Commit Graph

34 Commits

Author SHA1 Message Date
Benjamin Herrenschmidt
6dfbde2091 [POWERPC] Add function to check if address is an IO port
This adds a function that tells you if a given kernel virtual address
is hitting a PCI or ISA IO port permanent mapping or not. This is to
be used in the next patch to fix iomap APIs to properly unmap things.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:17:47 +10:00
Kumar Gala
f64fddbeac [POWERPC] Provide ability to setup P2P bridge registers from struct resource
We need the ability to set P2P bridge registers to properly setup the virtual
P2P bridges that exist in PCIe controllers for some of the embedded setups.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 22:30:08 -05:00
Kumar Gala
2e56ff206b [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime
Make it so we do a runtime check to know if we need to write cfg_addr
as big or little endian.  This is needed if we want to allow 86xx support
to co-exist in the same kernel as other 6xx PPCs.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 22:29:09 -05:00
Kumar Gala
d5269966e5 [POWERPC] Removed setup_indirect_pci_nomap
We don't use setup_indirect_pci_nomap in arch/powerpc and it appears
the users that needed it from arch/ppc are now using setup_indirect_pci.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 10:27:08 -05:00
Kumar Gala
62c66c8e55 [POWERPC] Added indirect quirk to handle PCIe PHB that have issue w/no link
Added PPC_INDIRECT_TYPE_NO_PCIE_LINK flag to the indirect pci handling
code to ensure that we don't talk to any device other than the PHB
if we don't have PCIe link.  Some controllers will lockup if they try
to do a config cycle to any device on the bus except the PHB.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 10:27:07 -05:00
Kumar Gala
38805e5f09 [POWERPC] Add the ability to find PCI capabilities early on
Added early_find_capability that wraps pci_bus_find_capability and uses
fake_pci_bus() to allow us to call it before we've fully setup the
pci_controller.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 10:27:07 -05:00
Kumar Gala
a4c9e32827 [POWERPC] Use ppc64 style list management for pci_controller on ppc32
Use the ppc64 style list management and allocation functions for
pci_controllers.  This makes the pci_controller structs just a bit more
common between ppc32 & ppc64.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:45 -05:00
Kumar Gala
0b1d40c4d4 [POWERPC] Move pci_bus_to_hose users to pci_bus_to_host
In the places we can move to using pci_bus_to_host, this allows us
to make pci_bus_to_host static and remove its export.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:42 -05:00
Kumar Gala
dbf8471f52 [POWERPC] Merge ppc32 and ppc64 pcibios_alloc_controller() prototypes
Make the ppc32 pcibios_alloc_controller take a device node to match
the ppc64 prototypes and have it set arch_data.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:39 -05:00
Kumar Gala
5516b540e9 [POWERPC] Use global_number in ppc32 pci_controller
Make the pci_controller struct use global_number for the PHB domain number
instead of index to match what ppc64 does and reuse its pci_domain_nr code.

Introduced a pci-common.c to handle shared code between ppc32 & ppc64.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:37 -05:00
Kumar Gala
6a506238b3 [POWERPC] Removed dead code related to PCI on ppc32
There are no in kernel users of any off these functions and some of
them were not even EXPORT_SYMBOL:

- pci_bus_io_base()
- pci_bus_io_base_phys()
- pci_bus_mem_base_phys()
- pci_resource_to_bus()
- phys_to_bus()
- pci_phys_to_bus()
- pci_bus_to_phys()
- pci_init_resource()
- resource_fixup()

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:35 -05:00
Kumar Gala
bf440b712d [POWERPC] Remove local_number from pci_controller
We never actually read local_number so lets just remove it.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:34 -05:00
Kumar Gala
5531e41bf4 [POWERPC] Merge asm-ppc/pci-bridge.h into asm-power/pci-bridge.h
Moved bits need for ppc32 from asm-ppc/pci-bridge.h into
asm-powerpc/pci-bridge.h.

Removed ARCH=powerpc specific bits (and comments related to ARCH=ppc)
from asm-ppc/pci-bridge.h as its only used on ARCH=ppc.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-29 01:58:31 -05:00
Benjamin Herrenschmidt
3d5134ee83 [POWERPC] Rewrite IO allocation & mapping on powerpc64
This rewrites pretty much from scratch the handling of MMIO and PIO
space allocations on powerpc64.  The main goals are:

 - Get rid of imalloc and use more common code where possible
 - Simplify the current mess so that PIO space is allocated and
   mapped in a single place for PCI bridges
 - Handle allocation constraints of PIO for all bridges including
   hot plugged ones within the 2GB space reserved for IO ports,
   so that devices on hotplugged busses will now work with drivers
   that assume IO ports fit in an int.
 - Cleanup and separate tracking of the ISA space in the reserved
   low 64K of IO space. No ISA -> Nothing mapped there.

