buffer: prevent infinite looping on time stamping
Impact: removal of unnecessary looping

The lockless part of the ring buffer allows for reentry into the code
from interrupts. A timestamp is taken, a test is preformed and if it
detects that an interrupt occurred that did tracing, it tries again.

The problem arises if the timestamp code itself causes a trace.
The detection will detect this and loop again. The difference between
this and an interrupt doing tracing, is that this will fail every time,
and cause an infinite loop.

Currently, we test if the loop happens 1000 times, and if so, it will
produce a warning and disable the ring buffer.

The problem with this approach is that it makes it difficult to perform
some types of tracing (tracing the timestamp code itself).

Each trace entry has a delta timestamp from the previous entry.
If a trace entry is reserved but and interrupt occurs and traces before
the previous entry is commited, the delta timestamp for that entry will
be zero. This actually makes sense in terms of tracing, because the
interrupt entry happened before the preempted entry was commited, so
one may consider the two happening at the same time. The order is
still preserved in the buffer.

With this idea, instead of trying to get a new timestamp if an interrupt
made it in between the timestamp and the test, the entry could simply
make the delta zero and continue. This will prevent interrupts or
tracers in the timer code from causing the above loop.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2008-11-10 21:47:37 -05:00
Steven Rostedt
bf5e6519b8 ftrace: disable tracing on resize
Impact: fix for bug on resize

This patch addresses the bug found here:

 http://bugzilla.kernel.org/show_bug.cgi?id=11996

When ftrace converted to the new unified trace buffer, the resizing of
the buffer was not protected as much as it was originally. If tracing
is performed while the resize occurs, then the buffer can be corrupted.

This patch disables all ftrace buffer modifications before a resize
takes place.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2008-11-10 21:47:35 -05:00
Eric Anholt
072ba49838 ftrace: fix breakage in bin_fmt results
In 777e208d40 we changed from outputting
field->cpu (a char) to iter->cpu (unsigned int), increasing the resulting
structure size by 3 bytes.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-05 10:22:42 +01:00
Steven Rostedt
818e3dd30a tracing, ring-buffer: add paranoid checks for loops
While writing a new tracer, I had a bug where I caused the ring-buffer
to recurse in a bad way. The bug was with the tracer I was writing
and not the ring-buffer itself. But it took a long time to find the
problem.

This patch adds paranoid checks into the ring-buffer infrastructure
that will catch bugs of this nature.

Note: I put the bug back in the tracer and this patch showed the error
      nicely and prevented the lockup.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-03 11:10:04 +01:00
Steven Rostedt
b3aa557722 ftrace: use kretprobe trampoline name to test in output
Impact: ia64+tracing build fix

When a function is kprobed, the return address is set to the
kprobe_trampoline, or something similar. This caused the output
of the trace to look confusing when the parent seemed to be this
"kprobe_trampoline" function.

To fix this, Abhishek Sagar added a test of the instruction pointer
of the parent to see if it matched the kprobe_trampoline. If it
did, the output would print a "[unknown/kretprobe'd]" instead.

Unfortunately, not all archs do this the same way, and the trampoline
function may not be exported, which causes failures in builds.

This patch will compare the name instead of the pointer to see
if it matches. This prevents us from depending on a function from
being exported, and should work on all archs. The worst that can
happen is that an arch might use a different name and then we
go back to the confusing output. At least the arch will still build.

Reported-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Acked-by: Abhishek Sagar <sagar.abhishek@gmail.com>
2008-11-03 10:41:29 +01:00
Al Viro
c2c8052946 tracing, alpha: undefined reference to `save_stack_trace'
Impact: build fix on !stacktrace architectures

only select STACKTRACE on architectures that have STACKTRACE_SUPPORT

... since we also need to ifdef out the guts of ftrace_trace_stack().
We also want to disallow setting TRACE_ITER_STACKTRACE in trace_flags
on such configs, but that can wait.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-03 10:12:13 +01:00
Steven Rostedt
9244489a7b ftrace: handle archs that do not support irqs_disabled_flags
Impact: build fix on non-lockdep architectures

Some architectures do not support a way to read the irq flags that
is set from "local_irq_save(flags)" to determine if interrupts were
disabled or enabled. Ftrace uses this information to display to the user
if the trace occurred with interrupts enabled or disabled.