I booted a cell blade with IDE on PIO and MMIO and a dual G5 so
far, that's it :-)

With this patch, all allocations are done using the code in
mm/vmalloc.c, though we use the low level __get_vm_area with
explicit start/stop constraints in order to manage separate
areas for vmalloc/vmap, ioremap, and PCI IOs.

This greatly simplifies a lot of things, as you can see in the
diffstat of that patch :-)

A new pair of functions pcibios_map/unmap_io_space() now replace
all of the previous code that used to manipulate PCI IOs space.
The allocation is done at mapping time, which is now called from
scan_phb's, just before the devices are probed (instead of after,
which is by itself a bug fix). The only other caller is the PCI
hotplug code for hot adding PCI-PCI bridges (slots).

imalloc is gone, as is the "sub-allocation" thing, but I do beleive
that hotplug should still work in the sense that the space allocation
is always done by the PHB, but if you unmap a child bus of this PHB
(which seems to be possible), then the code should properly tear
down all the HPTE mappings for that area of the PHB allocated IO space.

I now always reserve the first 64K of IO space for the bridge with
the ISA bus on it. I have moved the code for tracking ISA in a separate
file which should also make it smarter if we ever are capable of
hot unplugging or re-plugging an ISA bridge.

This should have a side effect on platforms like powermac where VGA IOs
will no longer work. This is done on purpose though as they would have
worked semi-randomly before. The idea at this point is to isolate drivers
that might need to access those and fix them by providing a proper
function to obtain an offset to the legacy IOs of a given bus.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14 22:29:56 +10:00
Linas Vepstas
858955bd57 [POWERPC] Show EEH per-device false positives
Track and report the number of times we read an all-1s value (0xff,
0xffff or 0xffffffff) from each device which is valid data, not
indicating EEH isolation.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

----
 arch/powerpc/platforms/pseries/eeh.c       |    5 +++++
 arch/powerpc/platforms/pseries/eeh_sysfs.c |    3 +++
 include/asm-powerpc/pci-bridge.h           |    1 +
 3 files changed, 9 insertions(+)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14 22:29:55 +10:00
Linas Vepstas
c2e221e8b9 [POWERPC] pseries: asm/pci-bridge.h CONFIG_ minor cleanup
Use the correct CONFIG_ option to mark off the EEH bits.
Move the EEH bits to the bottom of the struct.
The config_space array is used by EEH only; it does not
need to be part of the struct for non-pseries machines.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

----
Revised patch, per commments from Michael Ellerman.

 include/asm-powerpc/pci-bridge.h |   16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14 22:29:55 +10:00
Ishizaki Kou
5b7c726ff0 [POWERPC] Add a field for each specific bus to struct pci_controller
Struct pci_controller doesn't prepare for the dependent data of each
specific bus. This patch adds private member to struct pci_controller.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 21:13:59 +11:00
Benjamin Herrenschmidt
396a1a5832 [POWERPC] Fix mmap of PCI resource with hack for X
The powerpc version of pci_resource_to_user() and associated hooks
used by /proc/bus/pci and /sys/bus/pci mmap have been broken for some
time on machines that don't have a 1:1 mapping of devices (basically
on non-PowerMacs) and have PCI devices above 32 bits.

This attempts to fix it as well as possible.

The rule is supposed to be that pci_resource_to_user() always converts
the resources back into a BAR values since that's what the /proc
interface was supposed to deal with. However, for X to work on
platforms where PCI MMIO is not mapped 1:1, it became a habit of
platforms like powerpc to pass "fixed up" values there since X expects
to be able to use values from /proc/bus/pci/devices as offsets to mmap
of /dev/mem...

So we keep that contraption here, causing also /sys/*/resource to
expose fully absolute MMIO addresses instead of BAR values, which is
ugly, but should still work as long as those are only used to calculate
alignment within a page.

X is still broken when built 32 bits on machines where PCI MMIO can be
above 32-bit space unfortunately.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08 17:21:06 +11:00
Benjamin Herrenschmidt
803d4573e6 [POWERPC] Add "parent" struct device for PCI host bridges
Add a "parent" struct device to our PCI host bridge data structure so that
PCI can be rooted off another device in sysfs.

Note that arch/ppc doesn't use it, only arch/powerpc, though it's available
for both 32 and 64 bits.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:38:47 +11:00
Dave Jones
038b0a6d8d Remove all inclusions of <linux/config.h>
kbuild explicitly includes this at build time.

Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-04 03:38:54 -04:00
Anton Blanchard
357518fa34 [POWERPC] pcibus_to_node fixes
of_node_to_nid returns -1 if the associativity cannot be found. This
means pcibus_to_cpumask has to be careful not to pass a negative index into
node_to_cpumask.