Besides the fact that those archs that do not support this will fail to
compile, unless they fix it, we do not want to have the trace simply
say interrupts were not disabled or they were enabled, without knowing
the real answer.

This patch adds a 'X' in the output to let the user know that the
architecture they are running on does not support a way for the tracer
to determine if interrupts were enabled or disabled. It also lets those
same archs compile with tracing enabled.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 00:03:26 +01:00
Steven Rostedt
f3384b28a0 ftrace: fix trace_nop config select
Impact: build fix on non-function-tracing architectures

The trace_nop is the tracer that is defined when no tracer is set in
the ftrace infrastructure.

The trace_nop was mistakenly selected by HAVE_FTRACE due to the confusion
between ftrace infrastructure and the ftrace function tracer (which has
been solved by renaming the function tracer).

This patch changes the select to the approriate TRACING.

This patch should fix compile errors on architectures that do not define
the FUNCTION_TRACER.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-29 17:21:05 +01:00
Frederic Weisbecker
0b6e4d56bf ftrace: perform an initialization for ftrace to enable it
Impact: corrects a bug which made the non-dyn function tracer not functional

With latest git, the non-dynamic function tracer didn't get any trace.

The problem was the fact that ftrace_enabled wasn't initialized to 1
because ftrace hasn't any init function when DYNAMIC_FTRACE is disabled.

So when a tracer tries to register an ftrace_ops struct,
__register_ftrace_function failed to set the hook.

This patch corrects it by setting an init function to initialize
ftrace during the boot.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-28 19:15:58 +01:00
Steven Rostedt
60063a6623 ftrace: fix current_tracer error return
The commit (in linux-tip) c2931e05ec
 ( ftrace: return an error when setting a nonexistent tracer )
added useful code that would error when a bad tracer was written into
the current_tracer file.

But this had a bug if the amount written was more than the amount read by
that code. The first iteration would set the tracer correctly, but since
it did not consume the rest of what was written (usually whitespace), the
userspace utility would continue to write what was not consumed. This
second iteration would fail to find a tracer and return -EINVAL. Funny
thing is that the tracer would have already been set.

This patch just consumes all the data that is written to the file.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-28 16:33:47 +01:00
Frederic Weisbecker
21798a84ab tracing: fix a build error on alpha
Impact: build fix on Alpha

When tracing is enabled, some arch have included <linux/irqflags.h>
on their <asm/system.h> but others like alpha or m68k don't.

Build error on alpha:

kernel/trace/trace.c: In function 'tracing_cpumask_write':
kernel/trace/trace.c:2145: error: implicit declaration of function 'raw_local_irq_disable'
kernel/trace/trace.c:2162: error: implicit declaration of function 'raw_local_irq_enable'

Tested on Alpha through a cross-compiler (should correct a similar issue on m68k).

Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-28 09:53:28 +01:00
Frederic Weisbecker
ea31e72d75 tracing/ftrace: make boot tracer select the sched_switch tracer
Impact: build fix

If the boot tracer is selected but not the sched_switch,
there will be a build failure:

 kernel/built-in.o: In function `boot_trace_init':
 trace_boot.c:(.text+0x5ee38): undefined reference to `sched_switch_trace'
 kernel/built-in.o: In function `disable_boot_trace':
 (.text+0x5eee1): undefined reference to `tracing_stop_cmdline_record'
 kernel/built-in.o: In function `enable_boot_trace':
 (.text+0x5ef11): undefined reference to `tracing_start_cmdline_record'

This patch fixes it.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-27 16:47:13 +01:00
Stephen Rothwell
e2862c9470 trace: fix printk warning for u64
A powerpc ppc64_defconfig build produces these warnings:

kernel/trace/ring_buffer.c: In function 'rb_add_time_stamp':
kernel/trace/ring_buffer.c:969: warning: format '%llu' expects type 'long long unsigned int', but argument 2 has type 'u64'
kernel/trace/ring_buffer.c:969: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'u64'
kernel/trace/ring_buffer.c:969: warning: format '%llu' expects type 'long long unsigned int', but argument 4 has type 'u64'

Just cast the u64s to unsigned long long like we do everywhere else.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-27 11:31:58 +01:00
Ingo Molnar
f17845e5d9 ftrace: warning in kernel/trace/ftrace.c
this warning:

  kernel/trace/ftrace.c:189: warning: ‘frozen_record_count’ defined but not used

triggers because frozen_record_count is only used in the KCONFIG_MARKERS
case. Move the variable it there.

Alas, this frozen-record facility seems to have little use. The
frozen_record_count variable is not used by anything, nor the flags.

So this section might need a bit of dead-code-removal care as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-24 12:52:44 +02:00
Ingo Molnar
66b0de3569 ftrace: fix build failure
fix:

 kernel/trace/ftrace.c: In function 'ftrace_release':
 kernel/trace/ftrace.c:271: error: implicit declaration of function 'ftrace_release_hash'

release_hash is not needed without dftraced.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23 16:11:03 +02:00
Steven Rostedt
08f5ac906d ftrace: remove ftrace hash
The ftrace hash was used by the ftrace_daemon code. The record ip function
would place the calling address (ip) into the hash. The daemon would later
read the hash and modify that code.

The hash complicates the code. This patch removes it.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23 16:00:24 +02:00
Steven Rostedt
4d296c2432 ftrace: remove mcount set
The arch dependent function ftrace_mcount_set was only used by the daemon
start up code. This patch removes it.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23 16:00:23 +02:00
Steven Rostedt
cb7be3b2fc ftrace: remove daemon
The ftrace daemon is complex and error prone.  This patch strips it out
of the code.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23 16:00:22 +02:00
Steven Rostedt
6912896e99 ftrace: add ftrace warn on to disable ftrace
Add ftrace warn on to disable ftrace as well as report a warning.

[ Thanks to Andrew Morton for suggesting using the WARN_ON return value ]

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23 16:00:20 +02:00
Steven Rostedt
81adbdc029 ftrace: only have ftrace_kill atomic
When an anomaly is detected, we need a way to completely disable
ftrace. Right now we have two functions: ftrace_kill and ftrace_kill_atomic.
The ftrace_kill tries to do it in a "nice" way by converting everything
back to a nop.

The "nice" way is dangerous itself, so this patch removes it and only
has the "atomic" version, which is all that is needed.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23 16:00:19 +02:00
Steven Rostedt
593eb8a2d6 ftrace: return error on failed modified text.
Have the ftrace_modify_code return error values:

  -EFAULT on error of reading the address

  -EINVAL if what is read does not match what it expected

  -EPERM  if the write fails to update after a successful match.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23 16:00:13 +02:00
Steven Rostedt
6ae2a0765a ring-buffer: fix free page
The pages of a buffer was originally pointing to the page struct, it
now points to the page address. The freeing of the page still uses
the page frame free "__free_page" instead of the correct free_page to
the address.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-22 17:02:09 +02:00
Peter Zijlstra
17d80fd07d tracing: create tracers menu
We seem to have plenty tracers, lets create a menu and not clutter
the already cluttered debug menu more.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-22 09:08:56 +02:00
Steven Rostedt
81520a1b06 ftrace: stack tracer only record when on stack
The stack trace API does not record if the stack is not on the current
task's stack. That is, if the stack is the interrupt stack or NMI stack,
the output does not show. Also, the size of those stacks are not
consistent with the size of the thread stack, this makes the calculation
of the stack size usually bogus.

This all confuses the stack tracer. I unfortunately do not have time to
fix all these problems, but this patch does record the worst stack when
the stack pointer is on the tasks stack (instead of bogus numbers).

The patch simply returns if the stack pointer is not on the task's stack.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20 18:31:37 +02:00
Steven Rostedt
3ce83aea86 ftrace: rename the ftrace tracer to function
To avoid further confusion between the ftrace infrastructure and the
function tracer. This patch renames the "ftrace" function tracer
to "function".

Now in available_tracers, instead of "ftrace" there will be "function".

This makes more sense, since people will not know exactly what the
"ftrace" tracer does.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20 18:27:04 +02:00
Steven Rostedt
606576ce81 ftrace: rename FTRACE to FUNCTION_TRACER
Due to confusion between the ftrace infrastructure and the gcc profiling
tracer "ftrace", this patch renames the config options from FTRACE to
FUNCTION_TRACER.  The other two names that are offspring from FTRACE
DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same.

This patch was generated mostly by script, and partially by hand.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20 18:27:03 +02:00
Steven Rostedt
c2db8054c1 ftrace: fix depends
A lot of tracers have HAVE_FTRACE as a dependent config where it
really should not. The HAVE_FTRACE is a misnomer (soon to be fixed)
and describes if the architecture has the function tracer (mcount)
implemented. The ftrace infrastructure is implemented in all archs.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20 18:27:02 +02:00
Steven Rostedt
bd95b88d9e ftrace: release functions from hash
The x86 architecture uses a static recording of mcount caller locations
and is not affected by this patch.