Since pcibus_to_node could be used a lot, and of_node_to_nid is slow (it
walks a list doing strcmps), lets also cache the node in the
pci_controller struct.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 19:31:26 +10:00
Stephen Rothwell
403fac4f83 [PATCH] powerpc: remove LogicalSlot from pci_dn
As we now store enough information in the device_node.

Also the Flags field was not used either, do remove that.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-24 16:08:56 +10:00
Stephen Rothwell
b025279316 [PATCH] powerpc: remove Irq from pci_dn
As we now store enough information in the device_node to allocate the
irq number in pcibios_final_fixup.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-24 16:08:56 +10:00
Stephen Rothwell
96ff6afaf1 [PATCH] powerpc: remove iSeries_Global_Device_List
We can now scan the list of device nodes instead.  This also allows us
to remove the Device_list member of struct pci_dn.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-24 16:08:56 +10:00
Stephen Rothwell
9623b5d3d3 [PATCH] powerpc: small pci cleanups
pcibios_claim_one_bus is not needed on iSeries and phbs_remap_io can be
mode static.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12 20:09:30 +11:00
Linas Vepstas
7684b40cb5 [PATCH] powerpc: Save device BARs much earlier in the boot sequence
241-eeh-save-bars-earlier.patch

Save the PCI device bars *before* any PCI probing is done.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
(cherry picked from 76c902b919098860f3d4e125f847abcc4cb1782a commit)
2006-01-10 15:30:39 +11:00
Linas Vepstas
25e591f6dd [PATCH] powerpc: Add "partitionable endpoint" support
26-eeh-partition-endpoint.patch

New versions of firmware introduce a new method by which the
"partitionable endpoint" (the point at which the pci bus is cut)
should be located.  This code adds the support for this (mandatory)
new feature.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
(cherry picked from 9fcfb5d35b5294659f9299aa9cae6fd16325c07e commit)
2006-01-10 15:29:14 +11:00
Arnd Bergmann
88ced03149 [PATCH] powerpc: sanitize header files for user space includes
include/asm-ppc/ had #ifdef __KERNEL__ in all header files that
are not meant for use by user space, include/asm-powerpc does
not have this yet.

This patch gets us a lot closer there. There are a few cases
where I was not sure, so I left them out. I have verified
that no CONFIG_* symbols are used outside of __KERNEL__
any more and that there are no obvious compile errors when
including any of the headers in user space libraries.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:13:08 +11:00
Benjamin Herrenschmidt
f2c4583a38 [PATCH] powerpc: pci_address_to_pio fix
This fixes pci_address_to_pio() to return an unsigned long (to be safe)
and fixes a bug in the implementation that caused it to return a bogus
IO port number

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:05:56 +11:00
linas
31087d7d49 [PATCH] powerpc: export PCI fixup routine
There is code in the RPAPHP directory that is identical to this routine;
I'll be removing that code in an upcoming patch, but this patch is needed
to expose the function to make it callable.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:54:02 +11:00
Benjamin Herrenschmidt
d2dd482bc1 [PATCH] powerpc: Update OF address parsers
This updates the OF address parsers to return the IO flags
indicating the type of address obtained. It also adds a PCI
call for converting physical addresses that hit IO space into
into IO tokens, and add routines that return the translated
addresses into struct resource

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:51:26 +11:00
Linas Vepstas
2bf6a8fa21 [PATCH] powerpc: migrate common PCI hotplug code
23-rpaphp-migrate.patch (parts)

This patch moves some pci device add & remove code from the PCI
hotplug directory to the arch/powerpc/kernel directory, and cleans
it up a tad. The primary reason for this is that the code performs
some fairly generic operations that are shared with the PCI error
recovery code (living in the arch/powerpc/kernel directory).

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:51:12 +11:00
Benjamin Herrenschmidt
463ce0e103 [PATCH] powerpc: serial port discovery (#2)
This moves the discovery of legacy serial ports to a separate file,
makes it common to ppc32 and ppc64, and reworks it to use the new OF
address translators to get to the ports early. This new version can also
detect some PCI serial cards using legacy chips and will probably match
those discovered port with the default console choice.

Only ppc64 gets udbg still yet, unifying udbg isn't finished yet.

It also adds some speed-probing code to udbg so that the default console
can come up at the same speed it was set to by the firmware.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:49:50 +11:00
Paul Mackerras
047ea78465 powerpc: Trivially merge several headers from asm-ppc64 to asm-powerpc
For these, I have just done the lame-o merge where the file ends up
looking like:

	#ifndef CONFIG_PPC64
	#include <asm-ppc/foo.h>
	#else
	... contents from asm-ppc64/foo.h
	#endif

so nothing has changed, really, except that we reduce include/asm-ppc64
a bit more.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-19 20:17:32 +11:00