For architectures still using the dynamic ftrace daemon, this patch is
critical. It removes the race between the recording of a function that
calls mcount, the unloading of a module, and the ftrace daemon updating
the call sites.

This patch adds the releasing of the hash functions that the daemon uses
to update the mcount call sites. When a module is unloaded, not only
are the replaced call site table update, but now so is the hash recorded
functions that the ftrace daemon will use.

Again, architectures that implement MCOUNT_RECORD are not affected by
this (which currently only x86 has).

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20 18:27:01 +02:00
Ingo Molnar
98d9c66ab0 tracing/fastboot: improve help text
Improve the help text of the boot tracer.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 14:27:20 +02:00
Ingo Molnar
4519d9e54d tracing/stacktrace: improve help text
Improve the help text that is displayed for CONFIG_STACK_TRACER.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 14:15:43 +02:00
Harvey Harrison
ad0a3b6811 trace: add build-time check to avoid overrunning hex buffer
Remove the runtime BUG_ON and change to a compile-time check in
the macro that calls the hex format routine

[Noticed by Joe Perches]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:39:26 +02:00
Harvey Harrison
2fbc474901 ftrace: fix hex output mode of ftrace
Fix the output of ftrace in hex mode as the hi/lo nibbles are output in
reverse order. Without this patch, the output of ftrace is:

raw mode : 6474 0 141531612444 0 140 + 6402 120 S
hex mode : 000091a4 00000000 000000023f1f50c1 00000000 c8 000000b2 00009120 87 ffff00c8 00000035

There is an inversion on ouput hex(6474) is 194a

[based on a patch by Philippe Reynes <tremyfr@yahoo.fr>]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:39:25 +02:00
Arjan van de Ven
8a5d900cca tracing/fastboot: fix printk format typo in boot tracer
When printing nanoseconds, the right printk format string is %09 not %06...

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:39:23 +02:00
Frederic Weisbecker
c2931e05ec ftrace: return an error when setting a nonexistent tracer
When one try to set a nonexistent tracer, no error is returned
as if the name of the tracer was correct.
We should return -EINVAL.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:39:22 +02:00
Steven Rostedt
3ea2e6d71a ftrace: make some tracers reentrant
Now that the ring buffer is reentrant, some of the ftrace tracers
(sched_swich, debugging traces) can also be reentrant.

Note: Never make the function tracer reentrant, that can cause
  recursion problems all over the kernel. The function tracer
  must disable reentrancy.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:39:20 +02:00
Steven Rostedt
bf41a158ca ring-buffer: make reentrant
This patch replaces the local_irq_save/restore with preempt_disable/
enable. This allows for interrupts to enter while recording.
To write to the ring buffer, you must reserve data, and then
commit it. During this time, an interrupt may call a trace function
that will also record into the buffer before the commit is made.

The interrupt will reserve its entry after the first entry, even
though the first entry did not finish yet.

The time stamp delta of the interrupt entry will be zero, since
in the view of the trace, the interrupt happened during the
first field anyway.

Locking still takes place when the tail/write moves from one page
to the next. The reader always takes the locks.

A new page pointer is added, called the commit. The write/tail will
always point to the end of all entries. The commit field will
point to the last committed entry. Only this commit entry may
update the write time stamp.

The reader can only go up to the commit. It cannot go past it.

If a lot of interrupts come in during a commit that fills up the
buffer, and it happens to make it all the way around the buffer
back to the commit, then a warning is printed and new events will
be dropped.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:39:19 +02:00
Steven Rostedt
6f807acd27 ring-buffer: move page indexes into page headers
Remove the global head and tail indexes and move them into the
page header. Each page will now keep track of where the last
write and read was made. We also rename the head and tail to read
and write for better clarification.

This patch is needed for future enhancements to move the ring buffer
to a lockless solution.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:39:18 +02:00
Frederic Weisbecker
097d036a2f tracing/fastboot: only trace non-module initcalls
At this time, only built-in initcalls interest us.
We can't really produce a relevant graph if we include
the modules initcall too.

I had good results after this patch (see svg in attachment).

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-14 10:39:17 +02:00